Details
The Cisco® Video Surveillance 2611 Standard-Definition IP Dome is a feature-rich digital IP camera designed to provide superior performance in a wide variety of video surveillance applications. The camera employs H.264 compression of up to 30 frames per second (fps) at D1 NTSC resolution (720 x 480) or 25 fps at D1 PAL resolution (720 x 576), offering efficient network utilization while providing high-quality video. This flush-mount dome is designed to be deployed indoors. With its open, standards-based design, the camera provides an ideal platform for operation as an independent device or as part of a Cisco Video Surveillance network.
Figure 1. Cisco Video Surveillance 2611 IP Dome
• Optimal imaging efficiency. The 2611 IP Dome can stream video using H.264 compression, reducing network traffic and storage requirements while providing superior image quality.
• Motorized focus and zoom. The lens on the 2611 IP Dome allows the focus and zoom to be controlled remotely, greatly simplifying installations and field of view adjustments.
• Wide dynamic range. The camera employs powerful digital imaging technology, allowing it to capture high-quality images in a wide variety of lighting conditions. It uses a progressive scan image sensor with global electronic shuttering to ensure natural color rendition, zero blooming and smear, and minimal motion blurring.
• Dual streaming. The camera can deliver two simultaneous video streams over the network. A combination of H.264, MPEG4, and MJPEG can be configured. Each video stream can be configured with individual resolution, quality, and frame rate settings.
• Flexible power options. The camera supports Power over Ethernet (PoE) 802.3af, and 12 VDC or 24 VAC power through an optional external power supply.
• Mounting options. The camera is designed for internal ceiling tile mount deployments. The camera is equipped with a varifocal motorized lens mounted to a manual pan and tilt mechanism that allows the camera to be rotated and placed at the proper angle.
• Dome options. The 2611 IP Dome comes standard with a smoked dome. A clear dome is available as an optional accessory.
• Day/night operation. The camera provides true day/night operation and includes an IR filter that switches to night mode in low-light scenes. This function can be set to manual or automatic control.
• Embedded security and networking. The camera provides 802.1X authentication and supports IP Multicast for enhanced bandwidth management.
• Event notification. The camera can examine designated areas in the video for motion activity and then notify users or other applications when it detects activity that exceeds a predefined threshold.
• Bidirectional audio.* The camera supports full-duplex audio, and options for half-duplex operation.
Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Features
Table 1. Cisco Video Surveillance 2611 IP Dome Features
|
Item |
Specification |
|
Imaging Device |
1/3-in. progressive-scanRGB CMOSsensor with wide dynamic range |
|
Image Control |
Automatic white balance (AWB), automatic gain control (AGC), automatic exposure (AE), auto iris |
|
Dynamic Range |
102 dBtypical/120 dB maximum |
|
Minimum Illumination |
• Color mode: F1.4 @ 0.65 lux
• Black and white mode: F1.4 @ 0.08 lux
|
|
Signal-to-Noise Ratio (SNR) |
>48 dB |
|
Shutter |
Electronic shutter |
|
Lens |
Motorized DC auto-iris lens with day/night filter 3.3mm-12mm Zoom: 3.6x Field of view: Horizontal: 24°-90° Vertical: 18°-64° |
|
Camera Angle Adjustment |
Pan: 340° Tilt: 160° Rotation: 200° |
|
Video Compression |
H.264, MPEG-4, MJPEG |
|
Audio Compression* |
G.711 A-Law, G.711 U-Law, G.726 |
|
Resolution and Frame Rate |
NTSC/PAL • 720 x 480/576 @ 30/25 fps (D1)
• 704 x 480/576 @ 30/25 fps (4CIF)
• 352 x 240/288 @ 30/25 fps (CIF)
|
|
Video Streaming |
Single and dual video streams supported. Refer to Tables 2, 3, and 4 for details. |
|
Protocols |
Dynamic Host Control Protocol (DHCP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP), Secure HTTP (HTTPS), Network Time Protocol (NTP), Real-Time Transport Protocol (RTP), Real-Time Streaming Protocol (RTSP), Simple Mail Transfer Protocol (SMTP), Secure Sockets Layer/Transport Layer Security (SSL/TLS), Transmission Control Protocol/Internet Protocol (TCP/IP) |
|
Quality of Service (QoS) |
Differentiated services code point (DSCP) marking |
|
Power |
12 VDC PoE (802.3af) @ 48V/0.3A |
|
Power Consumption |
11W (max) |
Table 2. Supported Single Stream Configurations
|
Single Streaming |
Maximum Resolution and Frames Per Second (FPS) |
Resolutions Supported |
NTSC FPS Supported |
PAL FPS Supported |
|
H.264 |
D1 @ 30 fps |
D1 4CIF CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
|
MPEG-4 |
D1 @ 30 fps |
D1 4CIF CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
|
MJPEG |
D1 @ 30 fps |
D1 4CIF CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
Table 3. Supported Primary and Secondary Video Stream Combinations
|
Primary |
Secondary |
|
H.264 |
H.264 |
|
H.264 |
MJPEG |
|
MPEG4 |
MPEG4 |
|
MPEG4 |
MJPEG |
Table 4. Cisco Video Surveillance 2611 IP Dome Video Stream Support
|
NTSC Primary |
NTSC Primary Frame Rate |
NTSC Secondary |
NTSC Secondary Frame Rate* |
|
4 CIF, CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
CIF |
15, 10, 8, 6, 5 |
|
PAL Primary |
PAL Primary Frame Rate |
PAL Secondary |
PAL Secondary Frame Rate* |
|
4 CIF, CIF |
25, 20, 15, 10, 8, 6, 5 |
CIF |
15, 10, 8, 6, 5 |
Connectors
Table 5. Cisco Video Surveillance 2611 IP Dome Connectors
|
Item |
Specification |
|
Network Connectivity |
10/100 BASE-TX Ethernet with RJ-45 connector |
|
Video |
3.5-mm service connector, provides analog video (use with optional mini cable with BNC adapter during installation) |
|
Power Input |
3-pin terminal |
|
Audio* |
• 3.5-mm audio jack: audio input for optional external microphone and audio output for optional external speaker supported through Y-cable adapter
• Two-way (full- and half-duplex), one-way, or audio off
|
|
Alarm Input |
Two logic-level programmable inputs |
|
Alarm Output* |
Two logic-level programmable outputs |
Software
Table 6. Cisco Video Surveillance 2611 IP Dome Primary Software Features
|
Item |
Specification |
|
Video Format |
NTSC and PAL |
|
Day/night Settings |
Auto or manual day/night operation with user-definable thresholds |
|
Image Settings |
Configurable brightness, sharpness, saturation, and white balance |
|
Overlay Capabilities |
Time, date, and text |
|
Selectable Bit Rate |
Support for Constant Bit Rate or Variable Bit Rate |
|
IP Filtering |
Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings |
|
Discovery* |
Cisco Discovery Protocol, Bonjour zero-configuration discovery |
|
Configuration |
• Browser-based using Internet Explorer 8 with SP3
• Multiple user access levels with password protection
|
|
Motion Detection |
4 user-definable motion detection areas |
|
Event Actions |
• Email
• FTP upload of captured video or JPEG snapshot depending on stream configuration
• HTTP alert
• Alarm output
|
Specifications
Table 7. Cisco Video Surveillance 2611 IP Dome Mechanical Specifications
|
Item |
Specification |
||
|
Housing |
Metal base and polycarbonate transparent cover |
||
|
LEDs |
Power and Ethernet |
||
|
Dimensions |
7.63 x 5.67 in. 194 x 144 mm |
||
|
Weight |
3.0 lb 1.37 kg |
||
|
Standards Compliance |
Safety: UL 60950 CAN/CSA-C22.2 No. 60950 EN 60950 IEC 60950 AS/NZS 60950 |
EMC-Emissions: 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR22 Class B CISPR22 Class B EN55022 Class B ICES003 Class B VCCI Class B EN61000-3-2 EN61000-3-3 KN22 Class B CNS13438 Class B |
EMC-Immunity: EN55024 CISPR24 EN50130-4 KN24 |
|
Operating Temperature |
0° to 45°C 32° to 113°F |
||
Figure 2. Cisco Video Surveillance 2611 Series IP Dome Dimensions
Package Contents
Table 8. Cisco Video Surveillance 2611 IP Dome Package Contents
|
Item |
|
Cisco Video Surveillance 2611IP Dome |
|
Quick start guide |
|
Regulatory compliance and safety information |
|
• 0.9-mm Allen wrench for locking/unlocking the lens focus ring
• Security wire and screw
|
Availability
Ordering Information
Table 9. Cisco Video Surveillance 2611 IP Dome Ordering Information
|
Part Number |
Description |
|
CIVS-IPC-2611 |
Cisco Video Surveillance Standard-Definition IP Dome, 3.3-12 mm, D/N, smoked, ceiling mount |
|
Accessories |
|
|
CIVS-IPCA-1008= |
Ceiling tile mount support, 2611 Series |
|
CIVS-IPCA-1017= |
Audio/video cable |
|
CIVS-IPCA-1019= |
Dome, Clear, 2611 Dome Series |
|
CIVS-IPCA-1020= |
Dome, Smoked, 2611 Dome Series |
Using the Camera with Cisco Video Surveillance Manager
Service and Support
For More Information
Additional Information
| SKU | CIVS-IPC-2611-RF |
|---|---|
| Weight (Kg) | 1 |
| Datasheet URL | http://www.cisco.com/c/en/us/products/collateral/physical-security/video-surveillance-2600-series-ip-cameras/data_sheet_c78-635605.html |
| Condition | Refresh |
| Module Type | Cisco Telepresence - CAMERA |
