WIC-2AM-V2-RF

Double click on above image to view full picture

Zoom Out
Zoom In

WIC-2AM-V2-RF

Description:

Cisco Refurbished
Original Part No : WIC-2AM-V2=

Two-port Analog Modem Interface Card REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 1100

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    One- and two-port analog modem WAN interface cards (WICs; part numbers WIC-1AM-V2 and WIC-2AM-V2) are now available for the award-winning Cisco® 1800, 2600XM, 2691, 2800, 3700, and 3800 Series modular router platforms. The new version of these cards expands the already extensive range of WICs currently available for these routers (Figure 1). The interface cards provide cost-effective basic telephone service connectivity to allow remote router management, asynchronous dial-on-demand routing (DDR) and dial backup, dial- and fax-out modem access, and low-density remote-access-server (RAS) services. Combined with the differentiated services delivered through Cisco IOS® Software, the Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800 Series routers offer customers
    best-of-breed scalability, flexibility, and investment protection-all in cost-effective, multifunctional platforms.

    Figure 1. One- and Two-Port Analog Modem WICs for Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800 Series Platforms

    Both cards feature dual RJ-11 connectors, which are used for basic telephone service connection. The 2-port card uses one port for connection to a standard telephone line and the other port for connection to a basic analog telephone for use when the modem is idle.

    KEY BENEFITS

    Combined with the Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800, the cards provide:

    • An integrated solution for ease of deployment and management

    • Enhanced remote management capabilities

    • A cost-effective alternative to leased lines or ISDN

    • On-demand dial backup for critical WAN links

    KEY FEATURES

    Equipped with the new integrated analog modem WICs, the Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800 offer the most flexible, scalable, and manageable telephone dial access solution available on the market today.

    • Internal analog modem dialup capability-Internal modems allow simple setup of a remote router. There is no separate external power and no cables, and everything is in one chassis.

    • Support for speeds up to 56K (V.92 specification)-When dialing out to a digital endpoint, this feature allows users to achieve maximum data transfer rates, equating to faster file transfers, speedier Web access, and faster e-mail downloads.

    • Cisco IOS Dial Access Software-Cisco IOS Software provides a broad range of features for remote router management and dial backup, including:

    – Reverse Telnet support for LAN-based dial- and fax-out

    – Point-to-Point Protocol (PPP), Multilink PPP (MLPPP), and Serial Line Internet Protocol (SLIP)

    – TACACS+, RADIUS, and PPP password security

    – Autosensing Internetwork Packet Exchange (IPX), Transmission Control Protocol/IP (TCP/IP), AppleTalk Remote Access (ARA), and AppleTalk Control Protocol (ATCP)

    APPLICATIONS

    Remote Router Management

    Figure 2. Remote Router Management

    The cards are ideal for dialup access for remote router configuration and management (Figure 2). Similar to connecting a modem to the router auxiliary port, the modem WICs allow out-of-band management through an internal device. Both WICs can receive calls at speeds as fast as 33.6 kbps, depending upon line conditions.

    Dial Backup and Asynchronous DDR

    Figure 3. Dial Backup and Asynchronous

    Constant WAN access is often a requirement for branch offices connecting to a corporate site or the Internet. Although DSL, Frame Relay, ISDN, and leased line are common choices for a primary WAN link, an alternate data path is sometimes needed. The WICs combined with the Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800 offer the ability to automatically dial a backup connection when the primary WAN link is unavailable. In addition, the modem WICs can also be used to provide supplemental bandwidth when the primary WAN link is overused. Multiple modem calls can be aggregated using MLPPP when one 56K connection is insufficient.
    For some customers, dialup telephone service connectivity may be the only available choice for WAN access to the Internet or to a corporate home office. For those situations and for those installations that require only a dialup connection, the Cisco routers with the integrated modem WIC offer WAN connectivity through asynchronous DDR. As in the case of dial backup, MLPPP can be used to aggregate multiple dialup connections into one data stream, providing higher throughput.

    Dial- and Fax-Out Modem Access

    Figure 4. Dial- and Fax-Out Modem Access

    The modem WICs comply with RFC 2217 and provide dial- and fax-out modem functions to LAN-connected devices (Figure 4). Using the recommended "Advanced COM Port Redirection" software (available from http://www.tacticalsoftware.com), customers can take advantage of the modem WICs as if they were connected directly to their PC communications port, allowing convenient access to services such as America Online, CompuServe, and remote fax machines without requiring dedicated phone lines and modems at each PC.

    Note: The WICs do not have the ability to receive faxes; only fax-out is supported.

    Low-Density Analog RAS Access

    Figure 5. Low-Density Analog RAS Access

    Dial-in users can take advantage of the ability of the router to function as a small RAS, thus allowing dialup access to the LAN (Figure 5). Typically, a 2-port modem WIC would be used here for maximum port density, but the 1-port WIC is also acceptable. Scalability to multiple modem WICs per chassis (up to 12 in a Cisco 3845-refer to Table 3) is also possible. Dial-in speeds of up to 33.6 kbps (V.34bis) are possible. MLPPP is available to bond two or more calls together, thereby allowing higher-speed RAS support.

    FEATURE SUMMARY

    A summary of the features and benefits of the integrated modem WICs is provided in Table 1.

    Table 1. Integrated V.92 and V.44 Modem WICs Features and Benefits Summary

     

     

    Feature

    Benefit

    Auxiliary port compatibility

    • Eases deployment and saves space because of its integrated solution
    • Provides convenience by replicating all functions of an external modem connected to an auxiliary port

    V.92 (up to 56K) and V.44 modem specification support when dialing out to a digital endpoint

    Achieves maximum data transfer rates though V.92 or V.44, equating to faster file transfers, speedier Web access, and faster e-mail downloads

    Fax-out capability at speeds up to 14.4 kbps

    Allows customers to access fax machines and servers from their LAN-connected PCs

    MLPPP

    Increases connection speeds across modems in the same WIC and across other modem WICs in the same chassis

    Full platform support

    Modem WIC supported on Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800 routers

    Retrofits into existing chassis

    Fits into a WIC slot on a Cisco 2600XM, 2691, or 3700 chassis or any compatible network module on a Cisco 2600XM, 2691, or 3700 router (refer to Table 3 for details)

    Cisco IOS Software support

    Does not require additional memory to support the modem WICs

    Up to 24 modems per chassis

    No restriction on number of modems available (other than slot availability; refer to Table 3 for details)

    Major modem vendor compatibility

    Works with AT&T, Hayes, Motorola, Microcom, Multitech, and USR modems (compatibility with other modem vendors is expected, but not confirmed)

    Fax vendor compatibility

    Works with Panasonic fax machines (compatibility with other fax vendors is expected, but not confirmed)

    Current analog and digital modem network module compatibility

    Integrates transparently with current analog (NM-8AM-V2 and NM-16AM-V2) and digital modems (NM-xDM)

    Worldwide support for country-specific standards

    Supports various regulatory requirements; for the latest per-country approval information for the modem WICs, contact your local Cisco Systems® representative

    Leased-line mode

    Does not support leased-line mode

    Modem firmware upgrade capability

    Support modem firmware upgrades

     

    NETWORK MANAGEMENT SUPPORT

    One- and two-port analog modem WICs work with the following configuration and network management methods:

    • CiscoWorks

    • Telnet and console port command-line interface (CLI) configuration

    MEMORY AND SOFTWARE REQUIREMENTS

    Table 2. Memory and Software Requirements

     

     

    Minimum Cisco IOS Software Support

    Cisco 1800 Series Integrated Services Routers

    Cisco 2600XM Multiservice Router

    Cisco 2691 Multiservice Platform

    Cisco 2800 Series Integrated Services Routers

    Cisco 3700 Series Multiservice Access Routers

    Cisco 3800 Series Integrated Services Routers

    WIC-1AM-V2, WIC-2AM-V2

    12.4(3), 12.4(4)T

    12.3.(16), 12.3(14)T,
    12.4(3), 12.4(4)T

    12.3(16), 12.3(14)T,
    12.4(3), 12.4(4)T

    12.4(3), 12.4(4)T

    12.3(16), 12.3(14)T,
    12.4(3), 12.4(4)T

    12.4(3), 12.4(4)T

     

    Note: No additional memory is required to support the modem WICs (refer to the Cisco IOS Software release notes for platform memory requirements per feature set).

    MAXIMUM MODEM WAN INTERFACE CARDS PER CHASSIS

    Table 3. Maximum Modem WICs per Chassis without Network Module

     

     

    Platform

    Maximum Modem WICs per Chassis

    Cisco 1800

    2

    Cisco 2600XM

    4

    Cisco 2691

    5

    Cisco 2800

    4 (Cisco 2801: only 3)

    Cisco 3725

    7

    Cisco 3745

    11

    Cisco 3825

    8

    Cisco 3845

    12

     

    Note: Refer to the platform documents for more details about other hardware restrictions. The Cisco 2600XM, 2600, 2800, 3700, and 3800 also support higher-density modem solutions in a network module form factor. Visit the following URLs for additional information about the 1- and 2-port WICs and the digital modem:

    • For the WICs (NM-8AM-V2 and NM-16AM-V2) (Cisco 2600XM, 2600, 2800, 3700, and 3800 Analog Modem Network Modules): http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/brisc_ds.pdf

    • For digital modem (NM-xDM) (Cisco 3700 and 3800 Series Digital Modem Network Modules):
    http://www.cisco.com/en/US/prod/collateral/routers/ps274/product_data_sheet09186a0080091b98.html

    MODEM SPECIFICATIONS

    Carrier Protocols

    • ITU V.92

    • ITU V.90

    • K56Flex

    • ITU V.23

    • Bell 103

    • ITU V.21

    • ITU V.22

    • Bell 212A

    • ITU V.22bis

    • ITU V.32

    • ITU V.32bis

    • V.34

    Error-Correcting Link Access Protocols

    V.42 Link Access Procedure for Modems (LAPM), MNP 2-4

    Compression Protocols

    V.44 and V.42bis (includes MNP-5)

    Fax Protocols

    • ITU-T V.27ter

    • ITU-T V.29

    • ITU-T V.17

    • Point-of-sale (POS) configuration support

    • FAX Class 2

    • TIA/EIA-592 Class 2.0 and TIA/EIA-592 draft SP- 2388 Class 2 Group III fax transmission, at ITU-T V.33, V.17, V.29, V.27ter, and V.21 modulations

    HARDWARE SPECIFICATIONS

    Hardware specifications of the integrated modem WICs are described in Table 4.

    Table 4. Specifications for the WICs

     

     

    Specification

    Data

    Hardware and platform compatibility

    Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800 models

    Dimensions (H x W x D)

    75 x 3.08 x 4.38 in. (1.91 x 6.93 x 9.86 cm)

    Weight

    2.4 oz (68 gram)

    Network module support

    • Cisco 2600XM: Through NM-2W
    • Cisco 2691: Through mixed modules (NM-2W, NM-1FE2W-V2, and NM-2FE2W-V2)
    • Cisco 3700: Through combo modules (NM-2W, NM-1FE2W-V2, and NM-2FE2W-V2)
    • Cisco 3800: Through combo modules (NM-2W, NM-1FE2W-V2, and NM-2FE2W-V2)

    Throughput

    Up to 56 kbps downstream and up to 33.6 kbps upstream, subject to line conditions

    Ports

    Two RJ-11 ports (second port on WIC [WIC-1AM] can be used to connect an analog telephone for use when the modem is idle)

    Cabling

    One or two RJ-11 connectors

    LEDs (per modem)

    SP (high-speed connectivity for V.92, V90, or K56Flex), CN (carrier detect), and OH (off-hook) status indicators

    Network Equipment Building Standards (NEBS) compliance

    Level 3, Types II and IV

     

    Refer to the Cisco 1800, 2600, 2800, 3700, and 3800 data sheets for additional information about mechanical, environmental, and agency certifications. Also visit the following URLs:

    • Cisco 1800: http://www.cisco.com/en/US/products/ps5853/products_data_sheets_list.html

    • Cisco 2600: http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd800fa5be.html

    • Cisco 2800: http://www.cisco.com/en/US/prod/collateral/routers/ps5854/ps5882/product_data_sheet0900aecd8016fa68.html

    • Cisco 3700: http://www.cisco.com/en/US/prod/collateral/routers/ps282/product_data_sheet09186a008009203f.html

    • Cisco 3800: http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html

    COUNTRY AVAILABILITY

    For the latest information regarding per-country approval for the WICs, contact your local Cisco representative.

    ORDERING INFORMATION

    Table 5. Part Numbers

     

     

    Part Number

    Description

    WIC-1AM-V2

    1-port analog modem WIC

    WIC-1AM-V2=

    1-port analog modem WIC

    WIC-2AM-V2

    2-port analog modem WIC

    WIC-2AM-V2=

    2-port analog modem WIC

     

    ENVIRONMENTAL OPERATING RANGES

    • Operating temperature: 32 to 104ºF (0 to 40ºC)

    • Nonoperating temperature: -4 to 149ºF (-20 to 65ºC)

    • Relative humidity: 10 to 85 percent noncondensing, operating; 5 to 95 percent noncondensing, nonoperating safety

    CISCO 1800, 2600, 2800, 3700, AND 3800 POWER

    • AC input voltage: 100 to 240 VAC

    • DC voltages (Cisco 2600, 3600, and 3700)

    • Frequency: 47 to 64 Hz

    Additional Information

    SKU WIC-2AM-V2-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/2600-series-multiservice-platforms/product_data_sheet09186a00801d66bc.html
    Condition Refresh
    Module Type WAN Interface Card

    WIC-2AM-V2-RF

    AED

    AED 0

    0