76-ES+T-20G-RF

Double click on above image to view full picture

Zoom Out
Zoom In

76-ES+T-20G-RF

Description:

Cisco Refurbished
Original Part No : 76-ES+T-20G=

ES+ Low Queue 20 port GE - 3CXL REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 48000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco ® 7600 Series Ethernet Services Plus Transport Line Cards are designed for cost-efficient Carrier Ethernet service delivery. The cards allow service prioritization for voice, video, data, and wireless mobility services and can connect to LAN, WAN, and OTN PHY interfaces. Service providers and enterprises benefit from the efficiency gains in power consumption, improved economics from higher density, and service scalability and feature capability optimized for cost-sensitive transport Ethernet solutions.
    The Ethernet Services (ES) Plus Transport cards utilize the ES Plus card family architecture that relies on programmable interface processors, protecting network investments and reducing total cost of ownership. The extensible design maximizes connectivity options and offers superior service intelligence through programmable interface processors operating at line rate. This data sheet contains the specifications for the Cisco 7600 Series ES Plus Transport Line Cards as shown in Figures 1 and 2.

    Figure 1. Cisco 7600 Series ES Plus Transport Line Cards: 4-Port 10 GE and 2-Port 10 GE

     

    Figure 2. Cisco 7600 Series ES Plus Transport Line Cards: 20-Port GE and 40-Port GE

     

    Product Overview

    Designed for delivering flexible transport Ethernet services in IP/MPLS provider edge networks, as well as WAN/MAN and optical transport network (OTN) applications, the Cisco 7600 Series Ethernet Services Plus Transport Line Cards support port densities of 40 Gbps or 20 Gbps in 10 Gigabit Ethernet and Gigabit Ethernet port varieties. The cards feature hierarchical quality of service (QoS) supporting 16 queues per physical port, locally significant VLANs, and up to 16,000 VLAN IDs per line card for rich services at scale. The cards provide the unique ability to combine both Layer 2 and Layer 3 services on the same line card. The combination of native Ethernet Layer 2 switching, bridging, Virtual Private LAN Services (VPLS), Ethernet over MPLS (EoMPLS), and Layer 3 IP/MPLS routing distinguishes this line card among other products on the market, particularly in Carrier Ethernet applications.
    Additionally, the line cards have integrated G.709 Generic Forward Error Correction (available with the purchase of the 76-ES+OTN/G.709 License) to span regional distances with integration directly into OTN devices such as the Cisco ONS 15454 Multiservice Transport Platform (MSTP) or core routers such as the Cisco CRS-1 Carrier Routing System. The ability to span even greater distances between Cisco 7600 Series Routers is supported with Enhanced Forward Error Correction (EFEC) in the ES Plus Transport cards (back-to-back ES Plus Transport or ES Plus Extended Transport connections). Operations, administration, and maintenance (OA&M) capabilities are supported in both OTN and WAN PHY interface controller modes, providing insight into link quality and data transmission health.
    The innovative architecture of these industry-leading, premium Ethernet services line cards is designed to deliver cost-effective high-touch features, combining both ASIC and network processor technology for optimal performance and flexibility. The Cisco 7600 Series ES Plus Transport Line Cards provide distributed forwarding with proven ASIC technology in the forwarding path (routing, switching, NetFlow, ACLs) and queuing and shaping functions to optimize the performance of these foundational features. Additionally, four (for the ES Plus Transport 40G line cards) or two (for the ES Plus Transport 20G line cards) programmable network processors are included in the forwarding plane to facilitate flexibility and feature growth. This ideal technology combination provides customers with the necessary flexibility for future service deployments and allows them to scale the system capacity as required.

    Key Features and Benefits

    Table 1. Key Features and Benefits of the Cisco 7600 Series ES Plus Transport Line Cards

     

     

    Feature

    ES Plus Line Card

    Benefit

    Line card form factor

    20-port GE

    40-port GE

    2-port 10GE

    4-port 10GE

    Offers economical, high-density, high-performance, premium Carrier Ethernet services with excellent scalability

    Performance

    Line rate with services enabled

    Provides line-rate forwarding performance on GE and 10 GE interfaces with services enabled

    Packet memory

    512 MB

    Up to 100 ms combined bidirectional buffering

    Switch fabric connectivity

    Two (2), 20-Gbps Fabric Channels

    Utilizes the Cisco 7600 Series 720-Gbps switch fabric for data forwarding; 2 fabric channels are utilized that are not present in slots 1 through 8 on the Cisco 7613 chassis

    Online Insertion and Removal (OIR)

    Supports OIR of the line cards

    Provides hitless OIR to minimize impact of add/change/remove operations

     

    Product Specifications

    Table 2. Product Specifications

     

     

    Description

    Specification

    Chassis compatibility

    All Cisco 7600 Series Router chassis, except the Cisco 7603, which has reached end of life and end of sale. The Cisco 7603-S is fully supported.

    Central forwarding engine compatibility

    Cisco Supervisor Engine 720-3B, 720-3BXL, Route Switch Processor 720 (RSP720) 3C/3CXL, and RSP720-10GE 3C/3CXL

    The ES Plus line cards require dual-channel switch fabric connectivity; therefore the cards are not supported with the Supervisor Engine 32 or in slots 1 thru 8 of the Cisco 7613 chassis.

    Distributed forwarding card (DFC)

    Line-rate distributed forwarding with services enabled, up to ~48

    Cisco Distributed Forwarding Card 3CXL (DFC-3CXL)

    Optimized for IP/MPLS PE offering multiple IP services such as Layer 3 VPNs, IPv6, and triple- or quad-play services

    Up to 1 million hardware-based forwarding entries with DFC-3CXL

    Up to 256,000 NetFlow entries with DFC-3CXL

    Minimum software

    Cisco IOS® Software Release 12.2SRD4 and SRE1 or later

    Packet memory

    512 MB for 200 ms of combined input and output buffering at 10 Gbps

    Link encapsulations

    Ethernet II and IEEE 802.1q encapsulations

    Hardware queues

    Cisco 7600 Series ES Plus Transport 40G and 20G Line Cards

    Supporting up to 16 level 4 queues per physical port

    Hierarchical QoS (H-QoS)

    MAC addresses

    Up to 96,000 MAC addresses per ES Plus Transport line card

    16,000 VLAN IDs per line card (within Flexible QinQ configuration guidelines)

    Hardware-based MAC learning at wire rate

    Environmental conditions

    Operating temperature: 32 to 104°F (0 to 40°C)

    Storage temperature: -40 to 167°F (-40 to 75°C)

    Relative humidity: 10 to 90 percent, non-condensing

    Operating altitude: -60 to 2000m

    MIBs

    Cisco Optical Transport Network MIB (CISCO-OTN-MIB)

    Cisco Entity MIB (CISCO-ENTITY-MIB)

    Cisco Entity Asset MIB

    Cisco Entity Field-Replaceable Unit (FRU) Control MIB

    Cisco Entity Alarm MIB

    Interface IF MIB (RFC 2233)

    Definitions of Managed Objects for Bridges (RFC 1493)

    Evolution of Interfaces Group of MIB-II (RFC 1573)

    SNMP MIB II (RFC 1213)

    Remote Monitoring (RMON) MIB (RFC 1757)

    Switch Monitoring (SMON) MIB

    Details on the MIBs above can be found at this link:http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/7600mibs/

    Network management

    CiscoWorks, CiscoView, and CiscoWorks Resource Manager Essentials (RME); Cisco ANA to be supported in the future

    Physical specifications

    Occupies 1 slot in a Cisco 7600 Series Router

    Up to 8 ES Plus line cards (any type) in a Cisco 7609 or 7609-S 9-slot chassis

    Requires Cisco Supervisor Engine 720-3B or 3BXL, or Route Switch Processor 720 or later

    Dimensions (H x W x D): 1.75 x 15.375 x 16 in.

    Weight:

    • 76-ES+T-2TG: 11.5 lbs
    • 76-ES+T-4TG: 12.4 lbs
    • 76-ES+T-20G: 11.7 lb
    • 76-ES+T-40G: 12.9 lb

    Maximum power consumption (watts)

    76-ES+T-20G: 305W

    76-ES+T-40G: 419W

    76-ES+T-2TG: 301W

    76-ES+T-4TG: 406W

    Indicators

    Status: green (operational); orange (faulty)

    Regulatory compliance

    CE Marking

    Safety

    UL 60950

    CSA C22.2 No. 60950

    EN60950

    TS001

    IEC 60950

    AS/NZS3260

    ITU-T G.664 (Automatic Laser Shutdown - ALS)

    Electromagnetic compatibility

    FCC Part 15 Class A

    ICES-003 Class A

    VCCI Class A

    EN55022 Class A

    CISPR22 Class A

    AS/NZS3548 Class A

    EN61000-3-2

    EN61000-3-3

    EN55024

    EN61000-6-1

    EN50082-1

    EN300 386

    Telecommunications standards

    ITU-T G.664 (ALS)

    ITU-T G.691

    ITU-T G.707

    ITU-T G.709 (OTN)

    ITU-T G.783 Sections 9-10

    ITU-T G.784

    ITU-T G.803

    ITU-T G.813

    ITU-T G.825

    ITU-T G.826

    ITU-T G.841

    ITU-T G.957 Table 3

    ITU-T G.958FCC Part 15 Class A

    ITU-T G.975.I.4 (EFEC)

    Network clock references

    GR-253-CORE (SONET)

    GR-1244-CORE (BITS)

    G.8261 (No SSM)

    G.8262

    G.8264 (No ESMC)

     

    Table 3. Feature Support

     

     

    Description

    Specification

    Carrier Ethernet and IP/MPLS network protocols

    IPv4 Unicast and Multicast

    IPv6 Unicast and Multicast

    Multiprotocol Label Switching (MPLS) Provider Edge (PE) Layer 2 and Layer 3 VPNs

    Multiprotocol Label Switching Traffic Engineering (MPLS-TE)

    MPLS Fast Reroute (FRR)

    Diff-Serv aware MPLS TE

    GRE and IP-in-IP Tunneling

    Ethernet Bridging and Ethernet Multipoint Bridging (E-MPB)

    Ethernet switching

    Ethernet over MPLS (EoMPLS)

    Switch port - access and trunk

    QinQ Termination

    Selective QinQ

    Flexible QinQ

    VLAN Translation

    Private VLAN

    VPLS and H-VPLS

    VLAN and Spanning Tree Protocols

    Per VLAN Spanning Tree (PVST)

    Virtual Switch Tagging (VST)

    Rapid Spanning Tree Protocol (RSTP)

    Multiple Spanning Tree (MST) Protocol - IEEE 802.1s

    VACL and VTP

    802.1ah

    QoS

    Modular QoS CLI (MQC)

    Policing granularity down to ingress, egress, physical interfaces, and VLAN

    Access control lists

    Classification, marking, policing, and queuing

    Diff-Serv Code Point (DSCP)

    Complex re-marking of Ethernet and IP/MPLS headers

    Congestion avoidance

    Weighted Random Early Detection (WRED) based on IP Prec, DSCP, MPLS EXP

    Queuing and shaping

    Enhanced Class-Based Weighted Fair Queuing (CBWFQ)

    Egress low-latency queuing (LLQ); traffic inside LLQ may be shaped

    Two levels of queuing hierarchy

    Egress shaping

    Traffic classification and bandwidth policing

    Classification based on:

    Extended ACL

    IP Precedence/IP DSCP

    MPLS Experimental Bits (EXP)

    VLAN

    Input VLAN

    Policer: Ingress single- and dual-rate, three color

    ACLs and security

    Up to 32,000 access list entries with no forwarding degradation

    Hardware counters for ACL hits

    Layer 2 and Layer 3 VPNs

    Layer 2 VPNs

    EoMPLS with MAC learning

    H-VPLS (MPLS edge or IEEE 802.1ad edge)

    Flexible QinQ

    Layer 3 VPNs

    MPLS VPN (RFC 2547-bis)

    Inter-AS and Carrier-Supporting-Carrier

    Multicast VPN

    802.1ah

    Protection and Bundling

    MPLS Fast Reroute

    IEEE 802.3ad and EtherChannel®

     

    Table 4. Feature Scale

     

     

    Feature

    ES Plus Transport Card with 20 GE Ports
    ES Plus Transport Card with 2 10GE Ports

    ES Plus Transport Card with 40 GE Ports
    ES Plus Transport Card with 4 10GE Ports

    Layer 3 Routed Interface

    2048

    4096

    Dot1q/QinQ subinterface

    2048

    4096

    EVC (all types)

    4096

    8192

    L2TPv3 (tunnel, sessions)

    (256, 4096)

    (512, 8192)

    Layer 3 Access Interface

    4096

    8192

    MTP EVC

    4096

    8192

    H-QoS (Level 4 Queues, Level 3 Shaper, Level 2 Shaper)

    (16, 8, 4) per port

    (16, 8, 4) per port

    Policers

    24000

    48000

     

    Table 5. OTN Feature Support (10 Gigabit Ethernet ports only)

     

     

    Description

    Specification

    Protocol Support

    OTN G.709 compliant, selectable

    Mapping of IEEE 802.3ae 10GBASE-R signal into an overclocked

    OPU1e running at 11.0491 Gbps

    OPU2e running at 11.0975 Gbps

    Internal (System) and Line (network) loopback

    Local (internal) or loop (recovered from network) timing

    ±100 ppm local clock accuracy over operating temperature

    Alarms and Performance Monitoring

    Alarm reporting:

    • Loss of signal (LOS)
    • Loss of OTN frame (LOF)
    • Loss of OTN multiframe (LOM)
    • OTU alarm indication signal (OTU-AIS)
    • OTU backward defect indication (OTU-BDI)
    • ODU alarm indication signal (ODU-AIS)
    • ODU open connection indication (ODU-OCI)
    • ODU locked (ODU-LCK)
    • ODU backward defect indication (ODU-BDI)
    • ODU payload type identifier mismatch (ODU-PTIM)
    • OTU incoming alignment (OTU-IAE)

    OTU_SF_BER and OTU_SD_BER alarms are based on monitoring OTU BIP errors with a user-settable threshold crossing.

    Error counts: OTU BIP, OTU BEI, ODU BIP, and ODU BEI.

    Threshold crossing alerts (TCAs) for OTU BIP errors (SM-TCA) and ODU BIP errors (PM-TCA) with user-settable threshold.

    FEC Features

    No FEC: ability to turn off error correction for use with non-FEC supporting interfaces.

    GFEC: standard G.709

    EFEC: standard G.975.I.4

    FEC statistics for corrected errors (EC), last second corrected errors(EC), and uncorrected words (UC).

     

    Table 6. DWDM Line Interface Specification (10 Gigabit Ethernet Ports only)

     

     

    Description

    Specification

    Bit rate

    9.953280 Gbps +/- 4.6 ppm

    10.3125 Gbps +/- 4.6 ppm

    11.049 Gbps +/- 4.6 ppm

    11.0957 Gbps +/- 4.6 ppm

    Spectral width at 20 dB (lambda delta20)

    ≤ 30  GHz

    Optical Transmitter

    Type

    Lithium niobate external modulator

    Output power (PTmin to PTmax)

     -1 dBm, +3 dBm

    Required optical return loss, minimum (ORLmin)

    27 dB

    Extinction ratio, minimum (reminx)

    > 9 dB

    Laser safety class

    1

    Optical Receiver

    Type

    Avalanche photo diode (APD)

    Chromatic dispersion tolerance (DLRmax)

    Up to 1600 ps/nm

    Minimum BER (BERmin)

    FEC off

    FEC on

    E-FEC on


    10E-12

    10E-15

    10E-15

    Reflectance between far-end Tx and near-end Rx (maximum)

    -27 dB

    Input wavelength bandwidth (lambdac_rx)

    1260 nm to 1607  nm

    Connector type (Tx/Rx)

    LC, duplex

     

    Table 7. Optical Performance (10 Gigabit Ethernet ports only)

     

     

    DWDM XFP Fixed Wavelength

    Long wavelength performance (1570 nm to 1607 nm) applicable at 9.9, 10.3 only

    Pin @ 23dB OSNR, BER<10-12

     

    -7 to -22

    dBm

    Long wavelength performance (1529nm to 1562nm C-band)

    No FEC applications (Note b) applicable at 9.9 Gbps, 10.3 Gbps only

    Pin @ 23dB OSNR, BER<10-12

     

    -7 to -23

    dBm

    Pin @ 23dB OSNR, BER<10-12

    -500 to +1600 ps/nm

    -7 to -20

    dBm

    No FEC applications applicable at 9.9 Gbps, 10.3 Gbps only

    Pin @ 17dB OSNR, BER<10-12

     

    -7 to -18

    dBm

    Pin @ 20dB OSNR, BER<10-12

    -500 to +1600 ps/nm

    -7 to -18

    dBm

    FEC applications (Note c) applicable at 11.09 Gbps only

    Pin @ 11 dB OSNR, BER<10-5

     

    -7 to -18

    dBm

    Pin @ 12 dB OSNR, BER<10-5

    -500 to +1100 ps/nm

    -7 to -18

    dBm

    Enhanced-FEC applications (Note c) applicable at 11.09 Gbps only

    Pin @ 23dB OSNR, BER<7*10-4

     

    -7 to -27

    dBm

    Pin @ 23dB OSNR, BER<7*10-4

    -500 to +1300 ps/nm

    -7 to -24

    dBm

    Enhanced-FEC applications (Note c) applicable at 11.09Gbps only

    Pin @ 8 dB OSNR, BER<7*10-4

     

    -7 to -18

    dBm

    Pin @ 9dB OSNR, BER<7*10-4

    -500 to +1100 ps/nm

    -7 to -18

    dBm

     

    Table 8. SONET/SDH WAN PHY Feature Support (10 Gigabit Ethernet ports only)

     

     

    SONET/SDH Features and Functions

    Ethernet WAN Interface

    Comments

    Synchronization

    Supported

    Ethernet WAN interface cannot be used in SONET/SDH rings

    Section, Line, and Path BIP8

    Supported

    Errors are detected and counted

    Section trace

    Supported

     

    Pointer operation/action

    Supported

    H1, H2 are used to get the location of SPE

    Defects or anomalies: LOS, SEF, LOF, S-BIP, L-BIP, AIS-L, RDI-L, AIS-P, LOP-P, P-BIP, PLM-P

    Supported

    Counters for section, line, and path BIP errors

     

    Table 9. Cisco ES Plus Line Card XFP and SFP Modules Supported

     

     

    Part Number for ES Plus Line Cards 10-Gbps Small Form-Factor Pluggable (XFP)

    Wavelength

    Mode

    Distance

    XFP-10GZR-OC192LR, LAN-PHY

    1550 nm

    Single mode (SM)

    49.7 miles (80 km)

    XFP-10GER-OC192IR+, LAN-PHY

    1550 nm

    SM

    24.8 miles (40 km)

    XFP-10GLR-OC192SR, LAN-PHY

    1310 nm

    SM

    6.2 miles (10 km)

    SFP-GE-S

    850 nm

    Multimode (MM)

    1804 ft (550m)

    SFP-GE-L

    1310 nm

    SM

    6.2 miles (10 km)

    SFP-GE-Z

    1550 nm

    SM

    43.5 miles (70 km)

    SFP-GE-T

    -

    -

    328 ft (100m)

     

    Table 10. Ordering Information for Cisco ES Plus Line Cards GE Gigabit Interface Converter (GLC) Modules

     

     

    Product Number

    Description

    GLC-BX-D

    1000BASE-BX10 SFP module for single-strand SMF, 1490-nm TX/1310-nm RX wavelength

    GLC-BX-U

    1000BASE-BX10 SFP module for single-strand SMF, 1310-nm TX/1490-nm RX wavelength

     

    Table 11. Ordering Information for Cisco ES Plus Line Cards 10 GE Dense Wavelength Division Multiplexing (DWDM) XFP Modules
    Note: The following DWDM XFP products are orderable as spares only.

     

     

    Product Number

    Description

    ITU Channel

    DWDM-XFP-60.61=

    10GBASE-DWDM 1560.61 nm XFP (100-GHz ITU grid)

    21

    DWDM-XFP-59.79=

    10GBASE-DWDM 1559.79 nm XFP (100-GHz ITU grid)

    22

    DWDM-XFP-58.98=

    10GBASE-DWDM 1558.98 nm XFP (100-GHz ITU grid)

    23

    DWDM-XFP-58.17=

    10GBASE-DWDM 1558.17 nm XFP (100-GHz ITU grid)

    24

    DWDM-XFP-56.55=

    10GBASE-DWDM 1556.55 nm XFP (100-GHz ITU grid)

    26

    DWDM-XFP-55.75=

    10GBASE-DWDM 1555.75 nm XFP (100-GHz ITU grid)

    27

    DWDM-XFP-54.94=

    10GBASE-DWDM 1554.94 nm XFP (100-GHz ITU grid)

    28

    DWDM-XFP-54.13=

    10GBASE-DWDM 1554.13 nm XFP (100-GHz ITU grid)

    29

    DWDM-XFP-52.52=

    10GBASE-DWDM 1552.52 nm XFP (100-GHz ITU grid)

    31

    DWDM-XFP-51.72=

    10GBASE-DWDM 1551.72 nm XFP (100-GHz ITU grid)

    32

    DWDM-XFP-50.92=

    10GBASE-DWDM 1550.92 nm XFP (100-GHz ITU grid)

    33

    DWDM-XFP-50.12=

    10GBASE-DWDM 1550.12 nm XFP (100-GHz ITU grid)

    34

    DWDM-XFP-48.51=

    10GBASE-DWDM 1548.51 nm XFP (100-GHz ITU grid)

    36

    DWDM-XFP-47.72=

    10GBASE-DWDM 1547.72 nm XFP (100-GHz ITU grid)

    37

    DWDM-XFP-46.92=

    10GBASE-DWDM 1546.92 nm XFP (100-GHz ITU grid)

    38

    DWDM-XFP-46.12=

    10GBASE-DWDM 1546.12 nm XFP (100-GHz ITU grid)

    39

    DWDM-XFP-44.53=

    10GBASE-DWDM 1544.53 nm XFP (100-GHz ITU grid)

    41

    DWDM-XFP-43.73=

    10GBASE-DWDM 1543.73 nm XFP (100-GHz ITU grid)

    42

    DWDM-XFP-42.94=

    10GBASE-DWDM 1542.94 nm XFP (100-GHz ITU grid)

    43

    DWDM-XFP-42.14=

    10GBASE-DWDM 1542.14 nm XFP (100-GHz ITU grid)

    44

    DWDM-XFP-40.56=

    10GBASE-DWDM 1540.56 nm XFP (100-GHz ITU grid)

    46

    DWDM-XFP-39.77=

    10GBASE-DWDM 1539.77 nm XFP (100-GHz ITU grid)

    47

    DWDM-XFP-38.98=

    10GBASE-DWDM 1538.98 nm XFP (100-GHz ITU grid)

    48

    DWDM-XFP-38.19=

    10GBASE-DWDM 1538.19 nm XFP (100-GHz ITU grid)

    49

    DWDM-XFP-36.61=

    10GBASE-DWDM 1536.61 nm XFP (100-GHz ITU grid)

    51

    DWDM-XFP-35.82=

    10GBASE-DWDM 1535.82 nm XFP (100-GHz ITU grid)

    52

    DWDM-XFP-35.04=

    10GBASE-DWDM 1535.04 nm XFP (100-GHz ITU grid)

    53

    DWDM-XFP-34.25=

    10GBASE-DWDM 1534.25 nm XFP (100-GHz ITU grid)

    54

    DWDM-XFP-32.68=

    10GBASE-DWDM 1532.68 nm XFP (100-GHz ITU grid)

    56

    DWDM-XFP-31.90=

    10GBASE-DWDM 1531.90 nm XFP (100-GHz ITU grid)

    57

    DWDM-XFP-31.12=

    10GBASE-DWDM 1531.12 nm XFP (100-GHz ITU grid)

    58

    DWDM-XFP-30.33=

    10GBASE-DWDM 1530.33 nm XFP (100-GHz ITU grid)

    59

     

    Table 12. Cisco ES Plus Line Cards GE DWDM SFP Modules
    Note: The following DWDM SFP products are orderable as spares only.

     

     

    Product Number

    Description

    ITU Channel

    DWDM-SFP-6141=

    1000BASE-DWDM 1561.42 nm SFP (100 GHz ITU grid)

    20

    DWDM-SFP-6061=

    1000BASE-DWDM 1560.61 nm SFP (100-GHz ITU grid)

    21

    DWDM-SFP-5979=

    1000BASE-DWDM 1559.79 nm SFP (100-GHz ITU grid)

    22

    DWDM-SFP-5898=

    1000BASE-DWDM 1558.98 nm SFP (100-GHz ITU grid)

    23

    DWDM-SFP-5817=

    1000BASE-DWDM 1558.17 nm SFP (100-GHz ITU grid)

    24

    DWDM-SFP-5736=

    1000BASE-DWDM 1557.36 nm SFP (100 GHz ITU grid)

    25

    DWDM-SFP-5655=

    1000BASE-DWDM 1556.55 nm SFP (100-GHz ITU grid)

    26

    DWDM-SFP-5575=

    1000BASE-DWDM 1555.75 nm SFP (100-GHz ITU grid)

    27

    DWDM-SFP-5494=

    1000BASE-DWDM 1554.94 nm SFP (100-GHz ITU grid)

    28

    DWDM-SFP-5413=

    1000BASE-DWDM 1554.13 nm SFP (100-GHz ITU grid)

    29

    DWDM-SFP-5332=

    1000BASE-DWDM 1553.33 nm SFP (100 GHz ITU grid)

    30

    DWDM-SFP-5252=

    1000BASE-DWDM 1552.52 nm SFP (100-GHz ITU grid)

    31

    DWDM-SFP-5172=

    1000BASE-DWDM 1551.72 nm SFP (100-GHz ITU grid)

    32

    DWDM-SFP-5092=

    1000BASE-DWDM 1550.92 nm SFP (100-GHz ITU grid)

    33

    DWDM-SFP-5012=

    1000BASE-DWDM 1550.12 nm SFP (100-GHz ITU grid)

    34

    DWDM-SFP-4931=

    1000BASE-DWDM 1549.32 nm SFP (100 GHz ITU grid)

    35

    DWDM-SFP-4851=

    1000BASE-DWDM 1548.51 nm SFP (100-GHz ITU grid)

    36

    DWDM-SFP-4772=

    1000BASE-DWDM 1547.72 nm SFP (100-GHz ITU grid)

    37

    DWDM-SFP-4692=

    1000BASE-DWDM 1546.92 nm SFP (100-GHz ITU grid)

    38

    DWDM-SFP-4612=

    1000BASE-DWDM 1546.12 nm SFP (100-GHz ITU grid)

    39

    DWDM-SFP-4532=

    1000BASE-DWDM 1545.32 nm SFP (100 GHz ITU grid)

    40

    DWDM-SFP-4453=

    1000BASE-DWDM 1544.53 nm SFP (100-GHz ITU grid)

    41

    DWDM-SFP-4373=

    1000BASE-DWDM 1543.73 nm SFP (100-GHz ITU grid)

    42

    DWDM-SFP-4294=

    1000BASE-DWDM 1542.94 nm SFP (100-GHz ITU grid)

    43

    DWDM-SFP-4214=

    1000BASE-DWDM 1542.14 nm SFP (100-GHz ITU grid)

    44

    DWDM-SFP-4134=

    1000BASE-DWDM 1541.35 nm SFP (100 GHz ITU grid)

    45

    DWDM-SFP-4056=

    1000BASE-DWDM 1540.56 nm SFP (100-GHz ITU grid)

    46

    DWDM-SFP-3977=

    1000BASE-DWDM 1539.77 nm SFP (100-GHz ITU grid)

    47

    DWDM-SFP-3898=

    1000BASE-DWDM 1538.98 nm SFP (100-GHz ITU grid)

    48

    DWDM-SFP-3819=

    1000BASE-DWDM 1538.19 nm SFP (100-GHz ITU grid)

    49

    DWDM-SFP-3739=

    1000BASE-DWDM 1537.40 nm SFP (100 GHz ITU grid)

    50

    DWDM-SFP-3661=

    1000BASE-DWDM 1536.61 nm SFP (100-GHz ITU grid)

    51

    DWDM-SFP-3582=

    1000BASE-DWDM 1535.82 nm SFP (100-GHz ITU grid)

    52

    DWDM-SFP-3504=

    1000BASE-DWDM 1535.04 nm SFP (100-GHz ITU grid)

    53

    DWDM-SFP-3425=

    1000BASE-DWDM 1534.25 nm SFP (100-GHz ITU grid)

    54

    DWDM-SFP-3346=

    1000BASE-DWDM 1533.47 nm SFP (100 GHz ITU grid)

    55

    DWDM-SFP-3268=

    1000BASE-DWDM 1532.68 nm SFP (100-GHz ITU grid)

    56

    DWDM-SFP-3190=

    1000BASE-DWDM 1531.90 nm SFP (100-GHz ITU grid)

    57

    DWDM-SFP-3112=

    1000BASE-DWDM 1531.12 nm SFP (100-GHz ITU grid)

    58

    DWDM-SFP-3033=

    1000BASE-DWDM 1530.33 nm SFP (100-GHz ITU grid)

    59

     

    Table 13. Cisco ES Plus Line Cards GE CWDM SFP Modules
    Note: The following CWDM SFP products are orderable as spares only.

     

     

    Product Number

    Description

    Color

    CWDM-SFP-1470=

    Cisco CWDM 1470-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fiber Channel

    Gray

    CWDM-SFP-1490=

    Cisco CWDM 1490-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fiber Channel

    Violet

    CWDM-SFP-1510=

    Cisco CWDM 1510-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fiber Channel

    Blue

    CWDM-SFP-1530=

    Cisco CWDM 1530-nm SFP; Gigabit Ethernet and 1 and 2-Gb Fiber Channel

    Green

    CWDM-SFP-1550=

    Cisco CWDM 1550-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fiber Channel

    Yellow

    CWDM-SFP-1570=

    Cisco CWDM 1570-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fiber Channel

    Orange

    CWDM-SFP-1590=

    Cisco CWDM 1590-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fiber Channel

    Red

    CWDM-SFP-1610=

    Cisco CWDM 1610-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fiber Channel

    Brown

     

    Licensing Information

    Cisco 7600 Series ES Plus Basic IP License

    The ES Plus line cards have two feature license options, with the following part numbers: 76-ES+BASIC-LIC (Basic license, including IPv6) and 76-ES+ADVIP-LIC (Advanced IP license).
    The Basic license entitles you to use the Cisco IOS Software Release 12.2SR functions on the ES Plus line cards with the following exceptions:

    • Multicast VPN (MVPN)

    • Layer 3 IP/MPLS VPN/6VPE

    • Cisco Intelligent Services Gateway (ISG)

    Cisco 7600 Series ES Plus Advanced IP License

    The Advanced IP license entitles you to use Cisco IOS Software Release 12.2SR on the Cisco 7600 ES Plus line cards with the following functions in addition to the Basic license:

    • 6VPE

    • Layer 3 IP/MPLS VPN

    • MVPN

    • One Advanced IP license is needed for each of the ES Plus line cards in the system where these features are enabled.

    The Advanced IP license does not entitle you to use features contained in the Optical Transport Network, Intelligent Services Gateway, or Video Services Licenses on the Cisco 7600 Series ES Plus Line Cards.

    Cisco 7600 Series ES Plus Optical Transport Network License

    The Optical Transport Network license (part number 76-ES+OTN-LIC) is available for purchase when the OTN capability (G.709/FEC/EFEC) is to be used, and is required on each line card where OTN will be enabled.

    Ordering Information

    Table 14. Ordering Information

     

     

    Product Description

    Part Number

    Cisco 7600 Series ES Plus Transport, 20xGE ports, SFP

    76-ES+T-20G

    Cisco 7600 Series ES Plus Transport, 40xGE ports, SFP

    76-ES+T-40G

    Cisco 7600 Series ES Plus Transport, LAN/WAN PHY, OTN/G.709, 2x10GE, XFP

    76-ES+T-2TG

    Cisco 7600 Series ES Plus Transport, LAN/WAN PHY, OTN/G.709, 4x10GE, XFP

    76-ES+T-4TG

    Cisco 7600 Series Ethernet Services + Basic License

    76-ES+BASIC-LIC

    Cisco 7600 Series Ethernet Services + Advanced License

    76-ES+ADVIP-LIC

    Cisco 7600 Series ES Plus OTN PHY (G.709/FEC/EFEC) License (10 GE line cards only)

    76-ES+OTN-LIC

     

    Additional Information

    SKU 76-ES+T-20G-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/7600-series-routers/data_sheet_c78-570730.html
    Condition Refresh
    Module Type Line Card

    76-ES+T-20G-RF

    AED

    AED 0

    0