Double click on above image to view full picture

Zoom Out
Zoom In



Cisco Refurbished
Original Part No : 4-10GE=

Cisco CRS-1 Series 4X10GE Interface Module REMANUFACTURED
AED 42,315

Availability: In stock

Available Quantity: 17

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® CRS-1 Carrier Routing System is the industry's first carrier router offering continuous system operation, unprecedented service flexibility, and system longevity. The Cisco CRS-1 is powered by Cisco IOS® XR Software-a unique self-healing, distributed operating system. As part of a video-enabled IP Next-Generation Network (NGN), the Cisco CRS-1 Series delivers continuous, always-on operation that easily scales to support the massive bandwidth requirements of visual networking experiences such as high-definition IPTV and Cisco TelePresence. These services demand a platform that delivers predictable forwarding performance and efficient, intelligent fabric-based multicast replication. The Cisco CRS-1 Series enables the Internet and NGNs to handle the approaching zettabyte era of carrier IP communications while protecting network investments for decades to come.

    Product Overview

    The Cisco CRS-1 Series 4-Port 10 Gigabit Ethernet Interface Module (Figure 1) provides four line-rate, IEEE 802.3-compliant 10 Gigabit Ethernet interfaces. Physical connections can be made using modular XENPAK pluggable optics. DWDM wavelengths are supported with the proper XENPAK, enabling the Cisco CRS Series router to be directly connected into an optical filter module, such as the Cisco ONS 15454 reconfigurable optical add-drop multiplexer (ROADM). This allows service providers to increase efficiencies, improve reliability, and reduce operational and capital costs through elimination of expensive and bulky optical transponder equipment, even as video-based applications rapidly increase traffic in their DWDM networks.

    Figure 1. Cisco CRS-1 Series 4-Port 10 Gigabit Ethernet Interface Module

    Features and Benefits

    • Four line-rate 10 Gigabit Ethernet full duplex interfaces

    • Per-port flexibility for optical reach - selected using the appropriate XENPAK pluggable optical modules

    • Compatible with all Cisco CRS Series chassis

    • Supports in-use insertion and removal without the need to power down the chassis

    • Simple configuration, monitoring, and maintenance

    Product Specifications

    Table 1. Product Specifications





    Chassis Compatibility

    Compatible with all Cisco CRS-1 and CRS-3 chassis

    Requires one of the following forwarding engines (for CRS-1 chassis): CRS-FP40 (on CRS-4/S and CRS-8/S only), CRS-MSC-40G-B (on CRS-4/S, CRS-8/S, CRS-16/S, and CRS Multi-chassis)

    Requires one of the following forwarding engines (for CRS-3 chassis): CRS-FP140 or CRS-MSC-140G

    Software Compatibility

    Cisco IOS XR Software Release 3.8.1 or later for CRS-1

    Cisco IOS XR Software Release 4.0.0 or later for CRS-3

    Port Density

    Four ports of 10 Gigabit Ethernet per card


    Encapsulations: ARPA, IEEE 802.2/SAP, IEEE 802.3/SNAP

    IEEE 802.x flow control

    802.1q VLAN support, jumbo frames

    IEEE 802.1p tagging

    Source/destination MAC accounting and VLAN accounting

    Reliability and Availability

    Online insertion and removal (OIR) without affecting system traffic

    Field-replaceable XENPAK optical modules

    Network Management

    Cisco IOS XR Software command-line interface (CLI)

    Simple Network Management Protocol (SNMP)

    Extensible Markup Language (XML) interface

    Physical Dimensions

    Occupies one PLIM slot

    Weight: 8.3 lb (3.8 kg)

    Height: 20.6 in. (52.2 cm)

    Depth: 11.2 in. (28.4 cm)

    Width: 1.8 in. (4.49 cm)



    Environmental Conditions

    Storage temperature: -40 to 70°C (-40 to 158°F)

    Operating temperature:

    Normal: 5 to 40°C (41 to 104°F)

    Short-term: -5 to 50°C (23 to 122°F)

    Relative Humidity:

    Normal: 5% to 85%

    Short-term: 5% to 90% but not to exceed 0.024 kg water/kg of dry air

    Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.)


    Approvals and Compliance

    Table 2. Compliance and Agency Approvals





    Safety Standards

    UL/CSA/IEC/EN 60950-1

    IEC/EN 60825 Laser Safety

    ACA TS001

    AS/NZS 60950

    FDA - Code of Federal Regulations Laser Safety


    FCC Class A

    ICES 003 Class A

    AS/NZS 3548 Class A

    CISPR 22 (EN55022) Class A

    VCCI Class A

    BSMI Class A

    IEC/EN 61000-3-2: Power Line Harmonics

    IEC/EN 61000-3-3: Voltage Fluctuations and Flicker

    Immunity (Basic Standards)

    IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8 kV Contact, 15 kV Air)

    IEC/EN-61000-4-3: Radiated Immunity (10 V/m)

    IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2 kV Power, 1 kV Signal)

    IEC/EN-61000-4-5: Surge AC Port (4 kV CM, 2 kV DM)

    IEC/EN-61000-4-5: Signal Ports (1 kV)

    IEC/EN-61000-4-5: Surge DC Port (1 kV)

    IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10 Vrms)

    IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30 A/m)

    IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

    ETSI and EN

    EN300 386: Telecommunications Network Equipment (EMC)

    EN55022: Information Technology Equipment (Emissions)

    EN55024: Information Technology Equipment (Immunity)

    EN50082-1/EN-61000-6-1: Generic Immunity Standard

    Network Equipment Building Systems (NEBS)

    This product is designed to meet the following requirements (qualification in progress):

    SR-3580: NEBS Criteria Levels (Level 3)

    GR-1089-CORE: NEBS EMC and Safety

    GR-63-CORE: NEBS Physical Protection


    Additional Specifications

    Table 3. Additional Specifications




    DWDM 1530.33-1560.61 nm

    Long Reach 1310 nm (LR+)

    Extended Reach 1550 nm (ER+)

    Connector Type




    Target Distance

    80 km

    10 km

    40 km



    Power out (maximum)

    3 dBm

    0.5 dBm

    4 dBm

    Power out (minimum)

    -1.0 dBm

    -8.2 dBm

    -4.7 dBm



    P (RMax) (overload)

    -7.0 dBm

    0.5 dBm

    -1.0 dBm

    P (RMin) (sensitivity)

    -24.0 dBm

    -14.4 dBm

    -15.8 dBm

    Optical Link


    Fiber type

    G.652 (SMF)

    G.652 (single-mode fiber [SMF])

    G.652 (SMF)

    Optical path penalty

    3.0 dB

    3.2 dB

    4.1 dB


    IEEE 802.3ae 10GBASE

    IEEE 802.3ae 10GBASE-LR

    IEEE 802.3ae 10GBASE-ER


    Ordering Information

    To place an order, visit: Cisco Ordering Home Page.

    Table 4. Ordering Information



    Product Part Number

    Product Name


    Cisco CRS-1 Series 4x10GE Interface Card


    XENPAK 10GBASE-LR+ Optics Module


    XENPAK 10GBASE-ER+ Optics Module

    DWDM-XENPAK-60.61= to DWDM-XENPAK-30.33=

    XENPAK 10GBASE DWDM Modules (32 ITU 100-GHz wavelengths)


    Additional Information

    SKU 4-10GE-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/carrier-routing-system/data_sheet_c78-553670.html
    Condition Refresh
    Module Type Gigabit Ethernet Module



    AED 42,315