AIR-PWRINJBLR2T-RF

Double click on above image to view full picture

Zoom Out
Zoom In

AIR-PWRINJBLR2T-RF

Description:

Cisco Refurbished
Original Part No : AIR-PWRINJ-BLR2T=

AIRONET 1300 POWER INJECTOR - LR2T REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 279

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Product Overview

    The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector, as seen in Figure 1, converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector enables total cable runs up to 200 meters (Category 5 Cable + Coax). The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.

    Figure 1

    Power Injector AIR-PWRINJ-BLR2/AIRPWRINJ-BLR2T

     

    The optional Power Injector LR2T takes power from any 12-40 VDC source, not supplied by Cisco. Typically, the DC source is vehicle or solar power source connected as shown in Figure 3. The Power Injector provides for installation flexibility when an AC power source is not available.

    Figure 2

    Network Diagram for Power Injector AIR-PWRINJ-BLR2

     

     

     

    Figure 3

    Network Diagram for Optional Power Injector AIR-PWRINJ-BLR2T

     

    Product Specifications

     

    Table 1   

    Power Injector-LR2

    The Power Injector LR2 converts the standard 10/100 BaseT Ethernet category 5 RJ-45 interface that is suitable for weather-protected areas to a dual F-Type connector interface for dual coaxial cables that are more suitable for harsh outdoor environments. While providing a 100baseT interface to the Cisco Aironet 1300 Series, the Power Injector LR2 also provides power to the unit over the same cables with a power discovery feature that protects other appliances from damage should they accidentally be connected. As an added benefit to the installer, Auto MDIX is built in, allowing the dual cables to be swapped and while maintaining the same functionality. To support longer cable runs from your infrastructure network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable—enabling total cable runs up to 200 meters. Lightning and surge protection is also included at the F-Type connector interface to provide added protection to your network infrastructure devices. The LR2 Power injector requires a Cisco supplied 48V DC source.

    Power Injector-LR2T

    The Power Injector LR2T supports all the functionality of LR2. It is designed for use in transportation applications and operates with an input voltage range of +12 to +40VDC. The DC source is provided by the user. The LR2T can therefore be vehicle or solar powered.

    Power Supply

    Cisco supplied +48 VDC supply for AIR-PWRINJ-BLR2=

    User supplied +12 to +40 VDC source for AIR-PWRINJ_BLR2T=. Requires an external load-dump-module.


     

    Network Management

     

    Table 2  

     AIR-PWRINJ-BLR2AIR-PWRINJ-BLR2T
    Status LEDs

    One LED:

    Power Status

    Configuration and Management

    The power injector does not require configuration or management.


     

    Physical

     

    Table 3  

     AIR-PWRINJ-BLR2AIR-PWRINJ-BLR2T
    Dimensions

    4.62 in x 4.76 in x 1.07 in

    (11.73cm x 12.09cm x 2.71cm)

    4.62 in x 4.76 in x 1.07 in

    (11.73cm x 12.09cm x 2.71cm)

    Weight

    2 lbs.

    (1 kg)

    2 lbs.

    (1 kg)

    Operational Temperature

    -30º to +55ºC (-22º to 131ºF)

    -30º to +55ºC (-22º to 131ºF)

    Storage Temperature

    -40º to +85ºC (-40º to +185ºF)

    -40º to +85ºC (-40º to +185ºF)

    Operational Altitude

    3047 m (10,000 ft.)

    4206 m (13,800 ft.)

    Storage Altitude

    4877 m (16,000 ft.)

    4877 m (16,000 ft.)

    Humidity

    0 to 90% @ 38ºC (non-condensing)

    0 to 90% @ 38ºC (non-condensing)

    Vibration

    SAEJ1455 section 4.9

    SAEJ1455 section 4.9

    Enclosure

    UL2083; Metal case

    UL2083; Metal case


     

    Power

     

    Table 4  

     AIR-PWRINJ-BLR2AIR-PWRINJ-BLR2T
    AC Power

    100 to 240 VAC, +/-10%

    (Cisco supplied power supply)

    Not required

    DC Power

    +48 VDC, +/- 10%

    2 Watts

    +12 to +40 VDC, +/-10%

    2 Watts


     

    Ordering Information

    To place an order, visit the Cisco Ordering Home Page. For assistance in determining the correct wireless access 
    point/bridge to order, contact your local account representative.

    Table 5  

    Product NameProduct Part Number
    Aironet Power Injector—LR2

    AIR-PWRINJ-BLR2=

    Aironet Power Injector—LR2T

    AIR-PWRINJ-BLR2T=

    Power Supply In:100-240VAC Out:48VDC

    AIR-PWR-A=


     

    To Download the Software

    Visit the Cisco Software Center to download Cisco IOS™ Software. Cisco Aironet software can be downloaded atWireless Software.

    Service and Support

    Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, see Cisco Technical Support Services or Cisco Advanced Services.

    For More Information

    For more information about the Cisco Aironet 1300 Series Outdoor Access Point/Bridge, contact your local account representative.

     

    Additional Information

    SKU AIR-PWRINJBLR2T-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008022551d.html
    Condition Refresh
    Module Type Power Injector

    AIR-PWRINJBLR2T-RF

    AED

    AED 0

    0