N7K-SUP1-RF

Double click on above image to view full picture

Zoom Out
Zoom In

N7K-SUP1-RF

Description:

Cisco Refurbished
Original Part No : N7K-SUP1=

Nexus7000Supervisor Incl External 8GBLogFlash REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 25000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® Nexus 7000 Switches Supervisor Module (Figure 1) scales the control plane and data plane services for the Cisco Nexus 7000 Switches system in scalable data center networks.

    Figure 1.      Cisco Nexus 7000 Switches Supervisor Module

    Product Overview

    The Cisco Nexus 7000 Switches comprise a modular data center-class product line designed for highly scalable 10 Gigabit Ethernet networks with a fabric architecture that scales beyond 15 terabits per second (Tbps). Designed to meet the requirements of the most mission- critical data centers, it delivers continuous system operation and virtualized, pervasive services. The Cisco Nexus 7000 Switches is based on a proven operating system, with enhanced features to deliver real-time system upgrades with exceptional manageability and serviceability. Its innovative design is purpose built to support end-to-end data center connectivity, consolidating IP, storage, and interprocess communication (IPC) networks onto a single Ethernet fabric.

    The Cisco Nexus 7000 Supervisor Module is designed to deliver scalable control plane and management functions for the Cisco Nexus 7000 Series chassis. It is based on a dual core processor that scales the control plane by harnessing the flexibility and power of the dual cores. The supervisors control the Layer 2 and 3 services, redundancy capabilities, configuration management, status monitoring, power and environmental management, and more. It provides centralized arbitration to the system fabric for all line cards. The fully distributed forwarding architecture allows the supervisor to support transparent upgrades to higher forwarding capacity- capable I/O and fabric modules. The supervisor incorporates an innovative dedicated connectivity management processor (CMP) to support remote management and troubleshooting of the complete system. Two supervisors are required for a fully redundant system, with one supervisor module running as the active device and the other in hot standby mode, providing exceptional high-availability features in data center-class products.

    Features and Benefits

    Supervisor Module

    The Cisco Nexus 7000 Supervisor Module delivers a comprehensive set of features to address the needs of the most demanding data center deployments.

       Continuous system operation

         Active and standby supervisor

         Segmented and redundant out-of-band provisioning and management paths

         Virtualization of the management plane

         Integrated diagnostics and protocol decoding with an embedded control plane packet analyzer

       Upgradeable architecture

         Fully decoupled control plane and data plane with no hardware forwarding on the module

         Distributed forwarding architecture, allowing independent upgrades of the supervisor and fabric Unified Fabric ready

         Transparent upgrade capacity and capability; designed to support 40 Gigabit and 100 Gigabit Ethernet

       Superior operational efficiency

         System locator and beacon LEDs for simplified operations

         Dedicated out-of-band management processor for ‘lights out’ management

    Supervisor Connectivity Management Processor (CMP)

    The CMP provides a complete out-of-band management and monitoring capability independent from the primary operating system. The CMP enables ‘lights out’ remote monitoring and management of the supervisor module, all modules and the Cisco Nexus 7000 Series system without the need for separate terminal servers with the associated additional complexity and cost. The CMP delivers the remote control through its own dedicated processor, memory, and boot flash memory and a separate Ethernet management port. The CMP can reset all system components, including power supplies; it can also reset the host supervisor module to which it is attached, allowing a complete system restart.

    Table 1 summarizes the features and benefits of the Cisco Nexus 7000 Supervisor Module.

    Table 1.       Features and Benefits

    Feature

    Benefit

    Supervisor

    High-performance dual-core Intel Xeon processor

    The multithreaded operating system runs on a dedicated dual-core processor. The flexible dual-core design harnesses the maximum processing power for control plane processing with enhanced reliability.

    High availability

    Two supervisor modules operate in active and standby modes with stateful supervisor failover to enhance total system availability.

    Resilient dedicated connectivity to each fabric and I/O module slot

    Dual redundant Ethernet out-of-band channels to each module and fabric provide resilience for communication between the control and line card processors.

    Centralized arbiter

    Active-active control of the flow of traffic through the switch fabric helps ensure transparent switchover with no losses.

    Virtual output queuing

    A quality-of-service (QoS) aware lossless fabric avoids the problems associated with head-of-line blocking.

    Secure Cisco Media Access Control Security (IEEE 802.1AE) enabled management port

    Secure access to switch management is provided (not available at first customer shipment [FCS]).

    Embedded packet analyzer

    An advanced integrated troubleshooting tool reduces the need for dedicated protocol analyzers and provides faster resolution of control plane problems.

    Front-panel LEDs

    LEDs provide visible indication of the supervisor ID, active or standby status, power management, and activity on the compact flash drive.

    Identification (ID) LED

    Using the beacon feature, the administrator can clearly identify the chassis and supervisor module.

    USB ports

    Ports enable access to USB flash memory devices for software image loading and recovery.

    Log and expansion flash memory

    Removable devices can be used for logging and software images.

    Compact flash memory slot cover

    The cover protects against accidental damage or removal.

    CMP

    Dedicated operating environment

    An independent remote system management and monitoring capability allows ‘lights out’ management of the system.

    Monitoring of supervisor status and initiation of resets

    Remote monitoring removes the need for separate terminal server devices for out-of-band management.

    System reset while retaining out-of-band Ethernet connectivity

    The need for onsite support during system maintenance is reduced.

    Capability to view boot-time messages remotely

    Complete visibility during the entire boot process simplifies remote operations.

    Capability to initiate a complete system power shutdown and restart

    Local operator intervention is not needed to reset power for devices.

    Login authentication

    Authentication provides secure access to the out-of-band management environment.

    Access to supervisor logs

    Access to critical log information enables rapid detection and prevention of potential system problems.

    Capability to take full console control of the supervisor

    Complete control is delivered to the operating environment.

    Dedicated front-panel LEDs

    LEDs clearly identify the CMP status separate from that of the supervisor.

    Note:    Not all Cisco Nexus 7000 Supervisor Module features are enabled in the first software release. Refer to the release notes for up-to-date software version information to see what features are supported.

    Supervisor redundancy

    Two supervisor modules are required in a Cisco Nexus 7000 system for high availability with active standby redundancy, where one supervisor module is operationally active, and the standby device serves as a hot backup. Out-of-band access to both supervisors is available from either CMP.

    Advanced diagnostics and troubleshooting tools

    Management of large-scale data center networks requires proactive management tools to verify connectivity and mechanisms for capturing and analyzing traffic. The Cisco Nexus 7000 Supervisor Module incorporates highly advanced analysis and debugging capabilities. The Power- On Self-Test (POST) and Cisco Generic Online Diagnostics (GOLD) provide proactive health monitoring both at startup and during system operation. The supervisor module uniquely provides a built-in packet capture and protocol decoding tool that allows analysis of control plane traffic to improve network planning, provide faster operation response times to events, and reduce operating costs.

    Figure 2 shows supervisor module connectivity and indicators.

    Figure 2.      Cisco Nexus 7000 Supervisor Module Connectivity and Indicators

    Product Specifications

    Table 2 lists the specifications for the Cisco Nexus 7000 Supervisor Module.

    Table 2.       Product Specifications

    Item

    Specifications

    Product compatibility

    Cisco Nexus 7009, 7010, 7018 Switches

    Software compatibility

    Cisco NX-OS Software Release 4.0 or later (minimum)

    Cards, ports and slots

    Two supervisor modules required per system for high availability

    Interfaces

      Supervisor management port: 10/100/1000-Mbps Ethernet port, support for inline encryption through MAC security (IEEE 802.1AE)
      CMP management port: 10/100/1000-Mbps Ethernet port
      Console serial port: RJ45 connector
      Auxiliary serial port: RJ45 connector
      3 USB ports: 2 host and 1 device port for peripheral devices

    Memory

      DRAM: 4 GB
      Flash memory: 2 GB
      NVRAM: 2 Mb battery backup

    Options

      Removable storage; 2 external type II compact flash memory slots:
       Log (8 GB)
       Expansion (2 GB)

    Reliability and availability

      Online insertion and removal (OIR)

    MIBs

    Simple Network Management Protocol (SNMP) Versions 3, 2c and 1 supported; see Cisco NX-OS Software release notes for details of specific MIB support

    Network management

      Cisco Data Center Network Manager (DCNM) 4.0
      Cisco VFrame Data Center 1.2

    Programming interfaces

      Extensible Markup Language (XML)
      Scriptable command-line interface (CLI)
      Cisco DCNM 4.0 Web Services

    Physical specifications

      Occupies one supervisor slot in a Cisco Nexus 7000 Series chassis
      Dimensions (H x W x D): 1.2 x 15.3 x 21.9 in. (3.0 x 38.9 x 55.6 cm)
      Weight: 10 lb (4.5 kg)

    Environmental conditions

      Operating temperature: 32 to 104°F (0 to 40°C)
      Operational relative humidity: 5 to 90%, noncondensing
      Storage temperature: -40 to 158°F (-40 to 70°C)
      Storage relative humidity: 5 to 95%, noncondensing

    Regulatory compliance

      EMC compliance
      FCC Part 15 (CFR 47) (USA) Class A

    Environmental standards

       

    Safety

      UL/CSA/IEC/EN 60950-1
      AS/NZS 60950

    Warranty

      Cisco Nexus 7000 Series Switches come with the standard Cisco 1-Year Limited Hardware Warranty

    Software Requirements

    The Cisco Nexus 7000 Supervisor Module is supported in Cisco NX-OS Software. The minimum software version is Cisco NX-OS Software Release 4.0 or later.

    Ordering Information

    To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center. Table 3 provides ordering information.

    Table 3.       Ordering Information

    Product Name

    Part Number

    Cisco Nexus 7000 Supervisor Module, Includes External 8Gb flash

    Cisco Nexus 7000 Supervisor Module, Includes External 8Gb flash Spare

    N7K-SUP1

    N7K-SUP1=

    Cisco Nexus 7000 - Compact Flash Memory - 2 GB (Expansion Flash)

    Cisco Nexus 7000 - Compact Flash Memory - 2 GB (Expansion Flash) Spare

    N7K-CPF-2GB

    N7K-CPF-2GB=

    Cisco Nexus 7000 - Compact Flash Memory - 8 GB (Log Flash) Spare

    N7K-CPF-8GB=

    Service and Support

    Cisco offers a wide range of services to help accelerate your success deploying and optimizing Cisco Nexus 7000 Switches in your data center. Our innovative services are delivered through a unique combination of people, processes, tools, and partners, and are focused on helping you increase operational efficiency and improve your data center network. Cisco Advanced Services use an architecture-led approach to help you align your data center infrastructure to your business goals and provide long-term value. Cisco SMARTnet® Service helps you resolve mission critical problems with direct access anytime to Cisco network experts and award-winning resources. With this service, you can take advantage of the Smart Call Home service capability that offers proactive diagnostics, and real-time alerts on your Cisco Nexus 7000 switches. Spanning the entire network lifecycle, Cisco Services help maximize investment protection, optimize network operations, provide migration support, and strengthen your IT expertise. For more information about Cisco Data Center Services, visit: http://www.cisco.com/go/dcservices.

    Cisco Capital

    Financing to Help You Achieve Your Objectives

    Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive.
    We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.

    For More Information

    For more information about the Cisco Nexus 7000 Switches, visit the product homepage at: http://www.cisco.com/go/nexus or contact your local account representative.

     

     

     

    Additional Information

    SKU N7K-SUP1-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/Data_Sheet_C78-437758.html
    Condition Refresh
    Module Type Supervisor Engine

    N7K-SUP1-RF

    AED

    AED 0

    0