SM-X-1T3/E3-RF

Double click on above image to view full picture

Zoom Out
Zoom In

SM-X-1T3/E3-RF

Description:

Cisco Refurbished
Original Part No : SM-X-1T3/E3=

One port T3/E3 Service module REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 10800

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The new Cisco® Packet-over-T3/E3 Service Module (SM-X-1T3/E3) provides high-speed WAN access for Cisco Integrated Services Routers (ISRs). The T3/E3 service module provides this connectivity on Cisco 2900 Series, 3900 Series, and 4451-X (ISR4451-X) Integrated Services Routers. The T3/E3 module offer both service providers and enterprise customers unprecedented flexibility in provisioning clear-channel T3 or E3 connections (Figure 1).

    Figure 1. Cisco T3/E3 Module

    The Cisco Packet-over-T3/E3 Service Module for the Cisco Integrated Services Routers offers the first software-configurable T3/E3 product from Cisco. This flexible T3/E3 module allows you to switch between T3 and E3 applications with a single Cisco IOS® Software command. This feature offers you increased flexibility and investment protection by allowing a Cisco partner, service provider, or enterprise customer to stock only a single product that can be deployed internationally.

    The increased demand for bandwidth over the WAN and more attractive pricing of T3/E3 links by service providers has led to steady growth in T3/E3 deployments around the world. The T3/E3 module eliminates the need for an external data service unit (DSU), reduces provisioning costs, and provides highly manageable T3/E3 line termination. The module provides an integrated line interface unit (LIU) DSU that allows T3 or E3 lines to be directly terminated on a Cisco router, eliminating the need for external DSU equipment, simplifying the T3/E3 line management, reducing provisioning cost, and freeing valuable rack space.

    The T3/E3 module supports the proprietary subrate and scrambling features of T3 DSU vendors such as Digital Link, Larscom, and ADC Kentrox. Subrate support in the module maximizes the utility of these products in service provider environments. By simultaneously supporting interoperability with a wide range of third-party DSU vendors, this module offers the flexibility to support installed equipment without locking customers into a proprietary solution.

    The Cisco T3/E3 Service Module provides direct connectivity to a T3 line for full-duplex communications at the T3 rate of 44.736 MHz and full-duplex E3 communications at 34.368 MHz. Each T3 or E3 port consists of a pair of 75‑ohm BNC coaxial connectors (Type RG-59), one for transmit data and one for receive data, along with six LED indicators for line status. The T3/E3 module is supported in all Cisco IOS Software feature sets, and there are no additional memory requirements.

    Key Benefits

    The combination of T3 and E3 options in a single module provides the following important customer benefits:

    Physical space savings: Eliminates the need for external DSU device, saving valuable rack space

    Simplified management: Eliminates the need for two separate monitoring tools

    Software-configurable T3/E3: Provides the flexibility to deploy a single module worldwide

    Key Features

    One-port T3 with DSU or E3 with DSU module

    T3/E3-specific features for monitoring, bit error rate tester (BERT), MIBs, alarms, and more

    Ability to independently or simultaneously enable scrambling and subrate in each DSU mode; support for the following DSU vendors' algorithms: Digital Link, Kentrox, Larscom, Verilink, and Adtran

    Support for the serial encapsulation protocols: Frame Relay, Point-to-Point Protocol (PPP), and High-Level Data Link Control (HDLC)

    16-bit cyclic redundancy check (CRC)

    Key Management Features

    Line and payload loopback capabilities

    DS-3 remote-line loopback (through Far-End Alarm and Control [FEAC] codes per American National Standards Institute [ANSI] T1.107a)

    Response to embedded loopback commands

    Insertion of loopback commands into transmitted signal

    Programmable pseudorandom pattern up to 32 bits long, including 223, 220, 215, 1s, 0s, and alt-0-1

    32-bit error count and bit-count registers

    Alarm detection-Alarm indication signal (AIS), remote alarm, far-end block error (FEBE), and out of frame (OOF)

    Onboard processor for Maintenance Data Link (MDL)

    T3/E3 Applications and Positioning

    The Cisco T3/E3 Service Module provides the performance requirements to deploy advanced voice, video, and data applications over the WAN and supports key Cisco IOS Software features and services such as quality of service (QoS), Network-Based Application Recognition (NBAR), IP Security (IPsec), Firewall, intrusion detection system (IDS), Network Address Translation (NAT), and NetFlow. Table 1 gives performance recommendations for positioning of the module in the branch office (Figure 2).

    Table 1.Cisco T3/E3 Service Module Branch-Office Positioning and Platform Support Matrix

    Supported Platform

    Recommended Type of Service

    Maximum Number of T3/E3 Modules Supported

    Minimum Cisco IOS Software Version (IP Base Feature Set or Later)

    Cisco 2911, 2921, and 2951

    Full-rate T3/E3 with concurrent services

    1

    15.2(4)M4, 15.3(1)T2, 15.3(2)T1

    Cisco 3925 and 3925E

    Full-rate T3/E3 with concurrent services

    2

    15.2(4)M4, 15.3(1)T2, 15.3(2)T1

    Cisco 3945 and 3945E

    Full-rate T3/E3 with concurrent services

    2

    15.2(4)M4, 15.3(1)T2, 15.3(2)T1

    Cisco 4451-X

    Full-rate T3/E3 with concurrent services

    2

    IOS-XE3.9

    Figure 2. Typical Cisco T3/E3 Service Module Deployments

    Specifications

    Table 2 lists the product number and description, and Table 3 lists the LED port indicators and status for the Cisco T3/E3 Service Module.

    Table 2.Product Name and Description

    Product Number

    Description

    SM-X-1T3/E3

    One-port clear-channel T3/E3 Service Module

    Hardware Specifications

    DS-3/E3 Specifications

    DSX-3 level interface with dual female 75-ohm BNC coaxial connectors per port (separate RX and TX)

    Full-duplex connectivity at DS-3 rate (44.736 MHz)

    Full-duplex connectivity at E3 rate (34.368 MHz)

    Scrambling and subrate support of major DSU vendors

    Line build-out programmable for up to 450 feet of 734A or equivalent coaxial cable or up to 225 feet for 728A or equivalent coaxial cable

    C-bit or M23 framing for T3; bypass and G.751 framing for E3 (software selectable)

    Binary three-zero substitution (B3ZS) (T3) or high-density bipolar with three zeros (HDB3) (E3) line coding

    Support for 16- and 32-bit CRC (16-bit default)

    DS-3 FEAC channel support

    Twenty-four-hour history maintained for error statistics and failure counts

    DS-3 alarm and event detection (once-per-second polling)

    AIS

    OOF

    Line code violation (LCV)

    Excessive zeros (EXZ)

    Far-end receive failure (FERF)

    Table 3.LED Port Indicators and Status

    LED Indicator

    Color

    Active State Description

    CD

    Green

    Loopback mode is on.

    LP

    Yellow

    Port is receiving AIS.

    AIS

    Yellow

    Port is receiving FERF signal.

    FERF

    Yellow

    Service module is enabled.

    EN

    Yellow

    Port is receiving OOF errors.

    Alarm

    Yellow

    Loopback mode is on.

    Serial Encapsulations

    HDLC

    PPP

    Frame Relay

    Physical Specifications

    Single-wide service module, no slot restrictions

    Dimensions (H x W x D) 1.55 x 7.10 x 7.2 in. (3.9 x 18.0 x 18.3 cm)

    Environmental Specifications

    Operating temperature: 32 to 104°F (0 to 40°C)

    Storage temperature: -4 to 149°F (-20 to 65°C)

    Relative humidity: 10 to 90%, noncondensing

    Certification Compliance

    DS-3 Physical Layer

    ANSI T1.102 and T1.107

    E3 Physical Layer

    TBR24

    ITU-T G.703 andG.823

    ACA TS016

    Safety

    United States (UL1950 3rd Edition/CSA C22.2, No.950)

    Canada (C1950)

    UK (BS6301, EN60950, EN41003)

    Germany (TUV GS)

    France (EN60950, EN41003, NFC98020)

    AS/NZS 3260 (Australia/New Zealand)

    EN60950/EN41003 (Europe)

    IEC 950 (national deviations)

    EMC

    47 CFR 15: 2001 Class A (FCC)

    ICES003 Class A

    EN55022 Class A: 1998

    EN300386: 2001

    EN55024:1998, EN50082-1:1997 and EN61000-6-2: 1999 including:

    -ESD: EN61000-4-2

    -Radiated Immunity: EN61000-4-3

    -Burst Transients: EN61000-4-4

    -Surges: EN61000-4-5

    -Injected RF: EN61000-4-6

    -Dips + Sags: EN61000-4-11

    EN61000-3-2: 1995

    EN61000-3-3: 1995

    AS/NZS 3548 Class A

    VCCI V-3/2000.04 Class A

    Standards

    T3/E3 MIB (RFC 1407)

    Additional Information

    SKU SM-X-1T3/E3-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/data_sheet_c78-728546.html
    Condition Refresh
    Module Type Router Module

    SM-X-1T3/E3-RF

    AED

    AED 0

    0