A9K-MPA-20X1GE-RF

Double click on above image to view full picture

Zoom Out
Zoom In

A9K-MPA-20X1GE-RF

Description:

Cisco Refurbished
Original Part No : A9K-MPA-20X1GE=

ASR 9000 20-port 1GE Modular Port Adapter REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 15000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® ASR 9000 Series modular line cards provide customers with a flexible solution supporting multiple combinations of Ethernet ports, all in a single slot of the Cisco ASR 9000 Series Aggregation Services Routers. Modular line cards support a wide range of interfaces and densities offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco ASR 9000 modular line cards and modular port adapter portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology.

    Using the modular line cards, the Cisco ASR 9000 Series can support customer applications including video-on-demand, Internet Protocol Television (IPTV), point-to-point video, Internet video, and cloud-based computing. These line cards can also be used to deliver economical, scalable, highly available, line-rate Ethernet and IP/Multiprotocol Label Switching (IP/MPLS) edge services. The Cisco ASR 9000 Series line cards and routers are designed to provide the fundamental infrastructure for scalable Carrier Ethernet and IP/MPLS networks, supporting profitable business, residential, and mobile services (Figure 1).

    Figure 1.      Cisco ASR 9000 Series Modular Line Cards

     

    Features and Benefits

    The Cisco ASR 9000 Series modular line cards are fully compatible with the Cisco ASR 9922, 9010, and 9006 systems, route switch processors (RSPs), and line cards. No hardware upgrade to the chassis or cooling system is required. Total bandwidth is dependent on the number and type of RSPs installed.

    The new line cards deliver the ability to mix and match modular port adapters so that customers can customize each slot in the Cisco ASR 9000 to their specific port demands. As an example, a 4-port 10-Gigabit Ethernet modular port adapter can be matched with a 20-port 1-Gigabit Ethernet modular port adapter, all in a single slot.

    Each Cisco ASR 9000 Series modular line card provides simultaneous support for both Layer 2 and Layer 3 services and features, helping operators to qualify and stock a single line card that can be deployed in any combination of Layer 2 and Layer 3 applications. These capabilities help to reduce capital expenditures (CapEx) and operating expenses (OpEx), as well as reduce the time required to develop and deploy new services. The Cisco modular line cards set a new standard for service density, allowing operators to offer predictable, managed transport services while optimizing the use of network assets.

    The line cards, with their synchronization circuitry and dedicated backplane timing traces for accessing the RSP’s Stratum-3 subsystem, provide standards-based line-interface functions for delivering and deriving transport-class network timing, allowing support of network-synchronized services and applications such as mobile backhaul and time-division multiplexing (TDM) migration. Coupled with the Cisco RSP-440 route switch processor, the line cards can also be used for applications requiring IEEE 1588v2 synchronization services. Recognizing that real-time media dominate next-generation services, Cisco has integrated media-monitoring technology into the Cisco Modular line cards. This multimedia technology allows real-time monitoring and statistics collection of real-time video and voice flows, facilitating proactive maintenance and management of today’s interactive services.

    Addressing the advantages of consolidating IP and dense wavelength-division multiplexing (DWDM) networking, G.709 with Advanced Forward Error Correction (FEC) is provided. G.709 provides visibility into the DWDM transmission system to permit rapid detection and recovery from transmission-layer and DWDM impairments. G.709 can also be configured for proactive protection if signal degradation is detected; it prevents traffic loss and link outage. Advanced FEC extends transmission-layer performance, delivering extended performance over an amplified system without the cost of regeneration or transponders.

    Table 1 lists the features and benefits of the Cisco modular line cards. Specific feature and scale support is hardware and software dependent.

    Table 1.       Features and Benefits of Cisco ASR 9000 Series Modular Line Cards

    Feature

    Benefit

    Interface Support

    Pluggable 1-Gigabit Small Form-Factor Pluggable (SFP), 10-Gigabit SFP (XFP), and 40-Gigabit Quad SFP (QSFP) interfaces

    Provide the capability to mix and match interface types across a single line card; for a complete list of supported interfaces, please see Cisco ASR 9000 Transceiver Modules: Line Card Support data sheet

    G.709 and Advanced FEC

    Standard G.709 providing transmission-layer operations, administration, and maintenance (OA&M); G.709 Standard FEC and Advanced FEC for enhanced transmission system performance

    Scalable and Integrated Multiservice Support

    Layer 2 and Layer 3 services

    Combined IP, MPLS, Ethernet, Layer 2 VPN (L2VPN), and Layer 3 VPN (L3VPN) services

    Evolutionary Monitoring

    Carrier-class OA&M

    NetFlow, IEEE 802.1ag, IEEE 802.3ah, ITU Y.1731, IP service-level agreement (IP SLA), virtual circuit connectivity verification (VCCV), ping, and traceroute

    Video monitoring (VidMon)

    VidMon, providing real-time monitoring of video flows, including issuance of alarm upon degradation

    Carrier-Grade OS

    Cisco IOS® XR Software

    Modular, patchable, restartable, scalable, highly available, carrier-core and edge-proven operating system

    T-Class Synchronization

    Synchronous Ethernet

    Derives and provides synchronization from and to Ethernet interfaces, Cisco ASR 9000 Series RSPs, and network synchronization interfaces

    IEEE 1588-2008

    Cisco ASR 9000 Series support of the IEEE 1588-2008 protocol provides the capability to distribute precision time

    Line Card Types

    The Cisco ASR 9000 Series modular line cards are available in Service Edge Optimized and Packet Transport Optimized variants.

    ●   Service Edge Optimized line cards are designed for customer deployments requiring enhanced quality of service (QoS).

    ●   Packet Transport Optimized line cards are designed for network deployments where basic QoS is required.

    Different line card types may be mixed within the same system.

    Feature licenses are also available to turn on advanced features on the line cards, as described in the “Software Licensing” section later in this document.

    Product Specifications

    Table 2 provides product specifications for the Cisco ASR 9000 Series modular line cards.

    Table 2.       Product Specifications

    Description

    Specification

    Chassis compatibility

    Compatible with the Cisco ASR 9922, 9010, 9006 and 9001 systems

    Port density

    Up to 2 modular port adapters are supported per line card..

    Ethernet

    ●  IEEE 802.3 compliant
    ●  10 Gigabit Ethernet PHY monitoring
    ●  IEEE 802.x flow control
    ●  Full-duplex operation
    ●  Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets

    Card density

    Maximum number of line cards per system: Cisco ASR 9922 = 20, Cisco ASR 9010 = 8, and 
    Cisco ASR 9006 = 4

    Options

    Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport

    Optimized (basic QoS) line card.

    Reliability and availability

    Line card online insertion and removal (OIR) support without system impact

    Network Equipment Building Standards (NEBS)

    Cisco ASR 9000 Series Routers are designed to meet:

    ●  SR-3580: NEBS Criteria Levels (Level 3)
    ●  GR-1089-CORE: NEBS EMC and Safety
    ●  GR-63-CORE: NEBS Physical Protection

    Operating temperature (nominal)

    41 to 104ºF (5 to 40ºC)

    Operating temperature 
    (short-term)[1]

    23 to 131ºF (–5 to 55ºC)

    Operating humidity (nominal) relative humidity

    10 to 85%

    Storage temperature

    –40 to 158ºF (–40 to 70ºC)

    Storage relative humidity

    5 to 95%

    Note: Not to exceed 0.024 kg of water per kg of dry air

    Operating altitude

    –60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements)

    ETSI standards

    Cisco ASR 9000 Series Routers are designed to meet:

    ●  EN300 386: Telecommunications Network Equipment (EMC)
    ●  ETSI 300 019 Storage Class 1.1
    ●  ETSI 300 019 Transportation Class 2.3
    ●  ETSI 300 019 Stationary Use Class 3.1
    ●  EN55022: Information Technology Equipment (Emissions)
    ●  EN55024: Information Technology Equipment (Immunity)
    ●  EN50082-1/EN-61000-6-1: Generic Immunity Standard

    EMC standards

    Cisco ASR 9000 Series Routers are designed to meet:

    ●  FCC Class A
    ●  ICES 003 Class A
    ●  AS/NZS 3548 Class A
    ●  CISPR 22 (EN55022) Class A
    ●  VCCI Class A
    ●  BSMI Class A
    ●  IEC/EN 61000-3-2: Power Line Harmonics
    ●  IEC/EN 61000-3-3: Voltage Fluctuations and Flicker

    Immunity

    Cisco ASR 9000 Series Routers are designed to meet:

    ●  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
    ●  IEC/EN-61000-4-3: Radiated Immunity (10V/m)
    ●  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
    ●  IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
    ●  IEC/EN-61000-4-5: Signal Ports (1kV)
    ●  IEC/EN-61000-4-5: Surge DC Port (1kV)
    ●  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
    ●  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
    ●  IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

    Safety

    Cisco ASR 9000 Series Routers are designed to meet:

    ●  UL/CSA/IEC/EN 60950-1
    ●  IEC/EN 60825 Laser Safety
    ●  ACA TS001
    ●  AS/NZS 60950
    ●  FDA: Code of Federal Regulations Laser Safety

    Weights and Dimensions

    Table 3 shows the different physical dimensions and associated weight of the ASR 9000s modular line cards and modular port adapters.

    Table 3.       Physical Dimensions

    PID

    Physical Dimensions

    Weight

    A9K-MOD80-SE/TR

    14.5 W x 1.72 H x 22.40 L

    14.5 W x 1.72 H x 24.25 L (including ejector levers)

    17.5 lbs. (est.) (7.93 Kg)

    A9K-MOD160-SE/TR

    14.5 W x 1.72 H x 22.4 L

    14.5 W x 1.72 H x 24.25 L (including ejector levers)

    18 lbs. (8.16 Kg)

    A9K-MPA-20x1GE

    6.37 W x 1.36 H x 6.70 L

    6.37 W x 1.36 H x 8.30 L (including Jackscrew)

    34 oz. (0.96 Kg)

    A9K-MPA-2x10GE

    6.37 W x 1.36 H x 6.70 L

    6.37 W x 1.36 H x 8.30 L (including Jackscrew)

    28 oz. (0.7 Kg)

    A9K-MPA-4x10GE

    6.37 W x 1.36 H x 6.70 L

    6.37 W x 1.36 H x 8.30 L (including Jackscrew)

    31 oz. (0.87 Kg)

    A9K-MPA-8x10GE

    6.37 W x 1.36 H x 6.70 L

    6.37 W x 1.36 H x 8.30 L (including Jackscrew)

    1.75 lbs (0.79 Kg)

    A9K-MPA-1x40GE

    6.37 W x 1.36 H x 6.70 L

    6.37 W x 1.36 H x 8.30 L (including Jackscrew)

    26 oz. (est.)(0.7 Kg)

    A9K-MPA-2x40GE

    6.37 W x 1.36 H x 6.70 L

    6.37 W x 1.36 H x 8.30 L (including Jackscrew)

    28 oz. (0.7 Kg)

     

    Additional Information

    SKU A9K-MPA-20X1GE-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/data_sheet_c78-663866.html
    Condition Refresh
    Module Type Ethernet Interface Module

    A9K-MPA-20X1GE-RF

    AED

    AED 0

    0