1OC768-POS-SR-RF

Double click on above image to view full picture

Zoom Out
Zoom In

1OC768-POS-SR-RF

Description:

Cisco Refurbished
Original Part No : 1OC768-POS-SR=

CRS-1 1xOC768/STM256 POS Interface Module/SR REMANUFACTURED
AED 677,044

Availability: In stock


Available Quantity: 10

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco ® CRS-1 Carrier Routing System is the industry's first carrier router offering continuous system operation, unprecedented service flexibility, and system longevity. The Cisco CRS-1 is powered by Cisco IOS ® XR Software - a unique self-healing, distributed operating system designed for always-on operation while scaling system capacity up to 92 Tbps. The innovative system architecture combines the Cisco Silicon Packet Processor, the first programmable 40-Gbps application-specific integrated circuit (ASIC), with the Cisco Service Separation Architecture for unprecedented service flexibility and speed to service. The Cisco CRS-1 marks a new era in carrier IP Communications by powering the foundation for network and service convergence today while protecting investments for decades to come.
    This data sheet provides detailed product specifications for the Cisco CRS-1 1-Port OC-768c/STM-256c POS Interface Module. For more information about the Cisco CRS-1 or about other interfaces available for the Cisco CRS-1, visit:http://www.cisco.com/go/crs

    Product Specifications

    Table 1. Product Specifications

     

     

    Feature

    Description

    Chassis Compatibility

    Compatible with all current Cisco CRS-1 and CRS-3 line-card chassis

    Software Compatibility

    Cisco IOS® XR Software Release 3.0 or higher for CRS-1

    Cisco IOS XR Software Release 4.0.0 or later for CRS-3

    Protocols

    • Packet over Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH)
    • RFC 1619/2615, Point-to-Point Protocol (PPP) over SONET/SDH
    • RFC 1662, PPP in High-Level Data Link Control (HDLC)-like framing
    • RFC 2615, PPP over SONET/SDH
    • HDLC

    Port Density

    • One 1-port OC-768c/STM-256c POS interface per physical layer interface module (PLIM)

    Layer1/Layer 2 Feature Summary

    • Supports a maximum transmission unit (MTU) of up to 9188 bytes
    • Layer 2 encapsulations: HDLC, PPP; no subinterface support
    • Error counts for B1, B2, B3
    • Threshold-crossing alerts (TCAs), far end block error path (FEBE) for B1, B2, and B3 with threshold that can be set
    • Loss of signal (LOS), loss of frame (LOF), line alarm indicator signal (LAIS), path alarm indicator signal (PAIS), loss of pointer (LOP), line remote defect indicator (LRDI), path remote defect indicator (PRDI), signal failure (SF), signal degrade (SD), line remote error indicator (line FEBE), and path remote error indicator (path FEBE)
    • Performance monitoring - Error counts for B1, B2, B3, TCAs, and FEBE for B1, B2, or B3 with threshold that can be set
    • Local (internal) or loop-timed (recovered from network)
    • Stratum 3 clock accuracy over full operating temperature
    • Pointer activity monitoring
    • Local (diagnostic) and line (network) loopback
    • 1 + X^43 self-synchronous scrambler
    • Power and input current monitoring

    Reliability and Availability

    Online insertion and removal (OIR) without affecting system traffic

    Network Management

    • Cisco IOS XR Software command-line interface (CLI)
    • Simple Network Management Protocol (SNMP)
    • Extensible Markup Language (XML) interface
    • CraftWorks Interface (CWI)

    Physical Dimensions

    • Occupies one PLIM slot
    • Weight: 8.6 lbs (3.9 kg)
    • Height: 20.6 in. (52.32 cm)
    • Depth: 11.2 in. (28.4 cm)
    • Width: 1.8 in. (4.57 cm)

    Power

    150W

    Environmental Conditions

    • Storage Temperature: -40°C to 70°C (-40°F to 158°F)
    • Operating Temperature:
    • Normal: 5°C to 40°C (41°F to 104°F)
    • Short term: -5°C to 50°C (23°F to 122°F) short term
    • Relative Humidity:
    • Normal: 5% to 85%
    • Short-term: 5% to 90% but not to exceed 0.024 kg water/kg of dry air

    Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but, no more than 15 occurrences during that 1 year period.)

     

    Approvals and Compliance

    Table 2. Compliance and Agency Approvals

     

     

    Feature

    Description

    Safety Standards

    • UL/CSA/IEC/EN 60950-1
    • IEC/EN 60825 Laser Safety
    • ACA TS001
    • AS/NZS 60950
    • FDA - Code of Federal Regulations Laser Safety

    EMI

    • FCC Class A
    • ICES 003 Class A
    • AS/NZS 3548 Class A
    • CISPR 22 (EN55022) Class A
    • VCCI Class A
    • BSMI Class A
    • IEC/EN 61000-3-2: Power Line Harmonics
    • IEC/EN 61000-3-3: Voltage Fluctuations and Flicker

    Immunity (Basic Standards)

    • IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
    • IEC/EN-61000-4-3: Radiated Immunity (10V/m)
    • IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
    • IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
    • IEC/EN-61000-4-5: Signal Ports (1kV)
    • IEC/EN-61000-4-5: Surge DC Port (1kV)
    • IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
    • IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
    • IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

    ETSI and EN

    • EN300 386: Telecommunications Network Equipment (EMC)
    • EN55022: Information Technology Equipment (Emissions)
    • EN55024: Information Technology Equipment (Immunity)
    • EN50082-1/EN-61000-6-1: Generic Immunity Standard

    Network Equipment Building Systems (NEBS)

    This product is designed to meet the following requirements (qualification in progress):

    • SR-3580: NEBS Criteria Levels (Level 3)
    • GR-1089-CORE: NEBS EMC and Safety
    • GR-63-CORE: NEBS Physical Protection

     

    Additional Specifications

    Table 3. Additional Specifications - Optics

     

     

    Parameter

    Short-Reach (1550-nm)

    Connector Type

    SC

    Target Distance

    2 km

    Transmitter

    Power Out (Maximum)

    3 dBm

    Power Out (Minimum)

    0 dBm

    Extinction Ratio (Minimum)

    8.2 dB

    Side Mode Suppression (Minimum)

    35 dB

    Modulation Type

    External

    Receiver

    P (RMax) (Minimum Overload)

    3 dBm

    P (RMin) (Minimum Sensitivity)

    -6 dBm

    Optical Link

    Fiber Type

    G.652 (single-mode fiber [SMF])

    Maximum Dispersion

    40 ps/nm

    Attenuation Range

    0-4 dB

    Optical Path Penalty

    2 dB

    Compliance

    G.693 VSR2000-3R2

    Miscellaneous

    Optical Power Monitoring

    ±2 dB accuracy

    Both Transmit and Receive Directions

    Laser Bias Current Monitoring

    Transmit direction only

    Temperature Monitoring

    Transmit direction only

     

     

    Ordering Information

    To place an order, visit: Cisco Ordering Home Page

    Table 4. Ordering Information

     

     

    Product Part Number

    Product Name

    1OC768-POS-SR (=)

    Cisco CRS-1 1-Port OC-768/STM-256 POS/DPT Interface Module; SR

    Additional Information

    SKU 1OC768-POS-SR-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/crs-1-16-slot-single-shelf-system/product_data_sheet09186a008022d5f2.html
    Condition Refresh
    Module Type Performance Routing Engine

    1OC768-POS-SR-RF

    AED

    AED 677,044

    0