ASR-9922-RP-SE-RF

Double click on above image to view full picture

Zoom Out
Zoom In

ASR-9922-RP-SE-RF

Description:

Cisco Refurbished
Original Part No : ASR-9922-RP-SE=

ASR 9922 Route Processor 12GB for ServiceEdge REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 50000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® ASR 9900 Route Processor - Figure 1 - is the first generation of system processors available for the Cisco ASR 9912 Router and ASR 9922 Router chassis. The Cisco ASR 9900 Route Processor is designed with a system architecture to accommodate convergence of Layer 2 and Layer 3 services as required by today’s service providers in wireline, data center interconnect (DCI), and Radio Access Network (RAN) aggregation applications.

    The Cisco ASR 9900 Route Processor brings the time-tested and robust carrier-class capabilities of Cisco IOS® XR Software to the Carrier Ethernet edge. The operating system supports true software process modularity. The capabilities of Cisco IOS XR Software allow each process to run in separate protected memory, including each routing protocol along with multiple instances of control, data, and management planes supported. The software also supports distributed route processing.

    Figure 1.      Cisco ASR 9900 Route Processor

    The Cisco ASR 9900 Route Processor is designed to deliver the high scalability, performance, and fast convergence required for today’s and tomorrow’s demanding video, cloud, and mobile services. These features provide unprecedented scale, service flexibility, and high availability:

       Switch fabric architecture along with Cisco ASR 9900 Fabric Cards:

         Distributed switch fabric architecture

         Control of up to seven Cisco ASR 9900 Switch Fabric Cards to provide scalability and high availability on Cisco ASR 9922 Router and ASR 9912 Router chassis

         Multistage low-latency non-blocking architecture

         Service intelligence and traffic prioritization

       Superior network timing capabilities with support for:

         Centralized Building Integrated Timing Supply (BITS) and DOCSIS® Timing Interface (DTI) timing reference systems

         Precision Time Protocol (PTP), or IEEE 1588-2008, through dedicated 10/100-Mbps Ethernet port

         Bidirectional time of day (ToD) with 10MHz and 1-pps interfaces

    Route Processor Types

    The Cisco ASR 9900 Route Processor is available in service-edge-optimized and packet-transport-optimized models. The service-edge-optimized version offers a higher amount of memory essential for large-scale comprehensive service deployment. Both versions of the route processor support service-optimized as well as transport-optimized line cards. Different line cards can be mixed on the same chassis, providing maximum design flexibility.

    Features and benefits of the Cisco ASR 9900 Route Processor are listed in Table 1.

    Table 1.       Features and Benefits of Cisco ASR 9900 Route Processor

    Feature

    Benefit

    Highly scalable fabric

      Designed to support high 1/10/100-Gbps port densities
      Provides built-in scalability for investment protection

    Control of up to seven switch fabric cards

    Offers traffic load balancing simultaneously across up to seven fabrics

    Distributed forwarding plane architecture

    Allows line cards to support independent forwarding for enhanced performance and scale

    Control plane extension ports

    Combining the redundant pair of chassis into a single logical entity provides advantages in management, scalability, and high availability.

    Memoryless switch fabric

    Provides transparent nonblocking low-latency packet forwarding

    Virtual output queuing and arbitration

      Offers service intelligence with prioritization of traffic (unicast and multicast)
      Provides efficient congestion management mechanism and avoids problems related to head-of-line blocking

    Centralized arbiter

    Uses an efficient credit mechanism to help ensure transparent switchover with zero packet loss

    IEEE 1588 support

    Delivers timing services over the packet network efficiently and reliably

    Two independent clock source connections: BITS and Synchronization Supply Unit (SSU) DTI

    Offers redundant, centralized network synchronization support

    Two 16-GB solid state drives (SSDs)

    Allows storing of core dumps and helps reduce the system mean time to repair (MTTR)

    Embedded Universal Series Bus (eUSB) memory port

    Provides access to on board USB flash memory devices for software image storing and upgrades

    Front-pane external Universal Serial Bus (USB) 2.0 port

    Provides access to USB flash memory devices for quick software image loading and recovery

    Front-panel LEDs

    Provides visual indication of route processor status (active or standby), power management, and activity on compact flash and hard disk drive (HDD)

    Management ports

    Provides easy access to system console

    Table 2 lists all the hardware that ships with the Cisco ASR 9900 Route Processor.

    Table 2.       Cisco ASR 9900 Route Processor Hardware

    Product Number

    Product Description

    ASR-9900-RP-TR
    and
    ASR-9900-RP-SE

    Route processor, bidirectional nonblocking fabric, controller, two 16-GB SSDs; includes the following:

      Control of up to seven Cisco ASR 9900 switch fabric cards
      Memory internal
       6-GB Error-Correcting Code (ECC)-protected DRAM for ASR-9900-RP-TR
       12-GB ECC-protected DRAM for ASR-9900-RP-SE
       Solid state disk: two 16-GB SSDs
       8-GB embedded USB
      Memory external
       USB 2.0 Type A receptacle
      Timing system
       Timing: Two independent clock source connections
       IEEE 1588 support: Copper 10/100-Mbps RJ-45 Ethernet port
       GPS
        ToD (RS422 and RS232)
        1-pps RS422 or 1.0/2.3 50-ohm RF connector
        10MHz in/out 1.0/2.3 50-ohm RF connector
      Management
       Two 100/1000 BASE-T (RJ-45) LAN management ports
       One console port
       One auxiliary port
       Two 10-GE Small Form-Factor Pluggable Plus (SFP+) virtualization cluster ports
      Alarms
       Alarm outputs: Critical alarm (CR), major alarm (MJ), and minor alarm (MN)
      LEDs
       Amber alarm cut-off (ACO) and lamp test
       System synchronization alarm (SYNC)
       Compact Flash activity (CF)
       Solid State Drive (SSD)
       Fan tray visual indicator (UFAN/LFAN)

    Software

    The Cisco ASR 9000 Series Aggregation Services Routers delivers superior scale, service flexibility, and high availability into access and aggregation networks. It is powered by Cisco IOS XR Software - an innovative self-healing, distributed operating system designed for always-on operation. Cisco IOS XR Software supports software maintenance update (SMU) capability which allows bug fixing or even small feature releasing without interrupting existing services. Software also supports Field Programmable Device (FPD) upgrades which can be used to update field programmable gate arrays (FPGAs), (ROM monitor) ROMmon, etc., while systems are running.

    Cisco ASR 9000 Series Carrier Ethernet applications include business services such as Layer 2 VPN (L2VPN) and Layer 3 VPN (L3VPN), Internet Protocol Television (IPTV), Content Delivery Networks (CDNs), and mobile backhaul transport networks. Features supported include Ethernet Services; L2VPN; IPv4, IPv6, and L3VPN; Layer 2 and Layer 3 Multicast; IP over dense wavelength-division multiplexing (IPoDWDM); SyncE; EOAM and Multiprotocol Label Switching (MPLS) OAM; Layer 2 and Layer 3 access control lists (ACLs); H-QoS; MPLS Traffic Engineering Fast Reroute (MPLS TE-FRR); Multichassis Link Aggregation (MC-LAG); Integrated Routing and Bridging (IRB); Cisco Nonstop Forwarding (NSF) and Nonstop Routing (NSR); Point-to-Multipoint Traffic Engineering (P2MP-TE); Lawful Intercept; Smart Call Home (SCH); and Multi Gigabit Service Control (MGSCP).

    The Cisco ASR 9000 Series Multiservice Edge (MSE) and Ethernet MSE (E-MSE) capabilities allow enterprises to offer powerful business VPN services with strong service-level agreement (SLA) enforcement. Such services typically require simultaneous scale increases across multiple dimensions; for example, the number of Virtual Route Forwarding (VRF) interfaces, IPv4 and IPv6 route scaling, BFD sessions, and instances of Border Gateway Protocol (BGP) Cisco NSR interfaces. A Cisco ASR 9900 system configuration requiring high multiple dimensional scale requires the service-edge optimized A9K-RP-SE model to support the increased system scale.

    Timing synchronization is an integral part of traditional circuit-based networks, so the availability of equivalent functionality in next-generation Ethernet-based architectures has quickly become a critical requirement. The Cisco ASR 9900 chassis have standard compliant PTPv2, GPS, DTI, and BITS connections on the route processor, and SyncE support natively on the line cards, giving mobile providers ample options for time and frequency synchronization. Additionally, the Cisco ASR 9900 Route Processor supplies centralized clocking functions throughout the system, providing consolidated timing distribution and recovery to and from the line cards.

    Additional Information

    SKU ASR-9922-RP-SE-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/datasheet-c78-733377.html
    Condition Refresh
    Module Type Route Processor

    ASR-9922-RP-SE-RF

    AED

    AED 0

    0