PRP-2-RF

Double click on above image to view full picture

Zoom Out
Zoom In

PRP-2-RF

Description:

Cisco Refurbished
Original Part No : PRP-2=

Cisco 12000 Performance Router Processor 2 REMANUFACTURED
AED 39,494

Availability: In stock


Available Quantity: 5

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® XR 12000 and 12000 Series Performance Route Processor-2 (PRP-2) is the next-generation route processor for allCisco XR 12000 and 12000 series routers. The Cisco PRP-2 offers up to 100-percent performance improvement on most system tasks, up to 4 GB of memory, a Gigabit Ethernet management port, and a hard drive option. The Cisco PRP-2 delivers the scalability needed for service and network convergence. It also provides a Building Integrated Timing Supply (BITS) interface, a component of the Cisco XR 12000 and Cisco 12000 series BITS architecture that will enable network service synchronization on the platform in the future.

    Product Overview

    The Cisco PRP-2 (Figure 1) is the next-generation route processor for the Cisco XR 12000 and 12000 series routers, addressing the unique route processing requirements of carrier-grade IP and Multiprotocol Label Switching (MPLS) packet infrastructures. It is responsible for the following functions:

    • Executing routing protocol stacks

    • Performing all protocol communications with other routers

    • Building and distributing forwarding information to all line cards

    • Uploading the operating system software system images to all installed line cards upon powering up

    • Providing out-of-band system console and auxiliary ports and an Ethernet port for router configuration and maintenance

    • Monitoring and managing the power and temperature of system components such as line cards, power supplies, and fans

    Figure 1. Cisco XR 12000 and 12000 Series PRP-2

    The Cisco PRP-2 delivers all these functions with enhanced performance and capabilities. It also delivers the following feature enhancements (depending on the software version running):

    • Gigabit Ethernet management port

    • Hard-drive support (optional part)

    • BITS input ports

    • Up to 4 GB compact image Flash memory support (optional part)

    • Memory scalability up to 4 GB

    The Cisco XR 12000 and 12000 series routers are a portfolio of intelligent routing solutions that scale from 2.5 to n x 10 Gbps/slot capacity, enabling carrier-class IP/MPLS networks and accelerating the evolution toward IP Next-Generation Networks. Built upon a foundation of investment protection, this portfolio delivers up to 1.28 terabits per second switching capacity with wire-speed feature performance, scalability, and graceful hardware and software upgrade paths.
    For a detailed list of feature support for Cisco IOS ® XR Software and Cisco IOS Software on these products, refer to the release notes of the appropriate version.

    Product Specifications

    Table 1. Technical Specifications

     

     

    Description

    Specification

    Chassis Compatibility

    • Cisco 12816, 12810, 12416, 12410, 12406, 12404, 12016, 12012, 12010, 12008, 12006, and 12004 routers
    • Cisco XR 12416, XR 12410, XR 12406, XR 12404, XR 12016, XR 12010, XR 12006, and XR 12004 routers

    PRP-2 Memory Options

    • One or two 1-GB synchronous dynamic RAM (SDRAM)
    • One or two 2-GB SDRAM modules
    • 64-MB Advanced Technology Attachment (ATA) PC Card
    • 128-MB ATA PC Card
    • 256-MB ATA PC Card
    • 512-MB ATA PC Card
    • 1-GB ATA PC Card
    • 2-GB ATA PC Card
    • 4-GB ATA PC Card
    • 1-GB compact flash for image storage
    • 2-GB compact flash for image storage
    • 4-GB compact flash for image storage
    • 40-GB hard drive

    Connectivity

    • Console port (RJ-45 connector)
    • Auxiliary port (RJ-45 connector)
    • Two 10/100 Ethernet ports (RJ-45 connectors)
    • One 10/100/1000 Ethernet port over copper (with Cisco IOS Software Release 12.0(30)S)
    • Two RJ-48 connectors for BITS input clocks (for future BITS option)

     

    Table 2. Power Requirements

     

     

    Description

    Specification

    Power

    60W

    Indicators

    Alphanumeric and LED status display

     

    Table 3. Physical and Environmental Specifications

     

     

    Description

    Specification

    Temperature

    • Operating: 32 to 104°F (0 to 40°C)
    • Storage: -4 to 149°F (-20 to 65°C)

    Humidity

    • Operating (noncondensing): 10-90%
    • Storage (noncondensing): 5-95%

    Dimensions (H x W x D)

    14.5 x 1.25 x 18.5 in. (36.8 x 3.2 x 45.7 cm) (occupies single thin slot)

    Weight

    6.0 lb (2.7 kg)

     

    Table 4. Regulatory Approvals

     

     

    Description

    Specification

    Safety

    • UL 60950
    • CSA 22.2-No. 60950
    • EN60950
    • IEC 60950 CB Scheme
    • ACA TS001
    • AS/NZS 3260

    EMI

    • FCC Class A
    • ICES 003 Class A
    • AS/NZS 3548 Class B
    • CISPR 22 Class B
    • EN55022/EN50082-1 Class B
    • ETSI EN 300 386 (EN55022 Class B)
    • VCCI Class B

    Immunity

    • EN 61000-4-2, ESD Level 4 (15-kV air, 8-kV contact)
    • EN 61000-4-3, radiated immunity Level 3 (10V/m)
    • EN 61000-4-4 EFT Level 4
    • EN 61000-4-5 surge
    • EN 61000-4-6 conducted immunity Level 3 (10V)
    • EN 61000-4-11 voltage dips and sags
    • EN 55024

    ETSI

    EN 300 386/EN 300 386-2 Class B

    Network Equipment Building Standards (NEBS)

    This product is designed to meet the following requirements (qualification in progress):

    • SR-3580---NEBS: criteria levels (Level 3 compliant)
    • GR-63-Core---NEBS: physical protection
    • GR-1089-Core---NEBS: EMC and safety

     

    Availability and Ordering

    Table 5. Ordering Information

     

     

    Product Description

    Part Number

    Cisco XR 12000 and 12000 Series Performance Router Processor-2

    • PRP-2
    • XR-PRP-2

    Cisco XR 12000 and 12000 Series Performance Router Processor-2 (redundant option)

    • PRP-2/R
    • XR-PRP-2/R

    Cisco XR 12000 and 12000 Series Performance Router Processor-2 (spare)

    • PRP-2=

    Cisco 12000 Series One 1-GB SDRAM

    • MEM-PRP-1G
    • MEM-PRP-1G=

    Cisco 12000 Series Two 1-GB SDRAM, available as factory upgrade only

    • 2MEM-PRP2-1G

    Cisco 12000 Series 2-GB SDRAM

    • MEM-PRP2-2G
    • XR-MEM-PRP2-2G
    • MEM-PRP2-2G=

    Cisco 12000 Series 4-GB SDRAM

    • MEM-PRP2-4G
    • XR-MEM-PRP2-4G

    Cisco 12000 Series 64-MB ATA PC Card (flash disk)

    • MEM-12KRP-FD64M
    • MEM-12KRP-FD64M=

    Cisco 12000 Series 128-MB ATA PC Card (flash disk) (and spare)

    • MEM-12KRP-FD128M
    • MEM-12KRP-FD128M=

    Cisco 12000 Series 256-MB ATA PC Card (flash disk) (and spare)

    • MEM-12KRP-FD256M
    • MEM-12KRP-FD256M=

    Cisco 12000 series 512-MB ATA PC Card (flash disk) (and spare)

    • MEM-12KRP-FD512M
    • MEM-12KRP-FD512M=

    Cisco 12000 Series 1-GB ATA PC Card (flash disk) (and spare)

    • MEM-12KRP-FD1G
    • MEM-12KRP-FD1G=

    Cisco 12000 series 2-GB ATA PC Card (flash disk) (and spare)

    • MEM-FD2G
    • XR-MEM-FD2G
    • MEM-FD2G=

    Cisco 12000 series 4-GB ATA PC Card (flash disk) (and spare)

    • MEM-FD4G
    • MEM-FD4G=

    Cisco 12000 Series 40-GB Hard Drive for PRP-2 (and spare)

    • HD-PRP2-40G
    • HD-PRP2-40G=

    Cisco 12000 series 2-GB Compact Flash Module for PRP-2 (and spare)

    • FLASH-2G
    • XR-FLASH-2G
    • FLASH-2G=

    Cisco 12000 series 4-GB Compact Flash Module for PRP-2 (and spare)

    • FLASH-4G
    • FLASH-4G=

    Cisco 12000 Series 1-GB Compact Flash Module for PRP-2 (and spare)

    • FLASH-PRP2-1G
    • FLASH-PRP2-1G=

    Additional Information

    SKU PRP-2-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/12000-series-routers/product_data_sheet0900aecd800f414a.html
    Condition Refresh
    Module Type Performance Route Processor

    PRP-2-RF

    AED

    AED 39,494

    0