76-ES+XT4TG3CXL-RF

Double click on above image to view full picture

Zoom Out
Zoom In

76-ES+XT4TG3CXL-RF

Description:

Cisco Refurbished
Original Part No : 76-ES+XT-4TG3CXL=

7600ES+XT,LAN/WAN PHY,G709,4x10GE,XFP,DFC3CXL REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 186000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco ® 7600 Series Ethernet Services Plus Extended Transport (ES Plus XT) line cards allow service prioritization for voice, video, data, and wireless mobility services and can connect to LAN, WAN, and Optical Transport Network Physical Layer (OTN PHY) interfaces. Service providers and enterprises benefit from the efficiency gains in power consumption, improved economics from higher density, as well as advanced Carrier Ethernet features, which can be transported using G.709 and Forward Error Correction (FEC) across dense wavelength-division multiplexing (DWDM) networks, enabling optical links to span greater distances.
    The ES Plus XT cards use an architecture first developed for the Cisco 7600 Series ES Plus card family, with programmable interface processors that protect network investments and reduce total cost of ownership. The extensible design maximizes connectivity options and offers superior service intelligence through programmable interface processors operating at line rate. This data sheet contains the specifications for the Cisco 7600 ES+ Series line cards as shown in Figure 1.

    Figure 1. Cisco 7600 Series ES Plus XT line cards: 4-Port 10 GE and 2-Port 10 GE

     

    Product Overview

    Designed for interface flexibility and IP-over-DWDM integration in Carrier Ethernet, IP/Multiprotocol Label Switching (MPLS) provider edge, and WAN/MAN applications, the Cisco 7600 Series ES Plus XT line cards support up to 40 Gbps of bandwidth with four ports of 10 Gigabit Ethernet interfaces, or 20 Gbps with two ports of 10 Gigabit Ethernet. The cards feature hierarchical quality of service (QoS), locally significant VLANs, and up to 16,000 VLAN IDs per line card for rich services at scale. The cards provide the unique ability to combine both Layer 2 and Layer 3 services on the same line card. The combination of native Ethernet Layer 2 switching, bridging, Virtual Private LAN Services (VPLS), Ethernet over MPLS (EoMPLS), and Layer 3 IP/MPLS routing distinguishes this line card among other products on the market, particularly in Carrier Ethernet applications.
    Additionally, the line cards have integrated G.709 Generic Forward Error Correction (available with the purchase of the 76-ES+OTN/G.709 license) to span regional distances with integration directly into OTN devices such as the Cisco ONS 15454 Multiservice Transport Platform (MSTP) or core routers such as the Cisco CRS-1 Carrier Routing System. The ability to span even greater distances between Cisco 7600 Series Routers is supported with Enhanced Forward Error Correction (EFEC) in the ES Plus XT cards (back-to-back ES Plus XT connections). Operations, administration, and maintenance (OA&M) capabilities are supported in both OTN and WAN PHY interface controller modes, providing insight into link quality and data transmission health.
    The ES Plus line cards also include synchronization circuitry enabling them to provide standards-based functions for delivering and deriving transport-class network timing, enabling support of network-synchronized services and applications such as mobile backhaul and time-division multiplexing (TDM) migration.
    Recognizing that real-time media dominate next-generation services, Cisco has integrated video monitoring technology into the ES Plus line cards. This multimedia technology enables real-time monitoring and statistics collection for video flows, enabling proactive maintenance and management of today's media-rich services - without the use of additional service modules or external probes. To see a video demonstration of inline video monitoring from Cisco in action, visithttp://www.cisco.com/web/solutions/routingswitching/vidmon.html
    The innovative architecture of these industry-leading, premium Ethernet services line cards is designed to deliver cost-effective high-touch features, combining both application-specific integrated circuit (ASIC) and network processor technology for optimal performance and flexibility. The Cisco 7600 Series ES Plus XT line cards provide distributed forwarding with proven ASIC technology in the forwarding path (routing, switching, NetFlow, access control lists [ACLs]), and queuing and shaping functions to optimize the performance of these foundational features. Additionally, four (for the ES Plus XT 40G line cards) or two (for the ES Plus XT 20G line cards) programmable network processors are included in the forwarding plane to facilitate flexibility and feature growth. This ideal technology combination provides customers with the necessary flexibility for future service deployments and allows them to scale the system capacity as required.

    Key Features and Benefits

    Table 1. Key Features and Benefits of the Cisco 7600 Series ES Plus XT line cards

     

     

    Feature

    ES+ Plus XT line cards

    Benefit

    Line card form factor

    4-port 10 GE and
    2-port 10 GE

    Offers economical, high-density, high-performance, premium Carrier Ethernet services with excellent scalability

    Performance

    Line rate with services enabled

    Provides line-rate forwarding performance on GE and 10 GE interfaces with services enabled

    Packet memory

    512 MB

    Up to 200 ms combined bidirectional buffering

    Switch fabric connectivity

    Two 20-Gbps fabric channels

    Utilizes the Cisco 7600 Series 720-Gbps switch fabric for data forwarding; 2 fabric channels are utilized that are not present in slots 1 through 8 on the Cisco 7613 chassis

    Online insertion and removal (OIR)

    Supports OIR of the line cards

    Provides hitless OIR to minimize impact of add/change/remove operations

     

    Product Specifications

    Table 2. Product Specifications

     

     

    Description

    Specification

    Chassis compatibility

    All Cisco 7600 Series Router chassis, except the Cisco 7603, which is end of sale/end of life. The Cisco 7603-S is fully supported.

    Central forwarding engine compatibility

    Cisco Supervisor Engine 720-3B, 720-3BXL, Route Switch Processor 720 (RSP720) and later.

    ES Plus line cards require dual-channel switch fabric connectivity; therefore, the cards are not supported with the Supervisor Engine 32 or in slots 1 through 8 of the Cisco 7613 chassis.

    Distributed forwarding card (DFC)

    Choice of Cisco Distributed Forwarding Card 3C (DFC-3C) or DFC-3CXL

    Line-rate distributed forwarding with services enabled, up to ~48 Mpps per line card

    DFC-3C

    • Designed for Carrier Ethernet-based infrastructures
    • Up to 256,000 hardware-based forwarding entries with DFC-3C
    • Up to 128,000 NetFlow entries with DFC-3C

    DFC-3CXL

    • Optimized for IP/MPLS provider edge offering multiple IP services such as Layer 3 VPNs, IPv6, and triple- or quad-play services
    • Up to 1 million hardware-based forwarding entries with DFC-3CXL
    • Up to 256,000 NetFlow entries with DFC-3CXL

    Minimum software

    Cisco IOS® Software Release 12.2SRD1 or later

    Packet memory

    512 MB for 200 ms of combined input and output buffering at 10 Gbps

    Link encapsulations

    Ethernet II and IEEE 802.1q encapsulations

    Hardware queues

    ES Plus XT 40G line cards

    • 128,000 ingress queues
    • 128,000 egress queues

    ES Plus XT 20G line cards

    • 64,000 ingress queues
    • 64,000 egress queues

    Hierarchical QoS (H-QoS)

    MAC addresses

    Up to 96,000 MAC addresses per ES Plus XT line card

    16,000 VLAN IDs per line card (within Flexible QinQ configuration guidelines)

    Hardware-based MAC learning at wire rate

    Environmental conditions

    Operating temperature: 32 to 104°F (0 to 40°C)

    Storage temperature: -40 to 167°F (-40 to 75°C)

    Relative humidity: 10 to 90 percent, noncondensing

    Operating altitude: -60 to 2000m

    MIBs

    Cisco Optical Transport Network MIB (CISCO-OTN-MIB)

    Cisco Entity MIB (CISCO-ENTITY-MIB)

    Cisco Entity Asset MIB

    Cisco Entity Field-Replaceable Unit (FRU) Control MIB

    Cisco Entity Alarm MIB

    Interface IF MIB (RFC 2233)

    Definitions of Managed Objects for Bridges (RFC 1493)

    Evolution of Interfaces Group of MIB-II (RFC 1573)

    Simple Network Management Protocol (SNMP) MIB II (RFC 1213)

    Remote Monitoring (RMON) MIB (RFC 1757)

    Switch Monitoring (SMON) MIB

    Video Monitoring MIBs:

    CISCO-FLOW-MONITOR-TC-MIB, CISCO-FLOW-MONITOR-MIB

    CISCO-MDI-METRICS-MIB, CISCO-IP-CBR-METRICS-MIB

    Details on the MIBs above can be found at this link:
    http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/7600mibs/

    Network management

    CiscoWorks, CiscoView, CiscoWorks Resource Manager Essentials (RME), Cisco ANA, Cisco VAMS.

    Physical specifications

    Occupies 1 slot in a Cisco 7600 Series Router

    Up to 8 ES Plus line cards (any type) in a Cisco 7609 or 7609-S 9-slot chassis

    Requires Cisco Supervisor Engine 720-3B or 3BXL, Route Switch Processor 720 or later

    Dimensions (H x W x D): 1.75 x 15.375 x 16 in.

    Weight:

    • 76-ES+XT-2TG 11.5 lbs
    • 76-ES+XT-4TG 12.4 lbs

    Maximum power consumption (watts)

    76-ES+XT-2TG3C 273W

    76-ES+XT-2TG3CXL 301W

    76-ES+XT-4TG3C 378W

    76-ES+XT-4TG3CXL 406W

    Indicators

    Status: green (operational); orange (faulty)

    Regulatory compliance

    CE Marking

    Safety

    UL 60950

    CSA C22.2 No. 60950

    EN60950

    TS001

    IEC 60950

    AS/NZS3260

    ITU-T G.664 (Automatic Laser Shutdown - ALS)

    Electromagnetic compatibility

    FCC Part 15 Class A

    ICES-003 Class A

    VCCI Class A

    EN55022 Class A

    CISPR22 Class A

    AS/NZS3548 Class A

    EN61000-3-2

    EN61000-3-3

    EN55024

    EN61000-6-1

    EN50082-1

    EN300 386

    Telecommuni-cations standards

    ITU-T G.664 (ALS)

    ITU-T G.691

    ITU-T G.707

    ITU-T G.709 (OTN)

    ITU-T G.783 Sections 9-10

    ITU-T G.784

    ITU-T G.803

    ITU-T G.813

    ITU-T G.825

    ITU-T G.826

    ITU-T G.841

    ITU-T G.957 Table 3

    ITU-T G.958FCC Part 15 Class A

    ITU-T G.975.I.4 (EFEC)

    Network clock references

    GR-253-CORE (SONET)

    GR-1244-CORE (BITS)

    G.8261 (No SSM)

    G.8262

    G.8264 (No ESMC)

     

    Table 3. Feature Support

     

     

    Description

    Specification

    Carrier Ethernet and IP/MPLS network protocols

    IPv4 unicast and multicast

    IPv6 unicast and multicast

    Layer 2 multicast

    MPLS Provider Edge Layer 2 and Layer 3 VPNs

    MPLS Traffic Engineering (MPLS-TE)

    MPLS Fast Reroute (FRR)

    Differentiated Services (Diff-Serv) aware MPLS TE

    Layer 2 Tunneling Protocol Version 3 (L2TPv3)

    Generic Routing Encapsulation (GRE) and IP-in-IP tunneling

    Ethernet Bridging and Ethernet Multipoint Bridging (E-MPB)

    Ethernet switching

    Ethernet over MPLS (EoMPLS)

    Switch port - access and trunk

    QinQ termination

    Selective QinQ

    Flexible QinQ

    VLAN translation

    Private VLAN

    VPLS and H-VPLS

    VLAN and Spanning Tree Protocols

    Per VLAN Spanning Tree (PVST)

    Carrier Ethernet and IP/MPLS network protocols (continued)

    Virtual Switch Tagging (VST)

    Rapid Spanning Tree Protocol (RSTP)

    Multiple Spanning Tree (MST) Protocol - IEEE 802.1s

    VLAN ACL (VACL)

    VLAN Trunking Protocol (VTP)

    Resilient Ethernet Protocol (REP)

    Ethernet Operations, Administration, and Maintenance (E-OAM), Connection

    Fault Management (CFM), and Y.1731

    802.1ah

    QoS

    Modular QoS CLI (MQC)

    Policing granularity down to ingress, egress, physical interfaces, and VLAN

    Access control lists (ACL)

    Classification, marking, policing, and queuing

    Diff-Serv Code Point (DSCP)

    Complex re-marking of Ethernet and IP/MPLS headers

    Congestion avoidance

    Weighted Random Early Detection (WRED) based on IP Prec, DSCP, MPLS EXP

    Queuing and shaping

    Enhanced Class-Based Weighted Fair Queuing (CBWFQ)

    Egress low-latency queuing (LLQ); traffic inside LLQ may be shaped

    Two levels of queuing hierarchy

    Egress shaping

    Traffic classification and bandwidth policing

    Classification based on:

    Extended ACL

    IP Precedence/IP DSCP

    MPLS Experimental Bits (EXP)

    VLAN

    Input VLAN

    Policer: Ingress single- and dual-rate, three color

    ACLs and security

    Up to 32,000 access list entries with no forwarding degradation

    Hardware counters for ACL hits

    Layer 2 and Layer 3 VPNs

    Layer 2 VPNs

    EoMPLS with MAC learning

    H-VPLS (MPLS edge or IEEE 802.1ad edge)

    Flexible QinQ

    Layer 3 VPNs

    MPLS VPN (RFC 2547-bis)

    Inter-AS and Carrier-Supporting-Carrier

    Multicast VPN

    mLDP based Multicast VPN (mVPN)

    Multicast VPN Extranet

    802.1ah

    Protection and bundling

    MPLS Fast Reroute

    IEEE 802.3ad and EtherChannel®

     

    Table 4. Inline Video Monitoring Feature Support

     

     

    Description

    Specification

    Summary

    Supported on all ES+ linecards

    Supported with supervisor engines Sup720 and RSP720 (1 gigabits and 10 gigabits)

    Monitoring on both ingress and egress interfaces

    IP/UDP encapsulated unicast and multicast video streams

    VBR and CBR video streams

    Compressed and uncompressed video streams

    Metrics

    RFC4445 Media Delivery Index (MDI) consisting of Delay Factor (DF), and Media Loss Rate (MLR), plus Media Discontinuity Count (MDC) - for MPEG video within M2TS (SPTS/MPTS)

    Delay Factor and Media Rate Variation (MRV)

    MDI:DF, MDI:MLR, MDI:MDC, IP-CBR:DF, and IP-CBR:MRV metrics are supported for CBR flows

    MDI:MLR and MDI:MDC are supported for VBR flows

    Performance

    Flow rates up to 10Gbps and a total of up to 40Gbps per linecard

    Up to 8000 flows per chassis and 1000 flows per linecard

    Management

    Media Stop Events (MSE)

    Threshold Crossing Alerts (TCA)

    Syslog support

    SNMP MIBs

    Full integration with Cisco's Video Assurance Management Solution (VAMS)

    http://www.cisco.com/en/US/products/ps9518/index.html

     

    Table 5. OTN Feature Support

     

     

    Description

    Specification

    Protocol support

    OTN G.709 compliant, selectable

    Mapping of IEEE 802.3ae 10GBASE-R signal into an overclocked

    OPU1e running at 11.0491 Gbps

    OPU2e running at 11.0975 Gbps

    Internal (system) and line (network) loopback

    Local (internal) or loop (recovered from network) timing

    ±100 ppm local clock accuracy over operating temperature

    Alarms and performance monitoring

    Alarm reporting:

    • Loss of signal (LOS)
    • Loss of OTN frame (LOF)
    • Loss of OTN multiframe (LOM)
    • OTU alarm indication signal (OTU-AIS)
    • OTU backward defect indication (OTU-BDI)
    • ODU alarm indication signal (ODU-AIS)
    • ODU open connection indication (ODU-OCI)
    • ODU locked (ODU-LCK)
    • ODU backward defect indication (ODU-BDI)
    • ODU payload type identifier mismatch (ODU-PTIM)
    • OTU incoming alignment (OTU-IAE)

    OTU_SF_BER and OTU_SD_BER alarms based on monitoring OTU BIP errors with a user-settable threshold crossing

    Error counts: OTU BIP, OTU BEI, ODU BIP, and ODU BEI

    Threshold crossing alerts (TCAs) for OTU BIP errors (SM-TCA) and ODU BIP errors (PM-TCA) with user-settable threshold

    FEC features

    No FEC: ability to turn off error correction for use with non-FEC supporting interfaces

    GFEC: standard G.709

    EFEC: standard G.975.I.4

    FEC statistics for corrected errors (EC), last second corrected errors (EC), and uncorrected words (UC)

     

    Table 6. DWDM Line Interface Specification

     

     

    Description

    Specification

    Bit rate

    9.953280 Gbps +/- 4.6 ppm

    10.3125 Gbps +/- 4.6 ppm

    11.049 Gbps +/- 4.6 ppm

    11.0957 Gbps +/- 4.6 ppm

    Spectral width at 20 dB (lambda delta20)

    ≤ 30  GHz

    Optical Transmitter

    Type

    Lithium niobate external modulator

    Output power (PTmin to PTmax)

     -1 dBm, + 3 dBm

    Required optical return loss, minimum (ORLmin)

    27 dB

    Extinction ratio, minimum (reminx)

    > 9 dB

    Laser safety class

    1

    Optical Receiver

    Type

    Avalanche photo diode (APD)

    Chromatic dispersion tolerance (DLRmax)

    Up to 1600 ps/nm

    Minimum BER (BERmin)

    FEC off

    FEC on

    E-FEC on

     

    10E-12

    10E-15

    10E-15

    Reflectance between far-end Tx and near-end Rx (maximum)

    -27 dB

    Input wavelength bandwidth (lambdac_rx)

    1260 nm to 1607 nm

    Connector type (Tx/Rx)

    LC, duplex

     

    Table 7. Optical Performance

     

     

    DWDM XFP Fixed Wavelength

    Long wavelength performance (1570 nm to 1607 nm) applicable at 9.9, 10.3 only

    Pin @ 23dB OSNR, BER<10-12

     

    -7 to -22

    dBm

    Long wavelength performance ( 1529 nm to 1562 nm C-band)

    No FEC applications (Note b) applicable at 9.9 Gbps, 10.3 Gbps only

    Pin @ 23dB OSNR, BER<10-12

     

    -7 to -23

    dBm

    Pin @ 23dB OSNR, BER<10-12

    -500 to +1600 ps/nm

    -7 to -20

    dBm

    No FEC applications applicable at 9.9 Gbps, 10.3 Gbps only

    Pin @ 17dB OSNR, BER<10-12

     

    -7 to -18

    dBm

    Pin @ 20dB OSNR, BER<10-12

    -500 to +1600 ps/nm

    -7 to -18

    dBm

    FEC applications (Note c) applicable at 11.09 Gbps only

    Pin @ 11 dB OSNR, BER<10-5

     

    -7 to -18

    dBm

    Pin @ 12 dB OSNR, BER<10-5

    -500 to +1100 ps/nm

    -7 to -18

    dBm

    Enhanced-FEC applications (Note c) applicable at 11.09 Gbps only

    Pin @ 23dB OSNR, BER<7*10-4

     

    -7 to -27

    dBm

    Pin @ 23dB OSNR, BER<7*10-4

    -500 to +1300 ps/nm

    -7 to -24

    dBm

    Enhanced-FEC applications (Note c) applicable at 11.09 Gbps only

    Pin @ 8 dB OSNR, BER<7*10-4

     

    -7 to -18

    dBm

    Pin @ 9dB OSNR, BER<7*10-4

    -500 to +1100 ps/nm

    -7 to -18

    dBm

     

    Table 8. SONET/SDH WAN PHY Feature Support

     

     

    SONET/SDH Features and Functions

    Ethernet WAN Interface

    Comments

    Synchronization

    Supported

    Ethernet WAN interface cannot be used in SONET/SDH rings

    Section, line, and path BIP8

    Supported

    Errors are detected and counted

    Section trace

    Supported

     

    Pointer operation/action

    Supported

    H1, H2 are used to get the location of SPE

    Defects or anomalies: LOS, SEF, LOF, S-BIP, L-BIP, AIS-L, RDI-L, AIS-P, LOP-P, P-BIP, PLM-P

    Supported

    Counters for section, line, and path BIP errors

     

    Table 9. ES Plus Line Card XFP and SFP Modules Supported

     

     

    Part Number for ES Plus line cards 10-Gbps Small Form-Factor Pluggable (XFP)

    Wavelength

    Mode

    Distance

    XFP-10GZR-OC192LR, LAN-PHY

    1550 nm

    Single mode (SM)

    49.7 miles (80 km)

    XFP-10GER-OC192IR+, LAN-PHY

    1550 nm

    SM

    24.8 miles (40 km)

    XFP-10GLR-OC192SR, LAN-PHY

    1310 nm

    SM

    6.2 miles (10 km)

     

    Table 10. Ordering Information for Cisco ES Plus line cards 10 GE Dense Wavelength-Division Multiplexing (DWDM) XFP Modules
    Note: The following DWDM XFP products are orderable as spares only.

     

     

    Product Number

    Description

    ITU Channel

    DWDM-XFP-60.61=

    10GBASE-DWDM 1560.61 nm XFP (100-GHz ITU grid)

    21

    DWDM-XFP-59.79=

    10GBASE-DWDM 1559.79 nm XFP (100-GHz ITU grid)

    22

    DWDM-XFP-58.98=

    10GBASE-DWDM 1558.98 nm XFP (100-GHz ITU grid)

    23

    DWDM-XFP-58.17=

    10GBASE-DWDM 1558.17 nm XFP (100-GHz ITU grid)

    24

    DWDM-XFP-56.55=

    10GBASE-DWDM 1556.55 nm XFP (100-GHz ITU grid)

    26

    DWDM-XFP-55.75=

    10GBASE-DWDM 1555.75 nm XFP (100-GHz ITU grid)

    27

    DWDM-XFP-54.94=

    10GBASE-DWDM 1554.94 nm XFP (100-GHz ITU grid)

    28

    DWDM-XFP-54.13=

    10GBASE-DWDM 1554.13 nm XFP (100-GHz ITU grid)

    29

    DWDM-XFP-52.52=

    10GBASE-DWDM 1552.52 nm XFP (100-GHz ITU grid)

    31

    DWDM-XFP-51.72=

    10GBASE-DWDM 1551.72 nm XFP (100-GHz ITU grid)

    32

    DWDM-XFP-50.92=

    10GBASE-DWDM 1550.92 nm XFP (100-GHz ITU grid)

    33

    DWDM-XFP-50.12=

    10GBASE-DWDM 1550.12 nm XFP (100-GHz ITU grid)

    34

    DWDM-XFP-48.51=

    10GBASE-DWDM 1548.51 nm XFP (100-GHz ITU grid)

    36

    DWDM-XFP-47.72=

    10GBASE-DWDM 1547.72 nm XFP (100-GHz ITU grid)

    37

    DWDM-XFP-46.92=

    10GBASE-DWDM 1546.92 nm XFP (100-GHz ITU grid)

    38

    DWDM-XFP-46.12=

    10GBASE-DWDM 1546.12 nm XFP (100-GHz ITU grid)

    39

    DWDM-XFP-44.53=

    10GBASE-DWDM 1544.53 nm XFP (100-GHz ITU grid)

    41

    DWDM-XFP-43.73=

    10GBASE-DWDM 1543.73 nm XFP (100-GHz ITU grid)

    42

    DWDM-XFP-42.94=

    10GBASE-DWDM 1542.94 nm XFP (100-GHz ITU grid)

    43

    DWDM-XFP-42.14=

    10GBASE-DWDM 1542.14 nm XFP (100-GHz ITU grid)

    44

    DWDM-XFP-40.56=

    10GBASE-DWDM 1540.56 nm XFP (100-GHz ITU grid)

    46

    DWDM-XFP-39.77=

    10GBASE-DWDM 1539.77 nm XFP (100-GHz ITU grid)

    47

    DWDM-XFP-38.98=

    10GBASE-DWDM 1538.98 nm XFP (100-GHz ITU grid)

    48

    DWDM-XFP-38.19=

    10GBASE-DWDM 1538.19 nm XFP (100-GHz ITU grid)

    49

    DWDM-XFP-36.61=

    10GBASE-DWDM 1536.61 nm XFP (100-GHz ITU grid)

    51

    DWDM-XFP-35.82=

    10GBASE-DWDM 1535.82 nm XFP (100-GHz ITU grid)

    52

    DWDM-XFP-35.04=

    10GBASE-DWDM 1535.04 nm XFP (100-GHz ITU grid)

    53

    DWDM-XFP-34.25=

    10GBASE-DWDM 1534.25 nm XFP (100-GHz ITU grid)

    54

    DWDM-XFP-32.68=

    10GBASE-DWDM 1532.68 nm XFP (100-GHz ITU grid)

    56

    DWDM-XFP-31.90=

    10GBASE-DWDM 1531.90 nm XFP (100-GHz ITU grid)

    57

    DWDM-XFP-31.12=

    10GBASE-DWDM 1531.12 nm XFP (100-GHz ITU grid)

    58

    DWDM-XFP-30.33=

    10GBASE-DWDM 1530.33 nm XFP (100-GHz ITU grid)

    59

     

    Licensing Information

    Cisco 7600 Series ES Plus Basic IP License

    The ES Plus line cards have two feature license options, with the following part numbers: 76-ES+BASIC-LIC (Basic license, including IPv6) and 76-ES+ADVIP-LIC (Advanced IP license).
    The Basic license entitles you to use the Cisco IOS Software Release 12.2SR or Release 15S functions on the Cisco 7600 ES Plus line cards with the following exceptions:

    • Multicast VPN (MVPN)

    • Layer 3 IP/MPLS VPN/6VPE

    • Cisco Intelligent Services Gateway (ISG)

    • Optical Transport Network (OTN) - IPoDWDM

    • Inline Video Monitoring (Vidmon)

    Cisco 7600 Series ES Plus Advanced IP License

    The Advanced IP license entitles you to use Cisco IOS Software Release 12.2SR or Release 15S on the Cisco 7600 Series ES Plus line cards with the following functions in addition to the Basic license:

    • 6VPE

    • Layer 3 IP/MPLS VPN

    • MVPN

    • One Advanced IP license is needed for each of the ES Plus line cards in the system where these features are enabled.

    The Advanced IP license does not entitle you to use features contained in the Optical Transport Network, Intelligent Services Gateway, or Video Services Licenses on the Cisco 7600 Series ES Plus line cards.

    Cisco 7600 Series ES Plus Optical Transport Network License

    The Optical Transport Network license (part number 76-ES+OTN-LIC) is available for purchase when the OTN capability (G.709/FEC/EFEC) is to be used, and is required on each line card where OTN will be enabled.

    Cisco 7600 Series ES Plus Intelligent Services Gateway License

    The Intelligent Services Gateway license (part number 76-ES+ISG-LIC) entitles use of the BNG features of Cisco IOS Software Release 12.2SR or Release 15S on the Cisco 7600 Series ES Plus line cards.

    • The 76-ES+ISG-LIC is purchased per chassis in increments of 8000 subscribers requiring BNG features with 8 MPLS VPNs per license.

    Cisco 7600 Series ES Plus Video Monitoring License

    • The ES Plus Video Monitoring license (part number 76-ES+VIDEO-LIC) is available for purchase when the Video Monitoring capability is to be used, and is required on each chassis where Video Monitoring will be performed.

    Ordering Information

    Table 11. Ordering Information

     

     

    Product Description

    Part Number

    Cisco 7600 Series ES Plus XT, LAN/WAN PHY, OTN/G.709, 2x10GE, XFP, DFC3C

    76-ES+XT-2TG3C

    Cisco 7600 Series ES Plus XT, LAN/WAN PHY, OTN/G.709, 2x10GE, XFP, DFC3CXL

    76-ES+XT-2TG3CXL

    Cisco 7600 Series ES Plus XT, LAN/WAN PHY, OTN/G.709, 4x10GE, XFP, DFC3C

    76-ES+XT-4TG3C

    Cisco 7600 Series ES Plus XT, LAN/WAN PHY, OTN/G.709, 4x10GE, XFP, DFC3CXL

    76-ES+XT-4TG3CXL

    Cisco 7600 Series Ethernet Services Plus Basic License

    76-ES+BASIC-LIC

    Cisco 7600 Series Ethernet Services Plus Advanced License

    76-ES+ADVIP-LIC

    Cisco 7600 Series ES Plus OTN PHY (G.709/FEC/EFEC) License

    76-ES+OTN-LIC

    Cisco 7600 Series Ethernet Services Plus Intelligent Services Gateway License

    76-ES+ISG-LIC

    Cisco 7600 Series Ethernet Services Plus Video Monitoring License

    76-ES+VIDEO-LIC

     

    Additional Information

    SKU 76-ES+XT4TG3CXL-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/7600-series-routers/data_sheet_c78-549419.html
    Condition Refresh
    Module Type Ethernet Serives Plus Line Card

    76-ES+XT4TG3CXL-RF

    AED

    AED 0

    0