Double click on above image to view full picture

Zoom Out
Zoom In



Cisco Refurbished
Original Part No : C6800IA-48FPD=

Catalyst 6800 Instant Access POE+ Switch REMANUFACTURED

Availability: In stock

Available Quantity: 18000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Cisco® Catalyst® Instant Access is a solution to dramatically simplify the campus network operations, a game changer for business transformation creating opportunities for innovation in the campus. It simplifies operation through a single point of operation and management for campus access and backbone. The solution is composed of a Cisco Catalyst 6500 or 6800 core switch and Cisco Catalyst 6800ia Series Switches (Figure 1). The Cisco Catalyst 6800ia access switches are connected to the Cisco Catalyst 6500 or 6800, and the entire configuration works as a single extended switch with a single management domain. This allows Catalyst 6500/6800 features to be extended to network access e.g. MPLS/EVN in access. This solution is optimized for wired devices with centralized wireless. The access switches can support Power over Ethernet Plus (PoE+), and the access switches can be stacked together for higher port density and resiliency. IT has flexibility to deploy the Cisco Catalyst Instant Access solution on all or a subset of the campus network. IT can reuse existing network cabling infrastructure to deploy this solution.

    Figure 1.      Cisco Catalyst 6800ia Series Switches


    Product Overview

    The Cisco Catalyst 6800ia solution offers network administrators the ability to look at buildings in a campus network as a single switch. The entire building can be viewed as a single management entity. The Cisco Catalyst 6800ia solution is managed by the parent Cisco Catalyst 6500/6800* switch. The Cisco Catalyst 6800ia solution offers feature consistency across the access and distribution layers of the campus Ethernet network. The Cisco Catalyst 6800ia is an extension of the Cisco Catalyst 6500/6800 parent switch. The Cisco Catalyst 6800ia solution is very resilient with its support of multichassis EtherChannel and stacking. The Cisco Catalyst 6800ia solution does not use Spanning Tree Protocol in the links between the Cisco Catalyst 6800ia switch and the Cisco Catalyst 6500/6800 parent switch. The Cisco Catalyst 6800ia solution supports Virtual Switching System Cisco Catalyst 6800ia switches do not perform any local packet forwarding. All traffic originating from host ports (downlink ports) of a Cisco Catalyst 6800ia switch will be sent to an Instant Access parent, which makes all the switching and forwarding decisions for the traffic to be forwarded to the destination.

    * All the Cisco Catalyst 6800 series switches (6807-XL, 6880-X, 6840-X) supports the 6800ia switches.

    The Cisco Catalyst 6800ia switch inherits the features and capabilities of its parent in an Instant Access solution. Consider the Cisco Catalyst 6500 Series Supervisor Engine 2T as an Instant Access parent switch. In this case the Cisco Catalyst 6800ia client switch will inherit all the features of the Supervisor Engine 2T, which includes Security Group Tags (SGT), Security Group Access Control List (SGACL), Enhanced Interior Gateway Routing Protocol (EIGRP), IPv6, mediatrace, Multiprotocol Label Switching (MPLS), and so on:

       48 Gigabit Ethernet ports

       Integrated FlexStack-Plus capability, which provides up to 80 Gbps stack bandwidth

       Support of up to three members in a stack

       Two 10G Small Form-Factor Pluggable Plus (SFP+) uplinks

       External RPS power redundancy for Cisco Catalyst 6800ia

       Mini USB and Ethernet ports for versatile console management

       All ports in Cisco Catalyst 6800ia series are MACsec hardware ready

       IEEE 802.3at-compliant PoE+ for up to 30W of power per port

       Up to 740W of combined PoE/PoE+ budget

       IEEE 802.3az Energy-Efficient Ethernet (EEE) enables dynamic power savings on all switch ports

       Dynamic power mapping to scale up to 740W PoE+ power

       Limited Lifetime Warranty

       Removable redundant power supply available with C6800IA-48FPDR

    Switch Configurations

    The Cisco Catalyst 6800ia families of switches have two power configurations. The first two models, C6800IA-48TD, and C6800IA-48FPD, support a single built-in power supply and fan. The power redundancy for these two models is supported by an external RPS. The third model is C6800IA-48FPDR, which supports two redundant removable power supplies, each power supply with a power budget of 1025W of total system power. The 1025W power supply has an inline power budget of 740W.

    Table 1.       Cisco Catalyst 6800ia Family Switches Configurations


    Ethernet Ports

    Uplink Interfaces

    Cisco IOS Software Image

    Available PoE Power

    Redundant Power Supply (W)

    FlexStack-Plus Capability

    Cisco Catalyst C6800IA-48FPD


    2 SFP+ 10G

    Integrated with IA parent




    Cisco Catalyst C6800IA-48TD


    2 SFP+ 10G

    Integrated with IA parent




    Cisco Catalyst 6800IA-48FPDR


    2 SFP+ 10G

    Integrated with IA parent


    Yes (1025WAC)


    Cisco FlexStack-Plus

    Cisco FlexStack-Plus provides stacking of up to three Cisco Catalyst 6800ia switches through an integrated module. The Cisco Catalyst 6800ia switches only stack with other Cisco Catalyst 6800ia switches.

    Cisco FlexStack-Plus and Cisco IOS®Software provide true stacking, with all switches in a stack acting as a single switch unit. FlexStack-Plus provides a unified data plane for all Ethernet traffic for all members of the stack.

    Power over Ethernet Plus

    Cisco Catalyst 6800ia switches support both IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet® wireless access points, or other standards-compliant PoE/PoE+ end devices. PoE removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.

    Table 2 shows the total PoE/PoE+ power available in Cisco Catalyst 6800ia models.

    Table 2.       PoE and PoE+ Power Capacity for Cisco Catalyst 6800IA

    Switch Model

    Maximum Number of PoE+
    (IEEE 802.3at) Ports*

    Maximum Number of PoE
    (IEEE 802.3af) Ports*

    Available PoE Power 
    (Single PS Source)

    Cisco Catalyst C6800IA-48FPD

    24 ports up to 30W

    48 ports up to 15.4W


    Cisco Catalyst C6800IA-48FPDR

    24 ports up to 30W

    48 ports up to 15.4W


    * Intelligent power management allows flexible power allocation across all ports.

    Table 3 shows power supplies supported with C6800IA-48FPDR SKU.

    Table 3.       Power Supply Capacity for Cisco Catalyst C6800IA-48FPDR

    Primary Power Supply

    Secondary Power Supply

    Available Power for PoE+

    System Power

    Power Redundancy











    Power Management

    IEEE 802.3az EEE is implemented in all Cisco Catalyst 6800ia Series Switches. The EEE enables all the Ethernet ports to dynamically sense idle periods between traffic bursts and quickly switch the interfaces into “low power idle” mode, reducing port power consumption. It automatically brings back full power to the port with resumption of the traffic. The EEE technology maintains the link health using “link refresh” during the “idle” periods, making sure that there is no link-status change.

    Technical Specifications

    Tables 4 through 9 describe Cisco Catalyst 6800ia Series hardware, mechanical specifications, connectors and interfaces, and safety and compliance, respectively.

    Table 4.       Cisco Catalyst 6800ia Series Hardware

    Hardware Specifications

    Flash memory

    128 MB


    512 MB


    APM86392 600MHz dual core

    Console ports

    USB (Type-B), Ethernet (RJ-45)

    Network management interface

    10/100 Mbps Ethernet (RJ-45)

    Egress Buffers

    4 MB

    Table 5.       Cisco Catalyst 6800ia Series Mechanical Specifications





    Inches (H x D x W)

    Centimeters (H x D x W)


    1.75 x 14.5 x 17.5

    4.45 x 36.83 x 44.45


    1.75 x 11.0 x 17.5

    4.45 x 27.94 x 44.45


    1.75 x 16.0 x 17.5

    4.45 x 40.8 x 44.5





    12.930 lbs

    5.865 Kg


    9.656 lbs

    4.380 Kg


    14.6 lbs

    6.6 Kg

    Table 6.       Predicted Reliability


    MTBF in Hours**









    ** Current estimates; later will be based on Telcordia SR-332 Issue 2 Methodology.

    Table 7.       Voltage and Power Ratings

    Input Voltage and Current


    Voltage (Autoranging)




    100 to 240 VAC

    9A to 4A

    50 to 60 Hz


    100 to 240 VAC

    1A to 0.5A

    50 to 60 Hz


    100 to 240 VAC

    10A to 5A

    50 to 60 Hz


    Power Rating (Switch Maximum Consumption Values)


    Consumption Values


    0.89 kVA


    0.049 kVA


    0.89 kVA

    Table 8.       Connectors and Interfaces

    Connectors and Interfaces

    Ethernet Interfaces

      10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
      100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
      1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

    SFP+ Interfaces

    For information about supported SFP+ modules, refer to the Transceiver Compatibility matrix tables atcisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

    Indicator LEDs

      Per-port status: Link integrity, disabled, activity, speed, and full duplex
      System status: System, RPS, stack link status, link duplex, PoE, and link speed

    Stacking Interfaces

    Cisco Catalyst 6800ia FlexStack-Plus stacking cables:

      CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length
      CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length
      CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length


    Cisco Catalyst 6800ia console cables:

      CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
      CAB-CONSOLE-USB Console cable 6 ft. with USB mini-B connectors


      The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.
      Use the supplied AC power cord to connect the AC power connector to an AC power outlet
      The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch
      Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle

    Table 9.       Safety and Compliance



    Regulatory compliance

    Products should comply with CE Marking per directives 2004/108/EC and 2006/95/EC


    UL 60950-1 Second Edition

    CAN/CSA-C22.2 No. 60950-1 Second Edition

    EN 60950-1 Second Edition

    IEC 60950-1 Second Edition

    AS/NZS 60950-1

    EMC: Emissions

    47CFR Part 15 (CFR 47) Class A

    AS/NZS CISPR22 Class A

    CISPR22 Class A

    EN55022 Class A

    ICES003 Class A

    VCCI Class A



    KN22 Class A

    CNS13438 Class A

    EMC: Immunity






    Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU


    Common Language Equipment Identifier (CLEI) code

    Additional Information

    SKU C6800IA-48FPD-RF
    Weight (Kg) 6
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6800ia-switch/data_sheet_c78-728230.html
    Condition Refresh
    Switch Series 6800 Series
    Device Type Modular
    Power Rating 740 watts
    Number of Access Ports 48
    Access Port Speed 1 Gbps
    Number of Uplink Ports 2
    Uplink Ports Speed 10 Gig
    PoE Ports Full PoE
    Rack Mountable Yes
    Stackable Yes



    AED 0