Details
Product Overview
Figure 1. Cisco ONS 15454 TCC2 Card

Features and Benefits
• 84 section DCC (SDCC) and multiplex section DCC (MSDCC) terminations1 allow the interconnection of multiring and linear systems on a
• single shelf assembly, reducing networking costs.
• 84 SDCC tunnels or SDCC-to-line DCC (LDCC) tunnels provide interface flexibility for transparent transport of third-party DCC overhead channels.
• Integrated system input-voltage monitoring facilitates proactive identification of DC power-system issues.
• Time-and-date clock recovery after brownout or power loss prevents clock reprogramming.
• Complete shelf lamp test through faceplate pushbutton simplifies technician LED maintenance testing.
• Local and remote craft user access allows technicians to access nodes from anywhere.
• Local audible alarm cutoff squelches office audible or visual alert systems.
• Enhanced security capabilities through provisionable Ethernet ports allow better control over system- and network-level access.
• HW readiness for for 64-kHz+8-kHz composite timing inputs and 6-MHz composite timing support.
Feature Availability
Table 1. Feature Availability
Feature |
Platform Support |
Supported Card |
Availability |
DCC terminations |
SONET/ANSI and SDH/ETSI |
TCC2 or TCC2P |
Release 4.0: 32 DCCs Release 4.6: 68 DCCs |
Rings per shelf (maximums) |
SONET/ANSI and SDH/ETSI |
TCC2 or TCC2P |
Release 4.0: 1x 4F-BLSR/MS-SPR; 2x 2F-BLSR/MS-SPR; 16x UPSR/SNCP Release 4.6: 1x 4F-BLSR/MS-SPR; 5x 2F-BLSR/MS-SPR; 34x UPSR/SNCP |
Secure-mode supporting 2 MAC and 2 IP addresses |
SONET/ANSI and SDH/ETSI |
TCC2P |
Release 5.0 |
64-kHz + 8-kHz timing input |
SONET/ANSI |
TCC2P |
HW ready |
8-MHz timing output |
SONET/ANSI |
TCC2P |
HW ready |
Summary
• Multiservice capabilities - The Cisco ONS 15454 provides support for TDM-based, private-line interfaces (DS-1/E1, DS-3/E3, and OC-3/STM-1 through OC-192/STM-64) along with advanced 10/100/1000-Mbps Ethernet and future storage area network (SAN) interfaces, thus simplifying a service provider's migration to new revenue opportunities and an enterprise's multiple technology transport needs.
• Integrated, flexible optical networking - Optical transport speeds from OC-3/STM-1 to multiwavelength OC-192/STM-64 are supported to allow the proper level of bandwidth to be deployed for the user application. Supporting in-service bandwidth upgrades and an integrated span upgrade wizard, the Cisco ONS 15454 allows the user to keep pace with growing network demands.
• Flexible architecture - The Cisco ONS 15454 supports ring, linear point-to-point, linear add/drop multiplexer (ADM), and mesh networking topologies to employ many technologies, including 2- and 4-fiber bidirectional line switched ring (BLSR) and multiplex section subnetwork protection ring (MS-SPR) with protection channel access, unidirectional path switched ring (UPSR) and subnetwork connection protection (SNCP), linear automatic protection switching (APS) and subnetwork connection (SNC), and Path Protected Mesh Networking (PPMN SONET only). Networks can be built using a combination of architectures and protection technologies to meet the needs of the defined services to be transported or delivered.
• Comprehensive and efficient network management - A full complement of TDM, SONET, and Ethernet statistics are provided to allow for the proper operation maintenance of the network. Additionally, network management is simplified through a common Data Communications Network (DCN) connection and user access to TDM, Ethernet and optical operations, administration, maintenance, and provisioning functions.
• Competitive first- and long-term costs - Advanced capabilities are only practical when a system is affordable enough to deploy and deliver a return on the investment. The Cisco ONS 15454 was designed for ease of use, therefore speeding installation time, decreasing personnel training requirements, and simplifying equipment maintenance. An integrated browser-based, point-and-click, craft user interface allows even an untrained user to quickly set up and provision services across an entire network using helpful networkwide provisioning wizards.
Product Specifications
Table 2. Product Specifications
Countries |
|
SONET platform |
Canada European Union Hong Kong Japan Korea Mexico United States |
SDH platform |
Australia China European Union Hong Kong Korea Mexico New Zealand Singapore |
Electromagnetic compliance (EMC) - Class A |
ETSI 300-386-TC Telcordia Technologies Network Equipment Building Standards (NEBS) GR-1089-CORE, Issue 3 (Level 3, Type 2 and Type 4) CISPR 22, CISPR 24 IC ICES-003 Issue 3, 1997 FCC 47CFR15 EN55022, EN55024 |
Product safety |
Telcordia Technologies NEBS GR-1089-CORE, Issue 3 Level IEC 60950-1/EN 60950-1, 1st Edition UL and cUL/CSA 60950-1 1st Edition (Level 3, Type 2 and Type 4) |
Environmental |
Telcordia Technologies NEBS GR-63-CORE, Level 3 ETS 300 019-2-1 (Storage, Class 1.1) ETS 300 019-2-2 (Class 2.3) ETS 300 019-2-3 (Class 3.1E) |
Customer requirements |
AT&T Network Equipment Design Specification (NEDS) SBC (TP76200MP) Verizon TCG Checklist MCI/Worldcom ESD |
Table 3. Product Specifications
Attribute |
TCC2 Value |
TCC2P Value |
|
Hardware components |
|||
Processor speed |
400 MHz |
||
Nonvolatile memory (Flash) |
256 MB |
||
Volatile memory (synchronous dynamic RAM) |
256 MB |
||
Timing |
|||
Internal clock |
Stratum 3 |
||
SONET inputs |
1.544-Mbps T1 framed/unframed |
||
SONET outputs |
2 x 1.544-Mbps T1 framed/unframed |
||
SDH inputs |
2.048-Mbps E1 2.048-MHz composite |
||
SDH outputs |
2.048-Mbps E1 2.048-MHz composite |
||
Japan SONET inputs |
- |
64-kHz + 8-kHz composite (HW ready) |
|
Japan SONET outputs |
- |
6.312-MHz composite (HW ready) |
|
Physical card interfaces |
|||
LAN1 |
RJ-45, 10BASE-T Ethernet |
||
Craft |
DB-9, RS-232 serial, DTE |
||
TL1 |
9.6 K baud |
||
Management |
|||
Card LEDs |
|||
Failure (FAIL) |
Red |
||
Status (ACT/STBY) |
Green/yellow |
||
System LEDs |
|||
Critical (CRIT) |
Red |
||
Major (MAJ) |
Red |
||
Minor (MIN) |
Yellow |
||
Remote (REM) |
Red |
||
Synchronization (SYNC) |
Green |
||
Alarm cutoff (ACO) |
Green |
||
Power A (PWR-A) |
Green/amber/red |
||
Power B (PWR-B) |
Green/amber/red |
||
Port LEDs |
|||
LAN link (LINK) |
Green |
||
LAN activity (ACT) |
Amber (flash) |
||
Section/multiplex section overhead |
|||
SDCC/MSDCC terminations |
84 |
||
SDCC/MSDCC tunnels |
84 |
||
Input voltage monitoring (per input)2 |
|||
-48 VDC nominal systems Less than -40.5 VDC -40.5 to -56.7 VDC Greater than -56.7 VDC -60 VDC nominal systems Less than -50.0 VDC -50.0 to -72.0 Greater than -72.0 VDC |
GR-499-CORE and ETS 300 132-2 Major alarm, red LED Normal, green LED Major alarm, red LED ETS 300 132-2 Annex A Major alarm, red LED Normal, green LED Major alarm, red LED |
||
Power |
|||
Nominal |
19.2W |
21.8W |
|
Maximum |
26W |
26W |
|
Physical |
|||
Size (H x W x D) |
Single card slot 12.65 x 0.72 x 9.00 in. (32.13 x 1.83 x 22.86 cm) |
||
Weight |
2.05 lb/0.93 kg |
||
Operating environment |
|||
Temperature |
-40 to 149°F (-40 to 65°C) |
||
Humidity |
5 to 95%, noncondensing |
||
Storage environment |
|||
Temperature |
-40 to 185°F (40 to 85°C) |
||
Humidity |
5 to 95%, noncondensing |
System Requirements
Table 4. System Requirements
Component |
Cisco ONS 15454 SONET |
Cisco ONS 15454 SDH |
Shelf assembly |
15454-SA-NEBS 15454-SA-NEBS3E 15454-SA-ANSI 15454-SA-HD |
15454E-SA-ETSI version |
Processor1 |
1+1 |
1+1 |
Cross-connect |
XC XC-VT XC-10G XC-VXC-10G |
XC-10G XC-VXL-10G XC-VXL-2.5G XC-VXC-10G |
System software |
Release 4.0.0 or later 2 |
Release 4.0.0 or later 2 |
Shelf slot compatibility |
7 and 11 |
7 and 11 |
1. Versions TCC2 and TCC2P cards can be deployed within the same shelf, but the features supported will be that of the TCC2 card.
2. Functions of TCC2P card are equivalent to TCC2 card when operated with system software releases prior to 5.0.
Ordering Information
Table 5. Ordering Information
Product Description |
Part Number |
Timing, Communications, and Control rated, SONET platform Card, Version 2 Plus, enhanced security, industrial temperature |
15454-TCC2P-K9 |
Timing, Communications, and Control rated, SDH platform Card, Version 2 Plus, enhanced security, industrial temperature |
15454E-TCC2P-K9 |
Timing, Communications, and Control Card, Version 2, industrial temperature rated, SONET platform |
15454-TCC2 |
Timing, Communications, and Control Card, Version 2, industrial temperature rated, SDH platform |
15454E-TCC2 |
Additional Information
SKU | 15454E-TCC2P-K9-RF |
---|---|
Weight (Kg) | 1 |
Datasheet URL | http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/ons-15454-timing-communications-control-2-plus-tcc2p-card/product_data_sheet0900aecd80351fd6.html |
Condition | Refresh |
Module Type | Optical Networking Module |