ASR-9001-RF

Double click on above image to view full picture

Zoom Out
Zoom In

ASR-9001-RF

Description:

Cisco Refurbished
Original Part No : ASR-9001=

ASR 9001 Chassis REMANUFACTURED
AED 75,605

Availability: Out of stock


Not Available

  • Add to Compare
  • Details

    Product Overview

    Part of the Cisco® ASR 9000 Series, the Cisco ASR 9001 Router (Figure 1) is a compact high-capacity Provider Edge (PE) router that delivers 120 Gbps of nonblocking, full-duplex fabric capacity in a two-rack-unit (2RU) form factor. Based on the same Cisco IOS® XR software image as the other routers in the Cisco ASR 9000 Series, the Cisco ASR 9001 Router delivers the features and services found on the ASR 9000 Series platforms, allowing customers to standardize on the same Cisco IOS XR image. The Cisco ASR 9001 Router has an Integrated Route Switch Processor (RSP) and two modular bays that support 1 GE, 10 GE, and 40 GE Modular Port Adapters (MPAs). The base chassis has four integrated 10 GE Enhanced Small Form-Factor Pluggable (SFP+) ports, a GPS input for stratum-1 clocking, Building Integrated Timing Supply (BITS) ports, and management ports.

    Figure 1.      Cisco ASR 9001 Router

    Cisco ASR 9000 Series Aggregation Services Routers deliver exceptional scale, service flexibility, and high availability to Carrier Ethernet transport networks. The routers are powered by Cisco IOS XR Software, an innovative self-healing, distributed operating system designed for always-on operation. This is the same operating system that powers industry-leading routers such as the Cisco CRS Carrier Routing System, bringing the same reliability, scalability, performance, and comprehensive features that have made the Cisco CRS the dominant entity in the service provider core. Cisco IOS XR Software also allows for an end-to-end IP/MPLS solution to service provider requirements based on the same software, thereby reducing the operational complexity of managing multiple operating systems. The Cisco ASR 9000 Series further enhances the IP Next-Generation Network (IP NGN) Carrier Ethernet design for converged, resilient, intelligent, and scalable transport of consumer, business, wholesale, and mobile services.

    Cisco ASR 9000 Series Carrier Ethernet applications include business services such as Layer 2 and Layer 3 VPN (L2VPN and L3VPN), IPTV, Content Delivey Networks (CDNs), mobile backhaul transport networks, and broadband network gateway (BNG). Features supported include Ethernet Services; L2VPN; IPv4, IPv6, and L3VPN; Layer 2 and Layer 3 multicast; IP over dense wavelength-division multiplexing (IPoDWDM), Synchronous Ethernet (SyncE), Ethernet operations, administration, and maintenance (EOAM) and MPLS OAM, Layer 2 and Layer 3 access control lists (ACLs), hierarchical quality of service (HQoS), MPLS Traffic Engineering Fast Reroute (MPLS TE-FRR), Multichassis Link Aggregation (MC-LAG), Integrated Routing and Bridging (IRB) and Cisco Nonstop Forwarding (NSF) and Nonstop Routing (NSR).

    Note:    Site to Site IPSec VPN is not currently supported on the ASR 9001 platform.

    The integrated RSP has 8 GB RAM and is capable of holding serveral millions of routes, which makes the Cisco ASR 9001 Router useful as a dedicated route-reflector appliance.

    Features and benefits of the Cisco ASR 9001 Router are listed in Table 1.

    Table 1.       Features and Benefits of Cisco ASR 9001 Router

    Feature

    Benefit

    Scalable fabric

    Designed to support high 1/10/40 Gigabit densities in a 2RU form factor

    Provides built-in scalability for investment protection

    Integrated port

    Four 10 GE services-enabled SFP+ ports

    Integrated route processor with 8 GB RAM

    Runs Cisco IOS XR, a carrier-class operating system with high memory capacity suitable for a dedicated route-reflector application

    Distributed forwarding plane architecture

    Allows MPA cards to support independent forwarding for enhanced performance and scale

    Control plane extension ports

    Two 10 G out-of-band Ethernet communications ports support Network Virtualization (nV) technology for high-availability cluster applications

    Hardware-based IEEE 1588 support

    Delivers timing services over the packet network efficiently and reliably

    Two independent clock source connections: BITS and Synchronization Supply Unit (SSU) with DOCSIS® Timing Interface (DTI)

    Offers redundant, centralized network synchronization support

    GPS

    Provides option for Stratum-1 clocking

    Embedded USB memory (eUSB) port

    Provides access to USB flash memory devices for software image loading and recovery

    Front-panel LEDs

    Provides visual indication of RSP status (active or standby), power management, and activity on compact flash and hard disk drive (HDD)

    Management ports

    Provides easy access to system console

    Power supply

    Redundant AC or DC power supplies

    Product Specifications

    Table 2 provides details about the Cisco ASR 9001 Router. The system is designed for high performance and high reliability. The Cisco ASR 9001 has an integrated RSP capable of supporting fabric bandwidth up to 120 Gbps.

    Table 2.       Specifications for Cisco ASR 9001 Router

    Category

    Part Number or Specification

     

    Chassis

    ASR 9001

     

    Integrated interfaces

    4 x 10 GE SFP+

     

    Modular port adapters

    20 x 1 GE, 2 x 10 GE, 4 x 10 GE, 1 x 40 GE

     

    Redundancy

    Power supply redundancy

     

    Power supply part number

      A9K-750W-AC
      A9K-750W-DC

     

    Physical specifications

      Height: 3.472 inches (88.2 mm)
      Width: 17.42 inches (442 mm)
      Depth: 18.5 inches (470 mm)
      Weight of chassis: 30.2032 lbs (13.7 kg)
      Weight of chassis with two MPAs: 36.37623 lbs (16.5 kg)

     

    Power inputs

      Worldwide ranging AC (90-265V; 50-60 Hz)
      Worldwide ranging DC (-40V to -72V)

     

    Power consumption

    375 watts typical, 425 watts maximum

     

    Environmental conditions

      Operating temperature: 32 to 104°F (0 to 40°C)
      Storage temperature: -40 to 167°F (-40 to 75°C)
      Relative humidity: 10 to 90%, noncondensing
      Regulatory compliance

     

    Environmental Specifications

     

    Operating temperature (nominal)

    41 to 104ºF (5 to 40ºC)

    Operating temperature
    (short-term)

    23 to 131ºF (-5 to 55ºC)

     

    Operating humidity (nominal) (relative humidity)

    10 to 85%

     

    Operating humidity
    (short-term)

    5 to 90%
    Note: Not to exceed 0.024 kg water or dry air

     

    Storage temperature

    -40 to 158ºF (-40 to 70ºC)

     

    Storage (relative humidity)

    5 to 95%
    Note: Not to exceed 0.024 kg water or dry air

     

    Operating altitude

    -1800m

     

    Air flow

    Side to side

     

    Compliance

     

    Network Equipment Building Standards (NEBS)

    Cisco ASR 9001 is designed to meet:

      SR-3580: NEBS Criteria Levels (Level 3)
      GR-1089-CORE: NEBS EMC and Safety
      GR-63-CORE: NEBS Physical Protection
      VZ.TPR.9205: Verizon TEEER

    ETSI standards

    Cisco ASR 9001 is designed to meet (qualification in progress):

      EN300 386: Telecommunications Network Equipment (EMC)
      ETSI 300 019 Storage Class 1.1
      ETSI 300 019 Transportation Class 2.3
      ETSI 300 019 Stationary Use Class 3.1
      EN55022: Information Technology Equipment (Emissions)
      EN55024: Information Technology Equipment (Immunity)
      EN50082-1/EN-61000-6-1: Generic Immunity Standard

     

    EMC standards

    Cisco ASR 9001 is designed to meet:

      FCC Class A
      ICES 003 Class A
      AS/NZS 3548 Class A
      CISPR 22 (EN55022) Class A
      VCCI Class A
      BSMI Class A
      IEC/EN 61000-3-2: Power Line Harmonics
      IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
      EN 50121-4: Railway EMC

     

    Immunity

    Cisco ASR 9001 is designed to meet:

      IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
      IEC/EN-61000-4-3: Radiated Immunity (10V/m)
      IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
      IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
      IEC/EN-61000-4-5: Signal Ports (1kV)
      IEC/EN-61000-4-5: Surge DC Port (1kV)
      IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
      IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
      IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
      EN 50121-4: Railway EMC

     

    Safety

    Cisco ASR 9001 is designed to meet:

      UL/CSA/IEC/EN 60950-1
      IEC/EN 60825 Laser Safety
      ACA TS001
      AS/NZS 60950
      FDA: Code of Federal Regulations Laser Safety

     

    Ordering Information

    Table 3 provides ordering information for the Cisco ASR 9001 Router.

    Table 3.       Ordering Information

    Product Description

    Supported Software Release

    Part Number

    ASR 9001 Router with 4 x 10 GE

    Cisco IOS XR Software Release 4.2.1 or later

    ASR-9001

    AC Power Entry module

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-750W-AC

    DC Power Entry module

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-750W-DC

    20 x 1 GE Modular Port Adapter

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-MPA-20x1GE

    2 x 10 GE Modular Port Adapter

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-MPA-2x10GE

    4 x 10 GE Modular Port Adapter

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-MPA-4x10GE

    1 x 40 GE Modular Port Adapter

    Cisco IOS XR Software Release 4.2.3 or later

    A9K-MPA-1x40GE

    Additional Information

    SKU ASR-9001-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/asr-9001-router/data_sheet_c78-685687.html
    Condition Refresh
    Router Series 9000 Series
    Chassis Type Modular
    Rack Mountable Yes
    Built In Ports 4
    Port Speed None
    Port Type None

    ASR-9001-RF

    AED

    AED 75,605

    0