CWDM-GBIC-1530-RF

Double click on above image to view full picture

Zoom Out
Zoom In

CWDM-GBIC-1530-RF

Description:

Cisco Refurbished
Original Part No : CWDM-GBIC-1530=

1000BASE-CWDM 1530 nm GBIC (single mode only) REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 4995

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    OVERVIEW

    The Cisco ® Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
    The Cisco CWDM GBIC/SFP solution is a convenient and cost-effective solution for the adoption of Gigabit Ethernet and Fibre Channel in campus, data-center, and metropolitan-area access networks.
    The Cisco CWDM GBIC/SFP solution has two main components (Figure 1): a set of eight different pluggable transceivers (Cisco CWDM GBICs and Cisco CWDM SFPs), and a set of different Cisco CWDM passive multiplexer/demultiplexer or optical add/drop multiplexers (OADMs). A Cisco CWDM chassis enables rack-mounting up to two of the Cisco CWDM passives. Both the transceivers and the passive multiplexers are compliant with the ITU-T G.694.2 standard defined CWDM grid.

    Figure 1. Cisco CWDM GBIC/SFP Solution

    KEY FEATURES AND BENEFITS

    Scalability

    The Cisco CWDM GBIC/SFP solution helps enable the transport of up to eight channels (Gigabit Ethernet or Fibre Channel) over single-mode fiber strands.

    Easy Deployment and Flexible Implementation

    The Cisco CWDM GBIC (and Cisco CWDM SFP) fits into a standard GBIC (and SFP) port supporting the IEEE 802.3z standard on the supported Cisco Systems ® platforms. The Cisco CWDM OADM is passive and requires no power. Neither the Cisco CWDM GBIC (nor Cisco CWDM SFP) nor the Cisco CWDM passives requires configuration.
    The Cisco CWDM GBIC/SFP solution allows for a variety of network configurations-from multichannel point-to-point to hub and meshed-ring configurations.

    High Availability

    The Cisco CWDM GBIC/SFP solution takes advantage of a multichannel architecture and the inherent protection of ring architectures. The solution helps enable:

    • Use of Layer 2 and Layer 3 redundancy and failover mechanisms at the channel endpoints (Cisco CWDM GBIC/SFP) to build highly available links

    • Use of two-path link configurations in a ring architecture to provide protection from fiber cuts

    Investment Protection

    The Cisco CWDM GBIC/SFP solution helps enable enterprises and service providers to increase the bandwidth of an existing Gigabit Ethernet optical infrastructure without adding new fiber strands. The solution can be used in parallel with other Cisco GBIC and SFP devices on the same platform.

    DEPLOYMENT SCENARIOS

    Point-to-Point Configuration

    In a point-to-point configuration (Figure 2), two endpoints are directly connected through a fiber link. The Cisco CWDM GBIC/SFP solution helps enable customers to add or drop as many as eight channels (Gigabit Ethernet or Fibre Channel) into a pair of single-mode fiber strands. As a result, the need for additional fiber is minimized. Redundant point-to-point links are possible by adding or dropping redundant channels into a second pair of single-mode fiber strands.
    A single fiber point-to-point configuration also is possible (Figure 3). By using different wavelengths to transmit and receive signals, as many as four channels can be transported over a single fiber strand.
    The main applications for the architecture are enterprise campus links and service provider point-of-presence (POP) or hub interconnects across a metropolitan (metro) area.

    Figure 2. Point-to-Point Architecture (Dual-Fiber Link)

    Figure 3. Point-to-Point Architecture (Single-Fiber Link)

    Hub-and-Spoke (Ring) Configuration

    In a hub-and-spoke configuration (Figure 4), multiple nodes (spokes) are connected with a hub location through a ring of single-mode fiber. Each hub-node connection can consist of a single or multiple channels. Protection from fiber cuts in the ring is achieved by connecting the hub and nodes through both directions of the optical ring. Service provider metro access rings are the main applications for this architecture.

    Figure 4. Hub-and-Spoke (Ring) Architecture

    Mesh (Ring) Configuration

    Mesh deployments are a combination of hub-and-spoke and point-to-point or even multiple point-to-point connections in parallel on the same optical link. Deployment of the maximum eight wavelengths allows for different combinations of these scenarios.

    TECHNICAL SPECIFICATIONS

    Cisco CWDM GBICs

    The Cisco CWDM GBIC (Figure 5) is a hot-swappable input/output device that plugs into an 802.3z standards-compliant GBIC port or slot of a Cisco switch or router, linking the port with the fiber-optic network.

    Figure 5. Cisco CWDM GBICs

    Performance

    • 1.25 Gbps full-duplex links

    • Optical link budget of 30 decibels (dB)

    Platform Support

    The Cisco CWDM GBICs are supported across a variety of Cisco switches, routers, and optical transport devices. For more details, refer to the document Cisco CWDM GBIC Compatibility Matrix.

    Connectors and Cabling

    • Equipment: Standard GBIC interface

    • Network: Dual SC/PC connector

    Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported.

    Environmental Conditions and Power Requirements

    The operating temperature range is between 32 and 122°F (0 and 50°C); storage temperature range is between -40 and 185°F (-40 and 85°C). Table 1 provides the electrical power interface details, and Table 2 describes optical parameters.

    Table 1. Electrical Power Interface Data

     

     

    Parameter

    Symbol

    Minimum

    Typical

    Maximum

    Units

    Supply Current

    Is

     

    280

    350

    mA

    Maximum Voltage

    Vmax

       

    6

    V

    Surge Current

    ISurge

       

    400

    mA

    Input Voltage

    Vcc

    4.75

    5

    5.25

    V

     

    Optical Specifications

    Table 2. Optical Parameters

     

     

    Parameter

    Symbol

    Minimum

    Typical

    Maximum

    Units

    Notes and Conditions

    Transmitter Center Wavelength

    wavelengthc

    (x-4)

     

    (x + 7)

    nm

    Available center wavelengths are 1470, 1490, 1510, 1530, 1550, 1570, 1590, and 1610 nm

    Side-Mode Suppression Ratio

    SMSR

    30

       

    dB

     
    Transmitter Optical Output Power

    Pout

    +1.0

    +3.0

    +5.0

    dBm

    Average power coupled into single-mode fiber

    Receiver Optical Input Power (Bit error rate [BER] <10-12 with pseudo-random bit sequence [PRBS] 2-7-1)

    Pin

    -29.0

    -33.0

    -7.0

    dBm

    @ 1.25 Gbps, 140°F (60°C) case temperature

    Optical Input Wavelength

    wavelengthin

    1450

     

    1620

    nm

     
    Transmitter Extinction Ratio

    OMI

    9

       

    dB

     
    Dispersion Penalty at 100 km
         

    3

    dB

    @ 1.25 Gbps

     

    Note: Parameters are specified over temperature and at end of life unless otherwise noted.

    Note: When shorter distances of single-mode fiber are used, it may be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver:

    Warranty

    • Standard warranty: 90 days

    • Extended warranty (option): Cisco CWDM GBICs can be covered through a Cisco SMARTnet® support contract for the Cisco switch or router chassis

    Ordering Information

    Refer to Table 3 for details about ordering Cisco CWDM GBICs.

    Table 3. Cisco CWDM GBIC Product Information

     

     

    Product Number

    Description

    Color

    CWDM-GBIC-1470=

    Cisco 1000BASE-CWDM GBIC, 1470 nm

    Gray

    CWDM-GBIC-1490=

    Cisco 1000BASE-CWDM GBIC, 1490 nm

    Violet

    CWDM-GBIC-1510=

    Cisco 1000BASE-CWDM GBIC, 1510 nm

    Blue

    CWDM-GBIC-1530=

    Cisco 1000BASE-CWDM GBIC, 1530 nm

    Green

    CWDM-GBIC-1550=

    Cisco 1000BASE-CWDM GBIC, 1550 nm

    Yellow

    CWDM-GBIC-1570=

    Cisco 1000BASE-CWDM GBIC, 1570 nm

    Orange

    CWDM-GBIC-1590=

    Cisco 1000BASE-CWDM GBIC, 1590 nm

    Red

    CWDM-GBIC-1610=

    Cisco 1000BASE-CWDM GBIC, 1610 nm

    Brown

    CWDM-8GBIC-SET1=

    Set of four pairs of Cisco 1000BASE-CWDM GBICs

    2 gray, blue, yellow, or red

    CWDM-8GBIC-SET2=

    Set of four pairs of Cisco 1000BASE-CWDM GBICs

    2 violet, green, orange, or brown

     

    Regulatory and Standards Compliance

    • Compatible with 1000BASE-X standard as specified in IEEE 802.3z

    • Safety: Laser Class I 21CFR1040

    Cisco CWDM SFPs

    A Cisco CWDM SFP (Figure 6) is a hot-swappable input/output device that plugs into an SFP port or slot of a Cisco switch or router, linking the port with the fiber-optic network.
    The Cisco CWDM SFPs are multirate parts that support both Gigabit Ethernet and Fibre Channel (1 gigabit and 2 gigabit).

    Figure 6. Cisco CWDM SFPs

    Performance

    • Gigabit Ethernet 1.25 Gbps full-duplex links with an optical link budget of 29 dB

    • Fibre Channel 1.06 and 2.12 Gbps full-duplex links with an optical link budget of 28 dB

    Platform Support

    The Cisco CWDM SFPs are supported across a variety of Cisco switches, routers, and optical transport devices. For more details, refer to the document Cisco CWDM SFP Compatibility Matrix.

    Connectors and Cabling

    • Equipment: Standard SFP interface

    • Network: Dual LC/PC connector

    Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported.

    Environmental Conditions and Power Requirements

    • Operating temperature range: 32 to 122°F (0 to 50°C)

    • Storage temperature range: -40 to 185°F (-40 to 85°C)

    Table 4 describes the electrical power interface details, and Table 5 describes optical parameters.

    Table 4. Electrical Power Interface Data

     

     

    Parameter

    Symbol

    Minimum

    Typical

    Maximum

    Units

    Supply Current

    Is

     

    220

    300

    mA

    Surge Current

    ISurge

       

    +30

    mA

    Input Voltage

    Vmax

    3.1

    3.3

    3.5

    V

     

    Table 5. Optical Parameters

     

     

    Parameter

    Symbol

    Minimum

    Typical

    Maximum

    Units

    Notes and Conditions

    Transmitter Center Wavelength

    wavelengthc

    (x-4)

     

    (x + 7)

    nm

    Available center wavelengths are 1470, 1490, 1510, 1530, 1550, 1570, 1590, and 1610 nm

    Side-Mode Suppression Ratio

    SMSR

    30

       

    dB

     
    Transmitter Optical Output Power

    Pout

    0

     

    5.0

    dBm

    Average power coupled into single-mode fiber

    Receiver Optical Input Power (BER <10-12 with PRBS 2-7-1)

    Pin

    -28.0

     

    -7.0

    dBm

    @ 2.12 Gbps, 140°F (60°C) case temperature

    Receiver Optical Input Power (BER <10-12 with PRBS 2-7-1)

    Pin

    -29.0

     

    -7.0

    dBm

    @ 1.25 Gbps, 140°F (60°C) case temperature

    Receiver Optical Input Wavelength

    wavelengthin

    1450

     

    1620

    nm

     
    Transmitter Extinction Ratio

    OMI

    9

       

    dB

     
    Dispersion Penalty at 100 km
         

    3

    dB

    @ 2.12 Gbps

    Dispersion Penalty at 100 km
         

    2

    dB

    @ 1.25 Gbps

     

    Note: Parameters are specified over temperature and at end of life unless otherwise noted.

    Note: When shorter distances of single-mode fiber are used, it may be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver.

    Warranty

    • Standard warranty: 90 days

    • Extended warranty (option): Available under a Cisco SMARTnet support contract for the Cisco switch or router chassis

    Ordering Information

    Refer to Table 6 for details about ordering Cisco CWDM SFPs.

    Table 6. Cisco CWDM SFP Product Information

     

     

    Product Number

    Description

    Color

    CWDM-SFP-1470=

    Cisco CWDM 1470-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel

    Gray

    CWDM-SFP-1490=

    Cisco CWDM 1490-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel

    Violet

    CWDM-SFP-1510=

    Cisco CWDM 1510-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel

    Blue

    CWDM-SFP-1530=

    Cisco CWDM 1530-nm SFP; Gigabit Ethernet and 1 and 2-Gb Fibre Channel

    Green

    CWDM-SFP-1550=

    Cisco CWDM 1550-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel

    Yellow

    CWDM-SFP-1570=

    Cisco CWDM 1570-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel

    Orange

    CWDM-SFP-1590=

    Cisco CWDM 1590-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel

    Red

    CWDM-SFP-1610=

    Cisco CWDM 1610-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel

    Brown

     

    Regulatory and Standards Compliance

    • Compliant with the ITU-T G.694.2 CWDM grid

    • Compatible with 1000BASE-X standard as specified in IEEE 802.3z

    • Compatible with Fibre Channel Draft Physical Interface Specification (FC-PI 10.0)

    • Safety: Laser Class I 21CFR1040

    ORDERING INFORMATION

    To place an order, visit the Cisco Ordering Home Page.

    SERVICE AND SUPPORT

    Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced Services.

    FOR MORE INFORMATION

    For more information about the Cisco CWDM products, visithttp://www.cisco.com/en/US/products/hw/modules/ps4999/products_data_sheet09186a00801a557c.html or contact your local Cisco account representative.

    Additional Information

    SKU CWDM-GBIC-1530-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/cwdm-transceiver-modules/product_data_sheet09186a00801a557c.html
    Condition Refresh
    Speed 1G
    Media Fiber
    Range Intermediate
    Type GBIC
    Mode Single Mode

    CWDM-GBIC-1530-RF

    AED

    AED 0

    0