DWDM-X2-59.79-RF

Double click on above image to view full picture

Zoom Out
Zoom In

DWDM-X2-59.79-RF

Description:

Cisco Refurbished
Original Part No : DWDM-X2-59.79=

DWDM X2 1559.79 nm X2 100 GHz ITU grid) REMANUFACTURED
AED 0

Availability: Out of stock


Not Available

  • Add to Compare
  • Details

    Product Overview

    The Cisco® Dense Wavelength-Division Multiplexing (DWDM) X2 pluggable module (Figure 1) allows enterprise companies and service providers to offer scalable and easy-to-deploy 10 Gigabit Ethernet services in their networks.

    Figure 1.      Cisco DWDM X2 Module

    Main features of the Cisco DWDM X2 include:

       The Cisco DWDM X2 supports 10GBASE Ethernet.

       The hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network.

       The Cisco DWDM X2 supports the Cisco Quality Identification (ID) feature, which enables a Cisco switch or router to identify whether or not the module is an X2 module certified and tested by Cisco.

    The module supports 32 nontunable ITU 100-GHz wavelengths compatible with the Cisco ONS DWDM channel plan.

       The Cisco DWDM X2 supports digital optical monitoring capability.

    Platform Support

    The Cisco DWDM X2 is supported across a variety of Cisco switches, routers, and optical transport devices. For more details, refer to the Cisco wavelength-division multiplexing transceivers compatibility matrix athttp://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL _6982.html.

    Connectors and Cabling

       Equipment: Standard X2 interface

       Network: Dual SC/PC connector

    Note:    Only connections with patch cords with PC or UPC connectors are supported; patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the “Standards” section.

    Dimensions

    Dimensions (D x W x H) are 91 x 36 x 13.46 mm. Cisco X2s typically weigh less than 300 grams.

    Environmental Conditions and Power Requirements

       Operating temperature range: 32 to 158°F (0 to 70°C)

       Storage temperature range: -40 to 185°F (-40 to 85°C)

    The maximum power consumption per Cisco X2 module is 4W.

    Optical Parameters

    Table 1 shows the main optical characteristics for the Cisco DWDM X2 Modules.

    Table 1.       Optical Parameters

    Parameter

    Symbol

    Minimum

    Typical

    Maximum

    Units

    Notes and Conditions

    Transmitter

    Spectral width

     

     

     

    0.2

    nm

    Full width,-20 dB from maximum, with resolution bandwidth (RBW) = 0.01 nm

    Transmitter center wavelength

     

    x – 100

    x

    x + 100

    pm

    Refer to Table 2 for center wavelengths

    Side-mode suppression ratio

    SMSR

    30

     

     

    dB

     

    Transmitter extinction ratio

    OMI

    9

     

     

    dB

     

    Transmitter optical output power

    Pout

    -1.0

     

    3.0

    dBm

    Average power coupled into single-mode fiber

    Receiver

    Receiver optical input wavelength

     

    1530

     

    1565

    nm

     

    Receiver damage threshold

     

     

     

    -1.0

    dBm

     

    Dispersion tolerance

     

    -500

     

    1600

    ps/nm

     

    Power-Limited Performance (measured at optical signal-to-noise ratio [OSNR] of 30 dB at 0.1-nm RBW)

     

     

     

     

     

     

    Optical input power

    Pin

    -23.0

     

    -7.0

    dBm

    *

    Dispersion power penalty

     

     

     

    3

    dB

    *

    Noise-Limited Performance (Measured at OSNR of 24 dB at 0.1-nm RBW)

    Optical input power

    Pin

    -17.0

     

    -7.0

    dB

    *

    Dispersion OSNR penalty

     

     

     

    3

    dB

    *

    * At Bit error rate (BER) = 1E-12 with IEEE802.3 test pattern.

    Notes:

    1.     Parameters are specified over temperature and at end of life unless otherwise noted.

    2.     When shorter distances of single-mode fiber are used, an inline optical attenuator (10-dB) must be used to avoid overloading and damaging the receiver.

    3.     To prevent burst errors, Cisco suggests the use of appropriate optical attenuation in front of the receiver when interoperating X2 DWDM and XENPAK DWDM specifically under the following conditions:

       When the input power on the receiver exceeds -14dBm

       When the optical signal to noise ratio is less than 30dB @ 0.1nm RBW

       When total chromatic dispersion is greater than 1500ps/nm

    The attenuation should be chosen to limit the input power into the receiver to be less than - 14dBm

    Warranty

    The standard warranty is 1 year.

    Ordering Information

    Table 2 gives details about ordering Cisco DWDM X2s.

    Table 2.       Cisco DWDM X2 Ordering Information

    Product Number

    Description

    ITU Channel

    DWDM-X2-60.61=

    10GBASE-DWDM 1560.61 nm X2 (100-GHz ITU grid)

    21

    DWDM-X2-59.79=

    10GBASE-DWDM 1559.79 nm X2 (100-GHz ITU grid)

    22

    DWDM-X2-58.98=

    10GBASE-DWDM 1558.98 nm X2 (100-GHz ITU grid)

    23

    DWDM-X2-58.17=

    10GBASE-DWDM 1558.17 nm X2 (100-GHz ITU grid)

    24

    DWDM-X2-56.55=

    10GBASE-DWDM 1556.55 nm X2 (100-GHz ITU grid)

    26

    DWDM-X2-55.75=

    10GBASE-DWDM 1555.75 nm X2 (100-GHz ITU grid)

    27

    DWDM-X2-54.94=

    10GBASE-DWDM 1554.94 nm X2 (100-GHz ITU grid)

    28

    DWDM-X2-54.13=

    10GBASE-DWDM 1554.13 nm X2 (100-GHz ITU grid)

    29

    DWDM-X2-52.52=

    10GBASE-DWDM 1552.52 nm X2 (100-GHz ITU grid)

    31

    DWDM-X2-51.72=

    10GBASE-DWDM 1551.72 nm X2 (100-GHz ITU grid)

    32

    DWDM-X2-50.92=

    10GBASE-DWDM 1550.92 nm X2 (100-GHz ITU grid)

    33

    DWDM-X2-50.12=

    10GBASE-DWDM 1550.12 nm X2 (100-GHz ITU grid)

    34

    DWDM-X2-48.51=

    10GBASE-DWDM 1548.51 nm X2 (100-GHz ITU grid)

    36

    DWDM-X2-47.72=

    10GBASE-DWDM 1547.72 nm X2 (100-GHz ITU grid)

    37

    DWDM-X2-46.92=

    10GBASE-DWDM 1546.92 nm X2 (100-GHz ITU grid)

    38

    DWDM-X2-46.12=

    10GBASE-DWDM 1546.12 nm X2 (100-GHz ITU grid)

    39

    DWDM-X2-44.53=

    10GBASE-DWDM 1544.53 nm X2 (100-GHz ITU grid)

    41

    DWDM-X2-43.73=

    10GBASE-DWDM 1543.73 nm X2 (100-GHz ITU grid)

    42

    DWDM-X2-42.94=

    10GBASE-DWDM 1542.94 nm X2 (100-GHz ITU grid)

    43

    DWDM-X2-42.14=

    10GBASE-DWDM 1542.14 nm X2 (100-GHz ITU grid)

    44

    DWDM-X2-40.56=

    10GBASE-DWDM 1540.56 nm X2 (100-GHz ITU grid)

    46

    DWDM-X2-39.77=

    10GBASE-DWDM 1539.77 nm X2 (100-GHz ITU grid)

    47

    DWDM-X2-38.98=

    10GBASE-DWDM 1538.98 nm X2 (100-GHz ITU grid)

    48

    DWDM-X2-38.19=

    10GBASE-DWDM 1538.19 nm X2 (100-GHz ITU grid)

    49

    DWDM-X2-36.61=

    10GBASE-DWDM 1536.61 nm X2 (100-GHz ITU grid)

    51

    DWDM-X2-35.82=

    10GBASE-DWDM 1535.82 nm X2 (100-GHz ITU grid)

    52

    DWDM-X2-35.04=

    10GBASE-DWDM 1535.04 nm X2 (100-GHz ITU grid)

    53

    DWDM-X2-34.25=

    10GBASE-DWDM 1534.25 nm X2 (100-GHz ITU grid)

    54

    DWDM-X2-32.68=

    10GBASE-DWDM 1532.68 nm X2 (100-GHz ITU grid)

    56

    DWDM-X2-31.90=

    10GBASE-DWDM 1531.90 nm X2 (100-GHz ITU grid)

    57

    DWDM-X2-31.12=

    10GBASE-DWDM 1531.12 nm X2 (100-GHz ITU grid)

    58

    DWDM-X2-30.33=

    10GBASE-DWDM 1530.33 nm X2 (100-GHz ITU grid)

    59

    Regulatory and Standards Compliance

    Standards

       GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable

       GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies

       GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors

    Safety

       Laser Class I 21CFR1040

       Network Equipment Building Standards (NEBS) Level 3

    For More Information

    For more information about 10GBASE Cisco DWDM X2 Modules, contact your local Cisco sales representative.

     

     

    Additional Information

    SKU DWDM-X2-59.79-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/dwdm-transceiver-modules/data_sheet_c78_489725.html
    Condition Refresh
    Speed 10G
    Media Fiber
    Range Long
    Type X2
    Mode Single Mode

    DWDM-X2-59.79-RF

    AED

    AED 0

    0