CISCO7604-RF

Double click on above image to view full picture

Zoom Out
Zoom In

CISCO7604-RF

Description:

Cisco Refurbished
Original Part No : CISCO7604=

Cisco 7604 Chassis REMANUFACTURED
AED 0

Availability: Out of stock


Not Available

  • Add to Compare
  • Details

    The Cisco® 7604 Router is a compact, high-performance router designed in a 4-slot form factor for deployment at the network edge, where robust performance and IP/Multiprotocol Label Switching (MPLS) services are necessary to meet the requirements of both enterprises and service providers. It enables Carrier Ethernet service providers to deploy an advanced network infrastructure that supports a range of IP video and triple-play (voice, video, and data) system applications in both the residential and business services markets. The Cisco 7604 also delivers WAN and metropolitan-area network (MAN) networking solutions at the enterprise edge.

    With a powerful combination of speed and services in a compact form factor, the Cisco 7604 is an outstanding choice for multiple applications. Whether deployed as a mobile Radio Access Network (RAN) preaggregation device, as a device for peering, as a residential broadband services aggregator, or as a device for Metro Ethernet aggregation and uplink, the Cisco 7604 meets requirements for redundancy, high availability, and rack density. In the point-of-presence (POP) enterprise edge or the metropolitan network edge, the Cisco 7604 sets new standards as part of the industry-leading Cisco 7600 Series Routers (Figure 1).

    Figure 1. Cisco 7604 Router

    With a forwarding rate of up to 144-Mpps distributed and 320-Gbps total throughput, the Cisco 7604 provides performance and reliability with options for redundant route processors and power supplies. The inclusion of two Gigabit Ethernet ports on the Cisco Catalyst® 6500 Series Supervisor Engine 720 with the Multilayer Switch Feature Card 3 (MSFC-3) or the new Cisco Route Switch Processor 720 (RSP 720) with the MSFC-4 used in the Cisco 7604 eliminates the need for a line-card slot for uplink ports. The result of this design is more efficient use of available line-card slots and increased deployment flexibility. Four Gigabit Ethernet ports are available for use in dual-route processor configurations.

    Shared port adaptors (SPAa) on the SPA interface processors ( SIPs) are available on the Cisco 7600 Series with interface speeds ranging from OC-3 to OC-192 and from Fast Ethernet to 10 Gigabit Ethernet. The Cisco 7600 Series can also use the Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN Module to take advantage of most Cisco 7200 and 7500 Port Adapters for terminating DS-0 to OC-3 speeds. By using the Cisco Catalyst 6000 Series of Ethernet line cards in conjunction with the SIP-based SPAs and the enhanced FlexWAN module, the Cisco 7600 provides a multitude of options to scale WAN connectivity from DS-0 to OC-192 and LAN connectivity from 10-Mbps Ethernet through 10 Gigabit Ethernet.

    The Cisco 7604 chassis accommodates a broad selection of line cards supporting numerous applications, including:

     SPAs and SIPs (Cisco 7600 Series SPA Interface Processor-200 [SIP-200], SIP-400, and SIP-600):

    - Channelized T1/E1, Channelized T3, and Channelized OC-3/STM-1

    - OC-3/STM-1, OC-12/STM-4, OC-48/STM-16 Packet over SONET/SDH (PoS), and OC-192/STM-64 PoS

    - OC-3/STM-1 ATM, OC-12/STM-4 ATM, and OC-48/STM-16 ATM

    - Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet

     Enhanced FlexWAN module: Supporting Cisco 7200 and 7500 WAN Port Adapters from DS-0 to OC-3 for channelized and ATM interfaces and also Fast Ethernet port adapters

     High-density Ethernet services modules: 10/100 Mbps, Gigabit Ethernet, and 10 Gigabit Ethernet

     Services modules: IP Security (IPsec), firewall, distributed denial of service, intrusion detection, network analysis, and content switching commonly used, for example, in the Cisco Mobile Exchange solution

     Supervisor support: Cisco Catalyst 6500 Supervisor Engine 32 (WS-SUP32-GE-3B and WS-SUP32-10GE-3B), Cisco Catalyst 6500 Supervisor Engine 720 (WS-SUP720-3B and WS-SUP720-3BXL), and the new Cisco Route Switch Processor 720 (RSP720-3C and RSP720-3CXL)

    The Cisco 7604 can be configured two ways: with a single supervisor engine and up to three line cards, or with dual supervisor engines and up to two line cards for high availability and redundancy. The Cisco 7604 also supports redundant 2700W (AC/DC) power supplies for increased availability. Understanding the need to use rack space efficiently, Cisco designed this router to be 8.75 inches tall (5 rack units [RUs]), with single-side connection management for both interface and power terminations. This setup allows placement of up to nine Cisco 7604 units per standard 7-foot rack.

    Applications

    The flexible Cisco 7604 Router is ideal for addressing high-performance applications such as:

     IP/MPLS provider edge

     Metro Ethernet access

     Enterprise WAN aggregation

     Mobile RAN preaggregation

     Residential subscriber aggregation

     Customer premises equipment (CPE)

     Leased line

    Feature Summary

    Cisco 7604 Chassis Features

     5RU (8.75-in.) compact chassis, up to nine chassis per 7-foot rack

     Four slots (2 supervisor slots and 2 interface slots or 1 supervisor slot with 3 interface slots)

     Route processor protection capability: 1 + 1

     Power supply protection option, AC or DC: 1 + 1

     Network Equipment Building Standards (NEBS) Level 3 compliance (post-first customer shipment [FCS])

     Single-side connection management for interface and power terminations

     Side-to-side airflow

    Cisco 7604 System Features

     Total throughput: 320 Gbps

     Up to 144-Mpps forwarding rate distributed

    Technical Specifications

    Table 1 gives specifications of the Cisco 7604.

    Table 1. Product Specifications

    Features

    Descriptions

    Physical specifications

    5RU (8.75-in.) chassis

    4-slot chassis

    Dimensions (H x W x D): 8.75 x 17.5 x 21.75 in. (22.225 x 44.45 x 55.245 cm)

    Weight: 40 lb

    Power requirements: 110 to 240 VAC, –48 to –60 VDC

    Mean time between failure (MTBF): 7 years for system configuration

    Environmental conditions

    Operating temperature: 32 to 104°F (0 to 40°C)

    Storage temperature: –4 to 149°F (–20 to 65°C)

    Relative humidity, operating: 10 to 85% noncondensing

    Relative humidity, storage: 5 to 95% noncondensing

    Operating altitude: –500 to 6500 ft

    Regulatory compliance

    EMC

     FCC Part 15 (CFR 47) Class A
     ICES-003 Class A
     EN55022 Class A
     CISPR22 Class A
     AS/NZS 3548 Class A
     VCCI Class A
     EN55024
     ETS300 386
     EN50082-1
     EN61000-3-2
     EN61000-3-3

    Regulatory Compliance

     UL 60950
     IEC 60825-1, -2
     IEC 60950
     EN 60950, EN 60825-1, -2
     CAN/CSA-C22.2 No. 60950-00
     AS/NZS 3260-1993
     21CFR1040

    Safety and environmental standards compliance

     GR-63-Core NEBS Level 3 (post-FCS)
     GR-1089-Core NEBS Level 3 (post-FCS)
     ETSI 300 019 Storage Class 1.1
     ETSI 300 019 Transportation Class 2.3
     ETSI 300 019 Stationary Use Class 3.1

    Minimum software release

    Cisco IOS® Software Release 12.2.18SXE

    Ordering Information

    To place an order, visit the Cisco Ordering Home Page or refer to Table 2.

    Table 2. Ordering Information

    Chassis Bundles

    Description

    Spare Units

    Note that "=" denotes a spare order

    CISCO7604=

    Cisco 7604 Router, mounting kit, and cable guide

    PWR-2700-AC/4=

    2700-WAC power supply for Cisco 7604

    PWR-2700-DC/4=

    2700-WDC power supply for Cisco 7604

    CAB-7513ACU

    CAB-7513ACR

    CAB-7513ACSA

    CAB-ACS-10

    CAB-AC-2500W-US1

    CAB-AC-C6K-TWLK

    CAB-AC-2500W-EU

    CAB-AC-2500W-INT

    CAB-ACS-16

    CAB-AC-16A-AUS

    CAB-AC-2500W-ISRL

    CAB-7513AC

    CAB-C19-CBN

    AC power cord (U.K.)

    AC power cord (Argentina)

    AC power cord (South Africa )

    AC power cord (Swiss)

    Power cord, 250 VAC 16A, straight blade NEMA 6-20 plug, United States

    Power cord, 250 VAC 16A, twist lock NEMA L6-20 plug, United States

    Power cord, 250 VAC 16A, Europe

    Power cord, 250 VAC 16A, International

    AC power cord (Swiss) 16A

    Power Cord, 250VAC, 16A, Australia C19

    Power Cord, 250VAC, 16A, Israel

    AC Power Cord North America (110V)

    Cabinet Jumper Power Cord, 250 VAC 16A, C20-C19 Connectors

    FAN-MOD-4HS=

    High-speed fan module for Cisco 7604 Chassis

    KIT-MNTG-CG-4=

    Mounting kit and cable guide for Cisco 7604

    CLK-7600=

    Spare clock card for Cisco 7603, Cisco 7604, Cisco 7606, or Cisco 7609

    Service and Support

    Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.

    For More Information

    For more information about the Cisco 7604 Router, visit http://www.cisco.com/go/7600 or contact your local Cisco account representative.

    Additional Information

    SKU CISCO7604-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/7604-router/product_data_sheet0900aecd8027cc3e.html
    Condition Refresh
    Router Series 7600 Series
    Chassis Type Modular
    Rack Mountable Yes
    Built In Ports None
    Port Speed None
    Port Type None

    CISCO7604-RF

    AED

    AED 0

    0