Double click on above image to view full picture

Zoom Out
Zoom In



Cisco Refurbished
Original Part No : SPA-1X10GE-WL-V2=

Cisco 1port 10GE LAN/WAN-PHY Shared pt Adaptr REMANUFACTURED

Availability: In stock

Available Quantity: 59000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco ® I-Flex approach combines shared port adapters (SPAs) and SPA interface processors (SIPs), providing an extensible design that facilitates service prioritization for data, voice, and video services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The Cisco I-Flex design maximizes connectivity options and offers superior service intelligence through programmable interface processors that deliver line-rate performance. Cisco I-Flex enhances speed-to-service revenue and provides a rich set of quality-of-service (QoS) features for premium service delivery while effectively reducing the overall cost of ownership. This data sheet contains the specifications for the Cisco 1-Port 10-Gigabit Ethernet LAN/WAN-PHY Shared Port Adapter.

    Figure 1. Cisco 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA

    Product Overview

    The Cisco 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues Cisco's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.
    Within a central office or data center or in a metropolitan-area network (MAN), 10-Gigabit Ethernet interfaces are commonly used to interconnect routers or other devices. The Cisco 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA supports a broad range of customer needs and applications. With this SPA, users can mix and match SPA ports with other types of interfaces in the same slot. The Cisco 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA introduces 10-Gigabit Ethernet connectivity based on IEEE 802.3ae standards for compatibility and interoperability in configurable WAN and LAN modes, with a single-height modular I/O form factor.


    The Cisco 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA can be used in any combination of the following applications:

    • Residential triple play

    • Metro Ethernet services

    • Converged residential and business services

    • Internet peering

    • Inter- and intra-point of presence (POP) aggregation

    • WAN, SONET/SDH, dense wavelength division multiplexer (DWDM), and add/drop multiplexer (ADM) connectivity (WAN PHY mode)

    Key Features and Benefits

    The Cisco SPA/SIP portfolio offers many advantages, including the following:

    • Modular, flexible, intelligent interface processors

    – Flexible design allows mixing and matching of interface types on the same interface processor for consistent services, independent of access technology.

    – Programmable interface processors provide flexibility for the service diversity required in next-generation networks.

    – Innovative design provides intelligent delivery of services without compromising performance.

    • Increased speed-to-service revenue

    – The programmable Cisco architecture extended to 10 Gbps dramatically improves customer density, increasing potential revenue per platform and facilitating compatibility with future versions.

    – Interface breadth (copper, channelized, POS, ATM, and Ethernet) on a modular interface processor allows service providers to quickly roll out new services, facilitating consistent, secure services for all customers, large and small.

    – XFP interfaces are featured for high-port-count applications with reach flexibility. Future optical technology improvements can be adopted using existing SPAs.

    • Dramatically improved return on your routing purchase

    – Improved slot economics and increased density reduce capital expenditures (CapEx).

    – The ability to easily add new interfaces as they are needed facilitates a "pay-as-you-grow" business model while still offering a high-density solution.

    – SPAs are shared across multiple platforms and can be easily moved from one to another, providing consistent feature support, accelerated product delivery, and a significant reduction in operating expenses (OpEx) through common sparing as service needs change.

    Product Specifications

    Tables 1 and 2 provide specifications of the Cisco 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA.

    Table 1. Product Specifications





    Product compatibility

    • Cisco 12000 Series Routers
    • Cisco ASR 1000 Series Router
    • Cisco CRS Carrier Routing System

    Port density per SPA

    One 10-Gigabit Ethernet (GE) port

    Physical interface

    10-Gbps XFP optics

    Physical connectivity


    * Refer to Tables 3 and 4 for details

    LED indicators

    SPA status: Bicolor green and amber LEDs encode the SPA status as follows:

    • LED off: SPA is powered off
    • LED amber: SPA is powered on and initializing
    • LED green: SPA is powered on and operational

    In addition to the status LED, the SPA also has a bicolor LED dedicated to each port to indicate port status. The green and amber LEDs encode the port status as follows:

    • LED off: Port is not activated by software
    • LED amber: Port is activated by software, but there is a problem with the Ethernet link
    • LED green: Port is activated by software, and there is a valid Ethernet link

    Features and functions

    • 10 GE configurable LAN/WAN-PHY
    • SONET/SDH rate compatibility (detailed comparisons and feature summaries in Tables 3 and 4)
    • Full-duplex operation
    • 802.1Q VLAN termination
    • 802.1ad QinQ termination (stacked VLAN processing)
    • Jumbo frames support (9188 bytes)
    • Support for command-line interface (CLI)-controlled online insertion and removal (OIR)
    • 802.3x flow control
    • Bridge protocol data unit (BPDU), Cisco Discovery Protocol, and VLAN Trunking Protocol (VTP) filtering
    • Layer 2 Protocol (BPDU, Cisco Discovery Protocol, and VTP) tunneling
    • Layer 2 access list (MAC address-based filtering)
    • Up to 8000 VLANs per SPA and subject to a limit of 4000 VLANs per port for 802.1q
    • Up to 5000 MAC accounting entries per SPA (source MAC accounting on the ingress, and destination MAC accounting on the egress)
    • Up to 2000 MAC address entries for destination MAC address filtering per SPA, and up to 1000 MAC address filtering entries per port
    • Per-port byte and packet counters for policy drops; oversubscription drops; cyclic-redundancy-check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets
    • Per-VLAN byte and packet counters for policy drops; oversubscription drops; and unicast, multicast, and broadcast packets
    • Per-port byte counters for good bytes and dropped bytes

    Other software features supported:

    • Ethernet over Multiprotocol Label Switching (EoMPLS)
    • QoS
    • Hot Standby Router Protocol (HSRP)
    • Virtual Router Redundancy Protocol (VRRP)

    Reliability and availability

    OIR of the SPA within the SIP and the optics within the SPA

    Network management

    Network management:

    • Field-replaceable XFP modules
    • Host-system CLI
    • Simple Network Management Protocol (SNMP)

    Inventory- and asset management-related MIBs:

    • Entity-MIB (RFC 2737)
    • Cisco-entity-asset-MIB

    Fault management:

    • Cisco-entity-field-replaceable unit (FRU)-control-MIB
    • Cisco-entity-alarm-MIB
    • Cisco-entity-sensor-MIB

    Physical interface management:

    • IF-MIB
    • Ether like-MIB (RFC 2665)

    Other MIBs:

    • Remote Monitoring (RMON)-MIB (RFC 1757)
    • Cisco-class-based-QoS-MIB
    • MPLS-related MIBs
    • Ethernet MIB/RMON

    Physical specifications

    • Weight: 0.75 lb (0.34 kg)
    • Height: 0.8 in. (2.03 cm) (single height)
    • Width: 6.75 in. (17.15 cm)
    • Depth: 7.28 in. (18.49 cm)


    20 W

    Environmental specifications

    • Storage temperature: -38 to 150°F (-40 to 70°C)
    • Operating temperature, nominal: 32 to 104°F (0 to 40°C)
    • Operating temperature, short term: 32 to 131°F (0 to 55°C)
    • Storage relative humidity: 5 to 95% relative humidity
    • Operating humidity, nominal: 5 to 85% relative humidity
    • Operating humidity, short term: 5 to 90% relative humidity
    • Operating altitude: -60 to 4000 meters

    Compliance and agency approvals


    • UL 60950-1
    • CSA C22 No. 60950-1
    • EN 60950-1
    • IEC 60950-1
    • AS/NZS 60950
    • EN 60825-1
    • EN 60825-2
    • 21 CRF 1040


    • CFR 47, FCC Part 15-Class A
    • ICES 003-Class A
    • CISPR 22 Class A
    • EN 55022 Class A
    • EN 300386 Class A
    • AS/NZS Class A
    • VCCI-Class B
    • EN 50082-1
    • EN 55024
    • IEC/EN61000-4-2 Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
    • IEC/EN61000-4-3 Radiated Immunity (10 V/m)
    • IEC/EN61000-4-4 Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
    • IEC/EN61000-4-5 Surge AC Port (4-kV CM, 2-kV DM)
    • IEC/EN61000-4-5 Surge Signal Port (1-kV indoor, 2-kV outdoor)
    • IEC/EN61000-4-5 Surge DC Port (1 kV)
    • IEC/EN61000-4-6 Immunity to Conducted Disturbances (10 Vrms)
    • IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity (30 A/m)
    • IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations


    • IEEE 802.3ae (10 Gigabit Ethernet interface SPA)

    Industry Standards

    The Cisco 1-Port 10-GE LAN/WAN-PHY SPA is designed to meet the following requirements (some qualifications are currently in progress):

    • SR-3580-Network Equipment Building Standards (NEBS): Criteria levels (Level 3 compliant)
    • GR-63-CORE-NEBS: Physical protection
    • GR-1089-CORE-NEBS EMC and safety


    Table 2. Optical Specifications: Modular



    Gigabit Ethernet XFP Optics

    Maximum Distance

    10 GE long-reach (LR) optics (single-mode fiber)

    6.2 miles (10 km)

    10 GE extended-reach (ER) optics (single-mode fiber)

    25 miles (40 km)

    10 GE long-haul (ZR) optics (single-mode fiber)

    50 miles (80 km)


    Table 3. SONET/SDH Feature Support on 10 Gigabit Ethernet WAN Interface



    SONET/SDH Features and Functions

    Ethernet WAN Interface


    Jitter Compliance

    Not supported

    Ethernet WAN interface cannot be used in SONET/SDH rings

    Synchronization (Loop Timing Mode, High Accuracy PRS)

    Not supported

    Ethernet WAN interface cannot be used in SONET/SDH rings

    Automatic Protection Switching

    Not supported

    Equivalent link redundancy functionality in Ethernet is 802.1ad link (LAG)

    Section and Line DCC (Data Channel Communication)

    Not supported

    These user communication channels cannot be used in Ethernet

    Section, Line, Path Order wire (64 kbps channel)

    Not supported


    Section, Line, Path Growth

    Not supported


    Virtual Tributary (VT)

    Not supported

    Only single Ethernet channel is supported (VLANs are supported)




    Section, Line, and Path BIP8


    Errors are detected and counted

    Section and Path Trace


    16-byte messages (16 hardware registers to send and receive trace messages); automatic trace mismatch is not supported

    Pointer operation/action


    H1, H2 are used to get the location of SPE

    Defects or anomalies - Unequipped payload (UNEQ-P), Path trace identifier mismatch (TIM-P), all Virtual tributary (VT) -related defects or anomalies

    Not supported


    Defects or anomalies - LOS, SEF, LOF, S-BIP, L-BIP, AIS-L, RDI-L, AIS-P, LOP-P, P-BIP, PLM-P


    Counters for section, line, and path BIP errors


    Table 4. Feature and Application Comparison Between 10 Gigabit Ethernet Interfaces




    10 GE LAN Mode

    10 GE WAN Mode


    Maximum data rate

    10 Gbps

    9.2946 Gbps

    9.584646 Gbps

    Fault Detection and Diagnostics

    Link availability

    Link detect (up/down)

    Loss of signal, signal fail

    Loss of signal, signal fail

    Link quality or faulty TX/RX

    Encoding error, runt, jabber, CRC

    Both GE LAN and SONET capabilities

    B1, B2, B3, far end block error (FEBE)/remote error indication (REI)

    Remote alarm/defect

    Remote fault/ local fault and keep alive

    Remote fault/local fault and alarm indication signal (AIS), remote defect indication (RDI)

    AIS, RDI

    Summary (fault detection and diagnostics)

    10 GE WAN has same or more diagnostics capability as SONET; 10 GE LAN has less diagnostics capabilities

    Fault protection/ redundancy

    Done by link aggregation (802.1 ad)

    Done by link aggregation (802.1 ad)

    Automatic protections switching (APS) (linear)

    Channel multiplexing (multiple low-speed channels)

    Via VLAN best effort traffic (requires policer, shaper for QoS)

    Via VLAN best effort traffic (requires policer, shaper for QoS)

    TDM multiplexing with guaranteed bandwidth


    Back-to-back connection over dark fiber




    DWDM with SONET interface


    Yes (may get relatively higher pointer adjustments)


    DWDM with 10 GE LAN interface




    Direct connection to ADM


    Yes - conditional (could have relatively higher pointer adjustment, network management software should be able to handle these)


    Additional Information

    Weight (Kg) 1
    Datasheet URL
    Condition Refresh
    Module Type Shared Port Adapter



    AED 0