ASR-9001-S-RF

Double click on above image to view full picture

Zoom Out
Zoom In

ASR-9001-S-RF

Description:

Cisco Refurbished
Original Part No : ASR-9001-S=

ASR 9001 Chassis with 60G Bandwidth REMANUFACTURED
AED 54,448

Availability: Out of stock


Not Available

  • Add to Compare
  • Details

    Product Overview

    Part of the Cisco® ASR 9000 Series, the Cisco ASR 9001-S Router (Figure 1) is a compact, high-capacity provider edge router that delivers 60 Gbps of nonblocking, full-duplex fabric capacity in a two-rack-unit (2RU) form factor. The Cisco ASR 9001-S router can be upgraded to deliver 120 Gbps capacity by applying an upgrade license. Because it is based on the same Cisco IOS® XR Software image as other routers in the Cisco ASR 9000 Series, the Cisco ASR 9001-S Router delivers the same features and services found on the Cisco ASR 9000 Series platforms, which allows service providers to standardize on the same Cisco IOS XR image. The Cisco ASR 9001-S Router has an Integrated route switch processor (RSP) and two modular bays that support 1, 10, and 40 Gigabit Ethernet modular port adapters (MPAs). The base chassis has four integrated 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) ports, a GPS input for stratum-1 clocking, Building Integrated Timing Supply (BITS) ports, and management ports. Two integrated 10 Gigabit Ethernet SFP+ ports and the Bay 0 slot is enabled by default in the Cisco ASR 9001-S. Another two integrated 10 Gigabit Ethernet SFP+ ports and the Bay 1 slot can be enabled by applying an upgrade license.

    Figure 1.      Cisco ASR 9001-S Router

    Cisco ASR 9000 Series Aggregation Services Routers deliver exceptional scale, service flexibility, and high availability to Carrier Ethernet transport networks. The routers are powered by Cisco IOS XR Software, an innovative self-healing, distributed operating system designed for highly dependable operation. This same operating system powers industry-leading routers such as the Cisco CRS Carrier Routing System, bringing the same reliability, scalability, performance, and comprehensive features that have made the Cisco CRS a leading choice for the service provider core. Cisco IOS XR Software also allows for an end-to-end IP and Multiprotocol Label Switching (MPLS) solution based on the same software, which helps reduce the complexity of managing multiple operating systems. With these features, the Cisco ASR 9000 Series further enhances the IP next-generation network (IP NGN) Carrier Ethernet design for converged, resilient, intelligent, and scalable transport of consumer, business, wholesale, and mobile services.

    Cisco ASR 9000 Series Carrier Ethernet applications include business services, such as Layer 2 and Layer 3 VPN (L2VPN and L3VPN), IPTV, content delivery networks (CDNs), mobile backhaul transport networks, and broadband network gateway (BNG). Features supported include:

       Ethernet Services

       L2VPN

       IPv4, IPv6, and L3VPN

       Layer 2 and Layer 3 multicast

       IP over dense wavelength-division multiplexing (IPoDWDM)

       Synchronous Ethernet (SyncE)

       Ethernet operations, administration, and maintenance (EOAM) and MPLS OAM

       Layer 2 and Layer 3 access control lists (ACLs)

       Hierarchical quality of service (HQoS)

       MPLS traffic engineering fast reroute (MPLS TE-FRR)

       Multichassis link aggregation (MC-LAG)

       Integrated routing and bridging (IRB)

       Cisco Nonstop Forwarding (NSF) and nonstop routing (NSR)

    Note:    Site to Site IPSec VPN is not currently supported on the ASR 9001-S platform.

    The integrated RSP has 8 GB RAM and is capable of holding several millions of routes, which allows the Cisco ASR 9001-S Router to be used as a dedicated route-reflector appliance.

    Features and Benefits

    Features and benefits of the Cisco ASR 9001-S Router are listed in Table 1.

    Table 1.       Features and Benefits of Cisco ASR 9001-S Router

    Feature

    Benefit

    Scalable fabric

    Supports 1, 10, and 40 Gigabit densities in a 2RU form factor

    Provides built-in scalability for investment protection

    Integrated port

    Provides two 10 Gigabit Ethernet services-enabled SFP+ ports

    Integrated route processor with 8 GB RAM

    Runs Cisco IOS XR, a carrier-class operating system with high memory capacity suitable for a dedicated route-reflector application

    Distributed forwarding plane architecture

    Allows MPA cards to support independent forwarding for enhanced performance and scale

    Control plane extension ports

    Includes two 10 Gigabit Ethernet out-of-band communications ports that support network virtualization technology for high-availability cluster applications

    Hardware-based IEEE 1588 support

    Delivers timing services over the packet network efficiently and reliably

    Two independent clock source connections: BITS and synchronization supply unit (SSU) with DOCSIS® Timing Interface (DTI)

    Offers redundant, centralized network synchronization support

    GPS

    Provides option for Stratum-1 clocking

    Embedded USB memory (eUSB) port

    Provides access to USB flash memory devices for software image loading and recovery

    Front-panel LEDs

    Provides visual indication of RSP status (active or standby), power management, and activity on compact flash and hard disk drive (HDD)

    Management ports

    Provides easy access to system console

    Power supply

    Redundant AC or DC power supplies

    Product Specifications

    Table 2 provides product specifications for the Cisco ASR 9001-S Router, which is designed for high performance and high reliability. The Cisco ASR 9001-S has an integrated RSP that can support fabric bandwidth up to 120 Gbps.

    Table 2.       Specifications for Cisco ASR 9001-S Router

    Feature

    Specification

     

    Chassis

    ASR 9001-S

     

    Integrated interfaces

    2 x 10 Gigabit Ethernet SFP+ by default; the remaining 2 x 10 Gigabit Ethernet SFP+ ports can be activated by applying licenses

     

    Modular port adapters

    20 x 1 Gigabit Ethernet, 2 x 10 Gigabit Ethernet, 4 x 10 Gigabit Ethernet, and 1 x 40 Gigabit Ethernet

     

    Redundancy

    Power supply redundancy

     

    Power supply part number

      A9K-750W-AC
      A9K-750W-DC

     

    Physical specifications

      Height: 3.472 in. (88.2 mm)
      Width: 17.42 in. (442 mm)
      Depth: 18.5 in. (470 mm)
      Weight of chassis: 30.2032 lbs (13.7 kg)
      Weight of chassis with two MPAs: 36.37623 lbs (16.5 kg)

     

    Power inputs

      Worldwide ranging AC (90-265V; 50-60 Hz)
      Worldwide ranging DC (-40V to -72V)

     

    Power consumption

    375 W typical, 425 W maximum

     

    Environmental conditions

      Operating temperature: 32 to 104°F (0 to 40°C)
      Storage temperature: -40 to 167°F (-40 to 75°C)
      Relative humidity: 10 to 90%, noncondensing
      Regulatory compliance

     

    Environmental Specifications

     

    Operating temperature (nominal)

    41 to 104ºF (5 to 40ºC)

    Operating temperature
    (short-term)

    23 to 131ºF (-5 to 55ºC)

     

    Operating humidity (nominal) (relative humidity)

    10 to 85%

     

    Operating humidity
    (short-term)

    5 to 90%
    Note: Not to exceed 0.024 kg water or dry air

     

    Storage temperature

    -40 to 158ºF (-40 to 70ºC)

     

    Storage (relative humidity)

    5 to 95%
    Note: Not to exceed 0.024 kg water or dry air

     

    Operating altitude

    -1800m

     

    Air flow

    Side to side

     

    Compliance

     

    Network Equipment Building Standards (NEBS)

    Cisco ASR 9001-S is designed to meet:

      SR-3580: NEBS Criteria Levels (Level 3)
      GR-1089-CORE: NEBS EMC and Safety
      GR-63-CORE: NEBS Physical Protection
      VZ.TPR.9205: Verizon TEEER

    ETSI standards

    Cisco ASR 9001-S is designed to meet (qualification in progress):

      EN300 386: Telecommunications Network Equipment (EMC)
      ETSI 300 019 Storage Class 1.1
      ETSI 300 019 Transportation Class 2.3
      ETSI 300 019 Stationary Use Class 3.1
      EN55022: Information Technology Equipment (Emissions)
      EN55024: Information Technology Equipment (Immunity)
      EN50082-1/EN-61000-6-1: Generic Immunity Standard

     

    EMC standards

    Cisco ASR 9001-S is designed to meet:

      FCC Class A
      ICES 003 Class A
      AS/NZS 3548 Class A
      CISPR 22 (EN55022) Class A
      VCCI Class A
      BSMI Class A
      IEC/EN 61000-3-2: Power Line Harmonics
      IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
      EN 50121-4: Railway EMC

     

    Immunity

    Cisco ASR 9001-S is designed to meet:

      IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
      IEC/EN-61000-4-3: Radiated Immunity (10V/m)
      IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
      IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
      IEC/EN-61000-4-5: Signal Ports (1kV)
      IEC/EN-61000-4-5: Surge DC Port (1kV)
      IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
      IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
      IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
      EN 50121-4: Railway EMC

     

    Safety

    Cisco ASR 9001-S is designed to meet:

      UL/CSA/IEC/EN 60950-1
      IEC/EN 60825 Laser Safety
      ACA TS001
      AS/NZS 60950
      FDA: Code of Federal Regulations Laser Safety

     

    Ordering Information

    To place an order, visit the Cisco Ordering homepage. Table 3 provides ordering information for the Cisco ASR 9001-S Router.

    Table 3.       Ordering Information

    Product Description

    Supported Software Release

    Part Number

    ASR 9001-S Router with 2 x 10 GE

    Cisco IOS XR Software Release 4.3.1 or later

    ASR-9001-S

    AC Power Entry module

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-750W-AC

    DC Power Entry module

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-750W-DC

    20 x 1 GE Modular Port Adapter

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-MPA-20x1GE

    2 x 10 GE Modular Port Adapter

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-MPA-2x10GE

    4 x 10 GE Modular Port Adapter

    Cisco IOS XR Software Release 4.2.1 or later

    A9K-MPA-4x10GE

    1 x 40 GE Modular Port Adapter

    Cisco IOS XR Software Release 4.2.3 or later

    A9K-MPA-1x40GE

    Upgrade license for 120G Bandwidth

    Cisco IOS XR Software Release 4.3.1 or later

    A9K-9001-120G-LIC

    For More Information

    For more information about Cisco Services, contact your local Cisco account representative or visit http://www.cisco.com/go/spservices.

     

     

     

    Additional Information

    SKU ASR-9001-S-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/887-integrated-services-router-isr/data_sheet_c78_459542.html
    Condition Refresh
    Router Series 9000 Series
    Chassis Type Modular
    Rack Mountable Yes
    Built In Ports 4
    Port Speed None
    Port Type None

    ASR-9001-S-RF

    AED

    AED 54,448

    0