WS-CBS3120G-S-RF

Double click on above image to view full picture

Zoom Out
Zoom In

WS-CBS3120G-S-RF

Description:

Cisco Refurbished
Original Part No : WS-CBS3120G-S

Catalyst Blade Switch 3120G for HPw/ IPBase REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 6000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco Catalyst® Blade Switch 3120 for HP represents the next-generation I/O solution for blade server environments. Built from the ground up on the purpose-built Cisco® hardware and market-leading Cisco IOS®Software, the Cisco Catalyst Blade Switch 3120 (Figure 1) is engineered with innovative technologies specifically designed to meet the rigors of blade server-based application infrastructure. Specifically, the switch is designed to deliver scaleable, high-performance, highly resilient blade server connectivity while supporting ongoing IT initiatives to reduce server infrastructure complexity and total cost of ownership (TCO).

    Figure 1. Cisco Catalyst Blade Switch 3120 for HP

    Configurations

    The Cisco Catalyst Blade Switch 3120 for HP has two configurations and SKUs.

    Configuration 1: Cisco Catalyst Blade Switch 3120G for HP

    • 8 Gigabit Ethernet uplink ports: 4 10/100/1000BASE-T ports and 4 Small Form-Factor Pluggable (SFP) Gigabit Ethernet ports

    Configuration 2: Cisco Catalyst Blade Switch 3120X for HP

    • 4 10/100/1000BASE-T ports and 2 X2-based 10 Gigabit Ethernet ports

    • The Cisco TwinGig Converter Module can be used in place of X2 modules. The Cisco TwinGig module converts a single 10 Gigabit Ethernet X2 interface into two Gigabit Ethernet SFP ports.

    Virtual Blade Switch (VBS) Technology

    With the Cisco Catalyst Blade Switch 3120, Cisco introduces a unique technology called the virtual blade switch (VBS). This switch virtualization technology treats the interconnected physical switches within a rack as one logical switch.

    Main Benefits of VBS Technology

    • VBS reduces infrastructure complexity, improves network resiliency, and increases the operational manageability of the blade-switching environment.

    • VBS offers exceptional scalability by providing up to160 Gbps of upstream bandwidth.

    • VBS can increase the bandwidth available to a server eightfold.

    • Because the VBS appears as a single node, both the Layer 2 and Layer 3 topologies are greatly simplified, increasing fabric stability and reducing convergence times after a topology change.

    • The capability to mix-and-match 10 Gigabit Ethernet switches provides customers with a cost-effective migration path. In addition, the advanced operations and troubleshooting tools reduce operating expenses.

    Figure 2. Switches interconnected in a rack are treated as a single logical switch

    Cisco blade switches provide an easy, smart, and flexible blade server I/O solution that allows customers to reap the full benefits offered by the blade server architecture:

    • Easy: Easy to operate and deploy

    – Because there are fewer switches to manage with VBS technology, helps solve the problem of switch sprawl

    – Provides consistent management interface and tools throughout the Cisco data center and blade switch portfolio, accelerating service provisioning and simplifying troubleshooting

    – Through VBS technology, provides operational transparency and efficiency during replacement and addition of switches

    • Smart: Feature-rich, "server-smart" networking solution

    – Provides highly resilient LAN uplinks to increase blade server and virtual machine availability using innovations such as trunk failover and EtherChannel

    – Helps secure application servers and virtual machines using private VLANs and access control lists (ACLs)

    – Provides intelligent congestion management mechanisms to optimize network bandwidth using quality of service (QoS)

    – Provides advanced Layer 2 and 3, IPv4 and IPv6, and multicast capabilities to facilitate smart end-to-end server networking in the data center

    • Flexible: Flexible solution to scale resources and facilitate data center virtualization

    – Through VBS, provides flexibility to configure network topology based on application needs such as performance, scalability, and resiliency

    – Through VBS, provides investment protection and a flexible transition path with the capability to mix and match Gigabit Ethernet and 10 Gigabit Ethernet switches

    – Provides flexible options for configuration and management such as a command-line interface (CLI) and a GUI

    Cisco Catalyst Blade Switch 3120 Software

    The Cisco Catalyst Blade Switch 3120 ships with the IP Base feature set. The IP Base feature set includes advanced QoS, a suite of security features, rate-limiting, ACLs, and basic static and Routing Information Protocol (RIP) routing capability.
    Customers can upgrade the software to the IP Services feature set. The IP Services feature set provides a richer set of enterprise-class features, including advanced hardware-based IP unicast and multicast routing: Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF), Border Gateway Protocol (BGP), Protocol Independent Multicast (PIM), and IPv6 routing.

    Features and Benefits

    Table 1 summarizes product features and benefits.

    Table 1. Features and Benefits

     

     

    Features

    Benefits

    Ease of use

    • Capability to virtualize 8 switches into 1
    • Automatic software version checking
    • Automatic configuration synchronization
    • Dynamic Trunking Protocol (DTP)
    • Reduces network complexity and simplifies configuration and maintenance
    • Provides automatic configuration and versioning that enables true immediate availability (plug-and-play) capabilities during scheduled maintenance

    Availability

    • Multiswitch EtherChannel
    • Trunk failover
    • FlexLeink
    • Rapid Spanning Tree Protocol (RTSP)
    • Multiple Spanning Tree (MST) Protocol
    • Increases resiliency and availability during switch failures
    • Quickly reroutes traffic during uplink failures
    • Achieves convergence within 100 milliseconds (ms) during link failures
    • Provides fast convergence to reduce downtime during spanning-tree failures

    QoS

    • Wire-rate QoS performance
    • Policing and rate limiting
    • Traffic shaping
    • Queuing
    • Provides industry-leading mechanisms for marking, classification, and scheduling to deliver superior performance for data, voice, and video traffic, all at wire speed
    • Can prioritize traffic based on application criticality
    • Can tightly control the amount of traffic a particular server or application can send or receive

    Security

    • Dynamic Address Resolution Protocol (ARP) Inspection (DAI)
    • Dynamic Host Configuration Protocol (DHCP) snooping
    • IP source guard
    • Private VLANs
    • Unicast Reverse Path Forwarding (URPF)
    • IEEE 802.1x port-based security
    • ACLs and VLAN ACLs (VACLs)
    • Secure Shell (SSH) Protocol
    • MAC address notification
    • Port security
    • Spanning Tree Protocol root guard and Bridge Protocol Data Unit (BPDU) guard
    • Provides comprehensive set of security features for connectivity and access control
    • Defends the network against various smurf, "man-in-the-middle," and denial-of-service (DoS) attacks
    • Protects against excessive broadcasts and multicasts

    High-performance IP routing

    • RIPv1 and v2, OSPF, EIGRP, and BGPv4
    • IPV6 RIP Next Generation (RIPng) and OSPFv3
    • Policy-based routing (PBR)
    • IP multicast routing (PIM Sparse Mode [SM], Dense Mode [DM], and Sparse-Dense Mode [SDM])
    • Provides feature-rich routing options to bring Layer 3 intelligence to the access switches
    • Helps ensure effective use of bandwidth resources by supporting Layer 3 multicast
    • Better utilizes network resources through load balancing

    Manageability

    • Single IP address for up to 8 switches
    • Cisco IOS Software CLI
    • SPAN and Remote SPAN (RSPAN) support
    • Layer 2 traceroute
    • Traffic statistics: Packet and error counters
    • Simple Network Management Protocol (SNMP) v1, v2, and v3
    • Remote monitoring (RMON)
    • Cisco Discovery Protocol
    • Limited support for Cisco IOS Embedded Event Manager (EEM)
    • Uses the user interface and command set common to all Cisco routers and Cisco Catalyst switches
    • Can remotely monitor ports in a Layer 2 switch network from any other switch in the same network
    • Provides rich set of MIB and object identifier (OID) support for comprehensive in-band management.
    • Provides excellent troubleshooting resources, including debugging tools, logs, and counters, to enable quick diagnosis of network problems

    Management tools

    • CiscoWorks LAN Management Solution (LMS)
    • Cisco Network Assistant
    • Cisco Device Manager
    • Provides powerful management tools that simplify the configuration, administration, monitoring, and troubleshooting of Cisco networks
    • Improves the accuracy and efficiency of operations staff and increases the overall availability of the network

     

    Product Specifications

    Table 2 lists hardware specifications, Table 3 lists management and standards support, and Table 4 lists safety and compliance information.

    Table 2. Hardware Specifications

     

     

    Description

    Specification

    Performance

    • Up to 128-Gbps switching fabric
    • Forwarding rate based on 64-byte packets; up to 59.2 million packets per second (mpps)
    • 256 MB double-data-rate (DDR) synchronous dynamic RAM (SDRAM) and 64 MB Flash memory
    • Configurable maximum transmission units (MTUs) of up to 9018 bytes (jumbo frames)
    • MAC, routing, security, and QoS scalability numbers depend on the type of template used in the switch:
     

    Default Template

    Access Template

    VLAN Template

    Routing Template

    MAC addresses

    6K

    4K

    12K

    3K

    IGMP groups and multicast routes

    1K

    1K

    1K

    1K

    Total unicast routes

    8K

    6K

    0

    11K

    Directly connected hosts

    6K

    4K

    0

    3K

    Indirect routes

    2K

    2K

    0

    8K

    Security access control entries)

    1K

    2K

    1K

    1K

    QoS access control entries)

    0.5K

    0.5K

    0.5K

    0.5K

    PBR access control entries)

    0

    0.5K

    0

    0.5K

    Connectors and cabling

    SKU 1: Cisco Catalyst Blade Switch 3120G

    • Supports up to 8 Gigabit Ethernet uplink ports: 4 10/100/1000BASE-T ports and 4 SFP-based Gigabit ports (using Cisco TwinGig Converter Modules)

    SKU 2: Cisco Catalyst Blade Switch 3120X

    • Supports up to 4 10/100/1000BASE-T ports and 2 X2-based 10 Gigabit ports
    • SFP and X2 cage supports only SFP and X2 modules from Cisco

    Common on both SKUs

    • 4 external 10/100/1000BASE-T ports
    • Management console port: RJ-45-to-DB9 cable for PC connections
    • 2 high-speed stack connectors
    Table 5 later in this document lists supported X2 modules.

    Power consumption

    12V at 5A (60W)

    Indicators

    Total of 18 LEDs on the faceplate:

    • 12 LEDs for uplink port status
    • 4 switch-status LEDs
    • 2 HP-specific LEDs to indicate health and user ID (UID) status

    Dimensions 
    (L x W x H)

    10.9 in. x 7.6 in. x 1.1 in.

    27.7 cm x 19.3 cm x 2.8 cm

    Weight

    Approximately 3 lb (1.36 kg)

    Environmental ranges

    • Operating temperature: 0 to 40°C (32 to 104 F)
    • Storage temperature: -25 to 70°C (-13 to 158 F)
    • Operating relative humidity: 10 to 85% noncondensing
    • Storage relative humidity: 5 to 95% noncondensing

    Predicted mean time between failure (MTBF)

    Approximately 387,000 hours

     

    Table 3. Management and Standards Support

     

     

    Description

    Specification

    MIB support

    • BRIDGE-MIB
    • CISCO-CDP-MIB
    • CISCO-CLUSTER-MIB
    • CISCO-CONFIG-MAN-MIB
    • CISCO-ENTITY-FRU-CONTROL-MIB
    • CISCO-ENVMON-MIB
    • CISCO-FLASH-MIB
    • CISCO-FTP-CLIENT-MIB
    • CISCO-HSRP-MIB
    • CISCO-HSRP-EXT-MIB
    • CISCO-IGMP-FILTER-MIB
    • CISCO-IMAGE-MIB
    • CISCO-IP-STAT-MIB
    • CISCO-L2L3-INTERFACE-CONFIG-MIB
    • CISCO-POE-EXTENSIONS-MIB
    • CISCO-MAC-NOTIFICATION-MIB
    • CISCO-MEMORY-POOL-MIB
    • CISCO-PAGP-MIB
    • CISCO-PING-MIB
    • CISCO-PROCESS-MIB
    • CISCO-RTTMON-MIB
    • CISCO-STP-EXTENSIONS-MIB
    • CISCO-SYSLOG-MIB
    • CISCO-TCP-MIB
    • CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
    • CISCO-VLAN-MEMBERSHIP-MIB
    • CISCO-VTP-MIB
    • ENTITY-MIB
    • ETHERLIKE-MIB
    • IF-MIB
    • IGMP-MIB
    • IPMROUTE-MIB
    • OLD-CISCO-CHASSIS-MIB
    • OLD-CISCO-FLASH-MIB
    • OLD-CISCO-INTERFACES-MIB
    • OLD-CISCO-IP-MIB
    • OLD-CISCO-SYS-MIB
    • OLD-CISCO-TCP-MIB
    • OLD-CISCO-TS-MIB
    • OSPF-MIB (RFC 1253)
    • PIM-MIB
    • RFC1213-MIB
    • RFC1253-MIB
    • RMON-MIB
    • RMON2-MIB
    • SNMP-FRAMEWORK-MIB
    • SNMP-MPD-MIB
    • SNMP-NOTIFICATION-MIB
    • SNMP-TARGET-MIB
    • SNMPv2-MIB
    • TCP-MIB
    • UDP-MIB

    Standards

    • IEEE 802.1s
    • IEEE 802.1w
    • IEEE 802.1x
    • IEEE 802.3ad
    • IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
    • IEEE 802.1D Spanning Tree Protocol
    • IEEE 802.1p CoS Prioritization
    • IEEE 802.1Q VLAN
    • IEEE 802.3 10BASE-T specification
    • IEEE 802.3u 100BASE-TX specification
    • IEEE 802.3ab 1000BASE-T specification
    • IEEE 802.3z 1000BASE-X specification
    • 1000BASE-SX
    • 1000BASE-LX/LH
    • 10GBASE-SR
    • 10GBASE-LRM
    • 10GBASE-CX4
    • 10GBASE-LX4
    • 10GBASE-LR
    • RMON I and II standards
    • SNMPv1, SNMPv2c, and SNMPv3

     

    Table 4. Safety and Compliance

     

     

    Description

    Specification

    Safety certifications

    • UL/CUL Recognition to UL/CSA 60950-1
    • TUV Bauart to EN 60950-1
    • CB report and certificate to IEC 60950-1 with all country deviations
    • CE Marking

    Electromagnetic compatibility certifications

    • FCC Part 15 Class A
    • EN 55022 Class A (CISPR22 Class A)
    • VCCI Class A
    • AS/NZS 3548 Class A or AS/NZS CISPR22 Class A
    • MIC Class A
    • CE Marking

    Telecommunications

    CLEI code

    Warranty

    90 days

     

    Ordering Information

    Table 5 lists ordering information.

    Table 5. Ordering Information

     

     

    Part Number

    Description

    Switches

    WS-CBS3120G-S

    Cisco Catalyst Blade Switch 3120G for HP w/ IP Base

    WS-CBS3120X-S

    Cisco Catalyst Blade Switch 3120X for HP w/ IP Base

    Upgrade Licenses

    3120-IPS-LIC

    Software Upgrade License for Cisco Catalyst Blade Switch 3120 to IP Services

    SFP Modules

    GLC-LH-SM=

    Gigabit Ethernet SFP, LC connector, long-wavelength / long-haul transceiver (single mode)

    GLC-T=

    Gigabit Ethernet SFP, RJ45 based Copper

    GLC-SX-MM=

    Gigabit Ethernet SFP, LC connector, short-wavelength transceiver (multimode)

    X2 and TwinGig Converter Modules

    CVR-X2SFP

    TwinGig Converter Module

    X2-10GB-CX4=

    10GBASE-CX4 X2 Module

    X2-10GB-SR=

    10GBASE-SR X2 Module

    X2-10GB-LRM=

    10GBASE-LRM X2 Module

    X2-10GB-LX4=

    10GBASE-LX4 X2 Module

    X2-10GB-LR=

    10GBASE-LR X2 Module

    Cisco SMARTnet® Options

    CON-SNT-CBS3120G

    Cisco SMARTnet with 8x5 next business day (NBD) hardware advance replacement

    CON-SNTE-CBS3120G

    Cisco SMARTnet with 8x5 4-hour hardware advance replacement

    CON-SNTP-CBS3120G

    Cisco SMARTnet with 24x7 4-hour hardware advance replacement

    CON-S2P-CBS3120G

    Cisco SMARTnet with 24x7 2-hour hardware advance replacement

    CON-SNT-CBS3120X

    Cisco SMARTnet with 8x5 next business day (NBD) hardware advance replacement

    CON-SNTE-CBS3120X

    Cisco SMARTnet with 8x5 4-hour hardware advance replacement

    CON-SNTP-CBS3120X

    Cisco SMARTnet with 24x7 4-hour hardware advance replacement

    CON-S2P-CBS3120X

    Cisco SMARTnet with 24x7 2-hour hardware advance replacement

     

    Note: There are two additional switch part numbers: WS-CBS3125G-S and WS-CBS3125X-S. WS-CBS3125G-S is the same product as WS-CBS3120G-S, and WS-CBS3125X-S is the same product as WS-CBS3120X-S. These switches also have corresponding upgrade licenses and Cisco SMARTnet options.

    Service and Support

    Cisco is committed to reducing TCO and offers technical support services to help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date system software. Table 6 describes service and support that is available directly from Cisco and through resellers.

    Table 6. Service and Support

     

     

    Technical Support Service

    Features

    Benefits

    Cisco SMARTnet Service

    • Access to Cisco IOS Software updates
    • Web access to technical support tools and repositories
    • 24-hour telephone support through the Cisco Technical Assistance Center (TAC)
    • Advance replacement of hardware
    • Minimizes network downtime through reliable day-to-day support and prompt resolution of critical network issues
    • Lowers TCO by using Cisco networking expertise and knowledge
    • Protects your network investment through Cisco IOS Software updates that provide patches and new functions

    Additional Information

    SKU WS-CBS3120G-S-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-blade-switch-3120-hp/data_sheet_c78-439133.html
    Condition Refresh
    Switch Series Cisco Blade Switches
    Device Type Fixed
    Power Rating N/A
    Number of Access Ports 8
    Access Port Speed 1 Gbps
    Number of Uplink Ports None
    Uplink Ports Speed Not Available
    PoE Ports Non PoE
    Rack Mountable Yes
    Stackable No

    WS-CBS3120G-S-RF

    AED

    AED 0

    0