CIVS-IPC-2600-RF

Double click on above image to view full picture

Zoom Out
Zoom In

CIVS-IPC-2600-RF

Description:

Cisco Refurbished
Original Part No : CIVS-IPC-2600

Cisco 2600 IP Camera,FullResolution,Day/Night REMANUFACTURED
AED 1,411

Availability: Out of stock


Not Available

  • Add to Compare
  • Details

    The Cisco® Video Surveillance 2600 IP Camera is a high-resolution, feature-rich digital camera designed to provide superior performance in a wide variety of video surveillance applications. The camera employs H.264 compression and streams 30 frames per second (fps) at D1 NTSC resolution (720 x 480) or 25 fps at D1 PAL resolution (720 x 576), offering efficient network utilization while providing high-quality video. With its open, standards-based design, the camera provides an ideal platform for integration, and operation as an independent device or as part of a Cisco Video Surveillance network.

    Figure 1 shows the Cisco Video Surveillance 2600 IP Camera.

    Figure 1. Cisco 2600 IP Camera Shown with Optional DC Auto Iris Lens

    fig_01.jpg
    The Cisco Video Surveillance 2600 IP Camera offers a variety of benefits, including:

    • Optimal imaging efficiency. The 2600 IP Camera can stream video using H.264 compression, reducing network traffic and storage requirements while providing superior image quality.

    • Wide dynamic range. The camera employs powerful digital imaging technology, allowing it to capture high-quality images in a wide variety of lighting conditions. It uses a progressive scan image sensor with global electronic shuttering to ensure natural color rendition, zero blooming and smear and minimal motion blurring.

    • Dual streaming. The camera can deliver two simultaneous video streams over the network. A combination of H.264, MPEG4, and MJPEG can be configured. Each video stream can be configured with individual resolution, quality and frame rate settings.

    • Day/night operation. The camera provides true day/night functionality that includes an IR filter that can automatically switch to night mode in low light scenes. This function can be set to manual or automatic control.

    • Flexible power options. The 2600 IP Camera supports Power over Ethernet (PoE) 802.3af or DC power through an optional external power supply.

    • Embedded security and networking. The camera provides 802.1X authentication and supports IP Multicast for enhanced bandwidth management.

    • Event notification. The camera can examine designated areas in the video for motion activity and then notify users or other applications when it detects activity that exceeds a predefined threshold.

    • Mounting options. The camera can be installed with a fixed-mount or with an optional external pan/tilt mount and motorized zoom lens.

    • Bidirectional audio.* The camera supports full-duplex audio and options for half-duplex operation.

    Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

    Features

    Table 1 describes the features of the Cisco Video Surveillance 2600 IP Camera.

    Table 1. Cisco Video Surveillance 2600 IP Camera Features

     

     

    Item

    Specification

    Imaging Device

    1/3-in. progressive-scan CMOSsensor with wide dynamic range

    Image Control

    Automatic white balance (AWB), automatic gain control (AGC), automatic exposure (AE), auto/manual iris

    Dynamic Range

    102 dBtypical/120 dB maximum

    Minimum Illumination

    • Color mode: F1.4 @ 0.65 lux
    • Black and white mode: F1.4 @ 0.08 lux

    Signal-to-Noise Ratio (SNR)

    >48 dB

    Lens Selection

    Accepts manual or DC auto iris lens

    Lens Mount

    CS mount

    Shutter Speed

    Electronic Shutter

    Video Compression

    H.264, MPEG-4, MJPEG

    Audio Compression*

    G.711 A-Law, G.711 U-Law, G.726

    Resolution and Frame Rate

    NTSC/PAL

    • 720 x 480/576 @ 30/25 fps (D1)
    • 704 x 480/576 @ 30/25 fps (4CIF)
    • 352 x 240/288 @ 30/25 fps (CIF)

    Video Streaming

    Single and dual video streams supported. Refer to Tables 2, 3, and 4 for details.

    Protocols

    Dynamic Host Control Protocol (DHCP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP), Secure HTTP (HTTPS), Network Time Protocol (NTP), Real-Time Transport Protocol (RTP), Real-Time Streaming Protocol (RTSP), Simple Mail Transfer Protocol (SMTP), Secure Sockets Layer/Transport Layer Security (SSL/TLS), Transmission Control Protocol/Internet Protocol (TCP/IP)

    Quality of Service (QoS)

    Differentiated services code point (DSCP) marking

    Power

    12 VDC

    PoE (802.3af) @ 48V/0.3A

    Power Consumption

    11W (max)

     

    Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

    Table 2 lists supported single stream configurations on the Cisco Video Surveillance 2600 IP Camera.

    Table 2. Supported Single Stream Configurations

     

     

    Single Streaming

    Maximum Resolution and Frames Per Second (FPS)

    Resolutions Supported
    (NTSC & PAL)

    NTSC

    FPS Supported

    PAL FPS Supported

    H.264

    D1 @ 30 fps

    D1

    4CIF

    CIF

    30, 25, 20, 15, 10, 8, 6, 5

    25, 20, 15, 10, 8, 6, 5

    MPEG-4

    D1 @ 30 fps

    D1

    4CIF

    CIF

    30, 25, 20, 15, 10, 8, 6, 5

    25, 20, 15, 10, 8, 6, 5

    MJPEG

    D1 @ 30 fps

    D1

    4CIF

    CIF

    30, 25, 20, 15, 10, 8, 6, 5

    25, 20, 15, 10, 8, 6, 5

     

    Table 3 lists the supported primary and secondary video stream combinations on the Cisco Video Surveillance 2600 IP Camera.

    Table 3. Supported Primary and Secondary Video Stream Combinations

     

     

    Primary

    Secondary

    H.264

    H.264

    H.264

    MJPEG

    MPEG4

    MPEG4

    MPEG4

    MJPEG

     

    Table 4 lists the supported primary and secondary video streams on the Cisco Video Surveillance 2600 IP Camera.

    Table 4. Cisco Video Surveillance 2600 IP Camera Video Stream Support

     

     

    NTSC Primary 
    Channel Resolutions

    NTSC Primary Frame Rate

    NTSC Secondary 
    Channel Resolutions

    NTSC Secondary Frame Rate*

    4 CIF, CIF

    30, 25, 20, 15, 10, 8, 6, 5

    CIF

    15, 10, 8, 6, 5

    PAL Primary 
    Channel Resolutions

    PAL Primary Frame Rate

    PAL Secondary 
    Channel Resolutions

    PAL Secondary Frame Rate*

    4 CIF, CIF

    25, 20, 15, 10, 8, 6, 5

    CIF

    15, 10, 8, 6, 5

     

    Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

    Connectors

    Table 5 describes the connectors on the Cisco Video Surveillance 2600 IP Camera.

    Table 5. Cisco Video Surveillance 2600 IP Camera Connectors

     

     

    Item

    Specification

    Network connectivity

    10/100 BASE-TX Ethernet with RJ-45 connector

    Video

    1 analog output BNC connector, 75 ohms

    Audio*

    • 1, 3.5-mm output jack for optional external speaker
    • 1, 3.5-mm input jack for optional external microphone
    • Built-in microphone
    • Two-way (full- and half-duplex), one-way, or audio off

    Serial port

    RS-485 (2-wire), Pelco D protocol only

    Alarm input

    2, logic-level programmable

    Alarm output*

    2, logic-level programmable

    Power input

    2-pin terminal

     

    Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

    Software

    Table 6 describes the primary features of the Cisco Video Surveillance 2600 IP Camera software.

    Table 6. Cisco Video Surveillance 2600 IP Camera Primary Software Features

     

     

    Item

    Specification

    Video Format

    NTSC and PAL

    Day/night Settings

    Auto or manual day/night operation with user-definable thresholds

    Image Settings

    Configurable brightness, sharpness, saturation, and white balance

    Overlay Capabilities

    Time, date, and text

    Selectable Bit Rate

    Support for Constant Bit Rate or Variable Bit Rate

    IP Filtering

    Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings

    Discovery*

    Cisco Discovery Protocol, Bonjour zero-configuration discovery

    Configuration

    • Browser-based using Internet Explorer 8
    • Multiple user access levels with password protection

    Activity Detection

    4 user-definable motion detection areas

    Event Actions

    • Email
    • FTP upload of captured video or JPEG snapshot depending on stream configuration
    • HTTP alert
    • Alarm output

     

    Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

    Specifications

    Table 7 provides specifications of the Cisco Video Surveillance 2600 IP Camera.

    Table 7. Cisco Video Surveillance 2600 IP Camera Specifications

     

     

    Item

    Specification

    Housing

    Aluminum

    LEDs

    Power, Ethernet link, and activity

    Dimensions 
    (L x W x H)

    • 4.96 x 3.15 x 2 in.
    • 126 x 80 x 50 mm

    Weight

    • 1.15 lb
    • 0.52 kg

    Certifications

    Safety:

    IEC 60950-1:2001

    EN 60950-2:2001 +A11:2004

    EMC-Emissions:

    FCC Part 12 Subpart B, Class B

    CISPR22 Class B

    ICES-003, Class B

    ANSI C63.4

    EN55022: Class B

    EN61000-3-2

    EN61000-3-3

    EMC-Immunity:

    EN55024

    EN61000-4-2

    EN61000-4-3

    EN61000-4-4

    EN61000-4-5

    EN61000-4-6

    EN61000-4-8

    EN61000-4-11

    Operating Temperature

    • 32 to 122°F
    • 0 to 50°C

     

    Figure 2 shows the dimensions of the Cisco Video Surveillance 2600 Series IP Camera.

    Figure 2. Cisco Video Surveillance 2600 IP Camera Dimensions

    fig_02.jpg

    Package Contents

    Table 8 describes the items that ship with the Cisco Video Surveillance 2600 IP Camera.

    Table 8. Package Contents

     

     

    Item

    Cisco Video Surveillance 2600 Series IP Camera

    Lens opening dust cap, mounting hole protector, terminal block for power connection, C mount lens adaptor, 0.9-mm Allen wrench, snap-on ferrite core (x2).

    Regulatory compliance and safety information

    Quick start guide

     

    Availability

    The Cisco Video Surveillance 2600 IP Camera is available through Cisco Authorized Technology Provider (ATP) Partners.

    Ordering Information

    Table 9 lists the part numbers for the Cisco Video Surveillance 2600 IP Camera and for the lenses that the camera supports.

    Table 9. Ordering Information

     

     

    Part Number

    Description

    CIVS-IPC-2600

    Cisco Video Surveillance 2600 IP Camera, Full Resolution, Day/Night

    Lenses

    CIVS-IPC-VT38

    Cisco IP Camera Tamron 3-8 mm Varifocal Lens

    CIVS-IPC-VT31

    Cisco IP Camera Tamron 3-11 mm Varifocal Lens

    CIVS-IPC-VT55

    Cisco IP Camera Tamron 5-50 mm Varifocal Lens

    CIVS-IPC-VF38

    Cisco IP Camera Fujinon 3-8 mm Varifocal Lens

    CIVS-IPC-VF31

    Cisco IP Camera Fujinon 3-11 mm Varifocal Lens

    CIVS-IPC-VF55

    Cisco IP Camera Fujinon 5-50 mm Varifocal Lens

     

    Using the Camera with Cisco Video Surveillance Manager

    Features that are marked with an asterisk (*) are not supported when using the camera with Cisco Video Surveillance Manager. Please refer to the latest release notes for Cisco Video Surveillance Manager for more information.

    Service and Support

    Cisco offers a wide range of services programs to accelerate customer success. These innovative programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, visitCisco Technical Support Services or Cisco Advanced Services.

    For More Information

    For more information about Cisco Video Surveillance solutions, visit http://www.cisco.com/en/US/products/ps6712/index.html or contact your local account representative.

    Additional Information

    SKU CIVS-IPC-2600-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/physical-security/video-surveillance-2600-series-ip-cameras/datasheet_c78-621352.html
    Condition Refresh
    Module Type Cisco Telepresence - CAMERA

    CIVS-IPC-2600-RF

    AED

    AED 1,411

    0