Double click on above image to view full picture

Zoom Out
Zoom In



Cisco Refurbished
Original Part No : VIC2-2BRI-NT/TE=

2pt Voice Interface Card - BRI (NT and TE) REMANUFACTURED

Availability: In stock

Available Quantity: 1248

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details


    ISDN Voice Interface Cards (VICs) such as VIC-2BRI-S/T-TE connect directly to Public Switched Telephone Networks (PSTNs), Private Branch Exchanges (PBX), and Private Access Branch Exchanges (PABX), supporting both on-premise and off-premise connections.




    There are no specific requirements for this document.

    Components Used

    The document discusses the following ISDN BRI VICs:

    • VIC-2BRI-S/T-TE

    • VIC-2BRI-NT/TE

    • VIC2-2BRI-NT/TE


    For more information on document conventions, refer to the Cisco Technical Tips Conventions.

    Product Numbers

    Product NumberDescription
    VIC-2BRI-S/T-TE Two-port ISDN BRI VIC, S/T interface, Terminal Equipment (TE)
    VIC-2BRI-NT/TE Two-port ISDN BRI VIC, S/T interface, Network Termination (NT) or TE
    VIC2-2BRI-NT/TE Two-port ISDN BRI VIC, S/T interface, NT or TE


    This table lists the features that are supported on ISDN BRI VICs:

    Voice Ports Two ISDN BRI, total of four B channels, therefore four voice calls per VIC.
    ISDN Interface ISDN BRI S/T RJ-45
    Connections VIC-2BRI-S/T-TE—Provides TE ISDN interface. Connects to the telco central office switch or a PBX that provides NT. You cannot connect ISDN phones or faxes to this VIC (it would require NT implementation). VIC-2BRI-NT/TE—Provides TE or NT. VIC2-2BRI-NT/TE—Provides TE or NT. Connects as network side or user side to PBX or key system as off-premises connections (ISDN voice BRI). Supports patent-pending flexible Layer 2 (L2) and Layer 3 (L3) configurations.
    ISDN Switch Types Supports all Cisco IOS® Software ISDN BRI switch types.

    The VIC2-2BRI-NT/TE cards are new generation VICs that are a hardware refresh of the older cards of the similar functionality, with resolved manufacture component issues. New functionality is also introduced on these BRI cards (which reduces the number of Stock Keeping Units (SKUs) required).

    The VIC2-2BRI-NT/TE is supported on NM-HD-1V, NM-HD-2V, and NM-HD-2VE, where as the VIC-2BRI-S/T-TE and VIC-2BRI-NT/TE are currently supported on NM-1V/2V.

    Additional Information

    Weight (Kg) 1
    Datasheet URL
    Condition Refresh
    Module Type Voice Interface Card



    AED 0