Double click on above image to view full picture

Zoom Out
Zoom In



Cisco Refurbished
Original Part No : 15454-DS3-12E=

DS3, Enhanced PM, 12 Ckt, I-Temp REMANUFACTURED

Availability: Out of stock

Not Available

  • Add to Compare
  • Details

    Data Sheet

    Cisco ONS 15454 Enhanced
    DS3 Interface Cards

    DS3 services remain one of the most popular service interfaces requested by service providers. The Cisco ONS 15454 Enhanced DS3 Interface Cards are a quick and cost-effective solution for DS3 service requirements.

    DS3 services have continued to be popular with service providers not only because the service is a significant source of revenue, but also because DS3 services meet the following needs:

    High bandwidth—Accommodates bandwidth-intensive applications such as video-conferencing

    Channelization—Businesses can choose to partition their DS3 into multiple channels to simultaneously transport multiple calls or lower-speed applications. By channelizing their DS3, customers can use it to aggregate many of their transport needs onto one circuit, optimizing their network and saving money

    Flexibility—Using network management software, service providers can dynamically change their DS3 network cross-connections from the convenience of their network operations center (NOC) or from the central office (CO)

    Reliability—DS3 service is virtually error-free and exhibits high availability

    Simplicity—DS3 is a mature and well-tested interface that is simple to design and implement; the service is widely deployed in businesses and is well known and trusted by data and telecommunications service decision-makers

    Data integrity—DS3 provides an environment for secure and accurate information transfer

    Cisco ONS 15454 can concentrate a large number of edge DS3 traffic streams into one large "pipe" before handing them off to core switches and routers. (See Figure 1.) This capability not only dramatically reduces the number of ports required on core switches, but also greatly reduces the cost and complexity in the edge by providing a high port fan-out and distribution network.

    The Cisco ONS 15454 DS3 Card, with Enhanced Performance Monitoring , gives service providers improved network visibility, providing them a means of early facility failure detection. It also allows service providers to continue to provide the highest levels of service availability through service guarantees.

    Figure 1 DS3 Aggregation


    The new Enhanced DS3-12E and the DS3N-12E cards can be installed in any of the Cisco ONS 15454 shelf assembly's 12 multiservice interface slots. Both the DS3-12E and the DS3N-12E cards provide 12 Telcordia compliant, GR-499-CORE DS3 interfaces that operate at 44.736 Mbps over a single 75-ohm 728A (or equivalent coaxial span). The DS3-12E card can be provisioned as a working or protect card in a 1:1 protect scheme or as working card in 1:N protection scheme. The DS3N-12E can operate as a working or as a protection card in either 1:1 or 1:N protection schemes. The DS3N-12E can protect up to five working DS3-12E or DS3N-12 cards. Other than the protection capability, the DS3-12E functions in the same manner as the DS3N-12E.

    In addition to providing electrical DS3 equivalents, the enhanced DS3 cards allow greater performance monitoring capabilities than the previous generation DS3(N)-12 cards. The DS3-12E and DS3N-12E detects several different logic bits that may be in error within a DS3 frame, allowing the Cisco ONS 15454 to identify a degrading DS3 facility caused by upstream electronics (such as DS3 framer). In addition to providing Bipolar with Three-Zero Substitution (B3ZS) error monitoring on the facility, the DS3-12E and the DS3N-12E provide the following enhanced feature set:

    Provisionable framing format M13, C-bit, or unframed

    Auto recognition and provisioning of incoming framing

    P-bit monitoring

    C-bit parity monitoring

    X-bit monitoring

    M-bit monitoring

    F-bit monitoring

    Far-end block errors (FEBE) monitoring

    Far-end alarm and control (FEAC) status and loop code detection

    Path trace byte support with TIM-P alarm generation

    Additional specifications of the Enhanced DS3(N)-12E are listed in Table 1.

    Table 1  Technical Specifications

    ParameterDS3 Interface
    Facilities per card


    Card protection capability

    1:1 or 1:N (N is less than 6)

    N card installed in slots 3 or 15

    Working facilities per shelf

    144 max. unprotected DS3s using the DS3-12E

    120 max. using two groups of 5 working DS3-12E and one DS3N-12E

    72 max. using the DS3-12E with 1:1 protection

    Data rate

    44.736 Mbps, +/- 20ppm

    Line build-out

    0 to 225 ft

    226 to 450 ft

    (accessed through rear EIA panels)

    75-ohm Bayonet Nut Connector (BNC) or Sub Miniature Connector (SMB)


    Unbalanced coax

    Loopback modes

    Terminal and facility

    Facility protection

    Protected (1:1 or 1:N, N is equal to or less than 5)

    Unprotected (0:1)

    Card level indicators:

    Red "Fail" LED

    Green "ACT/STBY" LED

    Yellow "SF" LED

    Hardware problem

    Card ready to carry traffic

    Signal failure for Loss of Signal (LOS), Loss of Frame (LOF) 
    or high Bit Error Rates (BER)

    BER Measurements



    Single width

    12.65 x .716 x 9 in. (H x W x D)

    Power consumption











    -40° to 149°F (-40° to 65°C)

    -40° to 185°F (-40° to 85°C)

    5 to 95%, noncondensing

    5 to 95%, noncondensing


    AIS TR-TSY-000191, GR-499-CORE, GR-253-CORE, ANSI T1.107.1988

    Minimum required system software

    ONS 15454 Release 3.0 or greater




    Product NameDescription

    DS3 card, enhanced performance monitoring


    DS3 card, 1:N protection (N is less than 6), enhanced performance monitoring

    Additional Information

    SKU 15454-DS3-12E-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/en/US/products/hw/optical/ps2006/products_data_sheet09186a00800886c7.html
    Condition Refresh
    Module Type Optical Networking Module



    AED 0