CIVS-IPC-2630V-RF

Double click on above image to view full picture

Zoom Out
Zoom In

CIVS-IPC-2630V-RF

Description:

Cisco Refurbished
Original Part No : CIVS-IPC-2630V

CiscoRuggedized VR SD Dome,3.3-12mm,D/N,Clear REMANUFACTURED
AED 1,976

Availability: Out of stock


Not Available

  • Add to Compare
  • Details

    The Cisco ® Video Surveillance 2630V IP Dome is a feature-rich digital camera designed to provide superior performance in a wide variety of video surveillance applications and environments. The camera employs H.264 compression of up to 30 frames per second (fps) at D1 NTSC resolution (720 x 480) or 25 fps at D1 PAL resolution (720 x 576), offering efficient network utilization while providing high-quality video. This vandal-resistant dome can be deployed indoors or outdoors. With its open, standards-based design, the camera provides an ideal platform for operation as an independent device or as part of a Cisco Video Surveillance network.
    Figure 1 shows the Cisco Video Surveillance 2630V IP Dome.

    Figure 1. Cisco Video Surveillance 2630V IP Dome

    The Cisco Video Surveillance 2630V IP Dome offers a variety of benefits, including:

    • Optimal imaging efficiency. The 2630V IP Dome can stream video using H.264 compression, reducing network traffic and storage requirements while providing superior image quality.

    • Motorized focus and zoom. The lens on the 2630V IP Dome allows the focus and zoom to be controlled remotely, greatly simplifying installations and field of view adjustments.

    • Wide dynamic range. The camera employs powerful digital imaging technology, allowing it to capture high-quality images in a wide variety of indoor and outdoor lighting conditions. It uses a progressive scan image sensor with global electronic shuttering to ensure natural color rendition, zero blooming and smear, and minimal motion blurring.

    • Dual streaming. The camera can deliver two simultaneous video streams over the network. A combination of H.264, MPEG4, and MJPEG can be configured. Each video stream can be configured with individual resolution, quality, and frame rate settings.

    • Outdoor mounting options. When used outdoors, the camera must be mounted using a separate conduit base accessory (CIVS-IPCA-1006=) or pendant cap accessory (CIVS-IPCA-1010=) for IP66 protection. The camera is equipped with a motorized varifocal motorized lens mounted to a manual pan and tilt mechanism that allows the camera to be rotated and placed at the proper angle.

    • Dome options. The 2630V IP Dome comes standard with a clear dome. A smoked dome is available as an optional accessory.

    • Day/night operation. The camera provides true day/night operation and includes an IR filter that switches to night mode in low-light scenes. This function can be set to manual or automatic control.

    • Fan/heater operation. The camera includes a fan and heater unit that automatically maintains a desirable internal temperature, allowing the camera to operate in outdoor conditions.

    • Embedded security and networking. The camera provides 802.1X authentication and supports IP Multicast for enhanced bandwidth management.

    • Event notification. The camera can examine designated areas in the video for motion activity and then notify users or other applications when it detects activity that exceeds a predefined threshold.

    • Bidirectional audio.* The camera supports full-duplex audio, and options for half-duplex operation.

    Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

    Features

    Table 1 describes the features of the Cisco Video Surveillance 2630V IP Dome.

    Table 1. Cisco Video Surveillance 2630V IP Dome Features

     

     

    Item

    Specification

    Imaging Device

    1/3-in. progressive-scanRGB CMOSsensor with wide dynamic range

    Image Control

    Automatic white balance (AWB), automatic gain control (AGC), automatic exposure (AE), auto iris

    Dynamic Range

    102 dBtypical/120 dB maximum

    Minimum Illumination

    • Color mode: F1.4 @ 0.65 lux
    • Black and white mode: F1.4 @ 0.08 lux

    Signal-to-Noise Ratio (SNR)

    >48 dB

    Shutter

    Electronic shutter

    Lens

    Motorized DC auto-iris lens with day/night filter

    3.3mm-12mm

    Zoom: 3.6x

    Field of view:

    • Horizontal: 24°-90°
    • Vertical: 18°-64°

    Camera Angle Adjustment

    Pan: 340°

    Tilt: 160°

    Rotation: 200°

    Video Compression

    H.264, MPEG-4, MJPEG

    Audio Compression*

    G.711 A-Law, G.711 U-Law, G.726

    Resolution and Frame Rate

    NTSC/PAL

    • 720 x 480/576 @ 30/25 fps (D1)
    • 704 x 480/576 @ 30/25 fps (4CIF)
    • 352 x 240/288 @ 30/25 fps (CIF)

    Video Streaming

    Single and dual video streams supported. Refer to Tables 2, 3, and 4 for details.

    Protocols

    Dynamic Host Control Protocol (DHCP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP), Secure HTTP (HTTPS), Network Time Protocol (NTP), Real-Time Transport Protocol (RTP), Real-Time Streaming Protocol (RTSP), Simple Mail Transfer Protocol (SMTP), Secure Sockets Layer/Transport Layer Security (SSL/TLS), Transmission Control Protocol/Internet Protocol (TCP/IP), 802.1x

    Quality of Service (QoS)

    Differentiated services code point (DSCP) marking

    Power Power

    24 VAC, isolated external power supply

    Power Consumption

    15W (maximum)

    When heater is on: 35W (maximum)

     

    * Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
    Table 2 lists supported single stream configurations on the Cisco Video Surveillance 2630V IP Dome.

    Table 2. Supported Single Stream Configurations

     

     

    Single Streaming

    Maximum Resolution and Frames Per Second (FPS)

    Resolutions Supported (NTSC & PAL)

    NTSC FPS Supported

    PAL FPS Supported

    H.264

    D1 @ 30 fps

    D1

    4CIF

    CIF

    30, 25, 20, 15, 10, 8, 6, 5

    25, 20, 15, 10, 8, 6, 5

    MPEG-4

    D1 @ 30 fps

    D1

    4CIF

    CIF

    30, 25, 20, 15, 10, 8, 6, 5

    25, 20, 15, 10, 8, 6, 5

    MJPEG

    D1 @ 30 fps

    D1

    4CIF

    CIF

    30, 25, 20, 15, 10, 8, 6, 5

    25, 20, 15, 10, 8, 6, 5

     

    Table 3 lists the supported primary and secondary video stream combinations on the Cisco Video Surveillance 2630V IP Dome.

    Table 3. Supported Primary and Secondary Video Stream Combinations

     

     

    Primary

    Secondary

    H.264

    H.264

    H.264

    MJPEG

    MPEG4

    MPEG4

    MPEG4

    MJPEG

     

    Table 4 lists the supported primary and secondary video streams on the Cisco Video Surveillance 2630V IP Dome.

    Table 4. Cisco Video Surveillance 2630V IP Dome Video Stream Support

     

     

    NTSC Primary Channel Resolutions

    NTSC Primary Frame Rate

    NTSC Secondary Channel Resolutions

    NTSC Secondary Frame Rate*

    4 CIF, CIF

    30, 25, 20, 15, 10, 8, 6, 5

    CIF

    15, 10, 8, 6, 5

    PAL Primary Channel Resolutions

    PAL Primary Frame Rate

    PAL Secondary Channel Resolutions

    PAL Secondary Frame Rate*

    4 CIF, CIF

    25, 20, 15, 10, 8, 6, 5

    CIF

    15, 10, 8, 6, 5

     

    * If a secondary frame rate is selected in Cisco Video Surveillance Manager that is not listed in the table, the camera will automatically use the closest frame rate.

    Connectors

    Table 5 describes the connectors on the Cisco Video Surveillance 2630V IP Dome.

    Table 5. Cisco Video Surveillance 2630V IP Dome Connectors

     

     

    Item

    Specification

    Network Connectivity

    10/100 BASE-TX Ethernet with RJ-45 connector

    Video

    3.5-mm service connector, provides analog video (use with optional mini cable with BNC adapter during installation)

    Audio*

    • 3.5-mm audio jack: audio input for optional external microphone and audio output for optional external speaker supported through Y-cable adapter
    • Two-way (full- or half-duplex), one-way, or audio off

    Alarm Input

    Two logic-level programmable inputs

    Alarm Output*

    Two logic-level programmable outputs

    Power Input

    3-pin terminal

     

    * Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

    Software

    Table 6 describes the primary features of the Cisco Video Surveillance 2630V IP Dome software.

    Table 6. Cisco Video Surveillance 2630V IP Dome Primary Software Features

     

     

    Item

    Specification

    Video Format

    NTSC and PAL

    Day/night Settings

    Auto or manual day/night operation with user-definable thresholds

    Image Settings

    Configurable brightness, sharpness, saturation, and white balance

    Overlay Capabilities

    Time, date, and text

    Selectable Bit Rate

    Support for Constant Bit Rate or Variable Bit Rate

    IP Filtering

    Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings

    Discovery*

    Cisco Discovery Protocol, Bonjour zero-configuration discovery

    Configuration

    • Browser-based using Internet Explorer 8 with SP3
    • Multiple user access levels with password protection

    Motion Detection

    4 user-definable motion detection areas

    Event Actions

    • Email
    • FTP upload of captured video or JPEG snapshot depending on stream configuration
    • HTTP alert
    • Alarm output

     

    * Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

    Specifications

    Table 7 provides specifications of the Cisco Video Surveillance 2630V IP Dome.

    Table 7. Cisco Video Surveillance 2630V IP Dome Mechanical Specifications

     

     

    Item

    Specification

    Housing

    Metal base and polycarbonate transparent cover with tamper-resistant mounting

    LEDs

    Power and Ethernet

    Dimensions

    (W x H)

    6.10 x 4.64 in.

    155 x 118 mm

    Weight

    3.1 lb

    1.4 kg

    Standards Compliance

    Safety:

    UL 60950

    CAN/CSA-C22.2 No. 60950

    EN 60950

    IEC 60950

    AS/NZS 60950

    EMC-Emissions:

    47CFR Part 15 (CFR 47) Class B

    AS/NZS CISPR22 Class B

    CISPR22 Class B

    EN55022 Class B

    ICES003 Class B

    VCCI Class B

    EN61000-3-2

    EN61000-3-3

    KN22 Class B

    CNS13438 Class B

    EMC-Immunity:

    EN55024

    CISPR24

    EN50130-4

    KN24

    Operating Temperature

    -30° to 55°C

    -22° to 131°F

    Heater and Fan

    Heater turns ON: Internal temperature falls below 5°C (41°F)

    Heater turns OFF: Internal temperature rises above 15°C (59°F)

    Fan turns ON: Internal temperature rises above 70°C (158°F)

    Fan turns OFF: Internal temperature falls below 60°C (140°F)

     

    Figure 2 shows the dimensions of the Cisco Video Surveillance 2630V IP Dome without the conduit case.

    Figure 2. Cisco Video Surveillance 2630V IP Dome Dimensions Without Included Conduit Case

    Package Contents

    Table 8 describes the items that ship with the Cisco Video Surveillance 2630V IP Dome.

    Table 8. Cisco Video Surveillance 2630V IP Dome Package Contents

     

     

    Item

    Cisco Video Surveillance 2630VIP Dome

    Quick start guide

    Regulatory compliance and safety information

    • Mounting template
    • 0.9-mm Allen wrench for locking/unlocking the lens focus ring
    • Torx security wrench for tamper-resistance screws
    • 8-32 x 5/16" screws (qty. 4)
    • Security wire and screw

     

    Availability

    The Cisco Video Surveillance 2630V IP Dome is available through Cisco Authorized Distributors.

    Ordering Information

    Table 9 lists the part numbers for the Cisco Video Surveillance 2630V IP Dome and accessories.

    Table 9. Cisco Video Surveillance 2630V IP Dome Ordering Information

     

     

    Part Number

    Description

    CIVS-IPC-2630V

    Indoor/Outdoor Cisco Standard-Definition IP Clear Dome, D/N, 2.8-10 mm, vandal-resistant

    Accessories

    CIVS-IPCA-1004=

    Dome, Clear, 2500 and 2600 Series

    CIVS-IPCA-1005=

    Dome, Smoked, 2500 and 2600 Series

    CIVS-IPCA-1006=

    Conduit base with extra gaskets, 2500 and 26xxV Series

    CIVS-IPCA-1007=

    Ceiling mount support

    CIVS-IPCA-1010=

    Pendant cap, 2500 and 26xxV Series

    CIVS-IPCA-1011=

    Wall mount for use with CIVS-IPCA-1010

    CIVS-IPCA-1012=

    Ceiling mount for use with CIVS-IPCA-1010

    CIVS-IPCA-1013=

    Pendant cap adapter (3/4" to 1.5" male NPT thread)

    CIVS-IPCA-1014=

    Round pole mount adapter for use with wall mount

    CIVS-IPCA-1017=

    Audio/video cables

    CIVS-IPCA-1018=

    Sun shield

     

    Using the Camera with Cisco Video Surveillance Manager

    Features that are marked with an asterisk (*) are not supported when using the camera with Cisco Video Surveillance Manager. Please refer to the latest release notes for Cisco Video Surveillance Manager for more information.

    Service and Support

    Cisco offers a wide range of services programs to accelerate customer success. These innovative programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, visitCisco Technical Support Services or Cisco Advanced Services.

    For More Information

    For more information about Cisco Video Surveillance solutions, visit http://www.cisco.com/en/US/products/ps6712/index.html or contact your local account representative.

    Additional Information

    SKU CIVS-IPC-2630V-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/physical-security/video-surveillance-2600-series-ip-cameras/data_sheet_c78-635608.html
    Condition Refresh
    Module Type Cisco Telepresence - CAMERA

    CIVS-IPC-2630V-RF

    AED

    AED 1,976

    0