Double click on above image to view full picture

Zoom Out
Zoom In



Cisco Refurbished
Original Part No : A9K-24X10GE-SE=

ASR 9000 24port 10GE,Service EdgeOptimized LC REMANUFACTURED

Availability: In stock

Available Quantity: 480000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® ASR 9000 Series 24-Port 10 Gigabit Ethernet Line Cards deliver an industry-leading twenty-four 10-Gigabit Ethernet ports to any slot of a Cisco ASR 9000 Series Aggregation Services Router. These high-capacity line cards are designed to remove bandwidth bottlenecks in the network today that are caused by a large increase in video-on-demand (VoD), IPTV, point-to-point video, Internet video, and cloud services traffic. These line cards deliver economical, scalable, highly available, line-rate Ethernet and IP/Multiprotocol Label Switching (MPLS) edge services. The Cisco ASR 9000 Series line cards and routers are designed to provide the fundamental infrastructure for scalable Carrier Ethernet and IP/MPLS networks, allowing profitable business, residential, and mobile services (Figure 1).

    Figure 1.      Cisco ASR Series 9000 24-Port 10 Gigabit Ethernet Line Card


    Features and Benefits

    The Cisco ASR 9000 Series 24-Port 10 Gigabit Ethernet Line Cards are fully compatible with all Cisco ASR 9000 Series chassis, route switch processors (RSPs), and line cards. No hardware upgrade to the chassis or cooling system is required. Total bandwidth is dependent on the number and type of RSPs installed. The Cisco ASR 9000 Series 24-Port 10 Gigabit Ethernet Line Cards are also fully compatible with the 22-slot Cisco ASR 9922 chassis.

    Each line card provides simultaneous support for both Layer 2 and Layer 3 services and features, helping operators qualify and stock a single line card that can be deployed in any combination of Layer 2 and Layer 3 applications, thereby reducing capital expenditures (CapEx) and operating expenses (OpEx), as well as reducing the time required to develop and deploy new services. The Cisco ASR 9000 Series Ethernet line cards set a new standard for Layer 2 and Layer 3 service density and scale, allowing operators to offer predictable, managed transport services while optimizing the use of network assets.

    The line cards, with their synchronization circuitry and dedicated backplane timing traces for accessing the RSP’s Stratum-3 subsystem, provide standards-based line-interface functions for delivering and deriving transport-class network timing, allowing support of network-synchronized services and applications such as mobile backhaul and time-division multiplexing (TDM) migration. Coupled with the proper RSP, the line cards can also be used for applications requiring IEEE 1588v2 synchronization services. Recognizing that real-time media dominate next-generation services, Cisco has integrated media-monitoring technology into the Cisco ASR 9000 Series Ethernet line cards. This multimedia technology allows real-time monitoring and statistics collection of real-time video and voice flows, facilitating proactive maintenance and management of today’s comprehensive media services.

    Addressing the advantages of consolidating IP with the transport network, G.709 with Advanced Forward Error Correction (FEC) is provided. G.709 provides visibility into the transmission system to permit rapid detection and recovery from transmission-layer impairments. G.709 can also be configured for proactive protection if signal degradation is detected; it prevents traffic loss and link outages. The Advanced FEC extends transmission-layer performance, delivering extended performance over an amplified system without the cost of regeneration or transponders.

    Table 1 lists the features and benefits of the Cisco ASR 9000 Series Ethernet line cards. Specific feature and scale support is hardware and software dependent.

    Table 1.       Features and Benefits of Cisco ASR 9000 Series 24-Port 10 Gigabit Ethernet Line Cards



    Interface Support

    Enhanced Small Form-Factor Pluggable (SFP+) interfaces

    Provide the capability to mix and match10-Gigabit Ethernet interface types across a single line card. For a complete list of supported interfaces, please see the Cisco ASR 9000 Transceiver Modules: Line Card Support data sheet.

    G.709 and Advanced FEC

    Standard G.709 providing transmission-layer operations, administration, and maintenance (OA&M); G.709 Standard FEC and Advanced FEC for enhanced transmission system performance

    Scalable and Integrated Multiservice Support

    Layer 2 and Layer 3 services

    Combined IP, MPLS, Ethernet, Layer 2 VPN (L2VPN), and Layer 3 VPN (L3VPN) services

    Evolutionary Monitoring

    Carrier-class OA&M

    NetFlow, IEEE 802.1ag, IEEE 802.3ah, ITU Y.1731, IP service-level agreement (IP SLA), virtual circuit connectivity verification (VCCV), ping, and traceroute

    Video monitoring (VidMon)

    Provides real-time monitoring of video flows, including issuance of an alarm upon degradation

    Carrier-Grade OS

    Cisco IOS® XR Software

    Modular, patchable, restartable, scalable, highly available, carrier-core and edge-proven operating system

    T-Class Synchronization

    Synchronous Ethernet

    Derives and provides synchronization from and to Ethernet interfaces, Cisco ASR 9000 Series RSPs, and network synchronization interfaces

    IEEE 1588-2008

    Cisco ASR 9000 support of the IEEE 1588-2008 protocol, providing the capability to distribute precision time and frequency across the network

    Line Card Types

    The Cisco ASR 9000 Series 24-Port 10 Gigabit Ethernet Line Cards are available in Service Edge Optimized and Packet Transport Optimized variants.

    ●   Service Edge Optimized line cards are designed for customer deployments requiring enhanced quality of service (QoS).

    ●   Packet Transport Optimized line cards are designed for network deployments where basic QoS is required.

    Different line card types may be mixed within the same system.

    Feature licenses are also available to turn on advanced features on the line cards, as described in the “Software Licensing” section later in this document.

    Product Specifications

    Table 2 provides product specifications for the Cisco ASR 9000 Series 24-Port 10 Gigabit Ethernet Line Cards.

    Table 2.       Product Specifications



    Chassis compatibility

    Compatible with the Cisco ASR 9000 Series 22-slot, 10-slot, and 6-slot chassis

    Port density

    24 ports of 10 Gigabit Ethernet per line card


    ●  10-Gbps IEEE 802.3 compliant
    ●  10 Gigabit Ethernet PHY monitoring
    ●  IEEE 802.x flow control
    ●  Full-duplex operation
    ●  Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets


    ●  10-Gbps line-rate throughput per port


    Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport Optimized (basic QoS) line card

    Reliability and availability

    Line card online insertion and removal (OIR) support without system impact

    Physical dimensions (H x W x D); weight

    14 x 1.72 x 20.5 in.; 14 lb (35.56 x 4.37 x 52.07 cm; 6.35 kg)

    Network Equipment Building Standards (NEBS)

    Cisco ASR 9000 Series Routers are designed to meet:

    ●  SR-3580: NEBS Criteria Levels (Level 3)
    ●  GR-1089-CORE: NEBS EMC and Safety
    ●  GR-63-CORE: NEBS Physical Protection

    Operating temperature (nominal)

    41 to 104ºF (5 to 40ºC)

    Operating temperature 

    23 to 131ºF (–5 to 55ºC)

    Note: Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year (total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period).

    Operating humidity (nominal) (relative humidity)

    10 to 85%

    Storage temperature

    –40 to 158ºF (–40 to 70ºC)

    Storage (relative humidity)

    5 to 95%

    Note: Not to exceed 0.024 kg of water per kg of dry air

    Operating altitude

    –60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements)

    ETSI standards

    Cisco ASR 9000 Series Routers are designed to meet:

    ●  EN300 386: Telecommunications Network Equipment (EMC)
    ●  ETSI 300 019 Storage Class 1.1
    ●  ETSI 300 019 Transportation Class 2.3
    ●  ETSI 300 019 Stationary Use Class 3.1
    ●  EN55022: Information Technology Equipment (Emissions)
    ●  EN55024: Information Technology Equipment (Immunity)
    ●  EN50082-1/EN-61000-6-1: Generic Immunity Standard

    EMC standards

    Cisco ASR 9000 Series Routers are designed to meet:

    ●  FCC Class A
    ●  ICES 003 Class A
    ●  AS/NZS 3548 Class A
    ●  CISPR 22 (EN55022) Class A
    ●  VCCI Class A
    ●  BSMI Class A
    ●  IEC/EN 61000-3-2: Power Line Harmonics
    ●  IEC/EN 61000-3-3: Voltage Fluctuations and Flicker


    Cisco ASR 9000 Series Routers are designed to meet:

    ●  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
    ●  IEC/EN-61000-4-3: Radiated Immunity (10V/m)
    ●  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
    ●  IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
    ●  IEC/EN-61000-4-5: Signal Ports (1kV)
    ●  IEC/EN-61000-4-5: Surge DC Port (1kV)
    ●  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
    ●  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
    ●  IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations


    Cisco ASR 9000 Series Routers are designed to meet:

    ●  UL/CSA/IEC/EN 60950-1
    ●  IEC/EN 60825 Laser Safety
    ●  ACA TS001
    ●  AS/NZS 60950
    ●  FDA – Code of Federal Regulations Laser Safety


    Additional Information

    SKU A9K-24X10GE-SE-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/datasheet_C78-662708.html
    Condition Refresh
    Module Type Ethernet Line Card



    AED 0