A9K-RSP440-TR-RF

Double click on above image to view full picture

Zoom Out
Zoom In

A9K-RSP440-TR-RF

Description:

Cisco Refurbished
Original Part No : A9K-RSP440-TR=

ASR9K Route Switch Proc 440G/slot Fabric, 6GB REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 48000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® ASR 9000 Series Route Switch Processor 440 (RSP 440) is a main system processor for Cisco ASR 9000 Series. It supports scalable, low-power, next-generation platforms, as well as required by today’s service provider networks.

    Cisco ASR 9000 Series Routers offer one of the industry’s highest-capacity edge platforms, optimized for aggregation of dense 10 Gigabit Ethernet and 100 Gigabit Ethernet connections.

    In addition to a higher capacity and scale, the Cisco ASR 9000 Series offers:

       Distributed forwarding and control planes for higher performance

       Network virtualization technology to provide excellent resilience and capacity expansion

       Modularized system components in both hardware and software, isolating failure and faults to subsystems and components

       Hardware-based signaling for the fabric, providing industry-leading resilience with zero packet loss on switchover

       Built-in redundancy in hardware components such as the route switch processor (RSP), switch fabric, control-plane chassis control bus, and power supplies, thereby avoiding a single point of failure

       Advanced network timing technologies support for precise frequency and time distribution throughout the network

       Extensive selection of time-division multiplexing (TDM) and Ethernet interfaces for flexible deployment in multiservice edge (MSE) and RAN aggregation environments with packet- and circuit-based transport

    The Cisco ASR 9000 Series operates in a fully distributed fashion, meaning that all packet-forwarding decisions and actions take place on each individual line card. Cisco ASR 9000 Series line cards provide a flexible programming infrastructure with high-density hierarchical quality-of-service (H-QoS) services, security, and integrated Synchronous Ethernet (SyncE). The distributed nature of the Cisco ASR 9000 Series also presents itself in the control plane. The distributed control plane facilitates scale in features such as Bidirectional Forwarding Detection (BFD) and Ethernet operations, administration, and management (EOAM), which improve resilience and provide comprehensive instrumentation.

    Cisco ASR 9000 Series routers bring the time-tested and robust carrier-class capabilities of Cisco IOS® XR Software to the Carrier Ethernet edge. The operating system supports true software process modularity. The capabilities of Cisco IOS XR Software allow each process to run in separate protected memory, including each routing protocol along with multiple instances of control, data, and management planes supported. The software also supports distributed route processing.

    Cisco ASR 9000 Series Route Switch Processor 440 Features and Benefits

    The Cisco ASR 9000 Series RSP 440 is designed to deliver the high scalability, performance, and fast convergence required for today’s and tomorrow’s demanding video, cloud, and mobile services. It provides a superior set of features that deliver unprecedented scale, service flexibility, and high availability:

       Switch fabric architecture:

         Active-active switch fabric architecture that provides scalability and high availability

         Multistage low-latency nonblocking architecture

         Service intelligence and traffic prioritization

       Superior network timing capabilities with support for:

         Centralized Building Integrated Timing Supply (BITS) and DOCSIS® Timing Interface (DTI) timing reference systems

         Precision Time Protocol (PTP), or IEEE 1588-2008, through dedicated 10/100-Mbps Ethernet port

         Bidirectional time of day (ToD) with 10-MHz and 1-pps interfaces

    Route Switch Processor Types

    The Cisco ASR 9000 Route Switch Processor 440 is available in service-edge-optimized and packet-transport-optimized models. The service-edge-optimized version offers a higher amount of memory, which is essential for large-scale comprehensive service deployment. Both versions of the Cisco ASR 9000 Series RSP 440 support service-optimized as well as transport-optimized line cards. Different line cards can be mixed on the same chassis, providing maximum design flexibility.

    Primary features and benefits of the Cisco ASR 9000 Series RSP 440 are listed in Table 1.

    Table 1.       Features and Benefits of the Cisco ASR 9000 Series RSP 440

    Feature

    Benefit

    Highly scalable fabric

      Designed to support high 1-, 10-, and 100-Gbps port densities
      Provides built-in scalability for investment protection

    Dual RSP to provide an active-active switch fabric

      Offers traffic load balancing simultaneously across both fabrics
      Offers highly available system where loss of one RSP allows for unimpeded performance per slot

    Distributed forwarding plane architecture

      Allows line cards to support independent forwarding for enhanced performance and scale

    Control plane extension ports

      Allows the redundant pair of chassis to be combined into a single logical entity to provide advantages in management, scalability, and high availability

    Memoryless switch fabric

      Provides transparent nonblocking low-latency packet forwarding

    Virtual output queuing and arbitration

      Offers service intelligence with prioritization of traffic (unicast and multicast)
      Provides efficient congestion management mechanism and avoids problems related to head-of-line blocking

    Centralized arbiter

      Uses an efficient credit mechanism to help ensure transparent switchover with zero packet loss

    IEEE 1588 support

      Delivers timing services over the packet network efficiently and reliably

    Two independent clock source connections: BITS and Synchronization Supply Unit (SSU) DTI

      Offers redundant, centralized network synchronization support

    Two 16-GB solid state drives (SSDs)

      Allows storing of core dumps and helps reduce the system mean time to repair (MTTR)

    Embedded Universal Series Bus (eUSB) memory port

      Provides access to USB flash memory devices for software image loading and recovery

    Front-panel LEDs

      Provides visual indication of RSP status (active or standby), power management, and activity on compact flash and hard disk drive (HDD)

    Management ports

      Provides easy access to system console

    Table 2 lists all the hardware that ships with the Cisco ASR 9000 Series RSP 440.

    Table 2.       Hardware Available for Cisco ASR 9000 Series Route Switch Processor

    Product Number

    Product Description

    A9K-RSP440-TR and A9K-RSP440-SE

    Route switch processor, bidirectional nonblocking fabric, controller, two 16-GB SSDs; includes the following:

      Switch fabric
       High-capacity full-duplex integrated dual-switch fabric
       220 Gbps/slot with single RSP
       440 Gbps/slot with dual RSP
      Memory internal
       6-GB Error-Correcting Code (ECC)-protected DRAM for A9K-RSP440-TR
       12-GB ECC-protected DRAM for A9K-RSP440-SE
       Solid state disk: two 16-GB SSDs
       8-GB embedded USB
      Memory external
       USB 2.0 Type A receptacle
      Timing system
       Timing: Two independent clock source connections
       IEEE 1588 support: Copper 10/100-Mbps RJ-45 Ethernet port
       GPS
       ToD (RS422 and RS232)
       1-pps RS422 or 1.0/2.3 50-ohm RF connector
       10MHz in/out 1.0/2.3 50-ohm RF connector
      Management
       Two 100/1000 BASE-T (RJ-45) LAN management ports
       One console port
       One auxiliary port
       Two 10-GE Small Form-Factor Pluggable Plus (SFP+) virtualization cluster ports
      Alarms
       Alarm outputs: Critical alarm (CR), major alarm (MJ), and minor alarm (MN)
      LEDs
       Amber alarm cut-off (ACO) and lamp test
       System synchronization alarm (SYNC)
       Compact Flash activity (CF)
       Solid State Drive (SSD)
       Fan tray visual indicator (UFAN/LFAN)

    A9K-RSP440-LT

    Route switch processor, bidirectional nonblocking fabric, controller, one 16-GB SSD, includes the following:

      Switch fabric
       High-capacity full-duplex integrated dual-switch fabric
       90 Gbps/slot with single RSP license upgradeable to 220 Gbps/slot
       180 Gbps/slot with dual RSP license upgradeable to 440 Gbps/slot
      Memory internal
       8 GB ECC-Protected DRAM
       Solid state disk: one 16-GB SSDs
       8-GB embedded USB
      Memory external
       USB 2.0 Type A receptacle
      Timing system
       Timing: Two independent clock source connections
       IEEE 1588 support: Copper 10/100-Mbps RJ-45 Ethernet port
       GPS
       ToD (RS422 and RS232)
       1-pps RS422 or 1.0/2.3 50-ohm RF connector
       10-MHz in/out 1.0/2.3 50-ohm RF connector
      Management
       Two 100/1000 BASE-T (RJ-45) LAN management ports
       One console port
       One auxiliary port
       Two 10-GE Small Form-Factor Pluggable Plus (SFP+) virtualization cluster ports
      Alarms
       Alarm outputs: Critical alarm (CR), major alarm (MJ), and minor alarm (MN)
      LEDs
       Amber alarm cut-off (ACO) and lamp test
       System synchronization alarm (SYNC)
       Compact Flash activity (CF)
       Solid State Drive (SSD)
       Fan tray visual indicator (UFAN/LFAN)

    Software

    The Cisco ASR 9000 Series delivers superior scale, service flexibility, and high availability into access and aggregation networks. It is powered by Cisco IOS XR Software, an innovative self-healing, distributed operating system designed for always-on operation.

    Cisco ASR 9000 Series Carrier Ethernet applications include business services such as Layer 2 VPN (L2VPN) and L3VPN, Internet Protocol television (IPTV), content delivery networks (CDNs), and mobile backhaul transport networks. Features supported include Ethernet Services; L2VPN; IPv4, IPv6, and L3VPN; Layer 2 and Layer 3 Multicast; IP over dense wavelength-division multiplexing (IPoDWDM); SyncE; EOAM and Multiprotocol Label Switching (MPLS) OAM; Layer 2 and Layer 3 access control lists (ACLs); H-QoS; MPLS Traffic Engineering Fast Reroute (MPLS TE-FRR); Multichassis Link Aggregation (MC-LAG); Integrated Routing and Bridging (IRB); Cisco Nonstop Forwarding (NSF) and Nonstop Routing (NSR); Point-to-Multipoint Traffic Engineering (P2MP-TE); Lawful Intercept; Smart Call Home (SCH); and Multi Gigabit Service Control (MGSCP).

    The Cisco ASR 9000 Series multiservice edge (MSE) and Ethernet MSE (E-MSE) capabilities allow enterprises to offer powerful business VPN services with strong service-level agreement (SLA) enforcement. Such services typically require simultaneous scale increases across multiple dimensions, for example, the number of virtual routing and forwarding (VRF) interfaces, IPv4 and IPv6 route scaling, BFD sessions, and instances of Border Gateway Protocol (BGP) Cisco NSR interfaces. A Cisco ASR 9000 Series system configuration requiring high multiple dimensional scale requires the service-edge optimized Cisco ASR 9000 Series RSP model (product number: A9K-RSP440-SE) to support the increased system scale.

    Timing synchronization is an integral part of traditional circuit-based networks, so the availability of equivalent functionality in next-generation Ethernet-based architectures has quickly become a critical requirement. The advanced integrated timing options of the Cisco ASR 9000 Series provide a flexible solution for converging TDM and SDH with next-generation Ethernet-based networks in a single platform. Cisco ASR 9000 Series timing synchronization capabilities and a wide range of transport options provide mobile operators with a simple and cost-effective migration path from second-generation (2G) technologies and TDM transport, to fourth-generation (4G) services and Ethernet-based transport architectures.

    The Cisco ASR 9000 Series has standard-compliant PTPv2, GPS, DTI, and BITS connections on the Cisco ASR 9000 Series RSP 440, as well as SyncE native support on the line cards, giving mobile providers options for time and frequency synchronization. Additionally, the Cisco ASR 9000 Series RSP supplies centralized clocking functions throughout the system, providing consolidated timing distribution and recovery to and from the line cards.

    Additional Information

    SKU A9K-RSP440-TR-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/data_sheet_c78-674143.html
    Condition Refresh
    Module Type Route Processor

    A9K-RSP440-TR-RF

    AED

    AED 0

    0