CISCO891-K9-RF

Double click on above image to view full picture

Zoom Out
Zoom In

CISCO891-K9-RF

Description:

Cisco Refurbished
Original Part No : CISCO891-K9

Cisco 891 GigaE SecRouter REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 1295

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Cisco® 890 Series Integrated Services Routers (ISRs) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as customer premises equipment (CPE) in enterprise small branch offices and in service provider managed-service environments.

    Product Overview

    Cisco 890 Series ISRs deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks. These powerful, fixed-configuration routers provide secure broadband, Metro Ethernet, and wireless LAN (WLAN) connectivity. Service providers offering managed Ethernet WAN services can deploy them in customer locations as CPE. You get centralized and remote management capabilities through web-based tools and Cisco IOS® Software for full visibility and control of network configurations at the remote site.

    The 890 routers simplify the deployment of Ethernet WAN services, with end-to-end operations, administration, and maintenance (OA&M), service-level agreement (SLA) monitoring and verification, and configuration management.

    Cisco 890 Series ISRs come with an 8-port managed switch, providing LAN ports to connect multiple devices. An optional Power-over-Ethernet (PoE) capability can also supply power to IP phones and other devices. Eleven Cisco 890 Series models are available: Figure 1 shows the front and back of one, the Cisco 892FSP.

    Figure 1.      Cisco 892FSP ISR, Front and Back

     

    Features and Benefits

    Table 1 describes some of the business needs enterprises have in branch offices and other edge networking locations and how the 890 ISR fulfills those requirements.

    Table 1.       How the 890 ISR Addresses Edge Networking Challenges

    Business Need

    890 ISR Feature(s)/Description

    High availability and business continuity

    ●  Redundant WAN connections for failover protection and load balancing
    ●  Dynamic failover protocols such as Virtual Router Redundancy Protocol (VRRP; RFC 2338), Hot Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP)
    ●  Dial backup with external modem through a virtual auxiliary port

    Consistent, high application performance levels

    ●  The router can run multiple services simultaneously with no performance degradation

    Risk mitigation with multilevel security

    ●  Network perimeter security with integrated application inspection firewall
    ●  Data privacy through high-speed IP Security (IPsec) Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption
    ●  Enforced security policy with intrusion prevention
    ●  Security hardware acceleration
    ●  FlexVPN
    ●  Next-generation encryption for secure network communications systems, reliable for the next decade
    ●  Cisco ISR Web Security with Cisco ScanSafe, designed to prevent zero-day malware from reaching corporate networks

    Feature consolidation for real estate, capital expenditures (CapEx), and management savings

    ●  Supports LAN connections, both Ethernet and Wi-Fi, in one appliance. Contains an integrated 802.11n WLAN access point that supports both autonomous and unified modes, as well as an 8-port LAN switch. Management of both the wired and wireless environments is integrated

    Unified control of wired and wireless networks from a common console for streamlined operations

    ●  Simplifies and centralizes configuration and management of wireless and wireline devices. Supports WLAN services without requiring a wireless LAN controller

    Remote configuration and management to keep local IT staff lean

    ●  Supports separate console, auxiliary, and USB ports
    ●  Provides two USB 2.0 flash memory or security eTokens
    ●  Can be configured to work with optional USB token

    Platform Support

    Table 2 describes the interfaces, Wi-Fi options, and integrated capabilities supported by each of the Cisco 890 Series ISR models.

    Table 2.       Platform Support for 890 Series ISRs

    Model

    WAN Interfaces

    LAN Interfaces

    802.11a/g/n Option

    Integrated USB 2.0/AUX/Console

    Integrated Dial Backup

    Cisco 891

    1-port GE

    1-port FE

    8-port 10-/100-Mbps managed switch
    (4-ports PoE capable with 80W power supply adapter)

    Yes

    Yes

    V.92 analog modem

    Cisco 892

    1-port GE

    1-port FE

    8-port 10-/100-Mbps managed switch (4‑ports PoE capable with 80W power supply adapter)

    Yes

    Yes

    ISDN BRI

    Cisco 892F

    1-port GE or 1‑port SFP

    1-port FE

    8-port 10-/100-Mbps managed switch (4‑ports PoE capable with 80W power supply adapter)

    Yes

    Yes

    ISDN BRI

    Cisco 892FSP

    1-port GE or 1‑port SFP

    1-port GE

    8-port 10-/100-/1000-Mbps managed switch

    No

    Yes

    No

    Cisco 896VA

    1-port GE or 1‑port SFP

    VDSL/ADSL2+ Annex B

    8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)

    No

    Yes

    ISDN

    Cisco 897VA

    1-port GE or 1‑port SFP

    VDSL/ADSL2+ Annex A/M

    8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)

    Yes

    Cisco CleanAir® technology

    Yes

    ISDN (only on Cisco 897VA-K9)

    Cisco 897VAB

    1-port GE or 1‑port SFP

    VDSL/ADSL2+ Annex A with Bonding

    8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)

    No

    Yes

    No

    Cisco 898EA

    1-port GE or 1‑port SFP

    4 pair Ethernet in the first mile (EFM)

    8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)

    No

    Yes

    No

    Cisco 891F

    1-port GE or 1‑port SFP

    1-port FE

    8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)

    Yes

    Cisco CleanAir technology

    Yes

    V.92 analog modem

    ISDN BRI

    Cisco 891-24X

    2-port GE or 2‑port SFP

    24-port 10-/100-/1000-Mbps managed switch (8-ports PoE capable with integrated power supply)

    No

    Yes

    No

    Product Specifications

    Table 3 shows Cisco IOS Software features, WLAN features, and general system specifications for the 890 Series ISRs.

    Table 3.       890 Series IOS Software Features, WLAN Features, and System Specifications

    Feature

    Specification

     

    Cisco IOS Software: Advanced IP Features Set (Default)

    IP and IP services

    ●  Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
    ●  Generic routing encapsulation (GRE) and multipoint GRE (MGRE)
    ●  Cisco Express Forwarding
    ●  Standard 802.1d Spanning Tree Protocol
    ●  Layer 2 Tunneling Protocol (L2TP)
    ●  Layer 2 Tunneling Protocol Version 3 (L2TPv3)
    ●  Network Address Translation (NAT)
    ●  Dynamic Host Configuration Protocol (DHCP) server, relay, and client
    ●  Dynamic Domain Name System (DNS)
    ●  DNS Proxy
    ●  DNS Spoofing
    ●  Access control lists (ACLs)
    ●  IPv4 and IPv6 Multicast
    ●  Open Shortest Path First (OSPF)
    ●  Border Gateway Protocol (BGP)
    ●  Performance Routing (PfR)
    ●  Enhanced Interior Gateway Routing Protocol (EIGRP)
    ●  Virtual Route Forwarding (VRF) Lite
    ●  Next Hop Resolution Protocol (NHRP)
    ●  Bidirectional Forwarding Detection (BFD)
    ●  Web Cache Communication Protocol (WCCP)

     

    xDSL

    ●  True Multimode VDSL2 and ADSL2+ over Annex A, B, J, and M including traditional G.DMT and T1.413
    ●  World-class interoperability with industry-standard DSL access multiplexer (DSLAM) chipsets
    ●  Highest field reliability with Impulse Noise Protection over REIN/SHINE, Extended INP-Delay, G.INP, Physical Layer Retransmission, SRA, and Bitswap
    ●  VDSL2 Persistent Storage Device (PSD) profiles up to 17a/b with support for Spectral Shaping
    ●  VDSL2 Vectoring to offer blazing fiber speeds over copper
    ●  Support for 4-pair multimode G.SHDSL; that is, ATM and EFM
    ●  Remote management with TR069 and CWMP
    ●  Investment protection with GE and SFP for future fiber that could replace xDSL deployment

     

    Switch features

    ●  Auto Media Device In/Media Device Cross Over (MDI-MDX)
    ●  14 802.1QVLANs
    ●  MAC filtering
    ●  Four-port 802.3af and Cisco compliant PoE
    ●  Switched Port Analyzer (SPAN)
    ●  Storm Control
    ●  Smart ports
    ●  Secure MAC address
    ●  Internet Group Management Protocol Version 3 (IGMPv3) snooping
    ●  802.1x

     

    Security features

    Secure connectivity:

    ●  Secure Sockets Layer (SSL) VPN for secure remote access
    ●  Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256
    ●  Public-key-infrastructure (PKI) support
    ●  Fifty IPsec tunnels
    ●  Cisco Easy VPN Client and Server
    ●  NAT transparency
    ●  Dynamic Multipoint VPN (DMVPN)
    ●  Tunnel-less Group Encrypted Transport VPN
    ●  VRF-aware IPsec
    ●  IPsec over IPv6
    ●  Adaptive control technology
    ●  Session Initiation Protocol (SIP) application-layer gateway
    ●  Cisco IOS Firewall:
    ◦   Zone-Based Policy Firewall
    ◦   VRF-aware stateful inspection routing firewall
    ◦   Stateful inspection transparent firewall
    ●  Advanced application inspection and control
    ●  Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy
    ●  Dynamic and static port security
    ●  Firewall stateful failover
    ●  VRF-aware firewall
    ●  Cisco ScanSafe Connector
    ●  Cisco IOS Software black and white lists
    ●  Integrated threat control:
    ◦   Intrusion Prevention System (IPS)
    ●  Control Plane Policing
    ●  Flexible Packet Matching
    ●  Network foundation protection

     

    Quality of Service (QoS)

    ●  Low-Latency Queuing (LLQ)
    ●  Weighted Fair Queuing (WFQ)
    ●  Class-Based WFQ (CBWFQ)
    ●  Class-Based Traffic Shaping (CBTS)
    ●  Class-Based Traffic Policing (CBTP)
    ●  Policy-Based Routing (PBR)
    ●  Class-Based QoS MIB
    ●  Class of service (CoS)-to-differentiated services code point (DSCP) mapping
    ●  Class-Based Weighted Random Early Detection (CBWRED)
    ●  Network-Based Application Recognition (NBAR)
    ●  Link fragmentation and interleaving (LFI)
    ●  Resource Reservation Protocol (RSVP)
    ●  Real-Time Transport Protocol (RTP) header compression (cRTP)
    ●  Differentiated Services (DiffServ)
    ●  QoS preclassify and prefragmentation
    ●  Hierarchical QoS (HQoS)

     

    Management

    ●  Cisco Configuration Professional
    ●  Cisco Configuration Express
    ●  Cisco Configuration Engine support
    ●  Cisco AutoInstall
    ●  Cisco IP Service-Level Agreement (IP SLA)
    ●  Cisco IOS Embedded Event Manager (EEM)
    ●  CiscoWorks
    ●  Cisco Security Manager
    ●  Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, command-line interface (CLI), and HTTP management
    ●  RADIUS and TACACS+
    ●  Out-of-band management with ISDN S/T port or external modem through a virtual auxiliary port on models supporting those interfaces; refer to Table 2 for details
    ●  Cisco Wireless Control System (WCS) for management of unified access points in models supporting WLAN; on models supporting WLAN, refer to Table 2 for details

     

    High availability

    ●  Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
    ●  HSRP
    ●  MHSRP
    ●  Dial backup with external modem through virtual auxiliary port
    ●  Dial backup with ISDN S/T or V.92 Analog modem port

     

    Metro Ethernet

    ●  Ethernet OA&M
    ●  Ethernet Local Management Interface (E-LMI)
    ●  IP SLA for Ethernet

     

    IPv6

    ●  IPv6 addressing architecture
    ●  IPv6 name resolution
    ●  IPv6 statistics
    ●  IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-Protocol Translation)
    ●  Internet Control Message Protocol Version 6 (ICMPv6)
    ●  IPv6 DHCP
    ●  OSPFv3
    ●  BGP4+
    ●  IPv6 path maximum transmission unit (PMTU)
    ●  IPv6 Neighbor Discovery
    ●  IPv6 stateless address autoconfiguration (SLAAC)
    ●  IPv6 Multicast Routing

     

    Unified WLAN management

    ●  Unified access-point features:
    ◦        Supported by wireless LAN controller and Cisco WCS
    ●  Configurable local or central switching for Hybrid Remote Edge Access Point (HREAP) mode
    ●  Radio management through Cisco WCS
    ●  Transparent roaming with mobility groups

     

    Application visibility and control

    ●  Cisco Wide Area Application Services (WAASx)
    ●  NBAR2
    ●  Flexible NetFlow (FNF)
    ●  Performance Agent

     

    Number of recommended users

    50

     

    WLAN Features (Available with Wireless Option)

     

    Standard 802.11 a/g/n access point

    ●  Optional on Cisco 890 Series models

     

    WLAN hardware

    ●  Support for Cisco CleanAir technology on Cisco 897 and 891F
    ●  Automatic rate selection for 802.11a/g/n
    ●  Noncaptive RPTNC omnidirectional dipole antennae; 2-dBi gain @ 2.4 GHz, 5-dBi gain @ 5 GHz
    ●  2 x 3 multiple input, multiple output (MIMO) radio operation
    ●  Wi-Fi 802.11n Draft v2.0 certified

     

    WLAN software features

    ●  Autonomous or unified access point
    ●  Cisco WCS support for monitoring of autonomous-mode access points
    ●  Option to maximize throughput or maximize range
    ●  Software-configurable transmit power
    ●  Radio roles, including access point, root bridge, nonroot bridge, and workgroup bridge
    ●  Wi-Fi Multimedia (WMM) certification
    ●  Traffic specifications (TSPEC) Call Admission Control (CAC) to ensure voice quality is maintained
    ●  Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency

     

    WLAN security features

    ●  Standard 802.11i
    ●  Wi-Fi Protected Access (WPA) and AES (WPA2)
    ●  EAP authentication: Cisco Light Extensible Authentication Protocol (LEAP), Protected Extensible Authentication Protocol (PEAP), Extensible Authentication Protocol Transport Layer Security (EAP TLS), Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST), Extensible Authentication Protocol-Subscriber Information Module (EAP-SIM), Extensible Authentication Protocol-Message Digest Algorithm 5 (EAP-MD5), and Extensible Authentication Protocol‑Tunneled TLS (EAP-TTLS)
    ●  Static and dynamic Wired Equivalent Privacy (WEP)
    ●  Temporal Key Integrity Protocol/Simple Security Network (TKIP/SSN) encryption
    ●  MAC authentication and filter
    ●  User database for survivable local authentication using LEAP and EAP-FAST
    ●  Configurable limit to the number of wireless clients
    ●  Configurable RADIUS accounting for wireless clients
    ●  Preshared keys (PSKs) (WPA-small office or home office [WPA-SOHO])

     

    Certifications

     

     

    Service Set Identifiers (SSIDs) and Multiple Broadcast SSIDs

    ●  16

     

    Wireless VLANs

    ●  14 (encrypted and nonencrypted VLANs)

     

    Default and maximum DRAM

    ●  512 and 768 MB, respectively, on Cisco 891 and 892 Series data models; upgrade option available
    ●  512 MB on Cisco 892F
    ●  Up to 1 GB on Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F, and 891-24X data models; upgrade option available

     

    Default and maximum flash memory

    ●  256 on all Cisco 890 ISR models; not upgradable

     

    WAN

    ●  Refer to Table 2 for details

     

    LAN switch

    ●  Refer to Table 2 for details

     

    Separate console and auxiliary ports

    ●  RJ-45

     

    USB 2.0

    ●  Two USB 2.0 ports available on Cisco 891, 892, and 892F models
    ●  One USB 2.0 port available on Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F, and 891-24X
    ●  USB devices supported:
    ◦   USB eTokens on Cisco 891, 892, and 892F only
    ◦   USB flash memory

    Note: USB 2.0 ports cannot be used for connecting external devices other than those specified at: http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html.

     

    ISDN BRI S/T

    ●  Refer to Table 2 for details

     

    Inline PoE

    ●  Optional internal adapter for inline PoE on 4 switch ports for IP phones or external wireless access points; 802.3af-compliant and Cisco PoE-compliant
    ●  No PoE support on Cisco 892FSP

     

    Wireless specifications

    ●  2.4 and 5 GHz

     

    Data rates supported

    ●  802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
    ●  802.11b: 1, 2, 5.5, 6, 9, and 11 Mbps
    ●  802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
    ●  802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and m0-m15

     

    Maximum transmit power (2‑channel aggregate)

    ●  802.11a: 15dBm
    ●  802.11b: 20 dBm
    ●  802.11g: 17 dBm
    ●  802.11n: 16 dBm

    Note: Maximum power setting is subject to change by channel and by region, depending on regulations.

     

    Physical dimensions and weight

    Weight: 5.5 lb (2.5 kg) maximum

    Product dimensions:

    Cisco 891, 892, and 892F:

    ●  Nonwireless models:
    ◦   H x W x D = 1.9 x 12.8 x 9.8 in. (4.8 x 32.5 x 24.9 cm) (includes rubber feet)
    ◦   H x W x D = 1.75 x 12.8 x 9.8 in. (4.5 x 32.5 x 24.9 cm) (without rubber feet)
    ●  Wireless models:
    ◦   H x W x D = 1.9 x 12.8 x 10.4 in. (4.8 x 32.5 x 26.4 cm) (includes rubber feet)
    ◦   H x W x D = 1.75 x 12.8 x 10.4 in. (4.5 x 32.5 x 26.4 cm) (without rubber feet; excludes antennas)
    ●  Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, and 891F:
    ◦   H x W x D =1.82 x 12.71 x 9.78 in. (4.62 x 32.28 x 24.84 cm) (includes rubber feet)
    ◦   H x W x D = 1.75 x 12.71 x 9.78 in. (4.45 x 32.28 x 24.84 cm) (without rubber feet)
    ●  Cisco 891-24X:
    ◦   H x W x D = 1.75 x 17.25 x 12 in. (4.62 x 43.81 x 30.48 cm) (includes rubber feet)
    ◦   H x W x D = 1.75 x 17.25 x 12 in. (4.45 x 43.81 x 30.48 cm) (without rubber feet)

     

    External power supply

    Product power specifications:

    ●  AC input voltage: Universal 100 to 240 VAC
    ●  Frequency: 50 to 60 Hz
    ●  Maximum output power: 60W
    ●  Output voltages: 12 VDC
    ●  Optional PoE:
    ◦   Separate 80W PoE power supply for Cisco 891 and 892 ISRs
    ◦   Single 125W power supply required for Cisco 896, 897, 898, and 891F for router and PoE
    ◦   The Cisco 891-24X uses the internal power supply for PoE
    ●  External output voltage: 48 VDC

     

    Approvals and compliance

    ●  Emission
    ●  47 CFR Part 15: 2006
    ◦   CISPR22: 2005
    ◦   EN300386: V1.3.3: 2005
    ◦   EN55022: 2006
    ◦   EN61000-3-2: 2000 [Inc amd 1 & 2]
    ◦   EN61000-3-3: 1995 [+ amd 1: 2001]
    ◦   ICES-003 Issue 4: 2004
    ◦   KN 22: 2005
    ◦   VCCI: V-3/2006.04
    ●  Immunity
    ●  CISPR24: 1997 [+ amd 1 & 2]
    ◦   EN300386: V1.3.3: 2005
    ◦   EN50082-1: 1992
    ◦   EN50082-1: 1997
    ◦   EN55024: 1998 [+ amd 1 & 2]
    ◦   EN61000-6-1: 2001

     

    Environmental operating range

    ●  Nonoperating temperature: -4 to 149°F (-0 to 65°C)
    ●  Nonoperating humidity: 5 to 95% relative humidity (noncondensing)
    ●  Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)
    ●  Operating temperature: 32 to 104°F (0 to 40°C)
    ●  Operating humidity: 10 to 85% relative humidity (noncondensing)
    ●  Operating altitude: 0 to 10,000 ft (0 to 3000m)

     

    Ordering Information

    Table 4 lists the part numbers and Cisco IOS Software and WLAN software image details for each of the 890 Series ISR models. To place an order, visit the Cisco Ordering Home Page. To download software, visit the Cisco Software Center.

    Table 4.       Product Part Numbers and Software Images

    Product Part Number

    Product Description

    Integrated Services Routers

    CISCO891-K9

    Cisco 891 Gigabit Ethernet security router

    CISCO891W-AGN-A-K9

    Cisco 891W Gigabit Ethernet security router with802.11n, FCC compliant

    CISCO891W-AGN-N-K9

    Cisco 891W Gigabit Ethernet security router with802.11n, Australia compliant

    CISCO892-K9

    Cisco 892 Gigabit Ethernet security router

    CISCO892W-AGN-E-K9

    Cisco 892W Gigabit Ethernet security router with802.11n, ETSI compliant

    CISCO892F-K9

    Cisco 892 Gigabit Ethernet security router with SFP

    CISCO892FW-A-K9

    Cisco 892 Gigabit security router with SFP and 802.11n, FCC compliant

    CISCO892FW-E-K9

    Cisco 892 Gigabit security router with SFP and 802.11n, ETSI compliant

    C892FSP-K9

    Cisco 892FSP Gigabit Ethernet security router with SFP

    C896VA-K9

    Cisco 896VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex B

    C897VA-K9

    Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A

    C897VAW-A-K9

    Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A with Wireless

    C897VAW-E-K9

    Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A with Wireless

    C897VA-M-K9

    Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex M

    C897VAM-W-E-K9

    Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex M with Wireless

    C897VAB-K9

    Cisco 897VA Gigabit Ethernet security router with SFP and VDSL2/ADSL2+ Bonding over POTS

    C898EA-K9

    Cisco 898EA Gigabit Ethernet security router with SFP and 4 channel multimode G.SHDSL (EFM/ATM)

    C891F-K9

    Cisco 891F Gigabit Ethernet security router with SFP

    C891-24X/K9

    Cisco 891 Gigabit Ethernet security router with SFP and 24-ports Ethernet Switch

    C891FW-A-K9

    Cisco 891F Gigabit Ethernet security router with SFP and Dual Radio 802.11n Wifi for FCC -A domain

    C891FW-E-K9

    Cisco 891F Gigabit Ethernet security router with SFP and Dual Radio 802.11n Wifi for ETSI -E domain

    * Cisco 892FSP is supported only on Cisco IOS Software Release 15.2(4)M and later

    Cisco 896, 897, 898EA is supported only on Cisco IOS Software Release 15.2(4)M1 and later

    Cisco 891F is supported only on Cisco IOS Software Release 15.3(3)M2, 15.4(1)T and later

    C897VAB is supported only on Cisco IOS Software Release 15.4(3)M1 and later

    C891-24X is supported only on Cisco IOS Software Release 15.5(1)T and later

    Memory Options

    MEM8XX-512U768D

    512 MB DRAM upgrade to 768 MB for Cisco 891 and 892 models

    MEM8XX-512U1GBD

    512 MB DRAM upgrade to 1 GB for Cisco 892F

    FL-8XX-512U1GB

    512 MB DRAM upgrade to 1 GB for Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F model (Feature License)

    Router Software Images

    Image

    C890-universalk9-mz: Universal image for Cisco 891, Cisco 892 and Cisco 892F

    C800-universalk9-mz: Universal image for Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F

    Access Point Software Images

    ap801-k9w7-tar

    Autonomous software image for ap801

    ap801-rcvk9w8-tar

    Lightweight Access Point Protocol (LWAPP) recovery image for ap801

    ap802-k9w7-tar

    Autonomous software image for ap802

    ap802-rcvk9w8-tar

    Lightweight Access Point Protocol (LWAPP) recovery image for ap802

    Power over Ethernet Options

    800-IL-PM-4 with 80W PSU

    4-port 802.3af capable internal power module for Cisco 891, Cisco 892, Cisco 892F routers

    800-IL-PM-4 with 125W PSU

    4-port 802.3af capable internal power module for C896, C897, C898, C891F routers

    Security Services

    Scan SafeCloud Web Security

    ScanSafe Connector

    http://www.cisco.com/en/US/prod/vpndevc/ps6525/ps6538/ps6540/isr_web_security.html.

    SSL

    FL-SSLVPN25-K9

    Feature license SSLVPN for up to 25 users (incremental), for 15.x based Cisco IOS Software releases only

    Supported SFP Types on the Cisco 892F Series and Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F

    GLC-LH-SM

    1000BASE-LX/LHSFP transceiver module for MMF and SMF, 1300-nm wavelength, dual LC/PC connector

    GLC-SX-MM

    1000BASE-SXSFP transceiver module for MMF, 850-nm wavelength, dual LC/PC connector

    GLC-ZX-SM

    1000BASE-ZXSFP transceiver module for SMF, 1550-nm wavelength, dual LC/PC connector

    GLC-BX-D

    1000BASE-BX10SFP module for single-strand SMF, 1490-nm TX/1310-nm RX wavelength, single LC/PC connector

    GLC-BX-U

    1000BASE-BX10SFP module for single-strand SMF, 1310-nm TX/1490-nm RX wavelength, single LC/PC connector

    GLC-T

    1000BASE-T standard

    GLC-GE-100FX

    Cisco 100BASE-FX SFP for Gigabit Ethernet SFP ports with multimode fiber-optic (MMF) link

    GLC-FE-100LX

    Cisco 100BASE-LX10SFP with single-mode fiber-optic (SMF) link

    GLC-FE-100BX-U

    100BASE-BX10-U SFP module for 100-MB ports, 1310 nm TX/1550 nm RX wavelength, 10 km over single-strand SMF

    GLC-FE-100BX-D

    100BASE-BX10-D SFP module for 100-MB ports, 1550 nm TX/1310 nm RX wavelength, 10 km over single-strand SMF

    CWDM-SFP-1470=

    Cisco Coarse-Wavelength Division Multiplexing (CWDM) 1470-nm SFP Gigabit Ethernet and 1G/2G fibre Channel

    GLC-LH-SMD*

    1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength

    GLC-ZX-SMD*

    1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength, dual LC/PC connector

    GLC-EX-SMD*

    1000BASE-EX SFP transceiver module for SMF, 1310-nm wavelength

    *Not supported on the Cisco 892F

    Rack Mount Kit for 890

    ACS-890-RM-19

    Rackmount kit for all 890s, except C891-24X

    ACS-2901-RM-19

    Rackmount kit for 891-24X

    WAASX Feature License

    FL-C890-WAASX

    WAASx Feature License

    Additional Information

    SKU CISCO891-K9-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/800-series-routers/data_sheet_c78-519930.html
    Condition Refresh
    Router Series 800 Series
    Chassis Type Fixed
    Rack Mountable Yes
    Built In Ports 8
    Port Speed 100 Mbps
    Port Type RJ45

    CISCO891-K9-RF

    AED

    AED 0

    0