N7K-F132XP-15-RF

Double click on above image to view full picture

Zoom Out
Zoom In

N7K-F132XP-15-RF

Description:

Cisco Refurbished
Original Part No : N7K-F132XP-15=

N7K - 32 Port 1G/10G Ethernet Module,SFP/SFP+ REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 35000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Product Overview

    The Cisco Nexus® 7000 F-Series 32-Port 1 and 10 Gigabit Ethernet Module offers outstanding flexibility and performance, with extensive virtualization and multipath capabilities. The module enables the deployment of high-density, low-latency, scalable data center architecture.

    The Cisco Nexus 7000 F-Series 32-Port 1 and 10 Gigabit Ethernet Module (Figure 1) is the first of the Cisco Nexus 7000 F-Series Ethernet modules, extending the capabilities of the Cisco Nexus 7000 Series in the data center. Powered by the F1 forwarding engine, the module delivers 480 million packets per second (Mpps) of distributed Layer 2 forwarding and up to 320 Gbps of data throughput through a custom dedicated forwarding application- specific integrated circuit (ASIC), enabling the creation of extensible data centers. A Cisco Nexus 7000 18-Slot Switch fully populated with Cisco Nexus F-Series 32-Port 1 and 10 Gigabit Ethernet Modules has the capability to deliver up to 10.2 terabits per second (Tbps) of switching performance, with a typical power consumption of less than 10 watts (W) per port.

    Figure 1. Cisco Nexus 7000 F-Series 32-Port 1 and 10 Gigabit Ethernet Fabric Module

    Powerful access control list (ACL) processing supports 32,000 per module, ingress and egress, with the ACL entries addressing Layer 2, 3, and 4 fields. The F1 forwarding engine also supports applications requiring port mirroring, with integrated hardware support for 16 simultaneous unidirectional Cisco Switched Port Analyzer (SPAN) sessions per module. Additionally, the F-Series module delivers integrated Fibre Channel over Ethernet (FCoE), greatly simplifying the network infrastructure and reducing costs by enabling the deployment of unified data center fabrics to consolidate data center traffic onto a single, general-purpose, high-performance, highly available network.

    With the Cisco Nexus 7000 F-Series module, FCoE can be deployed in director-class modular platforms for the access and core of converged networks. In addition to FCoE host and target support, the module provides VE-port support, allowing creation of FCoE Inter-Switch Links (ISLs) and enabling scalable, multihop FCoE topologies. The FCoE traffic in a Cisco Nexus 7000 Series Switch can be segmented using a dedicated storage virtual device context (VDC), providing isolation within the shared physical infrastructure. Cisco Nexus 7000 Series FCoE converged networks can be transparently bridged to Cisco® MDS 9500 Series Fibre Channel SANs with the Cisco MDS 10-Gbps 8-Port FCoE Module. This capability preserves existing and continued investments in Fibre Channel SANs and offers a single unified OS (Cisco NX-OS Software) and management platform (Cisco Data Center Network Manager [DCNM]) for both the LAN and SAN.

    The Cisco Nexus 7000 F-Series modules, when combined with the powerful Cisco NX-OS Software, deliver Cisco FabricPath multipath Ethernet technologies based on IETF Transparent Interconnection of Lots of Links (TRILL). Cisco FabricPath comprises a set of multipath Ethernet technologies and combines the reliability and scalability benefits of Layer 3 routing with the flexibility of Layer 2 Ethernet networks. With Cisco FabricPath, organizations can now build massively scalable, flexible networks that efficiently use available bandwidth between nodes, offering improved network resiliency.

    Cisco FabricPath offers a topology-based Layer 2 routing mechanism that provides an equal-cost multipath (ECMP) forwarding model. Cisco FabricPath implements an enhancement that resolves the MAC address table scalability challenge characteristic of switched Layer 2 networks. Enhanced virtual PortChannel (vPC+) is another technology offered by Cisco FabricPath. Similar to vPC, vPC+ allows the redundant interconnection of the existing Ethernet infrastructure to a Cisco FabricPath fabric without relying on Spanning Tree Protocol.

    The benefits of Cisco FabricPath include:

    Operational simplicity: Cisco FabricPath embeds an autodiscovery mechanism that does not require any additional platform configuration. By offering Layer 2 connectivity, this “VLAN anywhere” characteristic simplifies provisioning and offers workload flexibility across the network.

    High resiliency and performance: Because Cisco FabricPath is a Layer 2 routed protocol, it offers stability, scalability, and optimized resiliency along with network failure containment.

    Massively scalable fabric: By building a forwarding model on 16-way ECMP, Cisco FabricPath helps prevent bandwidth bottlenecks and allows capacity to be added dynamically, without network disruption.

    The Cisco Nexus 7000 F-1 Series 32-Port 1 and 10 Gigabit Ethernet Module delivers up to 512 ports per chassis capable of flexibly supporting both Gigabit and 10 Gigabit Ethernet on a per-port basis. Both Small Form-Factor Pluggable (SFP) and Enhanced SFP (SFP+) optics are available for long- and short-haul applications, including Twinax support, for rack-to-rack data center applications, enabling migration and support for numerous deployment scenarios requiring different media types. Table 1 summarizes the features and benefits of the Cisco Nexus 7000 F1-Series 32-Port 1 and 10 Gigabit Ethernet Module.

    Table 1. Features and Benefits

    Feature

    Benefit

    High-density 10 Gigabit Ethernet module

    Offers up to 256 10 Gigabit Ethernet ports in the Cisco Nexus 7000 10-Slot Switch and 512 ports in the

    Cisco Nexus 7000 18-Slot Switch for efficient and scalable network designs

    Cisco FabricPath technologies based on IETF TRILL

    With Cisco FabricPath, uses routing principles in the data plane and control plane to bring reliability and scalability to transparent bridging while maintaining flexibility and ease of use

    FCoE support

    Provides I/O consolidation at the access layer and core of the network, reducing the physical infrastructure that needs to be acquired, managed, and maintained

    Ideally suited for deployment in latency-sensitive applications

    Provides port-to-port latency as low as 5 microseconds, enabling support for critical applications

    Interface flexibility with SFP and

    SFP+ support

    Provides interface flexibility to fulfill any Gigabit Ethernet and 10 Gigabit Ethernet deployment needs, per port, with a variety of media types

    Efficient power use combined with high performance

    Has exceptionally low power consumption: typically 10W per port

    Virtual output queuing (VOQ) with centralized arbitration

    Enables fairness when one or more destinations is congested and support for lossless unified fabric

    Load sharing across all fabric modules

    Through its high-availability design, shares bandwidth across all fabric modules simultaneously for optimal performance

    Distributed forwarding

    Through its fully distributed data plane, offers high-performance parallel forwarding at 480 Mpps per module

    Online insertion and removal (OIR)

    Supports hot insertion and removal for continuous system operation

    Identification (ID) LED

    Through the beacon feature, allows administrators to clearly identify the module for a service condition;

    ports on the I/O module can send beacons as well

    Product Specifications

    Table 2 lists the product specifications for the Cisco Nexus 7000 F1-Series 32-Port 1 and 10 Gigabit Ethernet Module, and Tables 3 and 4 list specifications for pluggable optics.

    Table 2. Product Specifications

    Item

    Specifications

    System

    Product compatibility

    Supported in Cisco Nexus 7000 Series 9-, 10-. and 18-slot chassis
    Supported Fabric-1 or Fabric-2 fabric modules
    Supported SUP1, SUP2 or SUP2E Supervisor modules

    Software compatibility

    Cisco NX-OS Software Release 5.1.(1) or later (minimum requirement)

    Memory

    1 GB DRAM

    Front-panel LEDs

    Status: Green (operational), red (faulty), or orange (module booting)
    Link: Green (port enabled and connected), orange (port disabled), off (port enabled and not connected), or blinking green and orange in conjunction with ID LED blue (port flagged for identification; beacon)
    ID: Blue (operator has flagged this card for identification; beacon) or off (module not flagged)

    Programming interfaces

    XML
    Scriptable command-line interface (CLI)
    Cisco Data Center Network Manager (DCNM) GUI

    Network management

    Cisco DCNM 5.1

    Physical Interfaces

    Connectivity

    32 ports of Gigabit Ethernet and 10 Gigabit Ethernet (SFP or SFP+ pluggable optics modules)

    Maximum port density

    256 ports of Gigabit Ethernet and 10 Gigabit Ethernet for 10-slot chassis

    512 ports of Gigabit Ethernet and 10 Gigabit Ethernet for 18-slot chassis

    Queues per port

    Configurable template-based queuing modes:

    Ingress (4q1t and 2q1t)
    Egress (1p3q1t, 2p2q1t, 3p1q1t, 2p6q1t, 3p5q1t, and 1p7q1t)

    Scheduler

    Deficit-Weighted Round-Robin (DWRR)

    Jumbo frame support for bridged and routed packets

    Up to 9216 bytes

    Forwarding Engine: F1

    Performance

    480-Mpps Layer 2 forwarding capacity

    MAC entries

    16,000 per forwarding engine, and up to 256,000 per module

    VLANs

    4000 per forwarding engine, and up to 16,000 per module

    ACLs

    32,000 per module: 1000 ingress and 1000 egress per sequential port group pair

    FCoE features

    T11 VF-, VN-, and VE-port for multihop FCoE
    T11 FCoE Initialization Protocol (FIP)
    Fibre Channel Forwarder (FCF)

    Advanced FCoE features

    Virtual SANs (VSANs)
    Inter-VSAN Routing (IVR)
    PortChannels (up to 16 links)
    SAN trunking
    Storage VDC

    IEEE Data Center Bridging (DCB) features

    Priority-based flow control (PFC): IEEE P802.1Qbb
    Enhanced transmission selection (ETS): IEEE P802.1Qaz
    Data Center Bridging Exchange (DCBX)

    Fabric Interface

    Switch fabric interface

    230 Gbps in each direction (460 Gbps full duplex) distributed across five Cisco Nexus 7000 Series fabric modules with 46 Gbps per slot
    320-Gbps switching capacity, per module, in meshed architecture

    OIR

    Online insertion and removal

    Environmental

    Physical dimensions

    Occupies one I/O module slot in a Cisco Nexus 7000 Series chassis
    Dimensions (H x W x D): 1.733 x 15.3 x 22.68 in. (4.4 x 38.9 x 57.6 cm)
    Weight: 15.5 lb with SFP+ and 14 lb (6.4 kg) without SFP+ module

    Maximum power consumption

    385W per module

    Environmental conditions

    Operating temperature: 32 to 104°F (0 to 40°C)
    Operational relative humidity: 5 to 90%, noncondensing
    Storage temperature: -40F to 158°F (-40 to 70°C)
    Storage relative humidity: 5 to 95%, noncondensing

    Regulatory compliance

    EMC compliance
    FCC Part 15 (CFR 47) (USA) Class A
    ICES-003 (Canada) Class A
    EN55022 (Europe) Class A
    CISPR22 (International) Class A
    AS/NZS CISPR22 (Australia and New Zealand) Class A
    VCCI (Japan) Class A
    KN22 (Korea) Class A
    CNS13438 (Taiwan) Class A
    CISPR24
    EN55024
    EN50082-1
    EN61000-3-2
    EN61000-3-3
    EN61000-6-1
    EN300 386

    Environmental standards

    NEBS criteria levels
    SR-3580 NEBS Level 3 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4)
    Verizon NEBS compliance
    Telecommunications Carrier Group (TCG) Checklist
    Qwest NEBS requirements
    Telecommunications Carrier Group (TCG) Checklist
    ATT NEBS requirements
    ATT TP76200 level 3 and TCG Checklist
    ETSI
    ETSI 300 019-1-1, Class 1.2 Storage
    ETSI 300 019-1-2, Class 2.3 Transportation
    ETSI 300 019-1-3, Class 3.2 Stationary Use

    Safety

    UL/CSA/IEC/EN 60950-1
    AS/NZS 60950

    Warranty

    Cisco Nexus 7000 Series Switches come with the standard Cisco 1-year limited hardware warranty

    Table 3. 10 Gigabit Ethernet Interface Distances and Options

    10 Gigabit Ethernet SFP+ Part Number

    Wavelength (nanometers [nm])

    Fiber and Cable Type

    Core Size (microns)

    Model Bandwidth

    (MHz per km)1

    Cable Distance2

    SFP-10G-SR

    850

    Multimode fiber

    (MMF) (400/400)

    MMF (OM2)

    MMF (OM3)

    MMF (OM4)

    MMF (FDDI-grade)

    MMF (OM1)

    50.0
    50.0
    50.0
    50.0
    62.5
    62.5
    400
    500
    2000
    4700
    160
    200
    66m
    82m
    300m
    400m
    26m
    33m

    SFP-10G-LRM

    1310

    MMF4

    50
    50
    62.5
    400
    500
    500
    100m
    220m
    220m

    Single-mode fiber (SMF)

    G.652

    -

    300m

    SFP-10G-LR

    1310

    SMF

    G.652

    -

    10 km

    SFP-10G-ER

    1550

    SMF

    -

    -

    40 km 3

    SFP-10G-ZR

    1550

    SMF

    -

    -

    80 km

    DWDM-SFP10G-xx.xx=

    5

    SMF

    -

    -

    -

    SFP-H10GB-CU1M

    -

    Twinax cable, 30AWG cable assembly

    -

    -

    1m

    SFP-H10GB-CU1-5M

    -

    Twinax cable, passive, 30AWG cable assembly

    -

    -

    1.5m

    SFP-H10GB-CU2M

    -

    Twinax cable, passive, 30AWG cable assembly

    -

    -

    2m

    SFP-H10GB-CU2-5M

    -

    Twinax cable, passive, 30AWG cable assembly

    -

    -

    2.5m

    SFP-H10GB-CU3M

    -

    Twinax cable, 30AWG cable assembly

    -

    -

    3m

    SFP-H10GB-CU5M

    -

    Twinax cable, 24AWG cable assembly

    -

    -

    5m

    SFP-H10GB-ACU7M

    -

    Twinax cable, 24AWG cable assembly

    -

    -

    7m

    SFP-H10GB-ACU10M

    -

    Twinax cable, 24AWG cable assembly

    -

    -

    10m

    SFP-10G-AOC1M

    -

    Active Optical Cable assembly

    -

    -

    1m

    SFP-10G-AOC2M

    -

    Active Optical Cable assembly

    -

    -

    2m

    SFP-10G-AOC3M

    -

    Active Optical Cable assembly

    -

    -

    3m

    SFP-10G-AOC5M

    -

    Active Optical Cable assembly

    -

    -

    5m

    SFP-10G-AOC7M

    -

    Active Optical Cable assembly

    -

    -

    7m

    SFP-10G-AOC10M

    -

    Active Optical Cable assembly

    -

    -

    10m

    Note: See the SFP+ optics data sheet for additional information: http://cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html. Please refer to the release notes for software version requirement information.

    1 Specified at transmission wavelength.
    2 The minimum cabling distance for -SR, -LRM, -LR, and -ER modules is 2m, according to IEEE 802.3ae.
    3 Links longer than 30 km are considered engineered links according to IEEE 802.3ae.
    4 A mode-conditioning patch is required for use over legacy MMF types such as FDDI-grade, OM1, and OM2. Please refer to the product bulletin at http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.
    5 Forty different wavelengths are offered. See the dense wavelength-division multiplexing (DWDM) SFP+ optics data sheet for additional product numbers and information: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/data_sheet_c78-711186.html.

    Table 4. Gigabit Ethernet Interface Distances and Options

    Gigabit Ethernet SFP Part Number

    Wavelength (nm)

    Fiber and Cable Type

    Core Size (microns)

    Model Bandwidth (MHz per km)

    Cable Distance

    GLC-SX-MM SFP-GE-S GLC-SX-MMD

    850

    MMF (400/400)

    MMF (OM2)

    MMF (OM3 and OM4)

    MMF (FDDI-grade)

    MMF (OM1)

    50
    50
    50
    62.5
    62.5
    400
    500
    2000
    160
    200
    500m
    550m
    1000m
    220m
    275m

    GLC-LH-SM SFP-GE-L GLC-LH-SMD

    1310

    MMF2

    50
    50
    62.5
    400
    500
    500
    550m
    550m
    550m

    SMF

    G.652

    10 km

    GLC-ZX-SM SFP-GE-Z GLC-ZX-SMD

    1550

    SMF

    -

    -

    70 to 100 km1

    GLC-T SFP-GE-T

    -

    Category 5

    -

    -

    100m

    CWDM-SFP-1xxx=

    3

    SMF

    -

    -

    -

    DWDM-SFP-xxxx=

    4

    SMF

    -

    -

    -

    Note: See the SFP optics data sheet for additional information: http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.html. Please refer to the release notes for software version requirement information.

    1 1000BASE-ZX SFP can reach up to 100 km by using dispersion-shifted SMF or low attenuation SMF; the distance depends on fiber quality, number of splices, and connectors.
    2 A mode-conditioning patch is required for use over legacy MMF types such as FDDI-grade, OM1, and OM2. Please refer to the product bulletin at http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.
    3 Eight different wavelengths are offered. See the coarse wavelength-division mulitplexing (CWDM) SFP optics data sheet for additional product numbers and information: http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6575/product_data_sheet09186a00801a557c.html.
    4 Forty different wavelengths are offered. See the dense wavelength-division mulitplexing (DWDM) SFP optics data sheet for additional product numbers and information: http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/product_data_sheet0900aecd80582763.html.

    Ordering Information

    To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center. Table 5 provides ordering information.

    Table 5. Ordering Information

    Product Name

    Part Number

    Nexus 7000 - 32 Port 1G/10G Ethernet Module, SFP/SFP+ (and spare)

    N7K-F132XP-15

    N7K-F132XP-15=

    FCoE License for Nexus 7000 32-port 10G SFP+ (F1) (and spare)

    N7K-FCOEF132XP

    N7K-FCOEF132XP=

    Service and Support

    Cisco offers a wide range of services to help accelerate your success in deploying and optimizing Cisco Nexus 7000 Series Switches in your data center. Our innovative services are delivered through a unique combination of people, processes, tools, and partners and are focused on helping you increase operating efficiency and improve your data center network. Cisco Advanced Services uses an architecture-led approach to help you align your data center infrastructure with your business goals and provide long-term value.

    Cisco SMARTnet® Service helps you resolve mission-critical problems with direct access at any time to Cisco network experts and award-winning resources. With this service, you can take advantage of the Cisco Smart Call Home service capability, which offers proactive diagnostics and real-time alerts on your Cisco Nexus 7000 Series Switches. Spanning the entire network lifecycle, Cisco Services helps increase investment protection, optimize network operations, support migration, and strengthen your IT expertise. For more information about Cisco Data Center Services, visit http://www.cisco.com/go/dcservices.

    For More Information

    For more information about the Cisco Nexus 7000 Series, visit the product homepage at http://www.cisco.com/go/nexus7000 or contact your local account representative.

    Additional Information

    SKU N7K-F132XP-15-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/data_sheet_c78-605622.html
    Condition Refresh
    Module Type Fiber Module Card

    N7K-F132XP-15-RF

    AED

    AED 0

    0