WS-C3850-12S-S-RF

Double click on above image to view full picture

Zoom Out
Zoom In

WS-C3850-12S-S-RF

Description:

Cisco Refurbished
Original Part No : WS-C3850-12S-S

Cisco Catalyst 3850 12 Port GE SFP IP Base REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 10200

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco®Catalyst® 3850 Series is the next generation of enterprise-class stackable Ethernet and Multigigabit Ethernet access and aggregation layer switches that provide full convergence between wired and wireless on a single platform. Cisco’s new Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization. This convergence is built on the resilience of the new and improved Cisco StackWise-480 technology. The Cisco Catalyst 3850 Series Switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power over Ethernet (Cisco UPOE), modular and field-replaceable network modules, RJ45 and fiber-based downlink interfaces, and redundant fans and power supplies. With speeds that reach 10Gbps, the Cisco Catalyst 3850 Multigigabit Ethernet Switches support current and next-generation wireless speeds and standards (including 802.11ac Wave 2) on existing cabling infrastructure.

    Product Overview

    ●   Integrated wireless controller capability with:

    ◦    Up to 40G of wireless capacity per switch (48-port RJ45 models)

    ◦    Support for up to 100 access points and 2000 wireless clients on each switching entity (switch or stack)

    ●   24 and 48 10/100/1000Mbps data PoE+ and Cisco UPOE models with energy-efficient Ethernet (EEE)

    ●   24 and 48 100Mbps/1/2.5/5/10 Gbps Cisco UPOE models with energy-efficient Ethernet (EEE)

    ●   12- and 24-port 1 Gigabit Ethernet SFP-based models

    ●   12- and 24-port 1/10 Gigabit Ethernet SFP+-based models

    ●   48-port 1/10 Gigabit Ethernet SFP+ model with 4 fixed 40 Gigabit Ethernet QSFP+ uplinks

    ●   Cisco StackWise-480 technology provides scalability and resiliency with 480 Gbps of stack throughput[1]

    ●   Cisco StackPower technology provides power stacking among stack members for power redundancy1

    ●   Five optional uplink modules[2] with 4 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet, 4 x 10 Gigabit Ethernet[3], 8 x 10 Gigabit Ethernet4, or 2 x 40 Gigabit Ethernet QSFP+[4] ports

    ●   Dual redundant, modular power supplies and three modular fans providing redundancy

    ●   Full IEEE 802.3at (PoE+) with 30W power on all copper ports in 1 rack unit (RU) form factor

    ●   Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor

    ●   Software support for IPv4 and IPv6 routing, multicast routing, modular quality of service (QoS), Flexible NetFlow (FNF), and enhanced security features

    ●   Single universal Cisco IOS® Software image across all license levels, providing an easy upgrade path for software features

    ●   Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement and 90-day access to Cisco Technical Assistance Center (TAC) support

    Switch Configurations

    All switches ship with one of the five power supplies (350WAC, 715WAC, 750WAC, 1100WAC, or 440WDC)[5]. Figures 1 through 3 show the Cisco Catalyst 3850 Series Switches.

    Figure 1.      Cisco Catalyst 3850 Series Switches

     

    Figure 2.      Cisco Catalyst 3850 Switches with 12 and 24 1/10 Gigabit Ethernet SFP+ Ports

     

    Figure 3.      Cisco Catalyst 3850 Switches with 12 and 24 1 Gigabit Ethernet SFP Ports

     

    Table 1 shows the Cisco Catalyst 3850 Series configurations.

    Table 1.       Cisco Catalyst 3850 Series Configurations

    Models

    Total 10/100/1000 or SFP or SFP+ Ports

    Default AC Power Supply

    Available PoE Power

    StackWise-480

    StackPower

    WS-C3850-24T

    24

    350WAC

    -

    Yes

    Yes

    WS-C3850-48T

    48

    WS-C3850-24P

    24 PoE+

    715WAC

    435W

    WS-C3850-48P

    48 PoE+

    WS-C3850-48F

    48 PoE+

    1100WAC

    800W

    WS-C3850-24U

    24 UPOE

    1100WAC

    800W

    WS-C3850-48U

    48 UPOE

    1100WAC

    800W

    WS-C3850-24XU

    24 UPOE (100Mbps/1/2.5/5/10 Gbps)

    1100WAC

    580W

    WS-C3850-12X48U

    48 UPOE (with 12 100Mbps/1/2.5/5/10 Gbps Ports)

    1100WAC

    630W

    WS-C3850-12S

    12 SFP

    350WAC

     

    WS-C3850-24S

    24 SFP

    WS-C3850-12XS

    12 1/10G SFP+

    350WAC

    -

    WS-C3850-24XS

    24 1/10G SFP+

    715 WAC

    -

    WS-C3850-48XS

    48 1/10G SFP+

    750WAC (front to back)

    -

    No

    No

    Network Modules

    The Cisco Catalyst 3850 Series Switches support five optional network modules for uplink ports. The default switch configuration does not include the network module[6]. At the time of switch purchase the customer has the flexibility to choose from the network modules described in Table 2.

    Figure 4 shows the following network modules:

    ●   4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP) receptacles

    ●   2 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP receptacles

    ●   4 x 10 Gigabit Ethernet with SFP+ receptacles (supported only on the 48-port Gigabit Ethernet models or on the 12-port or higher 10 Gigabit Ethernet models)

    Figure 4.      Network Modules with Four Gigabit Ethernet, Two 10 Gigabit Ethernet SFP+, or Four 10 Gigabit Ethernet 
    SFP+ Interfaces

     

    Figure 5 shows the following network modules:

    ●   8 x 10 Gigabit Ethernet with Small Form-Factor Pluggable+ (SFP+) receptacles

    ●   2 x 40 Gigabit Ethernet with Quad Small Form-Factor Pluggable+ (QSFP+) receptacles

    Figure 5.      Network Modules with Two 40 Gigabit Ethernet QSFP+ or Eight 10 Gigabit Ethernet SFP+ Interfaces

     

    Table 2.       Network Module Numbers and Descriptions

    Product Number

    Product Description

    WS-C3850-24XU

    WS-C3850-12X48U

    WS-C3850-12XS

    WS-C3850-24XS

    C3850-NM-4-1G

    4 x Gigabit Ethernet network modules

    Supported

    Not supported

    C3850-NM-2-10G

    4 x Gigabit Ethernet/2 x 10 Gigabit Ethernet network modules

    Supported

    Not supported

    C3850-NM-4-10G

    4 x Gigabit Ethernet/4 x 10 Gigabit Ethernet network modules

    Supported

    Supported

    C3850-NM-8-10G

    8 x Gigabit Ethernet/8 x 10 Gigabit Ethernet network modules

    Supported

    See note

    C3850-NM-2-40G

    2 x 40 Gigabit Ethernet network modules

    Supported

    See note

    Note:    The C3850-NM-4-10G module is supported only on the 48-port Gigabit Ethernet models or on the 12-port or higher 10 Gigabit Ethernet models. The C3850-NM-8x10G and C3850-NM-2x40G modules are supported on the 24-port and 48-port multigigabit switches and also on the 24-port 10G SFP+ switch model. The C3850-NM-4-1G and C3850-NM-2-10G modules are not supported on the 12-port and 24-port SFP+ models.

    Table 3.       Network Module Compatibility Matrix

    Models

    Network Modules

    WS-C3850-24T

    C3850-NM-4-1G, C3850-NM-2-10G

    WS-C3850-48T

    C3850-NM-4-1G, C3850-NM-2-10G, C3850-NM-4-10G

    WS-C3850-24P

    C3850-NM-4-1G, C3850-NM-2-10G

    WS-C3850-48P

    C3850-NM-4-1G, C3850-NM-2-10G, C3850-NM-4-10G

    WS-C3850-48F

    C3850-NM-4-1G, C3850-NM-2-10G, C3850-NM-4-10G

    WS-C3850-24U

    C3850-NM-4-1G, C3850-NM-2-10G

    WS-C3850-48U

    C3850-NM-4-1G, C3850-NM-2-10G, C3850-NM-4-10G

    WS-C3850-24XU

    C3850-NM-4-1G, C3850-NM-2-10G, C3850-NM-4-10G, C3850-NM-8-10G, C3850-NM-2-40G

    WS-C3850-12X48U

    C3850-NM-4-1G, C3850-NM-2-10G, C3850-NM-4-10G, C3850-NM-8-10G, C3850-NM-2-40G

    WS-C3850-12S

    C3850-NM-4-1G, C3850-NM-2-10G

    WS-C3850-24S

    C3850-NM-4-1G, C3850-NM-2-10G

    WS-C3850-12XS

    C3850-NM-4-10G

    WS-C3850-24XS

    C3850-NM-4-10G, C3850-NM-8-10G, C3850-NM-2-40G

    WS-C3850-48XS

    None

    An SFP+ receptacle supports both 10 Gigabit Ethernet and Gigabit Ethernet modules, allowing customers to use their investment in Gigabit Ethernet SFP modules and upgrade to 10 Gigabit Ethernet when business demands change without having to do a comprehensive upgrade of the access switch. In contrast, SFP receptacles can be used only as Gigabit Ethernet ports, as shown in the examples in Table 4.

    Table 4.       Network Module Configuration Examples

     

    Interface Options

    Network Module

    10 Gigabit Ethernet SFP+ Ports

    Gigabit Ethernet SFP Ports

    4 x Gigabit Ethernet

    0

    4

    4 x Gigabit Ethernet/2 x10 Gigabit Ethernet network modules

    2

    0

    1

    3

    2

    2

    0

    4

    4 x Gigabit Ethernet/4 x10 Gigabit Ethernet network modules

    4

    0

    0

    4

    2

    2

    3

    1

    1

    3

    Dual Redundant Modular Power Supplies

    The Cisco Catalyst 3850 Series Switches support dual redundant power supplies[7]. The switch ships with one power supply by default, and the second power supply can be purchased at the time of ordering the switch or at a later time. If only one power supply is installed, it should always be in power supply bay 1. The switch also ships with three field-replaceable fans. (See Figure 6.)

    Figure 6.      Dual Redundant Power Supplies

     

    Table 5 shows the different power supplies available in these switches and available PoE power.

    Table 5.       Power Supply Models

    Models

    Default Power Supply

    Available PoE Power

    24-port data switch

    PWR-C1-350WAC

    -

    48-port data switch

    24-port PoE switch

    PWR-C1-715WAC

    435W

    48-port PoE switch

    48-port full PoE switch

    PWR-C1-1100WAC

    800W

    24-port UPOE switch

    PWR-C1-1100WAC

    800W

    48-port UPOE switch

     

     

    24-port Multigigabit UPOE switch

    PWR-C1-1100WAC

    580W

    48-port Multigigabit UPOE switch

    PWR-C1-1100WAC

    630W

    12-port SFP switch

    PWR-C1-350WAC

    -

    24-port SFP switch

    12-port SFP+ switch

    PWR-C1-350WAC

    -

    24-port SFP+ switch

    PWR-C1-715WAC

    -

    48-port SFP+ switch (WS-C3850-48XS-S and WS-C3850-48XS-E)

    PWR-C3-750WAC-R

    -

    48-port SFP+ switch (WS-C3850-48XS-F-S and WS-C3850-48XS-F-E)

    PWR-C3-750WAC-F

    -

    In addition to the power supplies listed in Table 5, a 440WDC power supply is available as a configuration option and also as a spare (that is, it can be ordered separately) on all switch models. The DC power supply also delivers PoE capabilities for maximum flexibility (refer to Table 6 for available PoE budget with DC power supplies). Customers can mix and match the AC and DC power supplies in the two available power supply slots. Any of these power supplies can be installed in any of the switches.

    Table 6.       Available PoE with DC Power Supply

    Model

    Number of 440WDC Power Supplies

    Total Available PoE Budget

    24-port PoE switch

    1

    220W

    2

    660W

    48-port PoE switch

    1

    185W

    2

    625W

    24-port Mgig UPoE switch

    2

    360W

    48-port Mgig UPoE switch

    2

    410W

    Power over Ethernet Plus (PoE+)

    In addition to PoE (IEEE 802.3af), the Cisco Catalyst 3850 Series Switches support PoE+ (IEEE 802.3at standard), which provides up to 30W of power per port. The Cisco Catalyst 3850 Series Switches can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones, Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE 802.3at-compliant end device. PoE removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. Table 7 shows the power supply combinations required for different PoE needs.

    Table 7.       Power Supply Requirements for PoE and PoE+

     

    24-Port PoE Switch

    48-Port PoE Switch

    PoE on all ports (15.4W per port)

    One PWR-C1-715WAC

    One PWR-C1-1100WAC or two PWR-C1-715WAC

    PoE+ on all ports (30W per port)

    One PWR-C1-1100WAC or two PWR-C1-715WAC

    Two PWR-C1-1100WAC or one PWR-C1-1100WAC and one PWR-C1-715WAC

    Cisco Universal Power over Ethernet (UPOE)

    Cisco Universal Power over Ethernet (Table 8) is a breakthrough technology, offering the following services and benefits.

    ●   60W per port to enable a variety of end devices such as Samsung VDI client, BT IP turret systems in trading floors, Cisco Catalyst compact switches in retail/hospitality environments, personal Cisco TelePresence® systems, and physical access control devices

    ●   High availability for power and guaranteed uninterrupted services, a requirement for critical
    applications (e911)

    ●   Lowering OpEx by providing network resiliency at lower cost by consolidating backup power into
    the wiring closet

    ●   Faster deployment of new campus access networking infrastructures by eliminating the need for a power outlet for every endpoint

    Table 8.       Power Supply Requirements for UPOE

     

    24-Port UPOE Switch

    48-Port UPOE Switch

    24-Port Multigigabit UPOE Switch

    48-Port Multigigabit UPOE Switch

    UPOE (60W per port) on all
    (24 port switch) or max. 30 ports (48 port switch)

    One PWR-C1-1100WAC and one PWR-C1-715WAC

    Two PWR-C1-1100WAC

    Two PWR-C1-1100WAC

    Two PWR-C1-1100WAC

    Cisco Catalyst Multigigabit Ethernet Technology

    Cisco Multigigabit Ethernet is a unique Cisco innovation to the new Cisco Catalyst Ethernet Access Switches. With the enormous growth of 802.11ac and new wireless applications, wireless devices are promoting the demand for more network bandwidth. This creates a need for a technology that supports speeds higher than 1 Gbps on all cabling infrastructure. Cisco Multigigabit technology allows you to achieve bandwidth speeds from 1 Gbps through 10 Gbps over traditional Cat 5e cabling or above. In addition, the Multigigabit ports on select Cisco Catalyst switches support UPOE, which is increasingly important for next-generation workspaces and Internet of Things (IoT) ecosystems.

    Cisco Multigigabit technology offers significant benefits for a diverse range of speeds, cable types, and PoE power. The benefits can be grouped into three different areas:

    ●   Multiple speeds: Cisco Multigigabit technology supports autonegotiation of multiple speeds on switch ports. The supported speeds are 100 Mbps, 1 Gbps, 2.5 Gbps, and 5 Gbps on Cat 5e cable and up to 10 Gbps over Cat 6a cabling.

    ●   Cable type: The technology supports a wide range of cable types, including Cat 5e, Cat 6, and Cat 6a or above.

    ●   PoE power: The technology supports PoE, PoE+, and UPOE for all the supported speeds and cable types.

    For more information, visit http://www.cisco.com/c/en/us/solutions/enterprise-networks/catalyst-multigigabit-switching/index.html.

    Benefits

    Converged Wired plus Wireless Access

    The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE Software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular QoS, security, and Flexible Netflow (FNF) across wired and wireless in a seamless fashion. Also, the wired plus wireless features are bundled into a single Cisco IOS Software image, which reduces the number of software images that users have to qualify/certify before enabling them in their network. The single console port for command-line interface (CLI) management reduces the number of touch points to manage for wired plus wireless services, thereby reducing network complexity, simplifying network operations, and lowering the TCO to manage the infrastructure.

    Converged wired plus wireless not only improves wireless bandwidth across the network but also the scale of wireless deployment. Each 48-port Cisco Catalyst 3850 provides 40 Gbps of wireless throughput (20 Gbps on the 24-port/12-port models). This wireless capacity increases with the number of members in the stack. This makes sure that the network can scale with current wireless bandwidth requirements, as dictated by IEEE 802.11n-based access points and with future wireless standards such as IEEE 802.11ac. Additionally, the Cisco Catalyst 3850 distributes the wireless controller functions to achieve better scalability. Each Cisco Catalyst 3850 switch/stack can operate as the wireless controller in two modes (Figure 7):

    ●   Mobility agent (MA): This is the default mode in which a Cisco Catalyst 3850 switch ships. In this mode the switch is capable of terminating the CAPWAP tunnels from the access points and providing wireless connectivity to wireless clients. Maintaining wireless client databases and configuring and enforcing security and QoS policies for wireless clients and access points can be enforced in this mode. No additional license on top of IP Base is required to operate in the mobility agent mode.

    ●   Mobility controller (MC): In this mode, the Cisco Catalyst 3850 switch can perform all the mobility agent tasks in addition to mobility coordination, radio resource management (RRM), and Cisco CleanAir® coordination within a mobility subdomain. The mobility controller mode can be enabled on the switch CLI. IP Base license level is required when the Cisco Catalyst 3850 switch is acting as the mobility controller. A centrally located Cisco 5508 Wireless LAN Controller (WLC 5508), Cisco Wireless Services Module 2 (WiSM2) (when running AireOS Version 7.3), and Wireless LAN Controller 5760 can also perform this role for larger deployments.

    With mobility agents located in the wiring closets providing 40 Gbps of wireless per 48-port Gigabit Ethernet RJ45 switch (nx 40 Gbps for a stack of n switches) and mobility controllers managing some of the central wireless functions, the converged access-based wireless deployment provides best-in-class scalability for wireless and significantly improved wireless throughput.

    Figure 7.      Mobility Controller (MC) and Mobility Agent (MA)

     

    For more information about Converged Wired plus Wireless Access, refer to the Q&A document here:http://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-3850-series-switches/cisco-catalyst-3850-series-switches-faq.pdf.

    Distributed Intelligent Services

    Flexible NetFlow (FNF)

    Full visibility into the wired plus wireless traffic is achieved because of the access point Control and Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch. This helps identify users and user traffic flows in order to identify potential attackers and take corrective action at the access layer before the attack penetrates further into the network. This is achieved using FNF, which monitors every single flow entering and exiting the switch stack for wired and wireless users. It also helps identify the top wired/wireless talkers and enforce appropriate bandwidth provisioning policies.

    QoS

    The Cisco Catalyst 3850 switch has advanced wired plus wireless QoS capabilities. It uses the Cisco modular QoS command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level and drilling further down to per-radio, per-service set identification (SSID), and per-user levels. This helps manage and prioritize available bandwidth between various radios and various SSIDs (enterprise, guest, and so on) within each radio on a percentage basis. The switch is also capable of automatically allocating equal bandwidth among the connected users within a given SSID. This makes sure that all users within a given SSID get a fair share of the available bandwidth while being connected to the network. The UADP ASIC enables the hierarchical bandwidth management and fair sharing of bandwidth, thereby providing hardware-based QoS for optimized performance at line-rate traffic.

    In addition to these capabilities, the switch is able to do class of service (CoS) or differentiated services code point (DSCP) based queuing, policing, shaping, and marking of wired plus wireless traffic. This enables users to create common policies that can be used across wired plus wireless traffic. The Cisco Catalyst 3850 also supports downloadable policy names from the Cisco Identity Services Engine (ISE) when a user successfully authenticates to the network using the ISE.

    Security

    The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, port security, Dynamic Host Configuration Protocol (DHCP) Snooping and Guard, Dynamic ARP Inspection, RA Guard, IP Source Guard, control plane protection (CoPP), wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users and attackers. With a variety of wired plus wireless users connecting to the network, the switch supports session-aware networking, in which each device connected to the network is identified as one session, and unique access control lists (ACLs) and/or QoS policies can be defined and applied using the ISE for each of these sessions, providing better control on the devices connecting to the network.

    Resiliency

    Cisco StackWise-480 Technology

    Cisco StackWise-480 technology is built on the highly successful industry-leading StackWise® technology, which is a premium stacking architecture[8]. StackWise-480 has a stack bandwidth of 480 Gbps. StackWise - 480 uses Cisco IOS Software SSO for providing resiliency within the stack. The stack behaves as a single switching unit that is managed by an “active” switch elected by the member switches.

    The active switch automatically elects a standby switch within the stack. The active switch creates and updates all the switching/routing/wireless information and constantly synchronizes that information with the standby switch. If the active switch fails, the standby switch assumes the role of the active switch and continues to the keep the stack operational. Access points continue to remain connected during an active-to-standby switchover.

    A working stack can accept new members or delete old ones without service interruption. StackWise-480 creates a highly resilient single unified system of up to nine switches, providing simplified management using a single IP address, single Telnet session, single CLI, autoversion checking, autoupgrading, autoconfiguration, and more. StackWise-480 also enables local switching in Cisco Catalyst 3850 Series Switches.

    Cisco StackPower Technology

    The Cisco Catalyst 3850 Series uses the Cisco StackPower[9] technology present on the Cisco Catalyst 3850 Series. StackPower is an innovative power interconnect system that allows the power supplies in a stack to be shared as a common resource among all the switches. Cisco StackPower unifies the individual power supplies installed in the switches and creates a pool of power, directing that power where it is needed. Up to four switches[10]can be configured in a StackPower stack with the special connector at the back of the switch using the StackPower cable, which is different than the StackWise-480 cables. (See Figure 8.)

    Figure 8.      StackWise-480 and StackPower Connectors

     

    StackPower can be deployed in either power-sharing mode or redundancy mode. In power-sharing mode, the power of all the power supplies in the stack is aggregated and distributed among the switches in the stack. In redundant mode, when the total power budget of the stack is calculated, the wattage of the largest power supply is not included. That power is held in reserve and used to maintain power to switches and attached devices when one power supply fails, enabling the network to operate without interruption. Following the failure of one power supply, the StackPower mode becomes power sharing.

    StackPower allows customers to simply add one extra power supply in any switch of the stack and either provide power redundancy for any of the stack members or simply add more power to the shared pool. StackPower eliminates the need for an external redundant power system or installation of dual power supplies in all the stack members. StackPower is available in LAN Base license level (or higher). For LAN Base, cables need to be purchased separately.

    Foundation for Open Network Environment

    The heart of the Cisco Catalyst 3850 is the UADP ASIC with programmability for future features and intelligence with investment protection. The new ASIC provides the foundation for converged APIs across wired and wireless, Cisco Open Network Environment, software-defined networking (SDN) readiness and OnePK SDK through software updates over the product lifetime.

    Software Features and Services on Cisco Catalyst 3850 Series Switches

    Software services supported on the Cisco Catalyst 3850 Series Switches can be classified into five broad categories:

    ●   Ease of operations

    ●   Advanced security features

    ●   Resiliency

    ●   Application visibility and control

    Ease of Operations

    The Cisco Catalyst 3850 helps reduce the operating costs through:

    ●   Cisco Catalyst Smart Operations

    ●   Easy-to-use deployment and control features

    ●   Efficient switch operations

    ●   Network management tools

    Cisco Catalyst Smart Operations

    Cisco Catalyst Smart Operations are a comprehensive set of capabilities that simplify LAN deployment, configuration, and troubleshooting. In addition to adaptive, always-on technologies such as StackWise-480 and StackPower, Cisco Catalyst Smart Operations enable zero-touch installation and replacement of switches, fast upgrade, and ease of troubleshooting with reduced operational cost. Cisco Catalyst Smart Operations are a set of features that includes Smart Install, Auto Smartports, Smart Configuration and Smart Troubleshooting to enhance operational excellence:

    ●   Cisco Smart Install is a transparent plug-and-play technology to configure the Cisco IOS Software image and switch configuration without user intervention. Smart Install utilizes dynamic IP address allocation and the assistance of other switches to facilitate installation, providing transparent network plug and play.

    ●   Cisco Auto Smartports provide automatic configuration as devices connect to the switch port, allowing autodetection and plug and play of the device onto the network.

    ●   Cisco Smart Troubleshooting is an extensive array of debug diagnostic commands and system health checks within the switch, including Generic Online Diagnostics (GOLD) and Onboard Failure Logging (OBFL).

    ●   Embedded Event Manager (EEM) is a powerful and flexible feature that provides real-time network event detection and onboard automation. Using EEM, customers can adapt the behavior of their network devices to align with their business needs. This feature requires the IP Base feature set.

    Easy-to-Use Deployment and Control Features

    ●   User experience:

    ◦    IP service-level agreements (SLAs) enable customers to assure new business-critical IP applications, as well as IP services that utilize data, voice, and video, in an IP network. This feature requires the IP Services feature set.

    ◦    DHCP autoconfiguration of multiple switches through a boot server eases switch deployment.

    ◦    Automatic QoS (AutoQoS) simplifies QoS configuration in voice over IP (VoIP) networks by issuing interface and global switch commands to detect Cisco IP phones, classify traffic, and help enable egress queue configuration.

    ◦    Autonegotiation on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth.

    ◦    Automatic media-dependent interface crossover (MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight through) is installed.

    ●   Simplified configuration and connectivity:

    ◦    Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports.

    ◦    Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel groups or Gigabit EtherChannel groups to link to another switch, router, or server.

    ◦    Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.

    ◦    Unidirectional Link Detection Protocol (UDLD) and aggressive UDLD allow unidirectional links caused by incorrect fiber-optic wiring or port faults to be detected and disabled on fiber-optic interfaces.

    ◦    Cisco VLAN Trunking Protocol (VTP) Version 3 supports dynamic VLANs and dynamic trunk configuration across all switches.

    ●   Efficient switch operation:

    ◦    Switching database manager (SDM) templates, VLAN template (specific to LAN Base license level), and advanced template allow the administrator to automatically optimize the ternary content-addressable memory (TCAM) allocation to the desired features based on deployment-specific requirements.

    ◦    Local proxy Address Resolution Protocol (ARP) works in conjunction with private VLAN edge to minimize broadcasts and maximize available bandwidth.

    ◦    Stacking master configuration management with Cisco StackWise-480 technology helps make sure that all switches are automatically upgraded when the master switch receives a new software version. Automatic software version checking and updating help ensure that all stack members have the same software version.

    ◦    Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.

    ◦    Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.

    ●   Multicast:

    ◦    Optimized multicast for wired plus wireless: Cisco Catalyst 3850 offers greater multicast efficiency by receiving only one multicast stream and replicating it for all connected wired plus wireless devices connected to that switch.

    ◦    Internet Group Management Protocol (IGMP) v1, v2, v3 snooping for IPv4: multicast listener discovery (MLD) v1 and v2 snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.

    ●   Monitoring:

    ◦    Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network.

    ◦    For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events).

    ◦    Layer 2 traceroute eases troubleshooting by identifying the physical path that a packet takes from source to destination.

    ◦    Wireless RF management provides both real-time and historical information about RF interference affecting network performance across controllers using systemwide Cisco CleanAir technology integration.

    Efficient Switch Operation

    Cisco Catalyst 3850 Series Switches, designed and engineered by Cisco, provide optimum power-saving, EEE (on RJ45 ports), low-power operations for industry best-in-class power management and power consumption capabilities. The Cisco Catalyst 3850 ports are capable of reduced power modes so that ports not in use can move into a lower power utilization state. Other efficient switch operation features are:

    ●   Cisco Discovery Protocol Version 2 allows the Cisco Catalyst 3850 Series Switches to negotiate a more granular power setting when connecting to a Cisco powered device such as IP phones or access points than what is provided by IEEE classification.

    ●   Per-port power consumption command allows customers to specify maximum power setting on an individual port. Per-port PoE power sensing measures actual power being drawn, enabling more intelligent control of powered devices.

    ●   The PoE MIB provides proactive visibility into power usage and allows customers to set different power-level thresholds.

    Environmental Responsibility

    Organizations may choose to turn off access point radios to reduce power consumption during off-peak hours. The integrated wireless LAN controller avoids the deployment of additional devices in the network.

    Network Management Tools

    The Cisco Catalyst 3850 Series Switches offer both a superior CLI for detailed configuration and Cisco Prime infrastructure for unified wired plus wireless management. Prime infrastructure provides day 0 and ongoing provisioning, ongoing monitoring and maintenance, configuration templates, and device and user 360-degree views and serves as the FNF collector for user traffic views using the Prime Assurance Manager module.

    For detailed information about Cisco Prime infrastructure, go to http://www.cisco.com/en/US/products/ps12239/index.html.

    Advanced Security Features

    Cisco Catalyst 3850 Series Switches support advanced security features including but not limited to:

    ●   Protection against attackers:

    ◦    Port security secures the access to an access or trunk port based on MAC address. It limits the number of learned MAC addresses to deny MAC address flooding.

    ◦    DHCP snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses. This feature is used by other primary security features to prevent a number of other attacks such as ARP poisoning.

    ◦    Dynamic ARP inspection (DAI) helps ensure user integrity by preventing malicious users from exploiting the insecure nature of ARP.

    ◦    IP source guard prevents a malicious user from spoofing (that is, taking over) another user’s IP address by creating a binding table between the client’s IP and MAC address, port, and VLAN, and by using it to selectively block bogus packets.

    ◦    The Unicast Reverse Path Forwarding (uRPF) feature helps mitigate problems caused by the introduction of malformed or forged (spoofed) IP source addresses into a network by discarding IP packets that lack a verifiable IP source address.

    ◦    Bidirectional data support on a SPAN port allows the Cisco intrusion detection system (IDS) to take action when an intruder is detected.

    ●   User authentication:

    ◦    Flexible authentication that supports multiple authentication mechanisms, including 802.1X, MAC authentication bypass, and web authentication using a single, consistent configuration.

    ◦    RADIUS change of authorization and downloadable calls for comprehensive policy management capabilities.

    ◦    Private VLAN edge restricts traffic between hosts in a switch by segregating traffic at Layer 2, turning a broadcast segment into a nonbroadcast multiaccess like segment. Private VLAN edge provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic.

    ◦    Multidomain authentication allows an IP phone and a PC to authenticate on the same switch port while placing them on appropriate voice and data VLAN.

    ◦    MAC address notification allows administrators to be notified of users added to or removed from the network.

    ◦    Mobility and security for secure, reliable wireless connectivity and consistent end-user experience. Increased network availability through proactive blocking of known threats.

    ◦    IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits the number of concurrent multicast streams available per port.

    ●   ACLs:

    ◦    Cisco security VLAN ACLs on all VLANs prevent unauthorized data flows from being bridged within VLANs.

    ◦    Cisco standard and extended IP security router ACLs define security policies on routed interfaces for control-plane and data-plane traffic. IPv6 ACLs can be applied to filter IPv6 traffic.

    ◦    Port-based ACLs for Layer 2 interfaces allow security policies to be applied on individual switch ports.

    ●   Device access:

    ◦    Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSH Protocol, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.

    ◦    TACACS+ and RADIUS authentication facilitates centralized control of the switch and restricts unauthorized users from altering the configuration.

    ◦    Multilevel security on console access prevents unauthorized users from altering the switch configuration.

    ●   Bridge protocol data unit (BPDU) Guard shuts down Spanning Tree PortFast-enabled interfaces when BPDUs are received to avoid accidental topology loops.

    ●   Spanning Tree Root Guard (STRG) prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes.

    ●   Wireless end-to-end security offers CAPWAP-compliant DTLS encryption to make sure of encryption between access points and controllers across remote WAN/LAN links.

    Resiliency

    Borderless networks enable enterprise mobility and business-grade video services. Industry’s first unified network (wired plus wireless) location services enable tracking of mobile assets and the users of those assets for both wired plus wireless devices. The true borderless experience is enabled by the following feature sets in the Cisco Catalyst 3850 Series Switches:

    ●   High availability

    ●   High-performance IP routing

    ●   Superior QoS

    High Availability

    In addition to StackWise-480 and StackPower[11], the Cisco Catalyst 3850 Series supports high-availability features including but not limited to the following:

    ●   Cross-Stack EtherChannel provides the ability to configure Cisco EtherChannel technology across different members of the stack for high resiliency.

    ●   Flexlink provides link redundancy with convergence time less than 100ms.

    ●   IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) provides rapid spanning-tree convergence independent of spanning-tree timers and also offers the benefit of Layer 2 load balancing and distributed processing.

    ●   Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree (IEEE 802.1w) reconvergence on a per-VLAN spanning-tree basis, providing simpler configuration than MSTP. In both MSTP and PVRST+ modes, stacked units behave as a single spanning-tree node.

    ●   Switch-port autorecovery (“err-disable” recovery) automatically attempts to reactivate a link that is disabled because of a network error.

    * Stackpower is not supported on the 48-port 10G SFP+ switch model

    High-Performance IP Routing

    The Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 3850 Series Switches:

    ●   IP unicast routing protocols (static, Routing Information Protocol Version 1 [RIPv1], and RIPv2, RIPng, Enhanced Interior Gateway Routing Protocol [EIGRP] stub) are supported for small-network routing applications with the IP Base feature set. Limited static routing with the LAN Base feature set. Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.

    ●   Advanced IP unicast routing protocols (Open Shortest Path First [OSPF], EIGRP, Border Gateway Protocol Version 4 [BGPv4], and Intermediate System-to-Intermediate System Version 4 [IS-ISv4]) are supported for load balancing and constructing scalable LANs. IPv6 routing (OSPFv3, EIGRPv6) is supported in hardware for maximum performance. OSPF for routed access is included in the IP Base image. The IP Services feature set is required for full OSPF, EIGRP, BGPv4, and IS-ISv4.

    ●   Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing protocol configured. Virtual routing and forwarding (VRF)-Lite enables a service provider to support two or more VPNs, with overlapping IP addresses. The IP Services feature set is required.

    ●   Protocol-independent multicast (PIM) for IP multicast routing is supported, including PIM sparse mode (PIM‑SM), PIM dense mode (PIM-DM), PIM sparse-dense mode, and source-specific multicast (SSM). The IP Services feature set is required.

    ●   IPv6 addressing is supported on interfaces with appropriate show commands for monitoring and troubleshooting.

    Superior QoS

    The Cisco Catalyst 3850 Series offers Gigabit Ethernet speed with intelligent services that keep traffic flowing smoothly, even at 10 times the normal network speed. Industry-leading mechanisms for cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed.

    The following are some of the QoS features supported in the Cisco Catalyst 3850 Series Switches:

    ●   Granular wireless bandwidth management and fair sharing use Cisco’s proven Cisco IOS Software and UADP ASIC technology to provide hierarchical bandwidth management at line rate (per access point, per radio, per SSID, per client-based policies). Fair sharing across the users within an SSID makes sure that no single user is starved because of other heavy-hitting users. Fair sharing is automatically enabled for wireless at user level as well as SSID level.

    ●   802.1p CoS and DSCP field classification is provided, using marking and reclassification on a per-packet basis by source and destination IP address, MAC address, or Layer 4 Transmission Control Protocol/User Datagram Protocol (TCP/UDP) port number.

    ●   Shaped round robin (SRR) scheduling helps ensure differential prioritization of packet flows by intelligently servicing the ingress queues and egress queues. Weighted tail drop (WTD) provides congestion avoidance at the ingress and egress queues before a disruption occurs. Strict priority queuing helps ensure that the highest priority packets are serviced ahead of all other traffic.

    ●   The Cisco committed information rate (CIR) function provides bandwidth in increments as low as

    Additional Information

    SKU WS-C3850-12S-S-RF
    Weight (Kg) 7
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/data_sheet_c78-720918.html
    Condition Refresh
    Switch Series 3800 Series
    Device Type Fixed
    Power Rating 350 watts
    Number of Access Ports 12
    Access Port Speed 1 Gbps
    Number of Uplink Ports None
    Uplink Ports Speed Not Available
    PoE Ports Non PoE
    Rack Mountable Yes
    Stackable Yes

    WS-C3850-12S-S-RF

    AED

    AED 0

    0