15454-AD-4C30.3-RF

Double click on above image to view full picture

Zoom Out
Zoom In

15454-AD-4C30.3-RF

Description:

Cisco Refurbished
Original Part No : 15454-AD-4C-30.3=

15454 OADM-4Chs-100GHz30.33-31.12-31.90-32.68 REMANUFACTURED
AED 0

Availability: Out of stock


Not Available

  • Add to Compare
  • Details

    The Cisco® ONS 15454 Multiservice Transport Platform (MSTP) provides a comprehensive, intelligent dense wavelength-division multiplexing (DWDM) solution for expanding metropolitan-area (metro) and regional bandwidth.

    Product Overview

    The Cisco ONS 15454 MSTP offers a comprehensive selection of fixed optical filters, shown in Figure 1, for delivering the correct amount of bandwidth to each service location in a metro or regional network. The fixed filter cards are part of the Cisco ONS 15454 MSTP intelligent DWDM architecture for reducing DWDM complexity and speeding the deployment of next-generation networking solutions.

    Figure 1

    Fixed Optical Filter Family
    Plug-in modules that deliver flexible access to network bandwidth from a single DWDM channel all the way to 32 channels, Cisco ONS 15454 fixed optical filter cards support the requirements of service provider and enterprise networks. Table 1 outlines the module types available for the Cisco ONS 15454 MSTP with the applications they are designed to support.

    Table 1. Optical Filter Cards with Applications

     

     

    Component

    Deployment Application

    32-channel multiplexer and demultiplexer

    This product provides wavelength access (on or off ramp) for all the channels in a fiber cable. Typical deployment locations are terminal hub sites, including service provider central offices or enterprise telecommunications facilities.

    Band-optical add/drop filters (B-OADM)

    These filters allow access (add/drop) to a band or bands of frequencies from a fiber cable while passing the remaining frequencies. They are typically deployed at intermediate sites where access to greater bandwidth is required. They can also be inserted where future access to bandwidth may be required.

    Channel-optical add/drop filters (C-OADM)

    These filters enable access (add/drop) to individual wavelengths from a fiber cable while allowing the remaining frequencies to pass. They are deployed at intermediate sites where access to individual wavelengths is necessary. They can be cascaded to provide from 1- to 32-channel add/drop capabilities.

    4-channel multiplexer/demultiplexer (4MD)

    This product provides wavelength access (on or off ramp) to four channels from a band-OADM filter. They are deployed at intermediate sites where access to individual wavelengths is necessary.

     

    The Cisco ONS 15454 fixed filter cards are based on the ITU 100-GHz wavelength plan. Each card integrates software-controllable variable optical attenuators (VOAs), providing automatic node- and network-based power level management. The optical cards incorporate LEDs on the faceplate to provide a quick visual check of the card's operational status. An icon on each faceplate is mapped to shelf-slot icons indicating the shelf slot where the card can be installed. The cards are supported by the integrated Cisco Transport Controller craft manager, which provides the user access for operations, administration, maintenance, and provisioning for the system.
    All Cisco ONS 15454 fixed optical filter cards can drop and reinsert a wavelength without needing to regenerate the signal (optical bypass). This unique capability is supported at individual channel and band level and allows creation of multiring or mesh traffic matrixes using the available fixed filter cards.
    The choice of filters depends on the requirements of the network. The Cisco MetroPlanner optical design tool is available to assist in the engineering, bill-of-material development, and deployment of the DWDM network. Figures 2 through 5 show sample signal-flow diagrams for a selection of Cisco ONS 15454 MSTP node types, outlining the use for each filter type.

    Figure 2

    MSTP Hub Node

    Figure 3

    Terminal Node

    Figure 4

    Active Optical Add/Drop Multiplexer (OADM) Node

    Product Specifications

    Tables 2 through 7 give specifications of the Cisco ONS 15454 fixed optical filters. Figures 5 through 9 are functional diagrams of the fixed optical filters.

    Table 2. Regulatory Compliance1

     

     

    ANSI System

    ETSI System

    Countries

    Canada, United States, Mexico, Korea, Japan, European Union

    European Union, Australia, New Zealand, Singapore, China, Mexico, Hong Kong, Korea

    EMC emissions (radiated, conducted)
    • ICES-003
    • GR-1089-CORE
    • 47CFR15
    • VCCI V-3/2000.04
    • CISPR24
    • EN 300 386-TC
    • EN50081-1
    • EN55022
    • AS/NZS3548, Amendment 1 + 2 1995
    EMC immunity
    • GR-1089-CORE
    • CISPR24
    • EN50082-2
    • EN300-386-TC
    • EN55024
    Safety
    • CAN/CSA-C22.2 No. 60950-00 Third Ed., 12/1/2002
    • GR-1089-CORE
    • GR-63-CORE
    • TS001
    • UL 60950 Third Ed., 12/1/2000
    • EN60950 (to A4)
    • IEC60950/EN60950, Third Ed.
    • AS/NZS3260 Supplement 1, 2, 3, 4, 1997
    Environmental
    • GR-63-CORE
    • AT&T Network Equipment Design Specifications (NEDS)
    • ETS 300-019 (Class 3.1E) (Note 2)
    Structural dynamics
    • GR-63-CORE
    • AT&T NEDS
    • ETS 300-019 (Class 3.1E) (Note 2)
    Power and grounding
    • SBC (TP76200MP)
    • ETS 300-132-1 (DC power)
    • ETS 300-253 (grounding)
    Optical
    • GR-253-CORE
    • G.692
     
    Quality
    • TR-NWT-000332, Issue 4, Method 1 calculation for 20-year mean time between failure (MTBF)

     

    Table 3. System Requirements

     

     

    Component

    Cisco ONS 15454 ANSI

    Cisco ONS 15454 ETSI

    Processor

    TCC2P/TCC2

    TCC2P/TCC2

    Cross-connect

    All (not required)

    All (not required)

    Shelf assembly

    15454-SA-HD or 15454-SA-HD-DDR shelf assembly with FTA3 version fan-tray assembly

    15454-SA-ETSI shelf assembly with SDH 48V fan-tray assembly

    System software

    Release 4.6.0 ANSI or later

    Release 4.6.0 ETSI or later

     

    Table 4. Common Fixed Optical Filter Specifications

     

     

    Specification

    32-Channel Multiplexer

    32-Channel Demultiplexer

    4-Channel Multiplexer/ Demultiplexer

    Channel OADM Cards

    Band OADM Cards

    Management

    Card LEDs

    Failure (FAIL)
    Active/standby (ACT/STBY)
    Signal fail (SF)

    Red

    Green/yellow

    Yellow

    Red

    Green/yellow

    Yellow

    Red

    Green/yellow

    Yellow

    Red

    Green/yellow

    Yellow

    Red

    Green/yellow

    Yellow

    Operating environment

    Temperature

    -5 to 55°C

    23 to 131°F

    -5 to 55°C

    23 to 131°F

    -5 to 55°C

    23 to 131°F

    -5 to 55°C

    23 to 131°F

    -5 to 55°C

    23 to 131°F

    Humidity

    5 to 95% RH

    5 to 95% RH

    5 to 95% RH

    5 to 95% RH

    5 to 95% RH

    Storage environment

    Temperature

    -40 to 85°C

    -40 to 185°F

    -40 to 85°C

    -40 to 185°F

    -40 to 85°C

    -40 to 185°F

    -40 to 85°C

    -40 to 185°F

    -40 to 85°C

    -40 to 185°F

    Humidity

    5 to 95% RH

    5 to 95% RH

    5 to 95% RH

    5 to 95% RH

    5 to 95% RH

     

    Multiplexer and Demultiplexer Filters

    Figure 5

    Functional Diagrams of 32-Channel Multiplexer and 32-Channel Demultiplexer

    Figure 6

    Functional Diagram of 4-Channel Multiplexer/Demultiplexer

    Table 5. Specifications for 32-Channel Multiplexer, 32-Channel Demultiplexer, and 4-Channel Multiplexer/Demultiplexer

     

     

    Specification

    32-Channel Multiplexer

    32-Channel Demultiplexer

    4-Channel Multiplexer/Demultiplexer

    Optical parameters

    Insertion loss (maximum at minimum VOA)

    Drop or add
    Monitor

     

    8.5 dB

    29.5 dB

     

    8.5 dB

    -

     

    3.6 (multiplexer), 3.2 (demultiplexer)

    -

    VOA dynamic range

    25 dB

    25 dB

    30 dB

    Maximum input power

    25 dBm

    25 dBm

    25 dBm

    Filter type

    Array wave guide (AWG)

    AWG

    Interferential

    Minimum transmit filter passband (at 0.5 dB resolution bandwidth)

    ±0.18 nm

    ±0.18 nm

    ±0.18 nm

    Adjacent crosstalk
    (all operating conditions and attenuation values)

    23 dB

    23 dB

    25 dB

    Non-adjacent crosstalk
    (all operating conditions and attenuation values)

    30 dB

    30 dB

    38 dB

    Total crosstalk

    20 dB

    20 dB

    22 dB

    Maximum polarization dependent loss (PDL)
    (all operating conditions and attenuation values)

    1.6 dB

    1.6 dB

    0.7 dB

    Optical power setting accuracy
    (all operating conditions and attenuation values)

    ±0.5 dB

    ±0.5 dB

    ±0.5 dB

    Minimum return loss

    40 dB

    40 dB

    40 dB

    Connectors

    Channel input (multiplexer) and output (demultiplexer) ports

    Composite ports

    Monitor ports

    MPO

    LC

    LC

    MPO

    LC

    -

    LC

    LC

    -

    Power

    Card power draw

    Typical
    Maximum

    16W

    31W

    16W

    31W

    17W

    25W

    Physical

    Size

    2 slots

    2 slots

    1 slot

    Supported shelf slots

    1-6, 12-17

    1-6, 12-17

    1-6, 12-17

     

    Optical Add/Drop Filters

    Figure 7

    Functional Diagrams for One and Two-Channel OADM

    Figure 8

    Functional Diagram for Four-Channel OADM Functional Diagrams

    Table 6. Channel OADM Filter Specifications

     

     

    Specification

    One-Channel OADM

    Two-Channel OADM

    Four-Channel OADM

    Optical parameters

    Insertion loss (maximum)

    Drop (maximum)
    Add (at minimum VOA)
    Express (maximum from express input to composite output)
    Express (maximum from composite input to express output)

    2 dB

    2.6 dB

    1.2 dB

    2.4 dB

    2.4 dB

    3.1 dB

    1.6 dB

    2.7 dB

    5.5 dB

    4.9 dB

    1.2 dB

    2.7 dB

    VOA dynamic range

    30 dB

    30 dB

    30 dB

    Maximum input power

    25 dBm

    25 dBm

    25 dBm

    Filter type

    Interferential

    Interferential

    Interferential

    Minimum transmit filter passband (at 0.5 dB resolution bandwidth)

    +0.18 nm

    +0.18 nm

    +0.18 nm

    Adjacent crosstalk
    (all operating conditions and attenuation values)

    25 dB

    25 dB

    25 dB

    Non-adjacent crosstalk
    (all operating conditions and attenuation values)

    38 dB

    38 dB

    38 dB

    Total crosstalk

    22 dB

    22 dB

    22 dB

    Maximum polarization dependent loss (PDL)
    (all operating conditions and attenuation values)

    0.7 dB

    0.7 dB

    0.7 dB

    Optical power setting accuracy
    (all operating conditions and attenuation values)

    +0.5 dB

    +0.5 dB

    +0.5 dB

    Minimum return loss

    40 dB

    40 dB

    40 dB

    Connectors

    Input/output ports

    Monitor ports

    LC

    LC

    LC

    LC

    LC

    LC

    Power

    Card power draw

    Typical
    Maximum

    17W

    25W

    17W

    25W

    17W

    25W

    Physical

    Size

    1 slot

    1 slot

    1 slot

    Supported shelf slots

    1-6, 12-17

    1-6, 12-17

    1-6, 12-17

     

    Figure 9

    One- and Four-Band OADM Functional Diagrams

    Table 7. Band OADM Filter Specifications

     

     

    Specification

    One-Band OADM

    Four-Band OADM

    Optical parameters

    Insertion loss (maximum)

    Drop path (at minimum VOA)
    Add path
    Express - From express input to composite output
    Express - From composite input to express output (at minmum VOA)

    3 dB

    2.2 dB

    1.6 dB

    2.9 dB

    4.5 dB

    3.5 dB

    3 dB

    4.9 dB

    VOA dynamic range

    30 dB

    30 dB

    Maximum input power

    25 dBm

    25 dBm

    Filter type

    Interferential

    Interferential

    Minimum filter passband (at -1 dB)

    3.49 nm

    3.49 nm

    Adjacent crosstalk
    (all operating conditions and attenuation values)

    25 dB

    25 dB

    Non-adjacent crosstalk
    (all operating conditions and attenuation values)

    35 dB

    35 dB

    Maximum polarization dependent loss (PDL)
    (all operating conditions and attenuation values)

    0.7 dB

    0.7 dB

    Optical power setting accuracy
    (all operating conditions and attenuation values)

    +0.5 dB

    +0.5 dB

    Connectors

    Input/output ports

    Monitor ports

    LC

    LC

    LC

    LC

    Power

    Card power draw

    Typical
    Maximum

    17W

    25W

    17W

    25W

    Physical

    Size

    1 slot

    1 slot

    Supported shelf slots

    1-6, 12-17

    1-6, 12-17

     

    Ordering Information

    Tables 8 and 9 give ordering information for the Cisco ONS 15454 MTSP optical fixed filter cards.

    Table 8. System Ordering Information2

     

     

    Part Number

    Description

    15454-32MUX-O=

    32-channel multiplexer card, C-band, 100-GHz, MPO connectors for add path, LC connector for interconnection

    15454-32DMX-O=

    32-channel demultiplexer card, C-band, 100-GHz, MPO connectors for drop path, LC connectors for interconnection, includes one 2-m LC/LC fiber-optic cables

    15454-4MD-xx.x=

    4-channel multiplexer and demultiplexer card, C-band, 100-GHz, LC connectors, includes two 2-m LC/LC fiber-optic cables

    15454-AD-1C-xx.x=

    1-channel OADM, C-band, 100-GHz, LC connectors, includes two 2-m LC/LC fiber-optic cables

    15454-AD-2C-xx.x=

    2-channel OADM, C-band, 100-GHz, LC connectors, includes two 2-m LC/LC fiber-optic cables

    15454-AD-4C-xx.x=

    4-channel OADM, C-band, 100-GHz, LC connectors, includes two 2-m LC/LC fiber-optic cables

    15454-AD-1B-xx=

    1-band OADM, C-band, 100-GHz, LC connectors, includes two 2-m LC/LC fiber-optic cables

    15454-AD-4B-xx=

    4-band OADM, C-band, 100-GHz, LC connectors, includes two 2-m LC/LC fiber-optic cables

     

    Table 9. Wavelength Ordering Information (value to use for part number in Table 8)

     

     

    Wavelength (nm)

    Cisco 32-Channel Plan

    AD-1C

    AD-2C

    AD-4C

    AD-1B

    AD-4B

    1530.33

    X

    30.3

    30.3

    30.3

    30.3

    30.3

    1531.12

    X

    31.1

    1531.90

    X

    31.9

    31.9

    1532.68

    X

    32.6

    1534.25

    X

    34.2

    34.2

    34.2

    34.2

    1535.04

    X

    35.0

    1535.82

    X

    35.8

    35.8

    1536.61

    X

    36.6

    1538.19

    X

    38.1

    38.1

    38.1

    38.1

    1538.98

    X

    38.9

    1539.77

    X

    39.7

    39.7

    1540.56

    X

    40.5

    1542.14

    X

    42.1

    42.1

    42.1

    42.1

    1542.94

    X

    42.9

    1543.73

    X

    43.7

    43.7

    1544.53

    X

    44.5

    1546.12

    X

    46.1

    46.1

    46.1

    46.1

    46.1

    1546.92

    X

    46.9

    1547.72

    X

    47.7

    47.7

    1548.51

    X

    48.5

    1550.12

    X

    50.1

    50.1

    50.1

    50.1

    1550.92

    X

    50.9

    1551.72

    X

    51.7

    51.7

    1552.52

    X

    52.5

    1554.13

    X

    54.1

    54.1

    54.1

    54.1

    1554.94

    X

    54.9

    1555.75

    X

    55.7

    55.7

    1556.55

    X

    56.5

    1558.17

    X

    58.1

    58.1

    58.1

    58.1

    1558.98

    X

    58.9

    1559.79

    X

    59.7

    59.7

    1560.61

    X

    60.6

    Additional Information

    SKU 15454-AD-4C30.3-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/optical-networking/ons-15454-series-multiservice-provisioning-platforms/product_data_sheet09186a00801a5572.html
    Condition Refresh
    Module Type Optical Add/Drop Multiplexer

    15454-AD-4C30.3-RF

    AED

    AED 0

    0