Double click on above image to view full picture

Zoom Out
Zoom In



Cisco Refurbished
Original Part No : SPA-4XOC48POS/RPR=

4pt OC48/STM16 POS/RPR Shared Port Adapters REMANUFACTURED

Availability: In stock

Available Quantity: 152000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® Interface Flexibility (I-Flex) design combines shared port adapters (SPAs) and SPA interface processors (SIPs) to help enable service prioritization for voice, video, and data services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The extensible Cisco I-Flex design maximizes connectivity options and offers superior service intelligence through programmable interface processors that deliver line-rate performance. Cisco I-Flex enhances speed-to-service revenue and provides a rich set of quality of service (QoS) features for premium service delivery while effectively reducing the overall cost of ownership. This data sheet contains the specifications for the Cisco 1-, 2-, and 4-Port OC-48c/STM-16c Packet over SONET/SDH (POS) and Resilient Packet Ring (RPR) Shared Port Adapter (Cisco 1-, 2-, and 4-Port OC-48c/STM-16c POS/RPR SPA; refer to Figure 1).

    Product Overview

    Figure 1. Cisco 2-Port OC-48c/STM-16c POS/RPR SPA with SFP Optics

    The Cisco 1-, 2-, and 4-Port OC-48c/STM-16c POS/RPR SPAs are available on high-end Cisco routing platforms and offers the benefits of network scalability with lower initial costs and easy upgrades. The SPAs continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and leading-edge technology. The SPAs allow different interfaces (POS, ATM, etc.) to be deployed on the same carrier card.
    The Cisco 1-, 2-, and 4-Port OC-48c/STM-16c POS/RPR SPAs use Small Form-Factor Pluggable (SFP) interfaces. SFP modules are available in short-reach (2 km), intermediate-reach (15 km), and long-reach (80 km) optics.


    The Cisco 1-, 2-, and 4-Port OC-48c/STM-16c POS and RPR SPAs can be used in multiple applications, including:

    • Access and aggregation

    • WAN uplinks

    • Internet peering

    These SPAs feature both packet over SONET/SDH for mesh fiber networks (Figure 2) and Resilient Packet Ring for ring fiber topologies (Figure 3). These SPAs comply with the IEEE 802.17 RPR standard and also support the Spatial Reuse Protocol (SRP) for compatibility with existing Dynamic Packet Transport/Resilient Packet Ring (DPT/RPR) networks.

    Figure 2. POS Applications

    Figure 3. RPR Applications

    Key Features and Benefits

    The Cisco SPA/SIP portfolio offers many advantages, including:

    • Industry-leading modular, flexible, intelligent interface processors

    – Unmatched flexibility, allowing a combination of interface types on the same interface processor for consistent services, independent of access technology.

    – Pioneering programmable interface processors that provide flexibility for the service diversity required in next-generation networks.

    – Innovative design that provides intelligent delivery of services without compromising on performance.

    • Increased speed-to-service revenue

    – The scalable, programmable Cisco architecture extended to 2.5 Gbps dramatically improves customer density, increasing potential revenue per platform.

    – Interface breadth (copper, channelized, POS, ATM, and Ethernet) on a modular interface processor allows service providers to more quickly roll out new services, ensuring all customers, large and small, receive consistent, secure, and guaranteed services.

    – High-density SFP interfaces are featured for high-port-count applications with reach flexibility. Future optical technology improvements can be adopted using existing SPAs.

    • Significant investment protection

    – Improved slot economics and increased density reduce capital expenditures (CapEx).

    – The ability to easily add new interfaces as they are needed facilitates a "pay-as-you-grow" business model while still offering a high-density solution.

    – SPAs are shared across multiple platforms, and can be easily moved from one to another, providing consistent feature support, accelerated product delivery, and a significant reduction in operating expenses (OpEx) through common sparing as service needs change.

    Product Specifications

    Table 1 lists product specifications for the Cisco 1-, 2-, and 4-Port OC-48c/STM-16c POS/RPR SPA and Table 2 lists optical specifications.

    Table 1. Product Specifications





    Product Compatibility

    Cisco Catalyst 6500 Series Switches

    Cisco 7600 Series Routers

    Cisco 12000 Series Routers

    Cisco XR 12000 Series Routers

    Cisco ASR 1000 Series Router

    Cisco ASR 9000 Series Router(2 port only)

    Cisco CRS Carrier Routing System(2 and 4 port only)

    Port Density per SPA

    1, 2, and 4 ports

    Physical Interface

    OC-48c/STM-16c SFP optics module (see optical parameters below)

    Visual status indicators (LEDs)

    • SPA status LED
    • Per port LEDs
    • Carrier/Alarm
    • Active/Loopback
    • Protect (DPT/RPR mode)
    • Pass Through (DPT/RPR mode)

    Protocols (see table below for RPR/SRP support info)

    High-Level Data Link Control (HDLC), RFC 2615

    Point-to-Point Protocol (PPP), RFC 1662

    Frame Relay, RFC 2427


    IEEE 802.17 - Resilient Packet Ring (RPR)

    IETF 2892 - Spatial Reuse Protocol (SRP)

    Features and Functions


    • Local (internal) or loop timed (recovered from network)
    • Stratum 3 clock accuracy (± 4.6 ppm) over full operating temperature
    • Pointer activity monitoring

    Local (diagnostic) and line (network) loopback

    Section DCC (SDCC) - Platform-dependent feature

    Payload mapping

    • 1 + X^43 self-synchronous scrambler

    SONET/SDH compliance

    • Telecordia (Bellcore) GR-253-CORE (as applicable)
    • ANSI T1.105, T1.231
    • ITU-T G.707, G.957, G.825 (as applicable)

    Supported SONET/SDH alarm and signal events

    • Signal Failure Bit Error Rate (SF-BER)
    • Signal Degrade Bit Error Rate (SD-BER)
    • Signal Label Payload Construction (C2)
    • Path Trace Byte (J1)
    • Section
    • Loss of Signal (LOS)
    • Loss of Frame (LOF)
    • Error Counts for B1
    • Threshold Crossing Alarms (TCA) for B1
    • Line
    • Line Alarm Indication Signal (LAIS)
    • Line Remote Defect Indication (LRDI)
    • Line Remote Error Indication (LREI)
    • Error Counts for B2
    • Threshold Crossing Alarms (TCA) for B2
    • Path
    • Path Alarm Indication Signal (PAIS)
    • Path Remote Defect Indication (PRDI)
    • Path Remote Error Indication (PREI)
    • Error Counts for B3
    • Threshold Crossing Alarms (TCA) for B3
    • Loss of Pointer (LOP)
    • Positive Stuffing Event (PSE)
    • Negative Stuffing Event (NSE)
    • Path Unequipped Indication Signal (PUNEQ)
    • Path Payload Mismatch Indication Signal (PPLM)

    Network Management

    RFC 2558 MIB (SONET/SDH)

    Simple Network Management Protocol (SNMP)

    Reliability and Availability

    Online insertion and removal (OIR)

    Field-replaceable SFP optical modules

    1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols

    Single SPA software reset

    Physical Specifications

    Weight: 0.75 lbs (0.34 kg)

    Height: 0.8 inches (2.03 cm)

    Width: 6.75 inches (17.15 cm)

    Depth: 7.28 inches (18.49 cm)


    18 Watts maximum (4-port)

    15.5 Watts maximum (1-, 2-, and 4-Port)

    12 Watts maximum (1-port)

    Environmental Specifications

    Operating temperature: 41° to 104°F (5° to 40°C)

    Storage temperature: -38° to 150°F (-40° to 70°C)

    Operating humidity: 5 to 85% relative humidity

    Storage humidity: 5 to 95% relative humidity

    Compliance and Agency Approvals


    UL 60950

    CSA 22.2-No.60950


    IEC 60950 CB Scheme

    ACA TS001

    AS/NZS 3260

    EN60825\IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1

    21CFR1040 -FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1


    FCC Part 15 (CFR 47)

    ICES 003


    CISPR 22

    AS/NZ 3548







    Network Equipment Building System (NEBS)

    This product is designed to meet the following requirements (official qualification may be in progress):

    SR-3580 - NEBS: criteria levels (Level 3 compliant)

    GR-63-Core - NEBS: physical protection

    GR-1089-Core - NEBS: EMC and safety

    European Telecommunications Standard Institute (ETSI)

    EN300 386/EN300 386-2 Class B

    ETS 300 019 Storage Class 1.1

    ETS 300 019 Transportation Class 2.3

    ETS 300 019 Stationary Use Class 3.1


    Table 2. Protocol Mode Availability



    SPA Variant


    Cisco 12000

    Cisco XR12000

    Cisco CRS

    Cisco 7600




    SPA not yet supported

    SPA not yet supported






















    Not supported




    SPA not yet supported

    SPA not yet supported







    Not supported



    Note: The OC48 SPAs support tri-mode operation as POS, DPT or 802.17 RPR protocol interfaces. POS mode is provided by all platforms on which the SPA is supported. Additional software support is needed to enable operation in DPT or 802.17 RPR modes. The table above shows the earliest release of support for each SPA on the platform and does not show detail with respect to the SIPs on which the SPA is supported. This datasheet will be updated as support is added, but customers are encouraged to check with their Cisco Representative to get the most up-to-date information on SIP/SPA compatibility.

    Table 3. Optical Specifications: Small Form-Factor Pluggable



    OC-48c/STM-16c Transceiver Type

    Transmit Power

    Maximum Power to Receiver, dBm

    Receiver Sensitivity, dBm

    Power Budget, dB

    Receiver Operating Wavelength

    Nominal Distance Between Stations

    Single-mode short-reach (SR)

    -10 dBm min. to -3 dBm max, at 1310 nm




    1290 to 1565 nm

    Up to 1.2 miles (2 km)

    Single-mode intermediate-reach (IR-1)

    -5 dBm min. to 0 dBm max. at 1310 nm




    1290 to 1565 nm

    Up to 9 miles (15 km)

    Single-mode long-reach (LR-2)

    -2 dBm min. to 3 dBm max. at 1550 nm




    1290 to 1565 nm

    Up to 50 miles (80 km)


    Ordering Information

    To place an order, visit the Cisco Ordering Home Page. Table 3 lists ordering information for the Cisco 1-, 2-, and 4-Port OC-48c/STM-16c POS/RPR SPA.

    Table 4. Ordering Information



    Product Description

    Part Number

    1 port OC48c/STM-16c POS/RPR Shared Port Adapter


    1-, 2-, and 4-Port OC-48c/STM-16c POS/RPR Shared Port Adapter


    4 port OC48c/STM-16c POS/RPR Shared Port Adapter


    Single-Mode, Short-Reach (SR) SFP Module


    Single-Mode, Intermediate-Reach (IR) SFP Module


    Single-Mode, Long-Reach (LR-2) SFP Module


    Additional Information

    Weight (Kg) 1
    Datasheet URL
    Condition Refresh
    Module Type Shared Port Adapter



    AED 0