CRS1-SIP-800-RF

Double click on above image to view full picture

Zoom Out
Zoom In

CRS1-SIP-800-RF

Description:

Cisco Refurbished
Original Part No : CRS1-SIP-800=

CRS-1 SPA Interface Processor Card REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 30000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco ® CRS-1 Carrier Routing System is the industry's first carrier router offering continuous system operation, unprecedented service flexibility, and system longevity. The Cisco CRS-1 is powered by Cisco IOS ® XR Software - a unique self-healing, distributed operating system designed for always-on operation while scaling system capacity up to 92 Tbps. The innovative system architecture combines the Cisco Silicon Packet Processor, the first programmable 40-Gbps application-specific integrated circuit (ASIC), with the Cisco Service Separation Architecture for unprecedented service flexibility and speed to service. The Cisco CRS-1 marks a new era in carrier IP Communications by powering the foundation for network and service convergence today while protecting investments for decades to come.
    The Cisco ® I-Flex design combines shared port adapters (SPAs) and SPA interface processors (SIPs), leveraging an extensible design that enables service prioritization for voice, video and data services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The I-Flex design maximizes connectivity options and offers superior service intelligence through programmable interface processors that deliver line-rate performance. I-Flex enhances speed-to-service revenue and provides a rich set of QoS features for premium service delivery while effectively reducing the overall cost of ownership This data sheet contains the specifications for the Cisco CRS-1 SPA Interface Processor-800 (Cisco CRS-1 SIP-800; refer to Figure 1).

    Figure 1. Cisco CRS-1 SIP-800 with SPAs

    Product Specifications

    Table 1 gives specifications of the Cisco CRS-1 SIP-800.

    Table 1. Product Specifications

     

     

    Feature

    Description

    Chassis Compatibility

    Compatible with all current Cisco CRS-1 and CRS-3 line-card chassis

    Software Compatibility

    Cisco IOS XR Software Release 3.2 or higher for CRS-1

    Cisco IOS XR Software Release 4.0.0 or later for CRS-3

    Interface Types

    Packet over SONET/SDH (POS)

    • OC-3c/STM-1c
    • OC-192c/STM-64c

    Gigabit Ethernet

    Port Density

    Six normal-height SPAs or three double-height SPAs or any combination in between

    Reliability and Availability

    Online insertion and removal (OIR) without affecting system traffic

    Network Management

    • Cisco IOS XR Software Command-Line Interface (CLI)
    • Simple Network Management Protocol (SNMP)
    • Extensible Markup Language (XML) interface
    • Cisco CRS-1 Craft Works Interface (CWI)

    Physical Dimensions

    • Occupies one physical-layer-interface-module (PLIM) slot on Cisco CRS-1 16- and 8-slot line card chassis
    • Weight: Minimum 5.8 lb (without any SPAs), Maximum 15 lb (with 6 SPAs)
    • Height: 20.6 in. (52.32 cm)
    • Depth: 11.2 in. (28.4 cm)
    • Width: 1.8 in. (4.57 cm)

    Power

    • 30W without any SPA
    • 150W with maximum SPA configuration

    Environmental Conditions

    • Storage temperature: -40 to 70°C (-40 to 158°F)
    • Operating temperature:
    • Normal: 5 to 40°C (41 to 104°F)
    • Short term: -5 to 50°C (23 to 122°F)
    • Relative humidity:
    • Normal: 5 to 85%
    • Short term: 5 to 90% but not to exceed 0.024 kg of water per kg of dry air

    Short term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in one year. (This refers to a total of 360 hours in any given year, but no more than 15 occurrences during that one-year period.)

     

    Approvals and Compliance

    Table 2 gives compliance information for the Cisco CRS-1 SIP-800.

    Table 2. Compliance and Agency Approvals

     

     

    Feature

    Description

    Safety Standards

    • UL/CSA/IEC/EN 60950-1
    • AS/NZS 60950

    EMI

    • FCC Class A
    • ICES 003 Class A
    • AS/NZS 3548 Class A
    • CISPR 22 (EN55022) Class A
    • VCCI Class A

    Immunity (basic standards)

    • IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air)
    • IEC/EN-61000-4-3: Radiated Immunity (10V/m)

    ETSI and EN

    • EN300 386: Telecommunications Network Equipment (EMC)
    • EN55022: Information Technology Equipment (Emissions)
    • EN55024: Information Technology Equipment (Immunity)
    • EN50082-1/EN-61000-6-1: Generic Immunity Standard

    Network Equipment Building System (NEBS)

    This product is designed to meet the following requirements (qualification in progress):

    • SR-3580: NEBS Criteria Levels (Level 3)
    • GR-1089-CORE: NEBS EMC and Safety
    • GR-63-CORE: NEBS Physical Protection

     

    Ordering Information

    To place an order, visit Cisco Ordering Home Page or refer to Table 3.

    Table 3. Ordering Information

     

     

    Product Part Number

    Product Name

    CRS1-SIP-800 (=)

    Cisco CRS-1 SPA Interface Processor-800

     

    Service and Support

    Cisco offers numerous innovative services programs to accelerate customer success. These programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, visit Cisco Technical Support Services or Cisco Advanced Services.

    For More Information

    For more information about the Cisco CRS-1 SIP-800, contact your local Cisco account representative or visit:http://www.cisco.com/go/crs

     

    Additional Information

    SKU CRS1-SIP-800-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/carrier-routing-system/product_data_sheet0900aecd80280a68.html
    Condition Refresh
    Module Type Shared Port Adapter

    CRS1-SIP-800-RF

    AED

    AED 0

    0