12000/16-DC-PEM-RF

Double click on above image to view full picture

Zoom Out
Zoom In

12000/16-DC-PEM-RF

Description:

Cisco Refurbished
Original Part No : 12000/16-DC-PEM=

Cisco 12000 16-slot Enhanced DC PEM REMANUFACTURED
AED 0

Availability: Out of stock


Not Available

  • Add to Compare
  • Details

    Cisco XR 12000 and 12000 Series Product Portfolio Overview

    This portfolio of routers delivers capacity and services with its fully distributed forwarding architecture and high-efficiency crossbar switch fabric. The combination of a centralized scheduler and unique virtual-output-queuing (VOQ) technology is aimed at maximizing the use of the switch fabric bandwidth, minimizing latency, and providing non-blocking performance. Cisco uses the latest in high-performance application-specific integrated circuit (ASIC) technology to provide line-rate forwarding with an extensive feature set, while maintaining the strict control of jitter and latency required for real-time services. Offering a comprehensive set of quality-of-service (QoS), IP/MPLS, and high-availability features, the Cisco XR 12000 Series and 12000 Series routers can help ensure maximum bandwidth usage and traffic differentiation while meeting even the strictest customer service-level agreements (SLAs).
    The Cisco XR 12000 Series and 12000 Series routers use Cisco IOS ® XR Software and Cisco IOS Software, respectively, to deliver numerous service possibilities for network operators. With the addition of the Cisco XR 12000 Series to its high-end routing product lines, Cisco gives providers a graceful upgrade path for their installed base of Cisco 12000 Series routers as they transition toward a converged Cisco IP Next-Generation Network infrastructure. For a detailed list of feature support, software capabilities, compatibility, and release notes for Cisco IOS XR Software and Cisco IOS Software on these routers, visit:http://www.cisco.com/go/12000.
    A detailed list of enhancements for the new routers is outlined in Table 1:

    Table 1. Product Enhancements

     

     

    Chassis Enhancements

    Description

    Benefits

    New power supplies

    New power entry modules (PEMs), power distribution units (PDUs), and power shelves for 16-, 10-, and 6-slot chassis

    Increased chassis power budget to allow 100-percent slot fill of modular engines with non-redundant power configuration

    New cooling systems

    New fan trays for 16-, 10-, and 6-slot chassis

    Increased cooling for modular engines when operating under Network Equipment Building Standards (NEBS)/ETSI extended temperature range

    New chassis product IDs with new cosmetics

    New exterior bezels for 16-, 10-, 6-, and 4-slot chassis; chassis also includes new power supplies and cooling system

    Modernized chassis appearance

    New fabric cards

    Enhanced fabric for 2.5, 10, and 40 Gbps per slot (all chassis form factors)

    Building Integrated Timing Supply (BITS) and Single-Router Automatic Protection Switching (SR APS) enabled

     

    Note: The 4-slot chassis does not require new power supplies or cooling systems.

    Table 2 gives details of product specifications for the Cisco XR 12000 Series and 12000 Series routers.

    Figure 1. Cisco XR 12000 and 12000 Series Routing Portfolio with Cooling, Fabric, and Power Enhancements

    Table 2. Product Specifications

     

     

    Product Specification

    Cisco XR 12000 Series and 12000 Series 16-Slot Chassis

    Cisco XR 12000 Series and 12000 Series 10-Slot Chassis

    Cisco XR 12000 Series and 12000 Series 6-Slot Chassis

    Cisco XR 12000 Series and 12000 Series 4-Slot Chassis

    Slot capacity

    16 slots

    10 slots

    6 slots

    4 slots

    Aggregate switching capacity

    Cisco 12016: 80 Gbps

    Cisco 12416: 320 Gbps

    Cisco 12816: 1280 Gbps

    Cisco 12010: 50 Gbps

    Cisco 12410: 200 Gbps

    Cisco 12810: 800 Gbps

    Cisco 12006: 30 Gbps

    Cisco 12406: 120 Gbps

    Cisco 12004: 20 Gbps

    Cisco 12404: 80 Gbps

    Full-duplex throughput per slot

    Cisco 12016: 2.5 Gbps/slot

    Cisco 12416: 10 Gbps/slot

    Cisco 12816: 40 Gbps/slot

    Cisco 12010: 2.5 Gbps/slot

    Cisco 12410: 10 Gbps/slot

    Cisco 12810: 40 Gbps/slot

    Cisco 12006: 2.5 Gbps/slot

    Cisco 12406: 10 Gbps/slot

    Cisco 12004: 2.5 Gbps/slot

    Cisco 12404: 10 Gbps/slot

    Physical

    Chassis height

    • 71.68 in. (182.1 cm) 1
    • 77.56 in. (197.0 cm) 2

    Chassis width

    • 17.25 in. (43.8 cm)
    • 19 in. (48.24 cm) 3

    Chassis depth

    • 22.0 in. (55.9 cm)
    • 26.25 in. (66.7 cm) 4

    Weight

    • 140 lb (64 kg) 5
    • 412 lb (188.3 kg) 6
    • 160 lb (73 kg) 7
    • 440 lb (188.3 kg) 8

    Chassis height

    • 37.5 in. (95.25 cm)

    Chassis width

    • 17.25 in. (43.8 cm)
    • 19 in. (48.24 cm) 3

    Chassis depth

    • 22.0 in. (55.9 cm)
    • 26.5 in. (67.3 cm) 4

    Weight

    • 125 lb (57 kg) 5
    • 287 lb (130.9 kg) 6

    Chassis height

    • 18.5 in. (47.0 cm)

    Chassis width

    • 17.3 in. (43.9 cm)
    • 19 in. (48.24 cm) 3

    Chassis depth

    • 28.0 in. (71.1 cm)
    • 30.75 in. (78.1 cm) 4

    Weight

    • 140 lb (64 kg) 5
    • 213 lb (97.4 kg) 6

    Chassis height

    • 8.75 in. (22.23 cm)

    Chassis width

    • 17.38 in. (44.15 cm)
    • 19 in. (48.24 cm) 3

    Chassis depth

    • 27.5 in. (69.85 cm)
    • 30.75 in. (78.1 cm) 4

    Weight

    • 73 lb (33.18 kg) 5
    • 107.5 lb (48.86 kg) 6

    Chassis per rack

    One

    Two

    Four

    Eight

    Electrical Specifications for the AC Input Power

    Total AC input power

    5700 VA

    3180 VA

    2230 VA

    1310 VA

    Rated input voltage9

    200-240 VAC nominal (range: 170-264 VAC)

    200-240 VAC nominal (range: 170-264 VAC)

    200-240 VAC nominal (range: 170-264 VAC)

    100-120 VAC or 200-240 VAC nominal (range: 85-264 VAC)

    Rated input line frequency9

    50-60 Hz nominal (range: 47-63 Hz)

    50-60 Hz nominal (range: 47-63 Hz)

    50-60 Hz nominal (range: 47-63 Hz)

    50-60 Hz nominal (range: 47-63 Hz)

    Input current rating9

    13 A @ 200-240 VRMS per line cord (max)

    15 A @ 200-240 VRMS per line cord (max), (UK only: 13 A @ 220-240 VRMS)

    13 A @ 200-240 VRMS per line cord (max)

    12 A @ 100-240 VRMS per line cord (max)

    Source AC service requirement9

    20A North America; 16A international

    20A North America; 16A international

    20A North America; 16A international

    15A North America; 10A international

    Electrical Specifications for DC Input Power

    Total DC input power

    5580 W

    3260 W

    2290 W

    1290 W

    Rated input voltage9

    -48 VDC nominal in North America

    -48 VDC nominal in North America

    -48 VDC nominal in North America

    -48 VDC nominal in North America

    -60 VDC nominal in the European community (range: -40.5 to -72 VDC

    -60 VDC nominal in the European community (range: -40.5 to -72 VDC)

    -60 VDC nominal in the European community (range: -40.5 to -72 VDC)

    -60 VDC nominal in the European community (range: -40.5 to -72 VDC)

    Input current rating9

    60 A per feed (max) @ 48 VDC

    40 A per feed (max) 10@ 40.5 VDC

    60 A per feed (max) @ 40.5 VDC

    35 A per feed (max) @ 40.5 VDC

    Source DC requirement9

    Sufficient to supply the rated input current. Local codes apply.

    Environmental Conditions

    Temperature

    Operating: 32 to 104°F (0 to 40°C)

    Nonoperating: -4 to 149°F (-20 to 65°C)

    Operating: 32 to 104°F (0 to 40°C)

    Nonoperating: -4 to 149°F (-20 to 65°C)

    Operating: 32 to 104°F (0 to 40°C)

    Nonoperating: -4 to 149°F (-20 to 65°C)

    Operating: 32 to 104°F (0 to 40°C)

    Nonoperating: -40 to 158°F (-40 to 70°C)

    Humidity

    Operating: 10-90% noncondensing

    Nonoperating: 5-95% noncondensing

    Operating: 10-90% noncondensing

    Nonoperating: 5-95% noncondensing

    Operating: 10-90% noncondensing

    Nonoperating: 5-95% noncondensing

    Operating: 5-90% noncondensing

    Nonoperating: 5-95% noncondensing

    Altitude

    Operating: 0-10,000 ft. (0-3000m) 14

    Nonoperating: 0-15,000 ft. (0-4570m)

    Operating: 0-10,000 ft. (0-3000m) 14

    Nonoperating: 0-15,000 ft. (0-4570m)

    Operating: 0-10,000 ft. (0-3000m) 14

    Nonoperating: 0-15,000 ft. (0-4570m)

    Operating: 0-10,000 ft. (0-3000m) 14

    Nonoperating: 0-15,000 ft. (0-4570m)

    Heat dissipation

    AC (max): 5700W @ 19448 Btu/hr

    DC (max): 5580W @ 19039 Btu/hr

    AC (max): 3180W @ 10850 Btu/hr

    DC (max): 3260W @ 11123 Btu/hr

    AC (max): 2230W @ 7609 Btu/hr

    DC (max): 2290W @ 7813 Btu/hr

    AC (max): 1310W @ 4470 Btu/hr

    DC (max): 1290W @ 4401 Btu/hr

    Acoustic noise

    70 dBa maximum11 @ 77°F (25°C)

    70 dBa maximum @ 77°F (25°C)

    70 dBa maximum15 @ 77°F (25°C)

    70 dBa maximum @ 77°F (25°C)

    Shock12

    Operating (halfsine): 21 in./sec (0.53m/sec)

    Nonoperating (trapezoidal pulse): 20g, 52 in./sec (1.32 m/sec)

    Operating (halfsine): 21 in./sec (0.53m/sec)

    Nonoperating (trapezoidal pulse): 20g, 52 in./sec (1.32 m/sec)

    Operating (halfsine): 21 in./sec (0.53m/sec)

    Nonoperating (trapezoidal pulse): 20g, 52 in./sec (1.32 m/sec)

    Operating (halfsine): 5g (11 m/sec)

    Nonoperating (trapezoidal pulse):

    15g (11 m/sec)

    Vibration13

    Operating: 0.35 grms from 3 to 500 Hz

    Nonoperating: 1.0 grms from 3 to 500 Hz

    Operating: 0.35 grms from 3 to 500 Hz

    Nonoperating: 1.0 grms from 3 to 500 Hz

    Operating: 0.35 grms from 3 to 500 Hz

    Nonoperating: 1.0 grms from 3 to 500 Hz

    Operating (sinusoidal): 3-500 Hz @ 0.15 gpk (random): 2.5-200 Hz @ 0.33 grms

    Storage (sinusoidal): 10-500 Hz @ 0.8 gpk (random): 2.5-200 Hz @ 1.05 grms

    Hardware components (per base system)

    • 4 DC power supplies, or 3 AC supplies, or 4 AC power supplies
    • 1 performance router processor
    • 16 line-card slots with 15 line cards and 1 route processor or 14 line cards and 2 route processors (1:1 redundant)
    • 3 switch fabric cards (SFCs)
    • 2 clock scheduler cards (CSCs)
    • 2 alarm cards
    • Air filters
    • 2 blower assemblies
    • 2 cable-management trays
    • Country-specific power cords
    • 2 DC power supplies or 2 AC supplies
    • 1 performance router processor
    • 10 line-card slots with 9 line cards and 1 route processor or 8 line cards and 2 route processors (1:1 redundant)
    • 5 SFCs
    • 2 CSCs
    • 2 alarm cards
    • Air filter
    • 1 blower assembly
    • 1 cable-management tray
    • Country-specific power cords
    • 2 DC power supplies or 2 AC supplies
    • 1 performance router processor
    • 6 line-card slots with 5 line cards and 1 route processor or 4 line cards and 2 route processors (1:1 redundant)
    • 3 SFCs
    • 2 CSCs
    • 2 alarm cards
    • Air filter
    • 1 blower assembly
    • 1 cable-management tray
    • Country-specific power cords
    • 2 DC power supplies or 2 AC supplies
    • 1 performance router processor
    • 4 line-card slots with 3 line cards and 1 route processor or 2 line cards and 2 route processors (1:1 redundant)
    • 1 consolidated switch fabric, clock scheduler, and alarm card
    • Air filter
    • 1 blower assembly
    • 1 cable-management tray
    • Country-specific power cords

    Software components (per base system)

    • Cisco IOS XR or Cisco IOS Software Operating System
    • Cisco Express Forwarding for distributed packet forwarding
    • Cisco IOS XR or Cisco IOS Software Operating System
    • Cisco Express Forwarding for distributed packet forwarding
    • Cisco IOS XR or Cisco IOS Software Operating System
    • Cisco Express Forwarding for distributed packet forwarding
    • Cisco IOS XR or Cisco IOS Software Operating System
    • Cisco Express Forwarding for distributed packet forwarding

    Compatibility

    Cisco 12800: Line cards that support 2.5-, 10-, or 20-Gbps capability

    Cisco 12400: Line cards that support 2.5- or 10-Gbps capability

    Cisco 12000: Line cards that support 2.5-Gbps capability

    Protocols

    IPv4, MPLS, Border Gateway Protocol Version 4 (BGPv4), Intermediate System-to-Intermediate System (IS-IS), Open Shortest Path First Version 2.0 (OSPFv2.0), Routing Information Protocol Version 2 (RIPv2), Internet Group Management Protocol (IGMP), Distance Vector Multicast Routing Protocol (DVMRP), and Protocol Independent Multicast dense mode/sparse mode (PIM DX/SX)

    Connectivity

    Packet over SONET/SDH (POS), Ethernet, ATM, copper (DS-3/E3), Channelized (CT3, ChOC-3/CHSTM1, ChOC-12/CHSTM4, ChOC-48/CHSTM16); see Cisco IOS XR Software release notes for specific connectivity support on the Cisco XR 12000 Series

    Reliability

    System redundancy:

    • Fabric card redundancy 4:1
    • CSC redundancy 1:1
    • Power supply redundancy (1:1 for DC; AC is load balancing)
    • Blower redundancy 1:1
    • Route processor redundancy 1:1
    • Alarm card redundancy 1:1
    • Dual homing through line cards
    • Supports automatic protection switching (APS) ASICs

    Management interfaces

    Cisco XR 12000 and Cisco 12000 Series Performance Route Processor (PRP) supports two serial ports (console and auxiliary) and one 10/100 Ethernet port

    Indicators and Interfaces

    Visual alarms for critical, major, and minor states on CSCs, SFCs, and on or error condition for system alarm boards

    Compliance

    Safety certification:

    • UL/CSA/IEC/EN 60950-1 or UL/CSA/IEC/EN 60950
    • AS/NZS 60950.1 or AS/NZS 60950
    • EN60825/IEC60825 laser safety
    • FDA-Code of Federal Regulations (USA) laser safety

    Electromagnetic interference standards (emissions):

    • FCC Class A
    • CISPR 22 Class A
    • ICES-003 Class A
    • EN55022 Class A
    • VCCI Class A
    • AS/NZS Class A
    • BSMI Class A
    • IEC/EN61000-3-2 Power Line Harmonics
    • IEC/EN61000-3-3 Voltage Fluctuations and Flicker

    Immunity:

    • IEC/EN61000-4-2, Electro Static Discharge (8kV contact, 15kV air)
    • IEC/EN61000-4-3, Radiated Immunity (10V/m)
    • IEC/EN61000-4-4, Electrical Fast Transient Immunity (2kV power port, 1kV signal port)
    • IEC/EN61000-4-5, Surge AC Port (4kV CM, 2kV DM)
    • IEC/EN61000-4-5, Surge Signal Port (1kV indoor, 2kV outdoor)
    • IEC/EN61000-4-5, Surge DC Port (1kV)
    • IEC/EN61000-4-6, Immunity to Conducted Disturbances (10Vrms)
    • IEC/EN61000-4-11, Voltage Dips, Short Interruptions, and Voltage Variations

    Network Equipment Building Standards (NEBS)

    This product is designed to meet the following requirements

    (Qualification complete or in progress):

    • GR-1089-CORE NEBS EMC and Safety
    • GR-63-CORE NEBS Physical Protection
    • SR-3580 NEBS Criteria Levels (Level 3)

    ETSI and EN

    • EN300386 Telecommunications Network Equipment (EMC)
    • EN55022 Information Technology Equipment (Emissions)
    • EN55024 Information Technology Equipment (Immunity)
    • EN50082-1/EN61000-6-1 Generic Immunity Standard
    • EN300132-2 Environment Engineering Part 2: Operated by direct current (dc)

     

    1 Total height for the 4xDC and 3xAC systems without the top lip and bottom feet. Add 0.37 inches for the top lip of the power shelf and add 0.23 inches for bottom feet.

    2 Total height for the 4xAC system without the top lip and bottom feet. Add 0.37 inches for the top lip of the power shelf and add 0.23 inches for bottom feet.

    3 Including chassis rack-mount flanges and front door width

    4 Including cable-management system and front door

    5 Chassis only (includes power shelf for 16-slot chassis)

    6 Chassis fully configured, using all card slots, AC or DC power supplies (and power shelf for 16-slot chassis), and doors and hinges

    7 16-slot Chassis only for the 4xAC system (includes power shelf)

    8 16-slit Chassis fully configured for the 4xAC system, using all card slots, AC power supplies and power shelf, doors and hinges

    9 For each of the power supply modules

    10 10-slot chassis DC power supply module includes two feeds; all other chassis DC power module include one feed

    11 With adaptive fan speed control

    12 g is a value of acceleration, where 1g equals 32.17 ft/sec2 (9.81 m/sec2)

    13 grms is root mean square value of acceleration; gpk is peak acceleration

    14 Chassis compliant with GR-63 issue 3 (section 4.1.3): equipment functional at elevations up to 6,000 ft above sea level at aisle-ambient temperature of 50°C; equipment functional at elevations up to 10,000 ft above sea level at aisle-ambient temperature of 30°C

    15 NEBS qualification in progress and acoustic noise value subject to change

    Availability and Ordering

    Ordering Information

    Table 3 gives ordering information for the Cisco XR 12000 Series and 12000 Series routers with cooling, fabric, and power enhancements, which are currently available. All hardware listed below is fully forward compatible with IOS XR software.

    Table 3. Table 3: Ordering Information for Cisco XR 12000 Series and Cisco 12000 Series

     

     

    Product Descriptions

    Part Number

    Note: a complete system must include the selection of one slot-capacity option, one power supply option, one switch fabric option and one route processor option

    Cisco XR 12000 and 12000 router slot-capacity options

    Cisco XR 12000 16-slot Chassis (configured with IOS XR software)

    XR-12000/16

    Cisco XR 12000 10-slot Chassis (configured with IOS XR software)

    XR-12000/10

    Cisco XR 12000 6-slot Chassis (configured with IOS XR software)

    XR-12000/6

    Cisco XR 12000 4-slot Chassis (configured with IOS XR software)

    XR-12000/4

    Cisco 12000 16-slot Chassis (configured with IOS software)

    12000/16

    Cisco 12000 10-slot Chassis (configured with IOS software)

    12000/10

    Cisco 12000 6-slot Chassis (configured with IOS software)

    12000/6

    Cisco 12000 4-slot Chassis (configured with IOS software)

    12000/4

    Cisco XR 12000 and 12000 router power supply options

    Cisco 12000 16-slot Chassis with 4 Enhanced AC Power Supplies, 2 Enhanced Blowers, and 2 Alarms

    12000/16-AC4

    Cisco 12000 16-slot Chassis with 3 Enhanced AC Power Supplies, 2 Enhanced Blowers, and 2 Alarms

    12000/16-AC3

    Cisco 12000 16-slot Chassis with 4 Enhanced DC Power Supplies, 2 Enhanced Blowers, and 2 Alarms

    12000/16-DC

    Cisco 12000 10-slot Chassis with 2 Enhanced AC Power Supplies, 1 Enhanced Blower, and 2 Alarms

    12000/10-AC

    Cisco 12000 10-slot Chassis with 2 Enhanced DC Power Supplies, 1 Enhanced Blower, and 2 Alarms

    12000/10-DC

    Cisco 12000 6-slot Chassis with 2 Enhanced AC Power Supplies, 1 Enhanced Blower, and 2 Alarms

    12000/6-AC

    Cisco 12000 6-slot Chassis with 2 Enhanced DC Power Supplies, 1 Enhanced Blower, and 2 Alarms

    12000/6-DC

    Cisco 12000 4-slot Chassis with 2 AC Power Supplies, and 1 Blower

    12000/4-AC

    Cisco 12000 4-slot Chassis with 2 DC Power Supplies, and 1 Blower

    12000/4-DC

    Cisco XR 12000 and 12000 router switch fabric options

    80-Gbps Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 16-slot Chassis

    12016/80

    80-Gbps Enhanced Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 16-slot Chassis

    12016E/80

    320-Gbps Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 16-slot Chassis

    12416/320

    320-Gbps Enhanced Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 16-slot Chassis

    12416E/320

    1280-Gbps Enhanced Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 16-slot Chassis

    12816E/1280

    50-Gbps Fabric with 2 CSC and 5 SFC Cards for Cisco 12000 10-slot Chassis

    12010/50

    50-Gbps Enhanced Fabric with 2 CSC and 5 SFC Cards for Cisco 12000 10-slot Chassis

    12010E/50

    200-Gbps Fabric with 2 CSC and 5 SFC Cards for Cisco 12000 10-slot Chassis

    12410/200

    200-Gbps Enhanced Fabric with 2 CSC and 5 SFC Cards for Cisco 12000 10-slot Chassis

    12410E/200

    800-Gbps Enhanced Fabric with 2 CSC and 5 SFC Cards for Cisco 12000 10-slot Chassis

    12810E/800

    30-Gbps Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 6-slot Chassis

    12006/30

    30-Gbps Enhanced Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 6-slot Chassis

    12006E/30

    120-Gbps Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 6-slot Chassis

    12406/120

    120-Gbps Enhanced Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 6-slot Chassis

    12406E/120

    20-Gbps Enhanced Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 4-slot Chassis

    12004E/20

    80-Gbps Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 4-slot Chassis

    12404/80

    80-Gbps Enhanced Fabric with 2 CSC and 3 SFC Cards for Cisco 12000 4-slot Chassis

    12404E/80

    Cisco XR 12000 and 12000 router route processor options

    Cisco 12000 Performance Route Processor 1

    PRP-1

    Cisco 12000 Performance Route Processor 2

    PRP-2

    Cisco 12000 Redundant Performance Route Processor 1

    PRP-1/R

    Cisco 12000 Redundant Performance Route Processor 2

    PRP-2/R

    Cisco XR 12000 Performance Route Processor 2

    XR-PRP-2

    Cisco XR 12000 Redundant Performance Route Processor 2

    XR-PRP-2/R

    Additional Information

    SKU 12000/16-DC-PEM-RF
    Weight (Kg) 64
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/xr-12000-series-router/product_data_sheet0900aecd80303d86.html
    Condition Refresh
    Module Type Power Entry Module

    12000/16-DC-PEM-RF

    AED

    AED 0

    0