4-40GE-L/OTN-RF

Double click on above image to view full picture

Zoom Out
Zoom In

4-40GE-L/OTN-RF

Description:

Cisco Refurbished
Original Part No : 4-40GE-L/OTN=

CiscoCRS Series4x40GE LAN/OTN InterfaceModule REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 150000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Product Overview

    This data sheet provides detailed product specifications for an important element of the Cisco® Ethernet Optimized solutions: the Cisco CRS 4-Port 40GE LAN/OTN Interface Module (Figure 1). The module connects directly into any 40 Gigabit Ethernet transport network, including traditional OC-768 transport networks, and provides four ports at 40 Gbps of data per port for 40 Gigabit Ethernet LAN physical layer (LAN-PHY) or Optical Transport Network (OTN) Transport Unit Level 3 (OTU-3) transport.

    Figure 1. Cisco CRS 4-Port 40GE LAN/OTN Interface Module

    Challenge and Solution

    Significant dense Packet over SONET (POS) deployments exist despite the overwhelming industry trend toward Ethernet. Operators are looking for POS-like operations, administration, and maintenance (OAM) functions at Ethernet price points with technologies such as OTN G.709 encapsulation. Some operators have traditional transponder systems that can operate only in OC-768 and OTU-3 modes.

    In addition, bandwidth growth is leading all markets, including data center operators, to move to 40 Gigabit Ethernet in the aggregation layer to handle growth in the data center.

    The Cisco CRS 4-Port 40GE LAN/OTN Interface Module addresses both these needs.

    The 4-port 40GE module in OTN mode with multirate serial C Form-Factor Pluggable (CFP) Fiber with Scrambled Encoding (FR) optics addresses the requirements for POS such as OAM functions at Ethernet prices, and the 4-port 40GE module in LAN mode with CFP Long-Reach (LR) or CFP Short-Reach (SR) optics provides a dense 40 Gigabit Ethernet solution for data centers and 10 Gigabit Ethernet aggregation.

    Product Specifications

    Table 1 lists specifications for the Cisco CRS 4-Port 40GE LAN/OTN Interface Module.

    Table 1. Product Specifications

    Feature

    Description

    Chassis compatibility

    Compatible with all current Cisco CRS-1 and CRS-3 line-card chassis

    Software compatibility

    Cisco IOS® XR Software Release 4.2.3 or later for Cisco CRS-3 platform

    Protocols

    40 Gigabit Ethernet
    OTU-3
    Encapsulations: ARPA, IEEE 802.2/SAP, and IEEE 802.3/SNAP
    IEEE 802.x flow control
    IEEE 802.1q VLAN support and jumbo frames
    IEEE 802.1p tagging
    Source and destination MAC address accounting and VLAN accounting

    Port density

    Four ports of 40 Gigabit Ethernet per physical-layer interface module (PLIM) slot

    POS feature summary

    Not applicable

    OTN (G.709) feature summary

    ITU G.709
    Alarm reporting: Loss of signal (LOF), loss of OTN frame (LOF), and loss of OTN multiframe (LOM)
    OTU alarm indication signal (OTU-AIS), OTU backward defect indication (OTU-BDI), ODU alarm indication signal (ODU-AIS), ODU open connection indication (ODU-OCI), ODU locked (ODU-LCK), ODU backwards defect indication (ODU-BDI), ODU payload type identifier mismatch (ODU-PTIM), OTU signal fail (OTU_SF_BER), and OTU signal degrade (OTU_SD_BER)
    OTU_SF_BER and OTU_SD_BER alarms are based on monitoring of OTU BIP errors with a user-configurable threshold crossing
    Error counts: OTU BIP, OTU BEI, ODU BIP, and ODU BEI
    Threshold crossing alerts (TCAs) for OTU BIP errors (SM-TCA) and ODU BIP errors (PM-TCA) with user-configurable threshold
    Local (internal) and line (network) loopback

    Reliability and availability

    Online insertion and removal (OIR) without affecting system traffic

    Network management

    Cisco IOS XR Software command-line interface (CLI)
    Simple Network Management Protocol (SNMP)
    XML interface
    CraftWorks Interface (CWI)

    Physical dimensions

    Occupies one PLIM slot
    Weight: 11.8 lb (5.3 kg)
    Height: 20.6 in. (52.32 cm)
    Depth: 11.2 in. (28.4 cm)
    Width: 1.8 in. (4.57 cm)

    Power

    185W

    Environmental conditions

    Storage temperature: (–40 to 158°F (–40 to 70°C)
    Operating temperature:
    Normal: 32 to 104°F (0 to 40°C)
    Short-term: 23 to 131°F (–5 to 55°C)
    Relative humidity:
    Normal: 5 to 85%
    Short-term: 5 to 90% but not to exceed 0.024 kg water/kg of dry air
    Note: Short-term refers to a period of not more than 96 consecutive hours and a total of 360 hours, but not more than 15 instances in 1 year.


    Approvals and Compliance

    Table 2 provides standards compliance information, Table 3 provides additional specifications, and Table 4 provides performance monitoring parameters.

    Table 2. Compliance and Agency Approvals

    Feature

    Description

    Safety standards

    UL/CSA/IEC/EN 60950-1
    IEC/EN 60825 Laser Safety
    ACA TS001
    AS/NZS 60950
    FDA–Code of Federal Regulations Laser Safety

    EMI

    FCC Class A
    ICES 003 Class A
    AS/NZS 3548 Class A
    CISPR 22 (EN55022) Class A
    VCCI Class A
    BSMI Class A
    IEC/EN 61000-3-2: Power Line Harmonics
    IEC/EN 61000-3-3: Voltage Fluctuations and Flicker

    Immunity (basic standards)

    IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
    IEC/EN-61000-4-3: Radiated Immunity (10V/m)
    IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
    IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)
    IEC/EN-61000-4-5: Signal Ports (1 kV)
    IEC/EN-61000-4-5: Surge DC Port (1 kV)
    IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10 Vrms)
    IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
    IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

    ETSI and EN

    EN300 386: Telecommunications Network Equipment (EMC)
    EN55022: Information Technology Equipment (Emissions)
    EN55024: Information Technology Equipment (Immunity)
    EN50082-1/EN-61000-6-1: Generic Immunity Standard

    Network Equipment Building Standards (NEBS)

    This product is designed to meet the following requirements (qualification in progress):

    SR-3580: NEBS Criteria Levels (Level 3)
    GR-1089-CORE: NEBS EMC and Safety
    GR-63-CORE: NEBS Physical Protection

    All specifications in Table 3 are worst-case values for the operational life of the product.

    Table 3. Additional Specifications:

    40 Gigabit Ethernet CFP Optics

    Specifications

    CFP-40G-SR4

    Supports link lengths of up to 100m and 150m over laser-optimized OM3 and OM4 multimode fibercables, respectively

    CFP-40G-LR4

    Supports link lengths of up to 10 km over a standard pair of G.652 single-mode fiber with duplexSCconnectors

    CFP-40G-FR

    Supports link lengths of up to 2 km over a standard pair of single-mode fiber with duplex SCconnectors


    Performance Monitoring Parameters

    Area

    Parameter Name

    Description

    OTN

    OTUk SM

    ODUk PM

    Frame structures

    BBE-SM

    BBE-PM

    Number of background block errors

    BBER-SM

    BBER-PM

    Background block error ratio

    ES-SM

    ES-PM

    Number of errored seconds

    ESR-SM

    ESR-PM

    Errored seconds ratio

    SES-SM

    SES-PM

    Number of severely errored seconds

    SESR-SM

    SESR-PM

    Severely errored seconds ratio

    UAS-SM

    UAS-PM

    Number of unavailable seconds

    FC-SM

    FC-PM

    Number of failure counts

    FEC

    Bit errors

    Number of corrected bit errors

    Uncorrectable words

    Number of uncorrectable words

    Ordering Information

    To place an order, contact your local Cisco representative or visit the Cisco Ordering homepage at www.cisco.com. Use the ordering information in Table 5.

    Table 4. Ordering Information

    Part Number

    Product Name

    4-40GE-L/OTN

    Cisco CRS 4-Port 40 Gigabit Ethernet LAN/OTN Interface Module

    CFP-40G-LR4

    Cisco multirate 40GBASE-LR4 and OTU3 C4S1-2D1 for SMF, 1310-nm window, SC duplex connector

    CFP-40G-SR4

    Cisco 40GBASE-SR4 CFP transceiver module for MMF, 4-lanes, 850-nm wavelength, 12-fiber MPO/MTP connector

    CFP-40G-FR

    Cisco 40GBASE-FR transceiver module in a CFP form factor that supports 2km reach on a single mode fiber

    Service and Support

    Cisco delivers innovative services programs through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco Services helps you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, contact your local Cisco representative or visit www.cisco.com.

    For More Information

    For more information about the Cisco CRS 4-Port 40GE LAN/OTN Interface Module, contact your local Cisco representative or visit www.cisco.com/go/crs.

    Additional Information

    SKU 4-40GE-L/OTN-RF
    Weight (Kg) 5
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/carrier-routing-system/data_sheet_c78-717299.html
    Condition Refresh
    Module Type Interface Module

    4-40GE-L/OTN-RF

    AED

    AED 0

    0