N7K-F248XP-25-RF

Double click on above image to view full picture

Zoom Out
Zoom In

N7K-F248XP-25-RF

Description:

Cisco Refurbished
Original Part No : N7K-F248XP-25=

Nexus 7000 F2-Series 48Port 10GbE (req. SFP+) REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 44000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Product Overview

    The Cisco Nexus® 7000 48-Port 1 and 10 Gigabit Ethernet F2-Series Module (referred to as the Cisco Nexus 7000 F2-Series Module in this document) offers outstanding flexibility and wire-rate performance on each port. The module enables the deployment of high-density, low-latency, scalable data center architectures.

    The Cisco Nexus 7000 Series Switches provide the foundation of the Cisco® Unified Fabric. They are a modular data center-class product line designed for highly scalable 10 Gigabit Ethernet networks. The fabric architecture scales beyond 15 terabits per second (Tbps), designed to support future 40 and 100 Gigabit Ethernet interfaces. To meet the requirements of the most mission-critical network environments, the switches deliver continuous system operations and virtualized services. The Cisco Nexus 7000 Series is powered by the proven Cisco NX-OS Software operating system, with enhanced features to deliver real-time system upgrades with exceptional manageability and serviceability. Its innovative unified fabric design is purpose built to support consolidation of IP and storage networks on a single lossless Ethernet fabric.

    Features and Benefits

    The Cisco Nexus 7000 F2-Series Module (Figure 1) is a low-latency, high-performance, high-density 10 Gigabit Ethernet module designed for mission-critical data center networks. Up to 768 wire-rate 10 Gigabit Ethernet ports are supported in a single system through the use of the Cisco Nexus 7000 18-Slot Switch chassis, providing the highest-density of wire-rate 10 Gigabit Ethernet ports on the market (Table 1).

    Figure 1.      Cisco Nexus 7000 F2-Series Module

    Table 1.       Wire-Rate Port Density

    Cisco Nexus 7000 Series Chassis

    Maximum 10G port density

    Cisco Nexus 7000 18-Slot Switch

    768

    Cisco Nexus 7000 10-Slot Switch

    384

    Cisco Nexus 7000 9-Slot Switch

    336

    Cisco Nexus 7000 4-Slot Switch

    96

    The Cisco Nexus 7000 F2-Series Module is built with switch-on-chip (SoC) architecture, in which a single ASIC implements all the module functions: from ingress buffering, to forwarding lookups and access control lists (ACLs) and quality-of-service (QoS) tables, to fabric interfaces and virtual output queuing (VOQ). Each SoC manages four front-panel interfaces. This type of design increases performance while lowering the power and cooling requirements of the module.

    Powered by the Cisco Nexus 7000 F2-Series SoC architecture, the module delivers 720 million packets per second (mpps) of distributed Layer 2 and Layer 3 forwarding and up to 480 Gbps of data throughput. A Cisco Nexus 7000 18-Slot Switch fully populated with the Cisco Nexus 7000 F2-Series Module has the capability to deliver up to 11.5 billion packets per second and 15.4 terabits per second (Tbps) of switching performance, with a typical power consumption of around 7.5 watts (W) per port.

    The module protects investments with standards-based 10 Gigabit Ethernet, Fibre Channel over Ethernet (FCoE) features, and virtual machine-awareness features that allow IT departments to consolidate networks based on their own unique requirements and timing. Each port can also be used at 1 Gigabit Ethernet speed, allowing IT departments to migrate to 10 Gigabit Ethernet based on the specific needs of their networks.

    With the Cisco Nexus 7000 F-Series module, FCoE can be deployed in director-class modular platforms for the access and core of converged networks. In addition to FCoE host and target support, the module provides VE-port support, allowing creating of FCoE Inter-Switch Links (ISLs) and enabling scalable, multi-hop FCoE topologies. The FCoE traffic in a Cisco Nexus 7000 Series Switch can be segmented using a dedicated storage virtual device context (VDC), providing isolation within the shared physical infrastructure. Cisco Nexus 7000 Series FCoE converged networks can be transparently bridged to Cisco® MDS 9500 Series Fibre Channel SANs with the Cisco MDS 10-Gbps 8-Port FCoE Module. This capability preserves existing and continued investments in Fibre Channel SANs and offers a single unified OS (Cisco NX-OS Software) and management platform (Cisco Data Center Network Manager [DCNM]) for both the LAN and SAN.

    The comprehensive feature set of the Cisco Nexus 7000 F2-Series Module includes classic Layer 2 and Layer 3 forwarding, with the feature richness offered by Cisco NX-OS Software: a modular multitasking and multithreaded operating system built with high availability, granular fault management, resiliency, and nondisruptive serviceability at its foundation. This extremely comprehensive set of Layer 2 and Layer 3 functions makes this module ideal for data center networks, where density, performance, and continuous system operation are critical.

    Besides the classic Layer 2 and Layer 3 forwarding capability, the Cisco Nexus 7000 F2-Series Module delivers Cisco FabricPath technology based on IETF TRILL. Cisco FabricPath consists of a set of multipath Ethernet technologies, combining the reliability and scalability benefits of Layer 3 routing with the flexibility and “plug-and-play” aspects of Layer 2 Ethernet networks.

    With Cisco FabricPath, organizations can now build resilient, flexible, and, when needed, massively scalable Layer 2 networks, no longer relying on Spanning Tree Protocol and its inherent bisectional bandwidth limitations. Cisco FabricPath protects enterprises’ investments by allowing existing Ethernet infrastructure to be connected to a Cisco FabricPath network. Enhanced virtual PortChannel (vPC+) technology is part of Cisco FabricPath and allows the redundant interconnection of classic Spanning Tree Protocol-based Layer 2 environments.

    The benefits of Cisco FabricPath include:

       Operational simplicity: Cisco FabricPath embeds an autodiscovery mechanism that does not require any additional platform configuration. By offering Layer 2 connectivity, this “VLAN anywhere” characteristic simplifies provisioning and offers workload flexibility across the network.

       High resiliency and performance: Since Cisco FabricPath is a Layer 2 routed protocol, it offers stability, scalability, and optimized resiliency along with network failure containment.

       Massively scalable fabric: By building a forwarding model on 16-way equal-cost multipath (ECMP), Cisco FabricPath helps prevent bandwidth bottlenecks and allows capacity to be added dynamically, without network disruption.

    The Cisco Nexus 7000 F2-Series Module can also be used in conjunction with the Cisco Nexus 2000 Series Fabric Extenders (Figure 2).

    Figure 2.      Cisco Nexus 2000 Series Fabric Extenders

    The Cisco Nexus 2000 Series Fabric Extenders comprise a category of data center products that provide a server-access platform that scales across a multitude of 1 Gigabit Ethernet, 10 Gigabit Ethernet, unified fabric, rack, and blade server environments. The Cisco Nexus 2000 Series Fabric Extenders are designed to simplify data center architecture and operations by dramatically reducing the points of management and by meeting the business and application needs of a data center. Working in conjunction with Cisco Nexus switches, the Cisco Nexus 2000 Series Fabric Extenders offer a cost-effective and efficient way to support today’s Gigabit Ethernet environments while allowing easy migration to 10 Gigabit Ethernet, virtual machine-aware Cisco unified fabric technologies.

    The Cisco Nexus 7000 F2-Series Module also delivers integrated FCoE, greatly simplifying the network infrastructure and reducing costs by enabling the deployment of unified data center fabrics to consolidate data center traffic onto a single, general-purpose, high-performance, highly available network. With the Cisco Nexus 7000 F2-Series Module, FCoE can be deployed in director-class modular platforms for the access and core of converged networks. In addition to FCoE host and target support, the module provides virtual expansion port (VE-port) support, allowing creation of FCoE Inter-Switch Links (ISLs) and enabling scalable, multi-hop FCoE topologies.

    Table 2 summarizes the features and benefits of the Cisco Nexus 7000 F2-Series Module.

    Table 2.       Features and Benefits

    Feature

    Benefit

    Support for 1 and 10 Gigabit Ethernet

    Each port can be used at 1 or 10 Gigabit Ethernet speed, allowing IT departments to migrate to 10 Gigabit Ethernet based on the unique requirements of their networks.

    Comprehensive Layer 2 and Layer 3 capabilities[1]

    The comprehensive set of Layer 2 and Layer 3 functions makes this module ideal for data center networks.

    Virtual Device Context (VDC)

    The F2-Series Cisco's VDC feature helps enable the virtualization of a single physical device in one or more logical devices. Each of the provisioned logical devices is configured and managed as if it were a separate physical device[2].

    Cisco FabricPath technology based on IETF TRILL

    Cisco FabricPath uses routing principles in the data plane and control plane to bring reliability and scalability to transparent bridging while maintaining flexibility and ease of use.

    Support for Cisco Nexus 2000 Series

    The Cisco Nexus 2000 Series Fabric Extenders are designed to simplify data center architectures and operations by dramatically reducing the points of management.

    FCoE support

    I/O consolidation at the access layer and core of the network reduces the physical infrastructure that needs to be acquired, managed, and maintained.

    Ideally suited for deployment in latency-sensitive environments

    Port-to-port latency is less than 6 microseconds, enabling support for latency-sensitive applications.

    Interface flexibility with SFP and SFP+ support

    Interface flexibility allows fulfillment of any Gigabit Ethernet and 10 Gigabit Ethernet deployment needs, per port, with a variety of media types.

    Efficient power use combined with high performance

    Power consumption is exceptionally low, typically less than 9W per port.

    VOQ with centralized arbitration

    This feature enables fairness when one or more destinations is congested and support for lossless unified fabric.

    Load sharing across all fabric modules

    Through the high-availability design, bandwidth is shared across all fabric modules simultaneously for optimal performance.

    Online insertion and removal (OIR)

    Hot insertion and removal is supported for continuous system operation.

    Identification (ID) LED

    Through the beacon feature, administrators can clearly identify the module for a service condition; ports on the I/O module can send beacons as well.

    Product Specifications

    Table 3 lists product specifications for the Cisco Nexus 7000 F2-Series Module. Tables 4 and 5 list specifications for transceivers. Not all optics are supported in the first software release. Refer to the release notes for up-to-date software version information to see what optics are supported.

    Table 3.       Product Specifications

    Item

    Specifications

    System

    Product compatibility

      Supported in all Cisco Nexus 7000 Series chassis

    Software compatibility

      Cisco NX-OS Software Release 6.0 or later (minimum requirement)

    Front-panel LEDs

      Status: Green (operational), red (faulty), or orange (module booting)
      Link: Green (port enabled and connected), orange (port disabled), off (port enabled and not connected), or blinking green and orange in conjunction with ID LED blue (port flagged for identification; beacon)
      ID: Blue (operator has flagged this card for identification; beacon) or off (module not flagged)

    Programming interfaces

      XML
      Scriptable command-line interface (CLI)
      Cisco Data Center Network Manager (DCNM) GUI

    Physical Interfaces

    Connectivity

      48 ports of 1 and 10 Gigabit Ethernet (SFP or SFP+ pluggable optic modules)

    Maximum port density

      768 ports of Gigabit Ethernet and 10 Gigabit Ethernet for 18-slot chassis
      384 ports of Gigabit Ethernet and 10 Gigabit Ethernet for 10-slot chassis
      336 ports of Gigabit Ethernet and 10 Gigabit Ethernet for 9-slot chassis
      96 ports of Gigabit Ethernet and 10 Gigabit Ethernet for 4-slot chassis

    Queues per port

    Configurable template-based queuing modes:

      Ingress (4q1t and 2q1t)
      Egress (1p3q1t, 2p2q1t, and 3p1q1t)

    VoQ buffer

      72 MB per module

    Scheduler

      Deficit-Weighted Round-Robin (DWRR)

    Jumbo frame support for bridged and routed packets

      Up to 9216 bytes

    Switch On Chip (SoC)

    Performance

      720-mpps Layer 2 and Layer 3 forwarding capacity for both IPv4 and IPv6 packets

    MAC address entries

      16,384 per SoC, and up to 196,608 per module (depending on VLAN allocation)

    VLAN

      4096 simultaneous VLANs per virtual device context (VDC)

    IPv4 entries

      32,768

    IPv6 entries

      16,384

    Adjacency entries

      16,384

    ACLs

      16,384 per SoC, and up to 196,608 per module (depending on ACL type and interface configuration)

    FCoE features

      T11 VF-, VN-, and VE-port for multi-hop FCoE
      T11 FCoE Initialization Protocol (FIP)
      Fibre Channel Forwarder (FCF)

    Advanced FCoE features

      Virtual SANs (VSANs)
      Inter-VSAN Routing (IVR)
      PortChannels (up to 16 links)
      SAN trunking
      Storage VDC

    Policers

      1024 per SoC

    Control Plane Policing (CPP)

      Supported

    Sampled NetFlow

      Up to 256 programmable sampling rates

    Fabric Interface

    Switch fabric interface

      550 Gbps in each direction (1.1 Tbps full duplex) distributed across up to five fabric modules

    OIR

      Online insertion and removal

    IEEE Data Center Bridging (DCB)

      Priority-based flow control (PFC): IEEE P802.1Qbb
      Enhanced transmission selection (ETS): IEEE P802.1Qaz
      Data Center Bridging Exchange (DCBX)

    Environmental

    Physical dimensions

      Occupies one I/O module slot in a Cisco Nexus 7000 Series chassis
      Dimensions (H x W x D): 1.733 x 15.3 x 21.9 in. (4.4 x 38.9 x 55.6 cm)
      Weight: 14 lb (6.3 kg); 16 lb (7.2 kg) with transceivers

    Power consumption

    Typical: 350W

    Maximum: 450W

    Environmental conditions

      Operating temperature: 32 to 104°F (0 to 40°C)
      Operational relative humidity: 5 to 90%, noncondensing
      Storage temperature: -40F to 158°F (-40 to 70°C)
      Storage relative humidity: 5 to 95%, noncondensing

    Regulatory compliance

      EMC compliance
      FCC Part 15 (CFR 47) (USA) Class A
      ICES-003 (Canada) Class A
      EN55022 (Europe) Class A
      CISPR22 (International) Class A
      AS/NZS CISPR22 (Australia and New Zealand) Class A
      VCCI (Japan) Class A
      KN22 (Korea) Class A
      CNS13438 (Taiwan) Class A
      CISPR24
      EN55024
      EN50082-1
      EN61000-3-2
      EN61000-3-3
      EN300 386

    Environmental standards

      NEBS criteria levels
      SR-3580 NEBS Level 3 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 5)
      Verizon NEBS compliance
      Telecommunications Carrier Group (TCG) Checklist
      Qwest NEBS requirements
      Telecommunications Carrier Group (TCG) Checklist
      ATT NEBS requirements
      ATT TP76200 level 3 and TCG Checklist
      ETSI
      ETSI 300 019-2-1, Class 1.2 Storage
      ETSI 300 019-2-2, Class 2.3 Transportation
      ETSI 300 019-2-3, Class 3.2 Stationary Use

    Safety

      UL/CSA/IEC/EN 60950-1 Second Ed
      AS/NZS 60950-1

    Warranty

    Cisco Nexus 7000 Series Switches come with the standard Cisco 1-year limited hardware warranty

    Table 4.       10 Gigabit Ethernet Interface Distances and Options

    10 Gigabit Ethernet SFP+ Part Number

    Wavelength (nanometers)

    Fiber and Cable Type

    Core Size (microns)

    Model Bandwidth (MHz per km)1

    Cable Distance2

    SFP-10G-SR
    SFP-10G-SR-S

    850

      MMF (FDDI-grade)
      MMF (OM1)
      MMF (400/400)
      MMF (OM2)
      MMF (OM3)
      MMF (OM4)
      62.5
      62.5
      50.0
      50.0
      50.0
      50.0
      160
      200
      400
      500
      2000
      4700
      26m
      33m
      66m
      82m
      300m
      400m

    SFP-10G-LRM

    1310

      MMF 6
      62.5
      50
      50
      500
      400
      500
      220m
      100m
      220m
      SMF
      G.652

     

      300m

    SFP-10G-LR
    SFP-10G-LR-S

    1310

      SMF
      G.652

    -

      10 km

    FET-10G

    850

      MMF (OM2)
      MMF (OM3 and OM4)
      50
      50
      500
      2000
      25m
      100m

    SFP-10G-ER
    SFP-10G-ER-S

    1550

      SMF
      G.652

    -

      40 km 3

    SPF-10G-ZR
    SFP-10G-ZR-S

    1550

      SMF
      G.652

    -

      80 km

    DWDM-SFP10G-xx.xx=

    4

      SMF

     

     

    5

    SFP-H10GB-CU1M

    -

      Twinax cable, passive, 30AWG cable assembly

    -

    -

      1m

    SFP-H10GB-CU1-5M

    -

      Twinax cable, passive, 30AWG cable assembly

    -

    -

      1.5m

    SFP-H10GB-CU2M

    -

      Twinax cable, passive, 30AWG cable assembly

    -

    -

      2m

    SFP-H10GB-CU2-5M

    -

      Twinax cable, passive, 30AWG cable assembly

    -

    -

      2.5m

    SFP-H10GB-CU3M

    -

      Twinax cable, passive, 30AWG cable assembly

    -

    -

      3m

    SFP-H10GB-CU5M

    -

      Twinax cable, 24AWG cable assembly

    -

    -

      5m

    SFP-H10GB-ACU7M

    -

      Twinax cable, active, 30 AWG cable assembly

    -

    -

      7m

    SFP-H10GB-ACU10M

    -

      Twinax cable, active, 28 AWG cable assembly

    -

    -

      10m

    SFP-10G-AOC1M

    -

      Active Optical Cable assembly

    -

    -

      1m

    SFP-10G-AOC2M

    -

      Active Optical Cable assembly

    -

    -

      2m

    SFP-10G-AOC3M

    -

      Active Optical Cable assembly

    -

    -

      3m

    SFP-10G-AOC5M

    -

      Active Optical Cable assembly

    -

    -

      5m

    SFP-10G-AOC7M

    -

      Active Optical Cable assembly

    -

    -

      7m

    SFP-10G-AOC10M

    -

      Active Optical Cable assembly

    -

    -

      10m
    1 Bandwidth is specified at transmission wavelength.
    2 Minimum cabling distance for -SR, -LRM, -LR, and -ER modules is 2m, according to IEEE 802.3ae.
    3 Links longer than 30 km are considered engineered links according to IEEE 802.3ae.
    4 40 different wavelengths offered. See the dense wavelength-division multiplexing (DWDM) SFP+ optics data sheet for additional product numbers and information: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/data_sheet_c78-711186.html.
    5 FCoE traffic is supported up to 70 km, in pure FCOE environment, with constant line rate on 10 Gig, only after assigning all buffers (follow method documented in CSCua10484) to one port on SOC via custom queuing policy. Please note that the other three ports on SOC will have no buffer credits left and will need to be shut down. Depending on type of traffic, customer can choose to assign percentage of buffers to non-drop (FCOE) class. Please note supported distance of cable length (with no-drops) would be reduced depending on amount of burst.
    6 A mode-conditioning patch is required for use over legacy multimode fiber types such as FDDI-grade, OM1and OM2. Please refer to the product bulletin: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.

    Note:    Complete 10 Gigabit Ethernet transceiver information can be found at http://cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html.
    Please refer to the release notes for software version requirement information.

    Table 5.       Gigabit Ethernet Interface Distances and Options

    Gigabit Ethernet SFP Part Number

    Wavelength (nm)

    Fiber and Cable Type

    Core Size (microns)

    Model Bandwidth (MHz per km)

    Cable Distance

    GLC-SX-MM
    SFP-GE-S
    GLC-SX-MMD

    850

    MMF (FDDI-grade)

    MMM (OM1)
    MMF (400/400)

    MMF (OM2)

    MMF (OM3 and OM4)

    62.5

    62.5

    50

    50

    50

    160

    200

    400

    500

    2000

    220

    275

    500

    550

    1000

    GLC-LH-SM
    SFP-GE-L
    GLC-LH-SMD

    1310

    MMF1

    62.5

    50

    50

    500

    400

    500

    550

    550

    550

    SMF

    G.652

    -

    10 km

    GLC-ZX-SM
    SFP-GE-Z
    GLC-ZX-SMD

    1550

    SMF

    G.652

    -

    70 to 100 km2

    GLC-T
    SFP-GE-T

     

    Category 5

    -

    -

    100m

    GLC-BX-U

    1310

    SMF

    G.652

    -

    10 km

    GLC-BX-D

    1490

    SMF

    G.652

    -

    10 km

    CWDM-SFP-1xxx=

    3

    SMF

    -

    -

    -

    DWDM-SFP-xxxx=

    4

    SMF

    -

    -

    -

    1 A mode-conditioning patch is required for use over legacy multimode fiber types such as FDDI-grade, OM1and OM2. Please refer to the product bulletin: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.
    2 1000BASE-ZX SFP can reach up to 100 km by using dispersion-shifted SMF or low attenuation SMF; the distance depends on fiber quality, number of splices, and connectors.
    3 8 different wavelengths offered. See the coarse wavelength-division multiplexing (CWDM) SFP optics data sheet for additional product numbers and information: http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6575/product_data_sheet09186a00801a557c.html.
    4 40 different wavelengths offered. See the dense wavelength-division multiplexing (DWDM) SFP optics data sheet for additional product numbers and information: http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/product_data_sheet0900aecd80582763.html.

    Note:    Complete Gigabit Ethernet transceiver information can be found at http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.html.
    Please refer to the release notes for software version requirement information.

    Ordering Information

    To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center. Table 6 provides ordering information.

    Table 6.       Ordering Information

    Product Name

    Part Number

    Nexus 7000 - F2-Series 48 Port 1G/10G Ethernet Module, SFP/SFP+ (and spare)

    N7K-F248XP-25

    N7K-F248XP-25=

    FCoE License for Nexus 7000 48-port 10G SFP+ (F2) (and spare)

    N7K-FCOEF248XP

    N7K-FCOEF248XP=

    Service and Support

    Cisco offers a wide range of services to help accelerate your success in deploying and optimizing Cisco Nexus 7000 Series Switches in your data center. Our innovative services are delivered through a unique combination of people, processes, tools, and partners and are focused on helping you increase operating efficiency and improve your data center network. Cisco Advanced Services uses an architecture-led approach to help you align your data center infrastructure with your business goals and provide long-term value. Cisco SMARTnet® Service helps you resolve mission-critical problems with direct access at any time to Cisco network experts and award-winning resources. With this service, you can take advantage of the Cisco Smart Call Home service capability, which offers proactive diagnostics and real-time alerts on your Cisco Nexus 7000 Series Switches. Spanning the entire network lifecycle, Cisco Services helps increase investment protection, optimize network operations, support migration, and strengthen your IT expertise. For more information about Cisco Data Center Services, visit http://www.cisco.com/go/dcservices.

    For More Information

    For more information about the Cisco Nexus 7000 Series, visit the product homepage at http://www.cisco.com/go/nexus or contact your local account representative.

     

     

     

    Additional Information

    SKU N7K-F248XP-25-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/data_sheet_c78-685394.html
    Condition Refresh
    Module Type Fiber Module Card

    N7K-F248XP-25-RF

    AED

    AED 0

    0