RSP720-3CXL10GE-RF

Double click on above image to view full picture

Zoom Out
Zoom In

RSP720-3CXL10GE-RF

Description:

Cisco Refurbished
Original Part No : RSP720-3CXL-10GE=

C7600 Route SwitchProcessor720Gbps PFC3CXL10G REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 57600

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Product Overview

    The Cisco® 7600 Series Route Switch Processor 720 with 10 Gigabit Ethernet uplinks (RSP720-10GE) is designed to deliver the high scalability, performance, and fast convergence required for today and tomorrow's demanding voice, video, data, and mobility (quadruple-play) services. The Cisco 7600 Series RSP720-10GE (Figure 1) offers Carrier Ethernet service providers tremendous flexibility, scalability, and performance at the access or aggregation edge while deploying advanced IP video and triple-play (voice, video, and data) system applications in both the residential and business services markets. In essence, it gives service providers and enterprises true service convergence with the ability to manage a wide variety of applications over a range of access media using a single platform, the Cisco 7600 Series Routers.

    Figure 1. The Cisco 7600 Route Switch Processor 720 with 10 Gigabit Ethernet Uplinks

     

    The Cisco 7600 Series RSP720-10GE includes the following:

    ● Two X2-based 10 Gigabit Ethernet ports (with line rate forwarding)

    ● Two Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports and one 10/100/1000 gigabit port for additional flexibility: This port-level flexibility allows you to position the Cisco 7600 Series at the access edge connecting with a 10 Gigabit Ethernet port uplink and a Gigabit Ethernet port uplink. The two 10 Gigabit Ethernet uplink ports help save a slot that you can use for an additional high-density Ethernet module, shared port adapter (SPA), or SPA interface processor (SIP).

    ● Crossbar switch fabric: The Cisco 7600 Series RSP720-10GE has a new and enhanced 720-Gbps crossbar switch fabric and the same new application-specific integrated circuit (ASIC)-based forwarding engine that is used by the Cisco RSP720. This single module delivers 40 Gbps of switching fabric capacity per slot, supporting 4-port 10 Gigabit Ethernet and 48-port 10/100/1000 density line cards.

    ● Standby as an independent forwarding line card: In a redundant configuration, the Cisco 7600 Series RSP720-10GE introduces the unique capability of the standby processor being able to operate as an independent distributed forwarding line card.

    With hardware-enabled forwarding for IPv4, IPv6 Unicast and Multicast, and Multiprotocol Label Switching (MPLS), the Cisco 7600 Series RSP720-10GE can provide high-speed central forwarding with rich packet-processing features such as access control lists (ACLs), quality of service (QoS), MPLS VPNs, and more. The Cisco 7600 Series RSP720-10GE delivers a rich set of IP features in hardware for applications such as subscriber aggregation, IP Forwarding, Layer 2 and Layer 3 MPLS VPNs, and Ethernet over MPLS (EoMPLS) with QoS and security features.

    The Cisco 7600 Series RSP720-10GE comes integrated with two new daughter cards:

    ● Cisco 7600 Policy Feature Card (PFC-3C or PFC-3CXL): Performs Layer 2 and Layer 3 forwarding inhardware with consistent performance, even with intensive features enabled such as ACLs, QoS, genericrouting encapsulation (GRE), or Network Address Translation (NAT). The card executes the followingfunctions:

    ◦ Performs Layer 2 and Layer 3 forwarding

    ◦ Enforces ACL functions

    ◦ Performs QoS policing and marking

    ◦ Collects NetFlow statistics

    ◦ Offers Control Plane Policing (CoPP)

    ● Cisco 7600 Multilayer Switch Feature Card (MSFC4): Runs Layer 2 and Layer 3 protocols and performs all the control-plane functions.

    High-Level Hardware and Software Support Specifications

    Table 1. Support Specifications

    Description

    Specification

    Software compatibility

    ● The Cisco 7600 Series RSP720-10GE is generally available from the Cisco IOS ® Software 12.2(33)SRE release train.
    ● Support for the RSP720-10GE is only available on a limited basis for Cisco IOS Software 12.2(33)SRC, 12.2(33)SRD release trains.

    Supported chassis and line cards

    Cisco 7603-S, 7604, 7606-S, 7609, 7609-S, and 7613* models

    * The Cisco 7613 is only supported from Software Release 12.2(33)SRE2 onwards. The RSP720-10GE will not support 7613 chassis with earlier IOS release.

    The Cisco 7606 is not supported in any version with the RSP720-10GE

    All of the Ethernet Services Plus modules (Cisco 7600 Series ES+) are supported

    SIPs and SPAs:

    ● Cisco 7600 Series SPA Interface Processor-600 (Cisco 7600 SIP 600)
    ● Cisco 7600 Series SPA Interface Processor-400 (Cisco 7600 SIP 400)
    ● Cisco 7600 Series SPA Interface Processor-200 (Cisco 7600 SIP 200)

    Cisco 7600 Series/Catalyst® 6500 Series Enhanced FlexWAN Module

    All of the Cisco 7600 Series Ethernet services modules are supported

    High-density Ethernet cards (part numbers):

    • WS-X67xx (WS-X6704-10GE and WS-X6708-10GE are both supported)
    • WS-X65xx
    • WS-X64xx
    • WS-X61xx

    Distributed forwarding cards (part numbers)*:

    • DFC3C
    • DFC3CXL
    • DFC3B
    • DFC3BXL

    ** Note that the rule of the least common denominator applies in a Cisco 7600 Series chassis and the lowest level of PFC or DFC dictates at which level the entire chassis operates. A DFC3B forces the Cisco 7600 Series configuration to run in 3B mode, regardless of the PFC-3C (or -3CXL) of theRSP720-10GE.

    Optics support

    10 Gigabit Ethernet:

    ● X2-10GB-SR=
    • X2-10GB-CX4=
    • X2-10GB-LX4=
    • X2-10GB-LR=
    • X2-10GB-ER=
    • X2-10GB-LRM= (12.2(33)SRE and later)
    • X2 10GB-ZR= (12.2(33)SRE and later)
    • X2-DWDM (12.2(33)SRE and later)

    Gigabit Ethernet:

    • GLC-T=
    • GLC-SX-MM=
    • GLC-LH-SM=
    • GLC-ZX-SM=
    • GLC-BX-D=
    • GLC-BX-U=
    • SFP-GE-T=
    • SFP-GE-S=
    ● SFP-GE-L=

    Features and Benefits

    Table 2 lists the features and benefits of the Cisco 7600 Series RSP720-10GE.

    Table 2. Features and Benefits of Cisco 7600 Series RSP720-10GE

    Feature

    Benefits

    Integrated 720-Gbps switch fabric

    ● Offers Layer 2 forwarding rates of up to 30 million packets per second (Mpps)
    (Centralized Forwarding)
    ● Provides bandwidth capacity of 40 Gbps per slot
    ● Allows additional slots for increased port density

    Hardware-based Cisco Express Forwarding

    ● Offers Layer 3 (IP and MPLS) forwarding rates of 30 Mpps (Centralized Forwarding)

    10 Gigabit Ethernet and Gigabit Ethernet port options

    ● Offers two 10 Gigabit Ethernet and three Gigabit Ethernet port options
    (including one 10/100/1000 RJ-45 port) on the RSP

    Faster CPU and added memory

    ● Performance improvements, including:

    ◦ Faster protocol convergence times

    ◦ Improved Internet Group Management Protocol (IGMP) snooping times

    ◦ Improved router bootup times

    ◦ Faster rates of establishing Dynamic Host Configuration Protocol (DHCP) server and Label Distribution Protocol (LDP)

    ◦ IP sessions and Traffic Engineering

    High-density residential subscribers aggregation

    ● Allows customers to support a combination of Layer 2 VPN (L2VPN) and L3VPN features for use in a quadruple-play network

    Hardware Features of the Cisco 7600 Series RSP720-10GE

    Table 3. Hardware Features of Cisco 7600 Series RSP720-10GE

    Features

    RSP720-3C-10GE

    RSP720-3CXL-10GE

    Memory (route processor/switch processor)

    Up to 4 GB/Up to 2 GB

    Up to 4 GB/Up to 2 GB

    Compact Flash memory

    512 MB/1 GB

    512 MB/1 GB

    Nonvolatile RAM (NVRAM)

    4 MB

    4 MB

    File Allocation Table (FAT) 32 file system

    Supported

    Supported

    Scalability

    Table 4. Scalability for Cisco 7600 Series RSP720-10GE

    Part Number

    RSP720-3C-10GE

    RSP720-3CXL-10GE

    IPv4 Routing

    In hardware: Up to 400 Mpps*

    In hardware: Up to 400 Mpps*

    IPv6 Routing

    In hardware: Up to 200 Mpps*

    In hardware: Up to 200 Mpps*

    Layer 2 bridging

    In hardware: Up to 400 Mpps*

    In hardware: Up to 400 Mpps*

    MPLS

    ● MPLS in hardware to enable use of Layer 3 VPNs and EoMPLS tunneling
    ● Up to 1024 Virtual Route Forwarding (VRF) with a total of up to 256,000 routes per system
    ● MPLS in hardware to enable use of Layer 3 VPNs and EoMPLS tunneling
    ● Up to 1024 VRF with a total of up to 1,000,000 routes per system

    Generic routing encapsulation (GRE)

    In hardware

    In hardware

    NAT

    Hardware assisted

    Hardware assisted

    Routes

    256,000 (IPv4); 128,000 (IPv6)

    1M (IPv4); 512K (IPv6)

    NetFlow entries

    128,000

    256,000

    * With distributed forwarding cards (DFCs)

    QoS Features

    Table 5. QoS Features of Cisco 7600 Series RSP720-10GE

    Feature

    RSP720-3C-10GE

    RSP720-3CXL-10GE

    Aggregate rate-limiting location

    Ingress port or VLAN and egress VLAN or Layer 3 port

    Ingress port or VLAN and egress VLAN or Layer 3 port

    Rate-limiting level types:

    Committed information rate(CIR) and peak information rate (PIR)

    CIR and PIR

    CIR and PIR

    Flow-based rate-limiting method; number of rates

    Per source address, destination address, or full flow; 64 rates

    Per source address, destination address, or full flow; 64 rates

    MAC ACLs featuring per-port and per-VLAN granularity

    Yes

    Yes

    Security Features

    Table 6. Security Features of Cisco 7600 Series RSP720-10GE

    Feature

    RSP720-3C-10GE

    RSP720-3CXL-10GE

    Port security

    Yes

    Yes

    IEEE 802.1x and 802.1x extensions

    Yes

    Yes

    VLAN and router ACLs and port ACLs

    Yes

    Yes

    Reflexive ACLs

    128,000

    256,000

    Unicast Reverse Path Forwarding (uRPF) check in hardware

    Up to 6 paths

    Up to 6 paths

    CPU rate limiters (denial-of-service [DoS] protection)

    10 special-case rate limiters plus CoPP

    10 special-case rate limiters plus CoPP

    Private VLANs

    Yes

    Yes

    MAC ACLs on IP

    Yes

    Yes

    TCP intercept hardware acceleration

    Yes

    Yes

    MPLS Features

    Table 7. MPLS Features

    Feature

    RSP720-3C-10GE

    RSP720-3CXL-10GE

    Interface support

    LAN and WAN interface modules as applicable

    LAN and WAN interface modules as applicable

    Label imposition and disposition (MPLS provider edge) and swapping (MPLS provider core)

    Yes

    Yes

    Label Distribution Protocol (LDP)

    Yes

    Yes

    Tag Distribution Protocol (TDP) support

    Yes

    Yes

    MPLS VPN

    Yes

    Yes

    VRF Lite

    Yes

    Yes

    QoS mechanisms using experimental (EXP) bits

    Yes

    Yes

    MPLS with Resource Reservation Protocol Traffic Engineering
    (MPLS-RSVP-TE)

    Yes

    Yes

    MPLS Differentiated Services (DiffServ)-Aware Traffic Engineering (MPLS-DS-TE)

    Yes

    Yes

    MPLS traceroute

    Yes; refer to release notes for details

    Yes; refer to release notes for details

    EoMPLS

    Yes

    Yes

    Routing and MIB Support

    Table 8. Routing and MIB Feature Support

    Description

    Specification

    Protocols

    Layer 3 routing protocols:

    ● Border Gateway Protocol Version 4 (BGPv4)
    ● Open Shortest Path First (OSPF)
    ● Intermediate System-to-Intermediate System (IS-IS)
    ● Routing Information Protocol (RIP)
    ● Distributed Forwarding Information Base (FIB) switching
    ● Cisco Discovery Protocol
    ● Internet Control Message Protocol (ICMP)

    Multicast Forwarding

    ● Protocol independent Multicast (PIM; both sparse and dense modes)
    ● (S,G)
    ● ( *,G)
    ● Bidirectional PIM in hardware

    Comprehensive MPLS support

    Cisco Group Management Protocol (GMP) and IGMP snooping

    MIBs

    MPLS LDP MIB

    ● MPLS Label Switch Router (LSR) MIB
    ● MPLS-TE MIB
    ● MPLS VPN MIB

    Please refer to software release notes and check the following MIB finder for more information: http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.

    Network management

    CiscoWorks

    Product Specifications and Compliance

    Table 9. Product Specifications and Compliance

    Description

    Specification

    Physical specifications

    (H x W x D): 1.57 x 15.35 x 17.05 in. (4 x 39 x 43.3 cm)

    Weight: 11.7 lb (5.336 kg)

    Power consumption

    RSP720-3CXL-10GE: 375W

    RSP720-3C-10GE: 355W

    Environmental conditions

    Operating temperature: 32 to 104°F (0 to 40°C)

    Storage temperature: -40 to 167°F (-40 to 75°C)

    Relative humidity: 10 to 90%, non-condensing

    Regulatory compliance

    Predicted mean time between failure (MTBF)

    80,000 hr

    Compliance

    CE Markings

    ● Safety
    ● UL 60950
    ● EN 60950
    ● CSA-C22.2 No. 60950
    ● IEC 60950
    ● AS/NZS 3260
    ● IEC 60825-1,-2
    ● EN 60825 -1,-2
    ● 21CFR1040-10
    ● TS001
    ● EMC
    ● FCC Part 15 (CFR 47) Class A
    ● ICES-003 Class A
    ● EN 55022 Class A
    ● CISPR 22 Class A
    ● AS/NZS 3548 Class A
    ● VCCI Class A
    ● EN55024
    ● ETS300 386
    • EN50082-1
    ● EN61000-6-1

    Emission

    ● 47 CFR Part 15: 2005
    ● CISPR22: 2005
    ● EN300386: V1.3.3 : 2005
    ● EN55022: 1994 [+ amd 1 & 2]
    ● EN55022: 1998
    ● EN61000-3-2: 2000
    ● EN61000-3-3: 1995 [+ amd 1: 2001]
    ● ICES-003 Issue 4 : 2004
    ● KN 22: 2005
    ● VCCI: V-3/2006.04

    Immunity

    ● CISPR24: 1997 [+ amd 1 & 2]
    ● EN300386: V1.3.3 : 2005
    ● EN50082-1: 1992
    ● EN50082-1: 1997
    ● EN55024: 1998 [+ amd 1 & 2]
    ● EN61000-6-1: 2001

    Ordering Information

    To place an order, visit the Cisco Ordering Home Page and refer to Table 10.

    ● The Cisco 7600 Series RSP720-10GE is generally available from the Cisco IOS Software 12.2(33)SRE release train.

    ● RSP720-10GE system bundles are available starting from the 12.2(33)SRE release train.

    ● Support for the RSP720-10GE is only available on a limited basis for 12.2(33)SRC and 12.2(33)SRD release trains.

    Please contact your Cisco sales representative for any further questions.

    Table 10. Ordering Information for Cisco 7600 Series RSP720-10GE

    Product Number

    Description

    RSP720-3C-10GE(=)

    Cisco 7600 Series RSP720-10GE with PFC-3C includes:

    • Two X2-based 10 GE ports
    • Two GE SFP ports and one 10/100/1000 gigabit port for additional flexibility
    • Integrated 720-Gbps switch fabric
    • PFC-3C and Multilayer Switch Feature Card (MSFC4)
    • Route processor: 1- to 4-GB DRAM (1-GB default)
    • Switch processor: 1- to 2-GB DRAM (1-GB default)
    • One external Compact Flash Type II slot
    • 4-MB nonvolatile RAM (NVRAM)
    • 512-MB internal boot memory (Compact Flash)

    RSP720-3CXL-10GE(=)

    Cisco 7600 Series RSP720-10GE with PFC-3CXL includes:

    ● Two X2-based 10 GE ports
    ● Two GE SFP ports and one 10/100/1000 gigabit port for additional flexibility
    ● Integrated 720-Gbps switch fabric
    ● PFC-3CXL (high capacity) and Multilayer Switch Feature Card (MSFC4)
    ● Route processor: 1- to 4-GB DRAM (2-GB default)
    ● Switch processor: 1- to 2-GB DRAM (1-GB default)
    ● One external Compact Flash Type II slot
    ● 4-MB NVRAM
    ● 512-MB internal boot memory (Compact Flash)

    MEM-RSP720-2G(=)

    This memory option upgrades RSP720-10GE RP memory from 1G to 2G

    MEM-RSP720-4G(=)

    This memory option upgrades RSP720-10GE RP memory from 2G to 4G

    MEM-RSP720-SP2G

    This memory option upgrades RSP720-10GE SP memory from the default 1G to 2G

    Additional Information

    SKU RSP720-3CXL10GE-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/7600-series-routers/product_data_sheet0900aecd8072579f.html
    Condition Refresh
    Module Type Route Switch Processor

    RSP720-3CXL10GE-RF

    AED

    AED 0

    0