ASR1000-RP1-RF

Double click on above image to view full picture

Zoom Out
Zoom In

ASR1000-RP1-RF

Description:

Cisco Refurbished
Original Part No : ASR1000-RP1=

ASR1000 Route Processor 1, 4GB DRAM, Spare REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 15000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Product Overview

    The Cisco® ASR 1000 Series Embedded Services Processors (ESPs) handle all the network data-plane traffic-processing tasks of Cisco ASR 1000 Series Aggregation Services Routers. These ESPs allow the activation of concurrent enhanced network services, such as cryptography, firewall, Network Address Translation (NAT), quality of service (QoS), NetFlow, and many others while maintaining line speeds. Figure 1 shows the Cisco ASR 1000 Series ESP 100 and ESP 200.

    Cisco ASR 1000 Series Routers are placed at the WAN edge of your enterprise data center or large office, as well as in service provider points of presence (POPs). The routers rely on the power of the ESPs to aggregate multiple traffic flows and network services, including encryption and traffic management, and forward them across WAN connections at line speeds. With router options that run from 2.5 to 200 Gbps, the Cisco ASR Family contains many models and licensing options to meet the speed and budget requirements of different types of organizations and various-sized locations.

    The Cisco ASR 1000 ESP components of these routers accelerate service delivery using parallel processing. The ESPs are based on the Cisco QuantumFlow Processor (QFP) for next-generation forwarding and queuing in silicon. They operate at 2.5-, 5-, 10-, 10-N-, 20-, 40-, 100-, and 200-Gbps data-plane forwarding throughput rates. Together, the Cisco ASR 1001-X and ASR 1002-X Routers and 100- and 200-Gbps ESPs introduce the second generation of the Cisco QFP hardware and software architecture. With QFP-based ESPs at their core, ASR 1000 Routers accomplish the following:

    ●   Handle all baseline packet routing operations, including MAC address classification, Layer 2 and Layer 3 forwarding, QoS classification, and NetFlow packet accounting

    ●   Perform advanced services such as IP Security (IPsec) encryption, Network Address Translation (NAT), firewall, AppNav, Cisco Application Visibility and Control (AVC), Performance Routing (PfR), and Locator ID Separation Protocol (LISP); they offer diverse feature Layer 2 connectivity options such as Ethernet over MPLS (EoMPLS), Virtual Private LAN Services (VPLS), Overlay Transport Virtualization (OTV), and Virtual Extensible LAN Services (VXLAN)

    Platform Overview

    The following embedded services processors are supported on the Cisco ASR 1000 Series Routers:

    ●   Cisco ASR 1000 Series 5-Gbps Embedded Services Processor

    ●   Cisco ASR 1000 Series 10-Gbps Embedded Services Processor

    ●   Cisco ASR 1000 Series 10-Gbps Embedded Services Processor Non Crypto

    ●   Cisco ASR 1000 Series 20-Gbps Embedded Services Processor

    ●   Cisco ASR 1000 Series 40-Gbps Embedded Services Processor

    ●   Cisco ASR 1000 Series 100-Gbps Embedded Services Processor

    ●   Cisco ASR 1000 Series 200-Gbps Embedded Services Processor

    Figure 1.      Cisco ASR 1000 Series ESP 100 and ESP 200

     

    Features and Benefits

    The main engine of the ESP is the Cisco QFP, the industry’s first programmable and application-aware network processor. The Cisco QFP forms the overall hardware and software architecture of the ESP. It consolidates up to 256 customized packet-processor cores (900 MHz to 1.5 GHz) into a single processor. The parallel processing capability eliminates the need for additional service blades inside the router, because all processing is performed on the QFP. As a result, the ESPs enable the ASR 1000s to support the following functions and features with high performance:

    ●   Forwarding, traffic management, and services

    ●   Large-scale parallel processing with centralized shared memory to achieve low-latency packet processing

    ●   High-performance deep-packet inspection (DPI) with full visibility into the entire Layer 2 frame, including payload

    ●   Rapid feature development with ANSI-C software development framework

    ●   Up to 200-Gbps system throughput and up to 130 millions of packets per second (mpps) to address WAN aggregation needs

    ●   Hardware-assisted cryptographic performance to yield up to 78 Gbps of throughput to enable secure WAN access and compliance

    ●   Line-speed zone-based firewall that provides up to 200 Gbps of throughput and 6-mpps firewall sessions

    ●   DPI, Cisco IOS® Software Zone-Based Firewall distributed denial of service (DDoS) detection and prevention, and control-plane protection

    ●   Cisco Session Border Control (SBC) for terminating and interconnecting media terminations with full accounting and flow control

    ●   Cisco Multicast Visual Quality Experience (VQE) and video Call Admission Control (CAC) for enhanced user experiences

    ●   Hardware-accelerated traffic classification and traffic shaping with support for up to 464,000 queues

    ●   Flexible traffic prioritization and efficient WAN bandwidth use with minimum, maximum, and excess bandwidth allocation with priority propagation

    Use Cases

    The ESPs address the following applications and use cases:

    ●   Service provider broadband: The Cisco ASR 1000 Series Router serves as a broadband aggregation router that terminates up to 64,000 subscriber sessions. It supports features such as SBC for voice over IP (VoIP) and video services (including Cisco TelePresence® communications systems) and hardware-assisted per-user firewall for security.

    ●   Service provider-managed customer premises equipment (CPE): The Cisco ASR 1000 Router serves as a WAN aggregation router with high-density Gigabit Ethernet or WAN link aggregation and 10 Gigabit Ethernet uplink capabilities. Key benefits are Layer 2 and Layer 3 VPN functions and line-rate IP Multicast support for triple-play (data, voice, and video) deployments.

    ●   Multimedia provider edge (PE): The Cisco ASR 1000 Series Router interfaces with enterprise and service provider-provisioned voice and multimedia services directly at the edge. You do not need an overlay network, network appliances, or service blades, lowering operating expenses (OpEx) and offering flexible deployment models. This router supports protected signaling for both voice and video services and facilitates 32,000 voice calls concurrent with up to 200 Gbps of data traffic with accounting, firewall, and call-quality features enabled.

    ●   Enterprise WAN aggregation: At the WAN aggregation headend, the Cisco ASR 1000 Router facilitates a branch-office architecture that offers excellent investment protection with services and scale. Solution benefits consist of a multigigabit encryption rate (up to 78-Gbps IPsec cryptography throughput) and optimization of the WAN to route around brownouts in the service provider network to guarantee mission-critical applications.

    ●   Enterprise Internet gateway: As an Internet gateway, the ASR 1000 delivers multigigabit Cisco IOS Firewall capability without the need for service blades. All firewall processing occurs in silicon 2.5-, 5-, 10-, 20-, 40-, 100-, or 200-Gbps speeds. In addition, the router provides high-speed logging through Sampled NetFlow Version 9 and ongoing forwarding with baseline and firewall features enabled.

    ●   Enterprise Intelligent WAN (IWAN): The scalable Cisco ASR 1000 Router smoothly enables the intelligent WAN architecture that allows enterprises to reduce expensive WAN costs by adopting business-class Internet as a transport while maintaining privacy, confidentiality with crypto, and regulatory compliance with a zone-based firewall.

    ●   Enterprise Data Center Interconnect (DCI): The scalable Cisco ASR 1000 Router securely enables the interconnection of data centers to the cloud to consume services and migrate work loads to provide disaster recovery and normal data center management operations.

    Platform Support and Compatibility

    To benefit from feature-rich services of Cisco ASR 1000 Routers, Cisco IOS XE Software Release 2.4 or later is required. For the newly added Cisco ASR 1001-X Router, Cisco IOS XE Software Release 3.12 or later is required. For ESP data-plane throughput compatibilities by ASR platform, refer to Tables 1 through 9.

    Table 1.       Cisco ASR 1000 Series Integrated ESP in Cisco ASR 1001 Chassis Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1001 Router Chassis (ESP integrated; upgradable from 2.5-Gbps to 5-Gbps via software activated license)

    ASR1001

    Cisco ASR 1001 Router Chassis (ESP integrated; upgradable from 2.5-Gbps to 5-Gbps via software activated license to 5-Gbps) with integrated daughter card with two OC3 POS ports

    ASR1001-2XOC3POS

    Cisco ASR 1001 Router Chassis (ESP integrated; upgradable from 2.5-Gbps to 5-Gbps via software activated license to 5-Gbps) with integrated daughter card with four 1GE ports

    ASR1001-4X1GE

    Table 2.       Cisco ASR 1000 Series Integrated ESP in Cisco ASR 1001-X Chassis Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1001-X Router Chassis (ESP integrated; upgradable from 2.5-Gbps to 20-Gbps via software activated license)

    ASR1001-X

    Table 3.       Cisco ASR 1000 Series Integrated ESP in Cisco ASR 1002-X Chassis Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1002-X Router Chassis (ESP integrated; upgradable from 5-Gbps to 36-Gbps via software activated license)

    ASR1002-X

    Table 4.       Cisco ASR 1000 Series 5-Gbps ESP (ASR1000-ESP5) Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1002 Router Chassis

    ASR1002

    Table 5.       Cisco ASR 1000 Series 10- and 10-N-Gbps ESP (ASR1000-ESP10 and ASR1000-ESP10-N, respectively) Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1002 Router Chassis

    ASR1002

    Cisco ASR 1004 Router Chassis

    ASR1004

    Cisco ASR 1006 Router Chassis*

    ASR1006

    Cisco ASR 1000 Route Processor 1, 4GB DRAM

    ASR1000-RP1

    Cisco ASR 1000 Route Processor 2, 8GB DRAM

    ASR1000-RP2

    Cisco ASR 1000 SPA Interface Processor 10

    ASR1000-SIP10

    * Supports 1 + 1 redundancy when configured with two 10-Gbps Cisco ASR 1000 ESP modules.

    Table 6.       Cisco ASR 1000 Series 20-Gbps ESP (ASR1000-ESP20) Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1004 Router Chassis

    ASR1004

    Cisco ASR 1006 Router Chassis*

    ASR1006

    Cisco ASR 1000 Route Processor 1, 4GB DRAM

    ASR1000-RP1

    Cisco ASR 1000 Route Processor 2, 8GB DRAM

    ASR1000-RP2

    Cisco ASR 1000 SPA Interface Processor 10

    ASR1000-SIP10

    * Supports 1 + 1 redundancy when configured with two 20-Gbps Cisco ASR 1000 ESP modules.

    Table 7.       Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1004 Router Chassis*

    ASR1004

    Cisco ASR 1006 Router Chassis*

    ASR1006

    Cisco ASR 1006-X Router Chassis*

    ASR1006-X

    Cisco ASR 1009-X Router Chassis*

    ASR1009-X

    Cisco ASR 1013 Router Chassis*

    ASR1013

    Cisco ASR 1000 Route Processor 2, 8GB DRAM

    ASR1000-RP2

    Cisco ASR 1000 SPA Interface Processor 10

    ASR1000-SIP10

    Cisco ASR 1000 SPA Interface Processor 40

    ASR1000-SIP40

    Cisco ASR 1000 Fixed Ethernet Line Card, 6x10GE

    ASR1000-6TGE

    Cisco ASR 1000 Fixed Ethernet Line Card, 2x10GE + 20x1GE

    ASR1000-2T + 20X1GE

    * Supports 1 + 1 redundancy when configured with two 40-Gbps Cisco ASR 1000 ESP modules.

    Table 8.       Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1006 Router Chassis*

    ASR1006

    Cisco ASR 1006-X Router Chassis*

    ASR1006-X

    Cisco ASR 1009-X Router Chassis*

    ASR1009-X

    Cisco ASR 1013 Router Chassis*

    ASR1013

    Cisco ASR 1000 Route Processor 2, 8GB DRAM

    ASR1000-RP2

    Cisco ASR 1000 SPA Interface Processor 10

    ASR1000-SIP10

    Cisco ASR 1000 SPA Interface Processor 40

    ASR1000-SIP40

    Cisco ASR 1000 Fixed Ethernet Line Card, 6x10GE

    ASR1000-6TGE

    Cisco ASR 1000 Fixed Ethernet Line Card, 2x10GE + 20x1GE

    ASR1000-2T+20X1GE

    Cisco ASR 1000 Ethernet Line Card, 100G Modular Interface Processor

    ASR1000-MIP100

    Cisco ASR 1000 1x100GE Ethernet Port Adapter

    EPA-1X100GE

    Cisco ASR1000 1600w AC Power Supply

    ASR1013/06-PWR-AC

    Cisco ASR1000 1600w DC Power Supply

    ASR1013/06-PWR-DC

    * Supports 1 + 1 redundancy when configured with two 100-Gbps Cisco ASR 1000 ESP modules.

    Table 9.       Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) Compatible Hardware

    Product Name

    Part Number

    Cisco ASR 1009-X Router Chassis*

    ASR1009-X

    Cisco ASR 1013 Router Chassis*

    ASR1013

    Cisco ASR 1000 Route Processor 2, 8GB DRAM

    ASR1000-RP2

    Cisco ASR 1000 SPA Interface Processor 40

    ASR1000-SIP40

    Cisco ASR 1000 Fixed Ethernet Line Card, 6x10GE

    ASR1000-6TGE

    Cisco ASR 1000 Fixed Ethernet Line Card, 2x10GE + 20x1GE

    ASR1000-2T+20X1GE

    Cisco ASR 1000 Ethernet Line Card, 100G Modular Interface Processor

    ASR1000-MIP100

    Cisco ASR 1000 1x100GE Ethernet Port Adapter

    EPA-1X100GE

    Cisco ASR1000 1600w AC Power Supply

    ASR1013/06-PWR-AC

    Cisco ASR1000 1600w DC Power Supply

    ASR1013/06-PWR-DC

    * Supports 1 + 1 redundancy when configured with two 200-Gbps Cisco ASR 1000 ESP modules.

    Product Specifications

    Tables 10 and 11 list specifications of the integrated ESP modules in the Cisco ASR 1001 and ASR 1002-F chassis, respectively. Table 12 lists the specifications of the Cisco ASR 1000 Series 5-, 10-, 10-N-, 20-, 40-, and 100-Gbps ESP modules, and Table 13 lists the specifications of the integrated ESP modules in the Cisco ASR 1002-X.

    Table 10.     Specifications of Integrated ESP Module in Cisco ASR 1001 Chassis

    Feature

    Specification

     

    Product compatibility

    The ESP module is integrated in the Cisco ASR 1001 chassis.

     

    Software compatibility

    Cisco IOS XE Software Release 3.2.S or later is required (minimum software release for the integrated ESP module in the Cisco ASR 1001 chassis).

     

    Protocols

    Refer to Cisco IOS XE Software Release 3.2S (or later) protocol support.

     

    Connectivity

    Refer to Cisco ASR 1000 Series SPA Interface Processor (SIP) data sheet for shared-port-adapter (SPA) support. The SIP is integrated in the Cisco ASR 1001 chassis

     

    Memory

    256-MB Cisco QFP Resource Memory, 5-Mb ternary content addressable memory (TCAM), and 64-MB packet buffet memory; the integrated ESP shares the same control memory on the route processor

     

    Reliability and availability

    Software redundancy support: Yes

    Hardware redundancy support: No

    Support for online insertion and removal (OIR)

    Support for Nonstop Forwarding (NSF) and Stateful Switchover (SSO)

     

    MIBs

    RFC 2737 compliant

     

    Network management

    Network management through Cisco ASR 1000 Series Route Processor:

    ●  Telnet (command-line interface [CLI])
    ●  Console port (through the CLI)
    ●  Simple Network Management Protocol (SNMP) (RFC 2665)

     

    Status LED descriptions

    No

    LED Label

    LED

    Color-State

    Behavior Description

    -

    PWR

    Power

    Solid green

    All power rails are within specifications

    Off

    Off, the route is in standby mode

    -

    STAT

    System status

    Solid green

    Cisco IOS Software has successfully booted

    -

    -

    -

    Yellow

    BOOT ROMmon has successfully loaded

    Red

    System failure; on power up, turned off by software

    -

    ACTV

    Activity

    Green

    Lit when this is the active route processor

    -

    STBY

    Standby

    Yellow

    Lit when this is the standby route processor

    Physical dimensions
    (H x W x D)

    Not applicable: The ESP module is integrated in the Cisco ASR 1001 chassis.

     

    Power

    Not applicable: The ESP module is integrated in the Cisco ASR 1001 chassis.

     

    Approvals and compliance

    Same as for Cisco ASR 1001 chassis because the ESP module is integrated in the chassis

     

    Environmental

    Same as for Cisco ASR 1001 chassis because the ESP module is integrated in the chassis

     

                 

    Table 11.     Specifications of Integrated ESP Module in Cisco ASR 1001-X Chassis

    Feature

    Specification

    Product compatibility

    The ESP module is integrated in the Cisco ASR 1001-X chassis.

    Software compatibility

    Cisco IOS XE Software Release 3.12.0S or later

    Protocols

    Refer to Cisco IOS XE Software Release 3.12.0S (or later) protocol support.

    Connectivity

    Refer to Cisco ASR 1000 Series SIP data sheet for SPA support. The SIP is integrated in the Cisco ASR 1001-X chassis.

    Memory

    4-GB shared Cisco QFP Resource Memory, 10-Mb TCAM; the integrated ESP shares the same control memory on the route processor

    Reliability and availability

    Software redundancy support: Yes

    Hardware redundancy support: No

    Support for OIR

    Support for NSF and SSO

    MIBs

    RFC 2737 compliant

    Network management

    Network management through Cisco ASR 1000 Series Route Processor:

    ●  Telnet (CLI)
    ●  Console port (through the CLI)
    ●  SNMP (RFC 2665)

    Status LED descriptions

    LED Label

    LED

    Color-State

    Behavior Description

    PWR

    Power

    Solid green

    All power rails are within specifications

    Off

    Off, the route is in standby mode

    STAT

    System status

    Solid green

    Cisco IOS Software has successfully booted

     

     

    Yellow

    BOOT ROMmon has successfully loaded

     

     

    Red

    System failure; on power up, turned off by software

    Physical dimensions
    (H x W x D)

    Not applicable: The ESP module is integrated in the Cisco ASR 1001-X chassis.

    Power

    Not applicable: The ESP module is integrated in the Cisco ASR 1001-X chassis.

    Approvals and compliance

    Same as for other ESP modules

    Environmental

    Same as for other ESP modules

    Table 12.     Specifications of Cisco ASR 1000 Series 5-, 10-, 10-N-, 20-, 40-, 100-, and 200-Gbps ESP Modules

    Feature

    Specification

    Product compatibility

    For 2.5- and 5-Gbps integrated Cisco ASR 1000 ESP: Cisco ASR 1001 Router chassis only

    For 5-Gbps Cisco ASR 1000 ESP: Cisco ASR 1002 Router chassis only

    For 10-Gbps Cisco ASR 1000 ESP: Cisco ASR 1002, ASR 1004, and ASR 1006 Router chassis

    For 10-N-Gbps Cisco ASR 1000 ESP: Cisco ASR 1002, ASR 1004, and ASR 1006 Router chassis

    For 20-Gbps Cisco ASR 1000 ESP: Cisco ASR 1004 and ASR 1006 Router chassis

    For 40-Gbps Cisco ASR 1000 ESP: Cisco ASR 1004, ASR 1006, ASR 1006-X, ASR 1009-X and ASR 1013 Router chassis

    For 100-Gbps Cisco ASR 1000 ESP: Cisco ASR 1006, ASR 1006-X, ASR 1009-X and ASR 1013 Router chassis; requires the Cisco ASR 1000 1600W AC or DC Power Supply (ASR1013/06-PWR-AC or ASR1013/06-PWR-DC, respectively)

    For 200-Gbps Cisco ASR 1000 ESP: ASR 1009-X Cisco ASR 1013 Router chassis only

    Software compatibility

    Cisco IOS XE Software Release 2.1 (minimum software release for 5- and 10-Gbps ESPs)

    Cisco IOS XE Software Release 2.2 or later (minimum software release for 20-Gbps ESP)

    Cisco IOS XE Software Release 3.1.0S or later (minimum software release for 40-Mbps ESP)

    Cisco IOS XE Software Release 3.2.0S or later (minimum) software release for 40-Gbps ESP support on

    Cisco ASR 1004

    Cisco IOS XE Software Release 3.2.0S or later (minimum software release for 2.5- and 5-Gbps integrated ESP support on Cisco ASR 1001)

    Cisco IOS XE Software Release 3.7.1S or later (minimum) software release for 100-Gbps ESP support

    Cisco IOS XE Software Release 3.10.0S or later (minimum) software release for 200-Gbps ESP support

    Protocols

    Refer to Cisco IOS XE Software Releases 2.1, 2.2, 3.1.0S, and 3.1.0S (or later) protocol support

    Connectivity

    Refer to Cisco ASR 1000 Series SIP data sheet for SPA support

    Memory

    For 2.5- and 5-Gbps integrated ESP in Cisco ASR 1001: 256-MB Cisco QFP, 1-GB DRAM,

    5-Mb TCAM, and 64-MB packet buffer memory

    For 5-Gbps Cisco ASR 1000 ESP: 256-MB Cisco QFP, 1-GB DRAM, 5-Mb TCAM,

    and 64-MB packet buffer memory

    For 10-Gbps Cisco ASR 1000 ESP: 512-MB Cisco QFP, 2-GB DRAM, 10-Mb TCAM, and 128 MB packet buffer memory

    For 10-N-Gbps Cisco ASR 1000 ESP: 512-MB Cisco QFP, 2-GB DRAM, 10-Mb TCAM, and 128 MB packet buffer memory

    For 20-Gbps Cisco ASR 1000 ESP: 1-GB Cisco QFP, 4-GB DRAM, 40-Mb TCAM, and

    256-MB packet buffer memory

    For 40-Gbps Cisco ASR 1000 ESP: 1-GB Cisco QFP, 8-GB DRAM, 40-Mb TCAM, and

    256-MB packet buffer memory

    For 100-Gbps Cisco ASR 1000 ESP: 4-GB Cisco QFP, 16-GB DRAM, 80-Mb TCAM, and

    1-GB packet buffer memory

    For 200-Gbps Cisco ASR 1000 ESP: 8-GB Cisco QFP, 32-GB DRAM, 160-Mb TCAM, and

    2-GB packet buffer memory

    Reliability and availability

    For 10- 10-N-, 20-, 40-, 100-, and 200-Gbps Cisco ASR 1000 ESPs: High-availability 1 + 1 redundancy in dual ESP configuration in combination with Cisco ASR 1006, ASR 1006-X, ASR 1009-X or ASR 1013 Router chassis

    Support for OIR

    Support for NSF and SSO

    Support for In-Service Software Upgrade (ISSU) with Cisco ASR 1006, ASR 1006-X, ASR 1009-X and ASR 1013 in combination with dual route processors and dual ESPs

    MIBs

    RFC 2737 compliant

    Network management

    Network management through Cisco ASR 1000 Series Route Processor:

    ●  Telnet (CLI)
    ●  Console port (through the CLI)
    ●  SNMP (RFC 2665)

    Status LED descriptions

    No

    LED Label

    LED

    Color-State

    Behavior Description

    -

    PWR

    Power

    Solid green

    All power rails are within specifications

    Off

    Off, the route is in standby mode

    -

    STAT

    System status

    Solid green

    Cisco IOS Software has successfully booted

    -

    -

    -

    Yellow

    BOOT ROMmon has successfully loaded

    -

    -

    -

    Red

    System failure; on power up, turned off by software

    -

    ACTV

    Activity

    Green

    Lit when this is the active route processor

    -

    STBY

    Standby

    Yellow

    Lit when this is the standby route processor

    Physical dimensions
    (H x W x D)

    For 10-, 10-N-, 20-, 40-, and 100-Gbps Cisco ASR 1000 ESPs: 0.92 x 16.7 x 14.19 in. (0.023 x 0.428 x 0.369m)

    For 200-Gbps Cisco ASR 1000 ESP: 2.44 x 16.7 x 14.19 in. (0.062 x 0.428 x 0.369m)

    Power

    For 5-, 10-, and 10-N-Gbps Cisco ASR 1000 ESPs: 188W maximum (typical: 140W)

    For 20-Gbps Cisco ASR 1000 ESP: 230W maximum (typical: 150W)

    For 40-Gbps Cisco ASR 1000 ESP: 267W maximum (typical: 227W)

    For 100-Gbps Cisco ASR 1000 ESP: 450W maximum (typical: 390W)

    For 200-Gbps Cisco ASR 1000 ESP: 938W maximum (typical: 785W)

    Approvals and compliance

    Safety

    ●  UL60950 and CAN/CSA-C22.2 No. 60950. Information technology equipment
    ●  AS/NZS 60950
    ●  IEC/EN 60950 Information technology equipment
    ●  73/23/EEC

    Electromagnetic Emissions Certification

    ●  AS/NZ 3548: 1995 (including AMD I + II) Class A
    ●  EN55022: 1998 Class A
    ●  CISPR 22: 1997
    ●  EN55022: 1994 (including AMD I + II)
    ●  47 CFR Part 15: 2000 (FCC) Class A
    ●  VCCI V-3/01.4 Class A
    ●  CNS-13438: 1997 Class A
    ●  GR1089: 1997 (including Rev. 1: 1999)

    Immunity

    ●  EN300386: 2000-TNE EMC requirements; product family standard; high priority of service; central office and
    non-central office locations
    ●  EN50082-1: 1992/1997
    ●  EN50082-2: 1995-Generic Immunity Standard, Heavy Industrial
    ●  CISPR24: 1997
    ●  EN55024: 1998-Generic ITE immunity standard
    ●  EN61000-4-2: 1995 + AMD I + II ESD, Level 4/8 kV contact, 15 kV air
    ●  IEC-1000-4-3: 1995 + AMD 1-Radiated Immunity, 10 V/m
    ●  IEC-1000-4-4: 1995-Electrical Fast Transients, Level 4/4 kV/B
    ●  IEC-1000-4-5: 1995 + AMD 1-DC Surge-Class 3; AC Surge-Class 4
    ●  EN61000-4-6: 1996 + AMD 1-RF conducted immunity, 10V rms
    ●  EN61000-4-11: 1995-Voltage Dips and Sags
    ●  ETS300 132-2: 1996 + corrigendum, December 1996
    ●  GR1089:1997 (including Rev1: 1999)

    Network Equipment Building Standards

    The module meets the following Networking Equipment Building Standards (NEBS):

    ●  GR-1089-CORE
    ●  GR-63-CORE
    ●  European Telecommunication Standards Institute (ETSI)
    ●  ETSI 300 386-1 - Levels for equipment with a "high priority of service" that is installed in "locations other than telecommunication centers"
    ●  ETSI 300 386-2:1997 - Levels for equipment with a "high priority of service" that is installed in "locations other than telecommunication centers"
    ●  ETSI 300 132-2: December 1994 - Power supply interfaces at the input to telecommunications equipment Sections 4.8 and 4.9

    Environmental

    Storage temperature: - 38 to 150°F (- 40 to 70°C)

    Operating temperature, nominal: 41 to 104°F (5 to 40°C)

    Operating temperature, short-term: 23 to 131°F (- 5 to 55°C)

    Storage relative humidity (RH): 5 to 95% RH

    Operating humidity, nominal: 5 to 85% RH

    Operating humidity, short-term: 5 to 90% RH

    Operating altitude: - 60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

    Table 13.     Specifications of Integrated ESP Module in Cisco ASR 1002-X Chassis

    Feature

    Specification

    Product compatibility

    The ESP module is integrated in the Cisco ASR 1002-X chassis.

    Software compatibility

    Cisco IOS XE Software Release 3.7.0S or later

    Protocols

    Refer to Cisco IOS XE Software Release 3.7.0S (or later) protocol support

    Connectivity

    Refer to Cisco ASR 1000 Series SIP data sheet for SPA support. The SIP is integrated in the Cisco ASR 1002-X chassis.

    Memory

    1-GB Cisco QFP Resource Memory, 40-Mb TCAM, and 512-MB packet buffet memory. The integrated ESP shares the same control memory on the route processor

    Reliability and availability

    Software redundancy support: Yes

    Hardware redundancy support: No

    Support for OIR

    Support for NSF and SSO

    MIBs

    RFC 2737 compliant

    Network management

    Network management through Cisco ASR 1000 Series Route Processor:

    ●  Telnet (CLI)
    ●  Console port (through the CLI)
    ●  SNMP (RFC 2665)

    Status LED descriptions

    LED Label

    LED

    Color-State

    Behavior Description

    PWR

    Power

    Solid green

    All power rails are within specifications

    Off

    Off, the route is in standby mode

    STAT

    System status

    Solid green

    Cisco IOS Software has successfully booted

    -

    -

    Yellow

    BOOT ROMmon has successfully loaded

    -

    -

    Red

    System failure; on power up, turned off by software

    Physical dimensions
    (H x W x D)

    Not applicable: The ESP module is integrated in the Cisco ASR 1002-X chassis.

    Power

    Not applicable: The ESP module is integrated in the Cisco ASR 1002-X chassis.

    Approvals and compliance

    Same as for other ESP modules

    Environmental

    Same as for other ESP modules

    System Requirements

    Table 14 details the system requirements of Cisco ASR 1000 ESPs.

    Table 14.     System Requirements

    System

    Requirement

    Hardware

    2.5- and 5-Gbps ESPs integrated in Cisco ASR 1001 chassis; default performance is 2.5 Gbps and can be upgraded to 5 Gbps with a license through software activation

    2.5-Gbps ESP integrated in Cisco ASR 1002-F chassis

    5-, 10-, 20-, and 36-Gbps ESPs integrated in Cisco ASR 1002-X chassis; default performance is 5 Gbps and can be upgraded to 10, 20, or 36 Gbps with a license through software activation

    For 5-Gbps Cisco ASR 1000 ESP: Cisco ASR 1002 Router chassis only

    For 10- and 10-N-Gbps Cisco ASR 1000 ESPs: Cisco ASR 1002 Router chassis

    or

    Cisco ASR 1004 Router chassis with one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor

    or

    Cisco ASR 1006 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor

    For 20-Gbps Cisco ASR 1000 ESP: Cisco ASR 1004 Router chassis with one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor

    or

    Cisco ASR 1006 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor

    For 40-Gbps Cisco ASR 1000 ESP: Cisco ASR 1006 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor

    or

    Cisco ASR 1004 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor

    or

    Cisco ASR 1013 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor

    or

    Cisco ASR 1006-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line Card

    Or

     

    Cisco ASR 1009-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line Card

    For 100-Gbps Cisco ASR 1000 ESP: Cisco ASR 1006 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor

    or

    Cisco ASR 1013 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line Card

    or

    Cisco ASR 1006-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor or Cisco ASR 1000 Ethernet Line Card

    or

    Cisco ASR 1009-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor

    For 200-Gbps Cisco ASR 1000 ESP: Cisco ASR 1013 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line Card

    or

    Cisco ASR 1009-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line Card

    Software

    Cisco IOS XE Software Release 2.1 (for 5- and 10-Gbps ESPs only) or later 
    (10-N- and 20-Gbps ESPs: Release 2.2 or later)

    Cisco IOS XE Software Release 2.4 (for 2.5-Gbps ESP integrated in the Cisco ASR 1002-F chassis)

    Cisco IOS XE Software Release 3.1.0S (for 40-Gbps ESP) or later

    Cisco IOS XE Software Release 3.2.0S (for 40-Gbps ESP support on Cisco ASR 1004) or later

    Cisco IOS XE Software Release 3.2.0S (for integrated ESP in Cisco ASR 1001 chassis) or later

    Cisco IOS XE Software Release 3.7.0S (for integrated ESP in Cisco ASR 1002-X chassis) or later

    Cisco IOS XE Software Release 3.7.1S or later for 100-Gbps ESP

    Cisco IOS XE Software Release 3.10.0S or later for 200-Gbps ESP

    Note:    Cisco ASR 1002-F chassis with the integrated ESP module offering up to 2.5 Gbps is supported as of Cisco IOS XE Software Release 2.4 and therefore requires as a minimum the Cisco IOS XE Software Release 2.4. Cisco ASR 1001 chassis with an integrated ESP module is supported as of Cisco IOS XE Software Release 3.2S. Cisco ASR 1002-X chassis with an integrated ESP module is supported as of Cisco IOS XE Software Release 3.7S. For information about the software and feature licenses supported on the Cisco ASR 1001 and ASR 1002-X, please refer to the Cisco ASR 1000 Software Activation product bulletin.

    Performance and Scaling

    All performance numbers are based on the RFC-2544 test methodology.

    Table 15 lists the performance and scaling features offered by the Cisco ASR 1001 chassis with an integrated ESP module.

    Table 15.     Cisco ASR 1001 with Integrated 5-Gbps ESP Module and 8-GB Memory

    Feature

    Specification

    Performance

    Up to 7.5 Mpps

    Variable forwarding performance, depending on features configured

    Up to 4 Mpps

    For the combination of the following commonly used features: IPv4 forwarding, access control list (ACL), QoS, and Unicast Reverse Path Forwarding (URPF)

    Bandwidth

    Up to 5 Gbps

    For the combination of commonly used features later than Firewall or NAT

    Up to 1.8 Gbps

    For plain IPsec encryption (1400-byte packets)

    Scaling

    Access control

    Up to 4,000 unique ACLs and 25,000 application control entries (ACEs) per system

    Broadband

    Up to 8,000 sessions and 4,000 Layer 2 Tunneling Protocol (L2TP) tunnels

    IP

    Up to:

    ●  500,000 IPv4 or 500,000 IPv6 routes with 4-GB memory
    ●  1,000,000 IPv4 or 1,000,000 IPv6 routes with 8- or 16-GB memory

    Multicast: 64,000 routes and 1,000 groups

    QoS

    Flexible number of queues per system:

    ●  Up to 16,000 queues
    ●  Three levels of hierarchy

    <100-microsecond latency for high-priority applications

    Real-time traffic

    Up to 2,000 Compressed Real-Time Transport Protocol (CRTP) sessions

    Security

    Up to:

    ●  IPsec: 4,000 tunnels Firewall: 256,000 sessions
    ●  NAT: 256,000 sessions
    ●  Carrier-Grade NAT: 500,000 sessions
    ●  Firewall and NAT: 125,000 sessions

    Layer 3 VPN (L3VPN)

    Up to 4,000 Virtual Route Forwarding (VRF) instances

    Generic routing encapsulation (GRE)

    Up to 4,000 tunnels

    Cisco Unified Border Element (Enterprise Edition) (formerly called Cisco Session Border Controller, or SBC)

    Up to 10,000 sessions (each session represents a complete voice call with 14 Session Initiation Protocol [SIP] messages per call; that is, two call legs on the SBC consisting of two media legs for a bidirectional media flow and seven SIP messages per call leg)

    Table 16 lists the performance and scaling features offered by the Cisco ASR 1001-X chassis with an integrated ESP module.

    Table 16.     Cisco ASR 1001-X with Integrated ESP Module and 8-GB Memory

    Feature

    Specification

    Performance

    Up to 19 Mpps

    Variable forwarding performance, depending on features configured

    Up to 6.7 Mpps

    For the combination of the following commonly used features: IPv4 forwarding, ACL, QoS, and URPF

    Bandwidth

    Up to 20 Gbps

    For the combination of commonly used features later than Firewall or NAT

    Up to 8 Gbps

    For plain IPsec encryption (1400-byte packets)

    Scaling

    Access control

    Up to 4,000 unique ACLs and 50,000 ACEs per system

    Broadband

    Up to 8,000 sessions and 4,000 L2TP tunnels

    IP

    Up to:

    ●  1,000,000 IPv4 or 1,000,000 IPv6 routes with 8-GB memory
    ●  3,500,000 IPv4 or 3,000,000 IPv6 routes with 16-GB memory

    Multicast: 100,000 routes and 4,000 groups

    QoS

    Flexible number of queues per system:

    ●  Up to 16,000 queues
    ●  Three levels of hierarchy
    ●  Two low-latency queuing (LLQ) queues per policy, with up to 1,000 policies

    <100-microsecond latency for high-priority applications

    Real-time traffic

    Additional Information

    SKU ASR1000-RP1-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/datasheet-c78-731640.html
    Condition Refresh
    Module Type Route Processor

    ASR1000-RP1-RF

    AED

    AED 0

    0