Details
The Cisco® IAD2430 is the next-generation integrated voice and data services platform for service providers, building on the industry-leading IAD2420. The Cisco IAD2430 offers a major leap forward in price performance and enhanced software functions, such as Cisco CallManager Express) and rich Media Gateway Control Protocol (MGCP) gateway services, to cost-effectively accelerate the migration from time-division multiplexing (TDM) to voice over IP (VoIP). The Cisco IAD2430 builds on the maturity of the Cisco IAD2420 software by providing denser interfaces (up to 24FXS and up to 2 data T1s), an encryption co-processor, and DC battery backup input while maintaining a 1-rack-unit (RU) form factor for space-saving service provider managed services deployments.
Figure 1. The Cisco IAD2430 Series Devices
Primary Applications
Figure 2. Cisco IAD2430 in a Data and GR.303-Based Voice (TDM) Architecture
Figure 3. Cisco IAD2430 in Data and Call Agent-Based Voice (VoIP) Architecture
Primary Features and Benefits to Service Providers
Transparent Service Migration
Flexibility
Functional Intelligence
Operational Efficiencies
End-to-End Solution
Primary Benefits to End Users
Robust Voice Quality
Reliability
Service Flexibility
Table 1. Feature and Benefit Summary
Feature | Benefit |
Works with Both Class 5 Switch-Access and Class 5 Switch-Alternative Architectures | • Provides compatibility with current and emerging voice architectures • Allows transparent service migration • Works throughout the service provider network |
Enables TDM Voice, VoIP, and VoIP over ATM | • Gives freedom of choice to service providers and end users • Allows service providers to meet the needs of a diverse customer base |
Delivers SNAP Technology and Cisco Configuration Express Tools | • Allows remote installation and configuration with minimal technician involvement • Reduces or eliminates truck rolls and associated costs • Requires technicians with less training • Allows immediate service additions and deletions to be performed remotely • Speeds customer service and support • Allows direct shipment to end-user site, thereby eliminating warehousing of inventory and manual handling |
Provides 3DES Co-Processor Encryption Engine | • Enables fast and strong encryption for security • Provides peace of mind for SMB customers |
Provides Interoperability with a Wide Variety of Vendors | • Allows service providers to design and configure networks that fit specific needs • Eliminates compatibility concerns with major vendors |
Integrates with the End-to-End Cisco Solution | • Reduces training and maintenance costs • Works with the other components of Cisco packet voice solutions |
Delivers Toll-Quality Voice Service | • Provides the level of voice quality end users have come to expect |
Offers Proven Reliability | • Provides trouble-free operation to end users • Reflects favorably on the service provider offering quality |
Enables Service Flexibility | • Allows service changes to be performed instantly and remotely |
Technical Specifications
WAN Options
• One or two T1/E1 (Point-to-Point Protocol [PPP], High-Level Data Link Control [HDLC], or Frame Relay) with integrated channel service unit/digital service unit (CSU/DSU) (RJ-48 connector)
• One or two Fast Ethernet (10/100BASE-T) ports for Ethernet access
• One voice WAN interface card (VWIC) slot for:
– Broadband interfaces
– ADSL (WIC1-ADSL) or G.SHDSL (WIC1-SHDSL) for DSL uplink
– WAN: WIC-1DSU-T1, VWIC-2MFT-T1, VWIC-2MFT-E1
– Voice interfaces: VIC2-4FXO, VIC2-2FXO, VIC2-2FXS, VIC-4FXS/DID, VIC2-2BRI-NT/TE
– Serial interfaces: WIC-2T, WIC-1T
Voice
• Analog: 8 FXS/16 FXS/24 FXS ports (RJ-21 connector)
• Digital: One T1-PBX (channel associated signaling [CAS], Primary Rate Interface [PRI]) port
• Bearer: TDM voice, VoIP (Real-Time Transport Protocol [RFC1889] [RTP], cRTP)
• VoIP properties: RTP, cRTP, echo cancellation, silence suppression/comfort noise, modem passthrough, Cisco fax relay, T.38 fax relay
• Call control: MGCP 0.1, MGCP 1.0, H.323, SIP
• DSPs: CELP (G.729a), ADPCM (G.726 (32), G.726(16)), PCM (G.711uLaw, G.711aLaw)
• Interface type: Loop start, ground start
• RENs: 5 REN per port, 12 REN per system
• Simultaneous voice calls (digital/analog): 24/24
CLASS Features for xGCP
• Call waiting, cancel call waiting
• Caller ID with name and number
• Caller ID blocking
• Caller ID with name/number and call waiting
• Call forwarding: no answer/busy/variable
• Call forwarding: remote access
• Call transfer
• Three-way calling
• Message waiting indicator/tone (stutter)
• Call return (*69)
• Repeat dialing, busy call return (*66)
• Call blocking with toll restriction
• Call trace
• Call screening (*60)
• Distinctive-ring service
• Off-hook warning tone
• Selective/anonymous call rejection
Data
• Up to two 10/100BaseTX port (RJ-45 connector)
• WAN: PPP, HDLC, MLPPP, Frame Relay
• Frame relay: FRF.5/FRF.8, FRF.12
• QoS (IP): LLQ, Differentiated Service Code Points (DSCP), IP precedence, CAR
• Routing: RIP v1/v2, OSPF, static
• Security: ACLs, multiple levels of passwords
• Encryption: 3DES co-processor
• Data services: VPN/firewall (feature license)
• Other: NAT/PAT, DHCP server/client/relay, IEEE 802.1d
System
• Processor: RISC processor
• Memory (default): 128/64MB SDRAM
• Internal flash (default): 32/64 MB
• Compact flash: One slot Type II
• Modularity: One VWIC slot
• Encryption: On-board 3DES co-processor
• Console/auxiliary (max): Up to 119.2kbps per port
Interoperability
• Trunking gateway: Cisco 3660, Cisco AS5000 Series, MGX 8800 Series
• Call agents: Cisco BTS 10200, Broadsoft, Vocaldata, Nuera, General Bandwidth
Management
• SNAP auto-installation technology
• Cisco CNS 1.5
• CiscoView 2000
• IE2100
Power
• AC input voltage: 100 to 240 VAC
• AC input current (max): 1 Amp
• DC input voltage: 12 V
• Frequency: 50 to 60 Hz
• Power dissipation (max): 70W
– Cisco IAD2430-24FXS - 60W
– Cisco IAD2431-8FXS - 50W
– Cisco IAD2431-16FXS - 60W
– Cisco IAD2431-1T1E1 - 35W
– Cisco IAD2432-24FXS - 70W
Physical
• Width: 17.50 inches (444.5 mm)
• Height: 1.75 inches (44.4 mm) (add 0.17 inch for optional rubber feet)
• Depth: 13.5 inches (342.9 mm)
• Weight (max): 11 lb (4.106 kg)
• Rack or wall mountable
Table 2. Voice Port
Category | Specification |
Tip/Ring Interfaces for each FXS Port (SLIC) | |
Ring Voltage | 50V if no DC offset |
Ring Frequency | 20, 25, 30, 50 Hz |
Ring Waveform | Sine wave if no DC offset 20 and 24 V dc offset will be trapezoidal |
Ring Load | 1400 ohm + 40µF (Up to three ports at once) |
Ringer Equivalence Number (REN) | Up to 5 REN per FXS port, 12 REN per system |
Loop Resistance | Up to 600 ohm (including the phone or terminal equipment) |
On-Hook/Off-Hook Characteristics | |
On-Hook Voltage (Tip/Ring) | -50 V (idle voltage high is set) 20 V (idle voltage low is set) |
Off-Hook Current | 25 mAmp (nominal) |
RJ-11 FXS Port Terminating Impedance Option | 600 ohm complex, 600 ohm real, 900 ohm complex, 900 ohm real, complex1 and complex2 |
Environment
• Operating temperature: 32 to 104°F (0 to 40°C)
• Non-operating temperature: -40 to 158ºF (-40 to 70ºC)
• Operating humidity: 5 to 95% non-condensing
• Noise level (max): 55 dB @ 3 ft (0.914 meters)
• On premise only, restricted access area, permanent ground required, only to be serviced/installed by trained professionals. Table 3 shows NEBS type tests performed with the IAD2430 series.
Table 3. FXS Ports Power Cross Test Results
NEBS Tests - Type 1/3 - Power Cross - (Tip/Ring to Ground) | Result |
50 V/0.33 A; 15 Min | Pass |
100 V/0.17 A; 15 Min | Pass |
200 V/1 A; 1 s Pulses, 60 Reps | Pass |
Certifications
• Safety: UL 60950 3rd Edition; IEC 60950 3rd Edition, AS/NZS 3260: 1993 with Amendments 1, 2, 3, and 4; TS001:1996 with Amendment 1
• Emissions: 47CFR15 Class A (FCC); CISPR22 Class A; EN55022 Class A; AS/NZS 3548 Class A (ACA); ICES003 Class A (Industry Canada); V-3 Class A (VCCI); CNS13438 Class A (BSMI); EN300386:2001 Class A
• Immunity: EN55024 and EN50082-1 (including EN 61000 4-2 Electrostatic Discharge; EN 61000 4-3 Radiated Susceptibility; EN 61000 4-4 Electrical Fast Transients; EN 61000 4-5 Power and Signal Line Surges); EN300386:2001
• Meets requirements of GR1089 - Level 3 type 2/4; GR63
• This equipment complies with all the regulatory requirements for connection to the communications networks of each country in which it is sold. ../../../../../home/search.htm
Table 4. Cisco IAD2430 Series Model Numbers
Part Number | Description |
IAD2430-24FXS | Two 10/100BaseT ports with 24 FXS analog voice ports (no VWICs) |
IAD2431-8FXS | One T1 WAN port, One 10/100BaseT port, One VWIC slot, with 8 FXS analog voice ports |
IAD2431-16FXS | One T1 WAN port, Two 10/100BaseT ports, One VWIC slot, with 16 FXS analog voice ports |
IAD2431-1T1E1 | One T1 WAN port, Two 10/100BaseT ports, One VWIC slot, with one T1/E1 digital voice port |
IAD2432-24FXS | Two T1 WAN ports, Two 10/100BaseT ports, One VWIC slot, with 24 FXS analog voice ports |
Feature Licenses | |
FL-IAD2400-INT | Firewall features for enhanced Internet access |
FL-CCME-SMALL | Cisco CallManager Express for up to 24 phones |
Additional Information
SKU | IAD2431-8FXS-RF |
---|---|
Weight (Kg) | 4 |
Datasheet URL | http://www.cisco.com/c/en/us/products/collateral/unified-communications/iad2430-integrated-access-device/product_data_sheet09186a008019aded.html |
Condition | Refresh |
Router Series | 2400 Series |
Chassis Type | Fixed |
Rack Mountable | Yes |
Built In Ports | 2 |
Port Speed | 1 Gbps |
Port Type | RJ45 |