DWDMXENPAK40.56-RF

Double click on above image to view full picture

Zoom Out
Zoom In

DWDMXENPAK40.56-RF

Description:

Cisco Refurbished
Original Part No : DWDM-XENPAK-40.56=

10GBASE-DWDM 1540.56nmXENPAK(100GHz ITU grid) REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 20000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    OVERVIEW

    The Cisco ® Dense Wavelength-Division Multiplexing (DWDM) XENPAK pluggable allows enterprise companies and service providers to provide scalable and easy-to-deploy 10 Gigabit Ethernet services in their networks (Figure 1).
    Main features of the Cisco DWDM XENPAK include:

    • The Cisco DWDM XENPAK supports 10GBASE Ethernet.

    • The hot-swappable input/output device plugs into an Ethernet XENPAK port of a Cisco switch or router to link the port with the network.

    • The Cisco DWDM XENPAK supports the Cisco quality identification (ID) feature that enables a Cisco Systems® switch or router to identify whether or not the module is a Cisco certified and tested XENPAK module.

    • The Cisco DWDM XENPAK supports 32 non-tunable ITU 100 GHz wavelengths compatible with the Cisco ONS DWDM channel plan.

    • The Cisco DWDM XENPAK supports digital optical monitoring capability.

    Figure 1. Cisco DWDM XENPAKs

     

    PLATFORM SUPPORT

    The Cisco DWDM XENPAKs are supported across a variety of Cisco switches, routers, and optical transport devices. For more details, refer to the document Cisco DWDM XENPAK Compatibility Matrix.

    Connectors and Cabling

    • Equipment: Standard XENPAK interface

    Network: Dual SC/PC connector

    Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section.

    Dimension:

    Cisco DWDM Xenpak's typically weighs less than 300 grams

    Environmental Conditions and Power Requirements

    • Operating temperature range: 32 to 122°F (0 to 55°C)

    • Storage temperature range: -40 to 185°F (-40 to 85°C)

    The maximum power consumption per Cisco XENPAK is 8W.

    Optical Parameters

    Table 1 shows the main optical characteristics for the Cisco DWDM XENPAK modules.

    Table 1. Optical Parameters

     

     

    Parameter

    Symbol

    Minimum

    Typical

    Maximum

    Units

    Notes and Conditions

    Transmitter

    Spectral Width
         
    0.2
    nm
    Full width, -20dB from maximum, with Resolution bandwidth (RBW) = 0.01 nm
    Transmitter Center Wavelength
     
    x - 100
    x
    x + 100
    pm
    Refer to Table 2 for center wavelengths
    Side-Mode Suppression Ratio
    SMSR
    30
       
    dB
     
    Transmitter Extinction Ratio
    OMI
    9
       
    dB
     
    Transmitter Optical Output Power
    out
    -1.0
     
    3.0
    dBm
    Average power coupled into single-mode fiber

    Receiver

    Receiver Optical Input Wavelength
     
    1530
     
    1565
    nm
     
    Receiver Damage Threshold
         
    -1
    dBm
     
    Dispersion Tolerance
     
    -500
     
    1600
    ps/nm
     
    Power-Limited Performance (measured at optical signal-to-noise ratio [OSNR] of 30 dB at 0.1-nm RBW)
    Optical Input Power
    in
    -24.0
     
    -7.0
    dBm
    See footnote*
    Dispersion Power Penalty
         
    3
    dB
    See footnote*
    Noise-Limited Performance (measured at OSNR of 23 dB at 0.1-nm RBW)
    Optical Input Power
    in
    -17.0
     
    -7.0
    dB
    See footnote*
    Dispersion OSNR Penalty
         
    3
    dB
    See footnote*

     

    * At Bit error rate (BER) = 10e -12 with IEEE802.3 test pattern

    Note: 1. Parameters are specified over temperature and at end of life unless otherwise noted.
    2. When shorter distances of single-mode fiber are used, an inline optical attenuator (10-dB) must be used to avoid overloading and damaging the receiver.
    3. The receive-only WDM XENPAK has no transmitter. The receiver matches the receiver specifications given above. 
    4. To prevent burst errors, Cisco suggests the use of appropriate optical attenuation in front of the receiver when interoperating X2 DWDM and XENPAK DWDM specifically under the following conditions: 
    - When the input power on the receiver exceeds -14dBm, 
    - When the optical signal to noise ratio is less than 30dB @ 0.1nm RBW
    - When total chromatic dispersion is greater than 1500ps/nm
    The attenuation should be chosen to limit the input power into the receiver to be less than -14dBm.

    WARRANTY

    Standard warranty: 90 days

    ORDERING INFORMATION

    Table 2 gives details about ordering Cisco DWDM XENPAKs.

    Table 2. Cisco DWDM XENPAK Product Information

     

     

    Product Number

    Description

    ITU Channel

    DWDM-XENPAK-60.61=

    10GBASE-DWDM 1560.61 nm XENPAK (100-GHz ITU grid)
    21

    DWDM-XENPAK-59.79=

    10GBASE-DWDM 1559.79 nm XENPAK (100-GHz ITU grid)
    22

    DWDM-XENPAK-58.98=

    10GBASE-DWDM 1558.98 nm XENPAK (100-GHz ITU grid)
    23

    DWDM-XENPAK-58.17=

    10GBASE-DWDM 1558.17 nm XENPAK (100-GHz ITU grid)
    24

    DWDM-XENPAK-56.55=

    10GBASE-DWDM 1556.55 nm XENPAK (100-GHz ITU grid)
    26

    DWDM-XENPAK-55.75=

    10GBASE-DWDM 1555.75 nm XENPAK (100-GHz ITU grid)
    27

    DWDM-XENPAK-54.94=

    10GBASE-DWDM 1554.94 nm XENPAK (100-GHz ITU grid)
    28

    DWDM-XENPAK-54.13=

    10GBASE-DWDM 1554.13 nm XENPAK (100-GHz ITU grid)
    29

    DWDM-XENPAK-52.52=

    10GBASE-DWDM 1552.52 nm XENPAK (100-GHz ITU grid)
    31

    DWDM-XENPAK-51.72=

    10GBASE-DWDM 1551.72 nm XENPAK (100-GHz ITU grid)
    32

    DWDM-XENPAK-50.92=

    10GBASE-DWDM 1550.92 nm XENPAK (100-GHz ITU grid)
    33

    DWDM-XENPAK-50.12=

    10GBASE-DWDM 1550.12 nm XENPAK (100-GHz ITU grid)
    34

    DWDM-XENPAK-48.51=

    10GBASE-DWDM 1548.51 nm XENPAK (100-GHz ITU grid)
    36

    DWDM-XENPAK-47.72=

    10GBASE-DWDM 1547.72 nm XENPAK (100-GHz ITU grid)
    37

    DWDM-XENPAK-46.92=

    10GBASE-DWDM 1546.92 nm XENPAK (100-GHz ITU grid)
    38

    DWDM-XENPAK-46.12=

    10GBASE-DWDM 1546.12 nm XENPAK (100-GHz ITU grid)
    39

    DWDM-XENPAK-44.53=

    10GBASE-DWDM 1544.53 nm XENPAK (100-GHz ITU grid)
    41

    DWDM-XENPAK-43.73=

    10GBASE-DWDM 1543.73 nm XENPAK (100-GHz ITU grid)
    42

    DWDM-XENPAK-42.94=

    10GBASE-DWDM 1542.94 nm XENPAK (100-GHz ITU grid)
    43

    DWDM-XENPAK-42.14=

    10GBASE-DWDM 1542.14 nm XENPAK (100-GHz ITU grid)
    44

    DWDM-XENPAK-40.56=

    10GBASE-DWDM 1540.56 nm XENPAK (100-GHz ITU grid)
    46

    DWDM-XENPAK-39.77=

    10GBASE-DWDM 1539.77 nm XENPAK (100-GHz ITU grid)
    47

    DWDM-XENPAK-38.98=

    10GBASE-DWDM 1538.98 nm XENPAK (100-GHz ITU grid)
    48

    DWDM-XENPAK-38.19=

    10GBASE-DWDM 1538.19 nm XENPAK (100-GHz ITU grid)
    49

    DWDM-XENPAK-36.61=

    10GBASE-DWDM 1536.61 nm XENPAK (100-GHz ITU grid)
    51

    DWDM-XENPAK-35.82=

    10GBASE-DWDM 1535.82 nm XENPAK (100-GHz ITU grid)
    52

    DWDM-XENPAK-35.04=

    10GBASE-DWDM 1535.04 nm XENPAK (100-GHz ITU grid)
    53

    DWDM-XENPAK-34.25=

    10GBASE-DWDM 1534.25 nm XENPAK (100-GHz ITU grid)
    54

    DWDM-XENPAK-32.68=

    10GBASE-DWDM 1532.68 nm XENPAK (100-GHz ITU grid)
    56

    DWDM-XENPAK-31.90=

    10GBASE-DWDM 1531.90 nm XENPAK (100-GHz ITU grid)
    57

    DWDM-XENPAK-31.12=

    10GBASE-DWDM 1531.12 nm XENPAK (100-GHz ITU grid)
    58

    DWDM-XENPAK-30.33=

    10GBASE-DWDM 1530.33 nm XENPAK (100-GHz ITU grid)
    59

    WDM-XENPAK-REC=

    10GBASE-WDM receive-only XENPAK
     

     

    REGULATORY AND STANDARDS COMPLIANCE

    Safety

    • Laser Class I 21CFR1040

    • Network Equipment Building Standards (NEBS) Level 3

    GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
    GR-326-CORE: Generic Requirements for Singlemode Optical Connectors and Jumper Assemblies
    GR-1435-CORE: Generic Requirements for Multi-Fiber Optical Connectors

    Additional Information

    SKU DWDMXENPAK40.56-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/dwdm-transceiver-modules/product_data_sheet0900aecd801f9333.html
    Condition Refresh
    Speed 10G
    Media Fiber
    Range Long
    Type XENPAK
    Mode Single Mode

    DWDMXENPAK40.56-RF

    AED

    AED 0

    0