4-10GE-ITU/C-RF

4-10GE-ITU/C-RF

Description:

Cisco Refurbished
Original Part No : 4-10GE-ITU/C=

CRS-1 4 port 10GE (C-band) DWDM PLIM REMANUFACTURED
AED 225,681

Availability: In stock


Available Quantity: 5

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® CRS-1 Carrier Routing System offers continuous system operation, exceptional service flexibility, and system longevity. The Cisco CRS-1 is powered by Cisco IOS® XR Software - a unique self-healing, distributed operating system designed for always-on operation while scaling system capacity up to 92 Tbps. The innovative system architecture combines the Cisco Silicon Packet Processor, the first programmable 40-Gbps application-specific integrated circuit (ASIC), with the Cisco Service Separation Architecture for superior service flexibility and speed to service. The Cisco CRS-1 marks a new era in carrier IP Communications by powering the foundation for network and service convergence today while protecting investments for decades to come.

    Product Overview

    This data sheet provides detailed product specifications for an important element of the Cisco IP-over-DWDM solution, the Cisco CRS-1 4-Port 10GE Tunable WDMPHY Interface Module (Figure 1). This tunable DWDM interface module allows service providers to increase efficiencies, improve reliability, and reduce operational and capital costs through elimination of expensive and bulky optical transponder equipment, even as video-based applications rapidly increase traffic in their DWDM networks. The module supports both G.709 Generic Forward Error Correction (GFEC) and high-gain Enhanced Forward Error Correction (EFEC), extending reach up to 2000 kilometers (km) without requiring signal regeneration. The Cisco CRS-1 4-Port 10GE Interface Module is also completely tunable across the C band with 50-GHz spacing, and supports router-to-router SONET/SDH-like operations, administration, maintenance, and provisioning (OAM&P). For more information about the Cisco CRS-1 or about other interfaces available for the Cisco CRS-1, visit http://www.cisco.com/go/crs.

    Figure 1. Cisco CRS-1 4-Port 10GE Tunable WDMPHY Interface Module

    Product Specifications

    Table 1 gives specifications of the Cisco CRS-1 4-Port 10GE Tunable WDMPHY Interface Module.

    Table 1. Product Specifications

     

     

    Feature

    Description

    Chassis Compatibility

    Compatible with all current Cisco CRS-1 and CRS-3 line-card chassis

    Software Compatibility

    Cisco IOS XR Software Release 3.3 or later for CRS-1

    Cisco IOS XR Software Release 4.0.0 or later for CRS-3

    Ethernet

    • Encapsulations: ARPA, IEEE 802.2/SAP, IEEE 802.3/SNAP
    • IEEE 802.x flow control
    • 802.1q VLAN support, jumbo frames
    • IEEE 802.1p tagging
    • Source/destination MAC accounting and VLAN accounting
    • IEEE 802.3ae LANPHY (10GBASE-R) PCS

    Port Density

    • Four ports of 10GE WDMPHY interfaces per physical layer interface module (PLIM)
    • Duplex LC optical connector per port

    OTN (G.709) Features

    • OTN Disabled: no OTN (G.709) framing, line rate of 10.3125 Gbps
    • OTN Enabled: OTN (G.709) framing, line rate of 11.0975 Gbps
    • Mapping of IEEE 802.3ae 10GBASE-R signal into an overclocked OTU2 running at 11.0975 Gbps
    • Alarm reporting: Loss of Signal (LOF), Loss of OTN Frame (LOF), Loss of OTN Multiframe (LOM), OTU alarm indication signal (OTU-AIS), OTU backward defect indication (OTU-BDI), ODU alarm indication signal (ODU-AIS), ODU open connection indication (ODU-OCI), ODU locked (ODU-LCK), ODU backwards defect indication (ODU-BDI), ODU payload type identifier mismatch (ODU-PTIM), OTU signal fail (OTU_SF_BER), and OTU signal degrade (OTU_SD_BER)
    • OTU_SF_BER and OTU_SD_BER alarms are based on monitoring OTU BIP errors with a user-configurable threshold crossing
    • Error counts: OTU BIP, OTU BEI, ODU BIP, and ODU BEI
    • Threshold crossing alerts (TCAs) for OTU BIP errors (SM-TCA) and ODU BIP errors (PM-TCA) with user-configurable threshold
    • Local (internal) and line (network) loopback
    • Local (internal) or loop (recovered from network) timing
    • ±100ppm local clock accuracy over operating temperature

    FEC Features

    • FEC Type: G.975.1 I.7
    • NO FEC: no Forward Error Correction
    • GFEC: standard G.975 Reed-Salomon algorithm
    • EFEC: standard G.975.1 two orthogonally concatenated BCH super FEC code. This FEC scheme contains three parameterizations of the same scheme of two orthogonally interleaved block codes (BCH). The constructed code is decoded iteratively, to achieve the expected performance. FEC statistics for pre-FEC BER, corrected errors (EC), and uncorrected words (UC)
    • FEC statistics for pre-FEC BER, corrected errors (EC), and uncorrected words (UC)

    Optical Features

    • Line rate 10.3125 Gbps ±100 ppm or 11.0957 Gbps ±100 ppm
    • Duplex LC (shuttered) faceplate optical connector
    • Full C-band tunable laser with 50 GHz spacing
    • Tx and Rx optical power monitoring
    • Optical power monitoring accuracy ±2 dB

    Reliability and Availability

    Online insertion and removal (OIR) without affecting system traffic

    Network Management

    • Cisco IOS XR Software command-line interface (CLI)
    • Simple Network Management Protocol (SNMP)
    • Extensible Markup Language (XML) interface
    • CraftWorks Interface (CWI)

    Physical Dimensions

    • Occupies one PLIM slot
    • Weight: 8.6 lb (3.9 kg)
    • Height: 20.6 in. (52.32 cm)
    • Depth: 11.2 in. (28.4 cm)
    • Width: 1.8 in. (4.57 cm)

    Power

    150W

    Environmental Conditions

    • Storage temperature: -40 to 70°C (-40 to 158°F)
    • Operating temperature:
    • Normal: 5 to 40°C (41 to 104°F)
    • Short-term: -5 to 50°C (23 to 122°F) short term
    • Relative humidity:
    • Normal: 5 to 85%
    • Short-term: 5 to 90% but not to exceed 0.024 kg water/kg of dry air

    Short-term refers to a period of not more than 96 consecutive hours and a total of 360 hours but not more than 15 instances in 1 year.

     

    Approvals and Compliance

    Table 2 gives standards compliance information about the Cisco CRS-1 4-Port 10GE Tunable WDMPHY Interface Module, and Table 3 lists optical specifications.

    Table 2. Compliance and Agency Approvals

     

     

    Feature

    Description

    Safety Standards

    • UL/CSA/IEC/EN 60950-1
    • IEC/EN 60825 Laser Safety
    • ACA TS001
    • AS/NZS 60950
    • FDA - Code of Federal Regulations Laser Safety

    EMI

    • FCC Class A
    • ICES 003 Class A
    • AS/NZS 3548 Class A
    • CISPR 22 (EN55022) Class A
    • VCCI Class A
    • BSMI Class A
    • IEC/EN 61000-3-2: Power Line Harmonics
    • IEC/EN 61000-3-3: Voltage Fluctuations and Flicker

    Immunity (Basic Standards)

    • IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
    • IEC/EN-61000-4-3: Radiated Immunity (10V/m)
    • IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
    • IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)
    • IEC/EN-61000-4-5: Signal Ports (1 kV)
    • IEC/EN-61000-4-5: Surge DC Port (1 kV)
    • IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10 Vrms)
    • IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
    • IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

    ETSI and EN

    • EN300 386: Telecommunications Network Equipment (EMC)
    • EN55022: Information Technology Equipment (Emissions)
    • EN55024: Information Technology Equipment (Immunity)
    • EN50082-1/EN-61000-6-1: Generic Immunity Standard

    Network Equipment Building Standards (NEBS)

    This product is designed to meet the following requirements (qualification in progress):

    • SR-3580: NEBS Criteria Levels (Level 3)
    • GR-1089-CORE: NEBS EMC and Safety
    • GR-63-CORE: NEBS Physical Protection

     

    Additional Specifications

    Table 3. Optical Specifications

     

     

    Specification

    DWDM Line Interface

    DWDM Line Interface

    Bit rate

    10.3125 ±100 ppm

    11.0957 ±100 ppm

    Nominal wavelengths (lambdaTnom)

    C-band 50GHz unit: full tunable from 1529.55 to 1561.84

    Spectral width at 20dB (lambda delta20)

    ≤25 GHz

    Optical Transmitter

    Type

    Lithium niobate external modulator

    Output power (PTmin to PTmax)

    +3 dBm, +6 dBm

    Required optical return loss, minimum (ORLmin)

    27 dB

    Extinction ratio, minimum (reminx)

    >10.5 dB

    Laser safety class

    1

    Optical Receiver

    Type

    Avalanche photo diode (APD)

    Chromatic dispersion tolerance (DLRmax)

    Up to ±1200 ps/nm (2 dB penalty)

    • Minimum BER (BERmin)
    • FEC off
    • FEC on
    • E-FEC on

    10E-12

    10E-15

    10E-15

    • Reflectance between far-end Tx and near-end Rx (maximum)

    -27 dB

    • Receiver reflectance (maximum)

    -14 dB

    • Input wavelength bandwidth (lambdac_rx)

    1290 nm to 1605 nm

    Connector type (Tx/Rx)

    LC, duplex (shuttered)

    Maximum Input Power

    -8 dBm

     

    Physical Loopback TX-to-RX port requires 15dB attenuator

     

     

    Optical Performance

    OSNR

    FEC Type

    Pre-FEC BER

    Post-FEC BER

    Input Power Sensitivity

    CD Tolerance

    23 dB

    OFF

    <10E(-12)

    -

    -8 to -20dBm C-band

    ±1200ps/nm

    19 dB

    OFF

    <10E(-12)

    -

    -8 to -20dBm C-band

    ±1000ps/nm

    19 dB

    OFF

    <10E(-12)

    -

    -8 to -22dBm C-band

    -

    10 dB

    GFEC

    <10E(-5)

    <10E(-15)

    -8 to -18dBm

    ±800ps/nm

    8.5 dB

    GFEC

    <10E(-5)

    <10E(-15)

    -8 to -18dBm

    -

    19 dB

    EFEC

    <7x10E(-4)

    <10E(-15)

    -8 to -26dBm

    ±800ps/nm

    19 dB

    EFEC

    <7x10E(-4)

    <10E(-15)

    -8 to -27dBm

    -

    7 dB

    EFEC

    <7x10E(-4)

    <10E(-15)

    -8 to -20dBm

    ±800ps/nm

    5 dB

    EFEC

    <7x10E(-4)

    <10E(-15)

    -8 to -20dBm

    -

     

    Ordering Information

    To place an order, contact your local Cisco representative or visit the Cisco Ordering Home Page. Use the ordering information in Table 4.

    Table 4. Ordering Information

     

     

    Product Part Number

    Product Name

    4-10GE-ITU/C

    Cisco CRS-1 4-Port 10 Gigabit Ethernet (C-band) DWDM PLIM

    Additional Information

    SKU 4-10GE-ITU/C-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/crs-1-8-slot-single-shelf-system/product_data_sheet0900aecd80395b82.html
    Condition Refresh
    Module Type Gigabit Ethernet Module

    4-10GE-ITU/C-RF

    AED

    AED 225,681

    0