Details
• Concurrent broadband services for small offices, and remote sites
• Secure connectivity with Stateful Inspection Firewall and IP Security (IPSec) VPN support for small offices
• Security features including:
– Stateful Inspection Firewall
– IP Security (IPSec) VPNs (Triple Data Encryption Standard [3DES] or Advanced Encryption Standard [AES])
• 4-port 10/100 Fast Ethernet managed switch with VLAN support
• CON/AUX Port for console or external modem
• Secure 802.11g/n access point option based on IEEE802.11n draft 2.0 standard
• Easy setup, deployment, and remote management capabilities through Web-based tools and Cisco IOS® Software
Figure 1. Cisco 861 Integrated Services Router with Integrated 802.11n Access Point

Table 1. Cisco 860 Series Models
Models |
WAN Interface |
LAN Interfaces |
802.11g/n Option |
Cisco 861 |
10/100 Mbps Fast Ethernet |
4-port 10/100 FE managed switch |
No |
Cisco 861W |
10/100 Mbps Fast Ethernet |
4-port 10/100 FE managed switch |
Yes |
Cisco 867 |
ADSL2/2+ over POTS (Annex A) |
4-port 10/100 FE managed switch |
No |
Cisco 867W |
ADSL2/2+ over POTS (Annex A) |
4-port 10/100 FE managed switch |
Yes |
Figure 2. Deployment Scenarios

Applications
Features and Benefits
Table 2. Features and Benefits
Feature |
Benefit |
Increased Performance to Run Concurrent Services |
• The performance in a Cisco 860 Series router allows customers to take advantage of broadband network speeds while running secure, concurrent services
|
Stateful Inspection Firewall and IPSec VPN Support |
• Provides secure access when connecting to the Internet or connecting small offices to a central site
|
4-Port 10/100 FE Managed Switch |
• Allows multiple devices to be connected in a small office, with the ability to designate a port as network DMZ
• VLANs allow for secure segmentation of network resources
|
Optional 802.11g/n AP |
• Broadband router with secure integrated access point in a single device.
• Integrated Wi-Fi Access Point with IEEE 802.11n draft 2.0 standard support for mobile access to high-bandwidth data, voice and video applications through the use of multiple-input multiple-output (MIMO) technology that provides increased throughput, reliability and predictability.
• Support for autonomous mode.
|
AUX/CONS Port |
• Single dual-purpose port provides direct connection to a console or external modem for management or backup
|
Cisco Configuration Professional (CCP) and Cisco IOS Software for Remote Management |
• Cisco Configuration Professional uses smart wizards and task-based tutorials which can be used by resellers and customers to quickly and easily deploy, configure, and monitor a Cisco access router without requiring knowledge of the Cisco IOS ® Software command-line interface (CLI)
|
Summary
Product Specifications
Table 3. Cisco IOS Software Features on Cisco 860 Series Routers-Advanced Security Feature Set (Default)
Feature |
Description |
IP and IP Services Features |
• Routing Information Protocol (RIPv1 and RIPv2)
• Generic routing encapsulation (GRE)/MGRE
• Cisco Express Forwarding (CEF)
• 802.1d Spanning Tree Protocol (STP)
• Layer 2 Tunneling Protocol (L2TP)
• Network Address Translation (NAT)
• Dynamic Host Control Protocol (DHCP) server/relay/client
• Dynamic DNS
• DNS Proxy
• DNS Spoofing
• Access control lists (ACLs)
|
Switch Features |
• Auto MDI-MDX
• 2 802.1Q VLANs
• Switch Port Analyzer (SPAN)
• Storm Control
• Smartports
|
DSL and ATM features (ADSL models only) |
• ATM Variable Bit Rate real-time (VBR-rt)
• ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate non-realtime (VBR-nrt)
• ATM operations, administration, and maintenance (OA&M) support for F5 Continuity Check; segment and end-to-end loopback; and Integrated Local Management Interface (ILMI) support
• Dying gasp support
• TX ring adjustment
• Virtual-circuit (VC) bundling
• Per VC queuing
• Per VC traffic shaping
• 10 ATM virtual circuits
• RFCs 1483 and 2684
• Point-to-Point Protocol over ATM (PPPoA)
• PPP over Ethernet (PPPoE)
|
Security Features |
Secure Connectivity • IPSec VPN
• Hardware-accelerated DES, 3DES, AES128, AES192, AES256
• Public Key Infrastructure (PKI) support
• 5 IPSec Tunnels
• Cisco Easy VPN Client and Server
• NAT transparency
Zone-Based Policy Firewall • Stateful Inspection Routing Firewall
• Stateful Inspection Transparent Firewall
• Advanced Application Inspection and Control
Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy |
QoS Features |
• Weighted Fair Queuing (WFQ)
• Class-Based WFQ (CBWFQ)
• Class-Based QoS MIB
|
Management Features |
• Cisco Configuration Professional
• Cisco Configuration Express
• Cisco Configuration Engine support
• Cisco AutoInstall
• IP SLA
• Embedded Event Manager (EEM)
• CiscoWorks
• Cisco Security Manager
• Telnet, Simple Network Management Protocol (SNMPv3), SSH, CLI and HTTP management
• RADIUS and TACACS+
• Out-of-band management with external modem through virtual auxiliary port
|
High-Availability Features |
• Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
• Hot Standby Router Protocol (HSRP)
• MHSRP
• Dial backup with external modem through virtual auxiliary port
|
Number of Recommended Users |
• 5
|
Table 4. Cisco IOS Software Features on Cisco 860 Series Routers-WLAN Features (Available with Wireless Option)
Feature |
Description |
WLAN Hardware |
• IEEE 802.11n draft 2.0 standard based access point with 802.11 b/g compatibility
• Automatic rate selection for 802.11g/n
• Captive omnidirectional 2dBi gain omni dipole antennas
• 2x3 MIMO radio operation
• WiFi 802.11n Draft v2.0 certified
|
WLAN Software Features |
• Autonomous Access Point
• WCS support for autonomous configurations
• Maximize throughput or maximize range option
• Software-configurable transmit power
• Radio roles include access point, root bridge, non-root bridge, and workgroup bridge
• Wireless Multi Media Certification (WMM)
• TSPEC Call Admission Control to ensure voice quality is maintained
• Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency
|
WLAN Security Features |
• 802.11i
• Wi-Fi Protected Access (WPA) & AES (WPA2)
• EAP Authentication: Cisco LEAP, PEAP, EAP-TLS, EAP-FAST, EAP-SIM, EAP-MD5, EAP-TTLS
• Static and dynamic Wired Equivalent Privacy (WEP)
• Temporal Key Integrity Protocol (TKIP)/SSN [Temporal Key Integrity Protocol/Simple Security Network encryption
• MAC authentication/filter
• User database for survivable local authentication using LEAP & EAP-FAST
• Configurable limit to the number of wireless clients
• Configurable RADIUS accounting for wireless clients
• PSK (Pre Shared Keys) (WPA-SOHO)
|
Certifications |
![]() |
SSIDs |
• 10
|
Wireless VLANs |
• 2
|
Encrypted Wireless VLANs |
• 2
|
MBSSIDs |
• 10
|
System Specifications
Table 5. System Specifications
Feature |
Specification |
Default and Max DRAM |
256 MB |
Default and Max. Flash Memory |
128 MB |
WAN |
861: Fast Ethernet; 867: ADSL2/2+ over POTS (Annex A) |
LAN Switch |
Managed 4-port 10/100BASE-T Fast Ethernet with autosensing MDI/MDX (Media Device In/Media Device Cross Over) for autocrossover |
802.11g/n AP based on IEEE 802.11n draft 2.0 standard |
Optional on all models |
Console/Auxillary Port |
RJ-45 |
External Power Supply |
Universal 100 to 240 VAC |
Wireless Specifications |
|
Data Rates Supported |
• 802.11b: 1, 2, 5.5, 6, 9, 11 Mbps
• 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, m0-m15
|
Maximum Transmit Power |
Note: Maximum power setting subject to changes by channel and by region depending on regulations • 802.11b 20 dBm
• 802.11g 17 dBm
• 802.11n 16 dBm
|
Physical Dimensions and Weight |
Product dimensions: Nonwireless models: • W X D X H = 12.8" x 9.8" x 1.9" (325mm x 249mm x 48mm) (includes rubber feet)
• W X D X H = 12.8" x 9.8" x 1.75" (325mm x 249mm x 44mm) (without rubber feet)
Wireless models: • W X D X H = 12.8" x 10.4" x 1.9" (325mm x 264mm x 48mm) (includes rubber feet)
• W X D X H = 12.8" x 10.4" x 1.75" [325mm x 264mm x 44mm) (without rubber feet; excludes antennas)
• Weight: 5.5 lb (2.5 kg) maximum
|
Power |
Product power specifications: AC input voltage: 100 to 240 VAC • Frequency: 50 to 60 Hz
• Maximum output power: 60W
• Output voltages: 12V DC
|
Approvals and Compliance |
• IEC 60950-1:2005, Second Edition, with all country deviations
• AS/NZS 60950-1:2003, First Edition
• CAN/CSA 22.2 No. 60950-1-05, Second Edition
• UL 60950-1, Second Edition, 2005
• EN55024
• Industry Canada CS-03'
• TIA-968-A, Addendum 1, 2, 3, 4, 5
• EMI
• VCCI Class II
• IEC 1000-3-2
• California Energy Commission (CEC) Compliant
Australia and New Zealand: Australia AS/ACIF S031: 2001 Australia AS/ACIF S043.1: 2003 Australia AS/ACIF S043.2: 2006 New Zealand PTC220: 2003 |
Certifications |
![]() |
Environmental Operating Range |
• Nonoperating temperature: -4 to 149°F (-20 to 65°C)
• Nonoperating humidity: 5 to 95 percent relative humidity (noncondensing)
• Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)
• Operating temperature: 32 to 104°F (0 to 40°C)
• Operating humidity: 10 to 85%, relative humidity (noncondensing)
• Operating altitude: 0 to 10,000 ft (0 to 3000m)
|
Additional Information
SKU | CISCO861W-GNAK9-RF |
---|---|
Weight (Kg) | 1 |
Datasheet URL | http://www.cisco.com/c/en/us/products/collateral/routers/800-series-routers/data_sheet_c78_461543.html |
Condition | Refresh |
Router Series | 800 Series |
Chassis Type | Fixed |
Rack Mountable | No |
Built In Ports | 4 |
Port Speed | 100 Mbps |
Port Type | RJ45 |