15454-TCC3-K9-RF

Double click on above image to view full picture

Zoom Out
Zoom In

15454-TCC3-K9-RF

Description:

Cisco Refurbished
Original Part No : 15454-TCC3-K9=

Timing,Comms,Cntrol Three,I-temp,15454chassis REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 3500

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Product Overview

    The Cisco® Timing, Communications, and Control Version Three (TCC3) card (Figure 1) provides a next-generation system processor for the Cisco ONS 15454 Multiservice Transport Platform (MSTP) while still being usable in the Cisco ONS 15454 Multiservice Provisioning Platform (MSPP). The Cisco TCC3 card performs system initialization, provisioning, alarm reporting, maintenance, diagnostics, IP address detection and resolution, SONET and SDH data communications channel (DCC) termination, system DC input-voltage monitoring, and system fault detection. The card resides in slots 7 and 11 of the shelf assembly, providing 1:1 equipment protection.

    The Cisco TCC3 card has more memory than the preceding TCC2 and TCC2P cards to accommodate extra features when used in a master Cisco ONS 15454 MSTP node. The TCC3 is only required when used as an MSTP master node when more than 12 shelves are subtended to it, and is recommended when subtending one or more Cisco ONS 15454 M6 nodes. The Cisco TCC3 can be used in all other Cisco ONS 15454 MSTP or MSPP applications but is not mandatory.

    The Cisco TCC3 card incorporates a highly stable Stratum 3 internal timing reference to provide system timing based on input received from an external Building Integrated Timing Supply (BITS) source or from an incoming SONET or SDH optical signal. Synchronous status messaging helps the system to select the best timing sources, and a holdover mode maintains timing accuracy in the event that pre-provisioned synchronization references are not available.

    Figure 1. Cisco ONS 15454 TCC3 Card

    Nonvolatile database storage for communication, provisioning, and system control is provided, allowing full database recovery and survivability with complete system power loss. In addition, short-term clock recovery is also supported, reducing the need to reset the calendar and time-of-day settings after a brownout or complete power outage.

    The Cisco TCC3 card has two built-in interface ports for accessing the system: an RJ-45 connector and an RS-232. The RJ-45 port provides 10BASE-T Ethernet connectivity to the system, for local and remote access to the craft-management system, Cisco Transport Controller, through a common web interface. This port can also be used for interconnection to customer operations support systems (OSSs) and network management systems (NMSs), providing integration to external element management systems (EMSs), NMSs, and OSSs.

    The Cisco TCC3 card provides additional security enhancements, allowing users to configure the front-panel and rear or Front Mount Electrical Connection (FMEC) Ethernet interfaces as regenerators or provision them with individual IP and MAC addresses for segregated craft and DCC access. The RS-232 port provides a serial ASCII interface for local craft access using VT100 emulation so that Transaction Language 1 (TL1) commands may be directly entered over a Telnet session without the assistance of a browser.

    The front panel of the Cisco TCC3 card provides multicolored LEDs for a quick view of the status of the card activity, raised network alarms, shelf voltage input, LAN interface, and synchronization. Two front-panel buttons allow users to quiet an active external audible alarm (alarm-cutoff button) or test the working state of system LEDs. The Cisco TCC3 card is supported beginning with the Cisco ONS 15454 MSPP Release 9.2.0 system software for both the SONET and SDH platforms. Deployed networks may consist of nodes equipped with either Cisco Timing, Communications, and Control Plus (TCC+), TCC2, TCC2P, or TCC3 processor cards. Nodes operating with previous versions of TCC processor cards can be upgraded, in service, to the new Cisco TCC3, allowing migration to post-Release 4.0 software loads and possible future features. A Cisco TCC3 will appear like a TCC2P in releases prior to 9.2 and later than 4.x. In releases 4.x and prior, the card appears as a TCC2.

    Features and Benefits

    The Cisco ONS 15454 TCC3 card provides the following feature set:

    84 section DCC (SDCC) and multiplex section DCC (MSDCC) terminations allow the interconnection of multiring and linear systems on a single shelf assembly, reducing networking costs.

    84 SDCC tunnels or SDCC-to-line DCC (LDCC) tunnels provide interface flexibility for transparent transport of third-party DCC overhead channels.

    Integrated system input-voltage monitoring facilitates proactive identification of DC power-system issues.

    Time-and-date clock recovery after brownout or power loss prevents clock reprogramming.

    Complete shelf lamp test through faceplate pushbutton simplifies LED maintenance testing.

    Local and remote craft user access allows technicians to access nodes from anywhere.

    Local audible alarm cutoff squelches office audible or visual alert systems.

    Enhanced security capabilities through provisionable Ethernet ports allow better control over system- and network-level access.


    Feature Availability

    Table 1 outlines the feature availability supported on the Cisco ONS 15454 TCC3.

    Table 1. Feature Availability

    Feature

    Platform Support

    Supported Card

    Availability

    DCC terminations

    SONET/ANSI and
    SDH/ETSI

    TCC3

    Release 4.0: 32 DCCs

    Release 4.6: 68 DCCs

    Rings per shelf (maximum)

    SONET/ANSI and
    SDH/ETSI

    TCC3

    Release 4.0: 1x 4F-BLSR/MS-SPR; 2x 2F-BLSR/MS-SPR;
    16x UPSR/SNCP

    Release 4.6: 1x 4F-BLSR/MS-SPR; 5x 2F-BLSR/MS-SPR;
    34x UPSR/SNCP

    Secure-mode supporting 2 MAC and 2 IP addresses

    SONET/ANSI and
    SDH/ETSI

    TCC3

    Release 5.0

    Summary

    The Cisco ONS 15454 MSPP equipped with TCC3 card performs like the TCC2P card:

    Multiservice capabilities: The Cisco ONS 15454 provides support for TDM-based, private-line interfaces (DS-1/E1, DS-3/E3, and OC-3/STM-1 through OC-192/STM-64) along with advanced 10/100/1000-Mbps Ethernet and future storage area network (SAN) interfaces, thus simplifying a service provider’s migration to new revenue opportunities and an enterprise’s multiple technology transport needs.

    Integrated, flexible optical networking: Optical transport speeds from OC-3/STM-1 to multiwavelength
    OC-192/STM-64 are supported to allow the proper level of bandwidth to be deployed for the user application. Supporting in-service bandwidth upgrades and an integrated span upgrade wizard, the Cisco ONS 15454 allows the user to keep pace with growing network demands.

    Flexible architecture: The Cisco ONS 15454 supports ring, linear point-to-point, linear add/drop multiplexer (ADM), and mesh networking topologies to employ many technologies, including 2- and 4-fiber bidirectional line switched ring (BLSR) and multiplex section subnetwork protection ring (MS-SPR) with protection channel access, unidirectional path switched ring (UPSR) and subnetwork connection protection (SNCP), linear automatic protection switching (APS) and subnetwork connection (SNC), and Path Protected Mesh Networking (PPMN SONET only). Networks can be built using a combination of architectures and protection technologies to meet the needs of the defined services to be transported or delivered.

    Comprehensive and efficient network management: A full complement of TDM, SONET, and Ethernet statistics are provided to allow for the proper operation maintenance of the network. Additionally, network management is simplified through a common Data Communications Network (DCN) connection and user access to TDM, Ethernet, and optical operations, administration, maintenance, and provisioning (OAM&P) functions.

    Competitive initial and long-term costs: Advanced capabilities are only practical when a system is affordable enough to deploy and deliver a return on the investment. The Cisco ONS 15454 was designed for ease of use, therefore speeding installation time, decreasing personnel training requirements, and simplifying equipment maintenance. An integrated browser-based, point-and-click, craft user interface allows even an untrained user to quickly set up and provision services across an entire network using helpful networkwide provisioning wizards.


    Product Specifications

    Table 2 and Table 3 outline the specifications for the Cisco ONS 15454 TCC3 card.

    Table 2. Product Specifications – Approvals and Compliance

    Countries

    SONET platform

    Canada

    European Union

    Hong Kong

    Japan

    Korea

    Mexico

    United States

    SDH platform

    Australia

    China

    European Union

    Hong Kong

    Korea

    Mexico

    New Zealand

    Singapore

    Electromagnetic compliance (EMC) – Class A

    ETSI 300-386-TC Telcordia Technologies Network Equipment Building Standards (NEBS) GR-1089-CORE, Issue 3 (Level 3, Type 2 and Type 4)

    CISPR 22, CISPR 24

    IC ICES-003 Issue 3, 1997

    FCC 47CFR15

    EN55022, EN55024

    Product safety

    Telcordia Technologies NEBS GR-1089-CORE, Issue 3 Level IEC 60950-1/EN 60950-1, 1st Edition UL and cUL/CSA 60950-1 1st Edition (Level 3, Type 2 and Type 4)

    Environmental

    Telcordia Technologies NEBS GR-63-CORE, Level 3

    ETS 300 019-2-1 (Storage, Class 1.1)

    ETS 300 019-2-2 (Class 2.3)

    ETS 300 019-2-3 (Class 3.1E)

    Customer requirements

    AT&T Network Equipment Design Specification (NEDS)

    SBC (TP76200MP)

    Verizon TCG Checklist

    MCI/Worldcom ESD

    Table 3. Product Specifications

    Attribute

    Value

    TCC3 Value

    Hardware components

    Processor speed

    400 MHz

    Nonvolatile memory (Flash)

    2 GB

    Volatile memory (synchronous dynamic RAM)

    1 GB

    Timing

    Internal clock

    Stratum 3

    SONET inputs

    1.544-Mbps T1 framed/unframed

    SONET outputs

    2 x 1.544-Mbps T1 framed/unframed

    SDH inputs

    2.048-Mbps E1

    2.048-MHz composite

    SDH outputs

    2.048-Mbps E1

    2.048-MHz composite

    Japan SONET inputs

    64-kHz + 8-kHz composite (hardware-ready)

    Japan SONET outputs

    6.312-MHz composite (hardware-ready)

    Physical card interfaces

    LAN

    RJ-45, 10BASE-T Ethernet

    Craft

    DB-9, RS-232 serial, DTE

    TL1

    9.6 K baud

    Management

    Card LEDs

    Failure (FAIL)

    Status (ACT/STBY)

    Red

    Green/yellow

    System LEDs

    Critical (CRIT)

    Major (MAJ)

    Minor (MIN)

    Remote (REM)

    Synchronization (SYNC)

    Alarm cutoff (ACO)

    Power A (PWR-A)

    Power B (PWR-B)

    Red

    Red

    Yellow

    Red

    Green

    Green

    Green/amber/red

    Green/amber/red

    Port LEDs

    LAN link (LINK)

    LAN activity (ACT)

    Green

    Amber (flash)

    Section/multiplex section overhead

    SDCC/MSDCC terminations

    84

    SDCC/MSDCC tunnels

    84

    Input voltage monitoring (per input)

    –48 VDC nominal systems

    Less than –40.5 VDC

    –40.5 to –56.7 VDC

    Greater than –56.7 VDC

    –60 VDC nominal systems

    Less than –50.0 VDC

    –50.0 to –72.0 VDC

    Greater than –72.0 VDC

    GR-499-CORE and ETS 300 132-2

    Major alarm, red LED

    Normal, green LED

    Major alarm, red LED

    ETS 300 132-2 Annex A

    Major alarm, red LED

    Normal, green LED

    Major alarm, red LED

    Power

    Nominal

    19.2W

    21.8W

    Maximum

    26W

    26W

    Physical

    Size (H x W x D)

    Single card slot 12.65 x 0.72 x 9.00 in. (32.13 x 1.83 x 22.86 cm)

    Weight

    2.05 lb/0.93 kg

    Operating environment

    Temperature

    –40 to 149°F (–40 to 65°C)

    Humidity

    5 to 95%, noncondensing

    Storage environment

    Temperature

    –40 to 185°F (40 to 85°C)

    Humidity

    5 to 95%, noncondensing

    System Requirements

    Table 4 outlines the system requirements for deploying the Cisco ONS 15454 TCC3 card.

    Table 4. System Requirements

    Component

    Cisco ONS 15454 SONET

    Cisco ONS 15454 SDH

    Shelf assembly

    15454-SA-NEBS 15454-SA-NEBS3E

    15454-SA-ANSI

    15454-SA-HD

    15454E-SA-ETSI version

    Processor1

    1+1

    1+1

    Cross-connect

    XC

    XC-VT

    XC-10G

    XC-VXC-10G

    XC-10G

    XC-VXL-10G

    XC-VXL-2.5G

    XC-VXC-10G

    System software

    Release 4.0.0 or later 2

    Release 4.0.0 or later 2

    Shelf slot compatibility

    7 and 11

    7 and 11

    1. The TCC2P and TCC3 cards can be deployed within the same shelf, but the features supported will be those of the TCC2P card.

    2. Functions of the TCC3 card are equivalent to the TCC2 card when operated with system software releases prior to 5.0.

    Ordering Information

    Table 5 lists the ordering information for the Cisco ONS 15454 TCC3 card. To place an order, visit the Cisco Ordering Home Page.

    To place an order, visit the Cisco Ordering Home Page. To download software, visit the Cisco Software Center.

    Table 5. Ordering Information

    Product Description

    Part Number

    Timing, Communications, and Control card, SONET platform, Version Three, industrial temperature

    15454-TCC3-K9

    Timing, Communications, and Control card, SDH platform, Version Three, industrial temperature

    15454E-TCC3-K9

    Cisco Services

    Cisco Services make networks, applications, and the people who use them work better together.

    Today, the network is a strategic platform in a world that demands better integration between people, information, and ideas. The network works better when services, together with products, create solutions aligned with business needs and opportunities.

    The unique Cisco Lifecycle approach to services defines the requisite activities at each phase of the network lifecycle to help ensure service excellence. With a collaborative delivery methodology that joins the forces of Cisco, our skilled network of partners, and our customers, we achieve the best results.

    For More Information

    For more information about the Cisco ONS 15454 MSTP, visit http://cisco.com/en/US/products/hw/optical/ps2006/index.html or contact your local account representative.

    Additional Information

    SKU 15454-TCC3-K9-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/optical-networking/ons-15454-series-multiservice-provisioning-platforms/datasheet_c78-598518.html
    Condition Refresh
    Module Type Optical Networking Module

    15454-TCC3-K9-RF

    AED

    AED 0

    0