WS-X45-SUP6-E-RF

Double click on above image to view full picture

Zoom Out
Zoom In

WS-X45-SUP6-E-RF

Description:

Cisco Refurbished
Original Part No : WS-X45-SUP6-E=

Cat4500 E-Series Sup 6E, 2x10GE(X2)w/Twin Gig REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 21995

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    Overview

    The Cisco ® Catalyst ® 4500 Supervisor Engine 6-E with CenterFlex technology is an intelligent, high-performance, next-generation extension to the Cisco Catalyst 4500 Series optimized for customers deploying business-critical applications (Figure 1). Cisco developed application-specific integrated circuits (ASICs) specific to the Supervisor Engine 6-E that enable CenterFlex technology and deliver industry-leading centralized performance and configuration flexibility. CenterFlex technology enables granular optimization of real-time voice, video, and data communications to help ensure workforce productivity and profitability and customer success for organizations of all sizes.

    Figure 1. Cisco Catalyst 4500 Supervisor Engine 6-E

    Cisco Catalyst 4500 Supervisor Engine 6-E with CenterFlex Technology Feature Highlights

    Centralized

    • Centralized 320-Gbps switching capacity with 250 Mpps of throughput

    • IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks

    • Dual 10 Gigabit Ethernet uplinks (X2 optics)

    • Hardware forwarding entries: 256,000

    • Quality-of-service (QoS) services hardware entries: 64,000

    • Security services entries: 64,000

    • Low latency

    Flexible

    • Flexibility to operate at 6 or 24 Gbps per line-card slot

    • Ability to mix and match 6-Gbps classic and 24-Gbps E-Series line cards, with no performance degradation

    • Twin gigabit converter modules that enable flexibility for up to 4 Gigabit Ethernet (Small Form-Factor Pluggable [SFP]) uplinks in the X2 optic slots

    • Dynamic hardware forwarding table allocations for ease of IPv4-to-IPv6 migration

    • Advanced QoS support with up to 8 queues per port, dynamic queue sizing, and hierarchical policing to provide flexibility and control

    • Enhanced security with Unicast Reverse Path Forwarding (URPF) for added protection against network spoofing attacks

    • File allocation table (FAT)-based file system for easier network administration

    The Cisco Catalyst 4500 Supervisor Engine 6-E is compatible with classic Cisco Catalyst 4500 line cards, chassis, and power supplies, providing full investment protection. The Supervisor Engine 6-E delivers 24 Gbps per slot of switching capacity when deployed with the E-Series line cards in a Cisco Catalyst 4500 E-Series chassis. You can mix and match classic line cards and E-Series line cards within a Cisco Catalyst 4500 E-Series chassis with no performance degradation. When you deploy the Cisco Catalyst Supervisor Engine 6-E with classic line cards, all of the new features except the 24-Gbps per-slot switching capacity are inherited.
    The Cisco Catalyst Supervisor Engine 6-E also provides flexibility and an easy migration path to 10 Gigabit Ethernet uplinks with dual-purpose X2 slots that can accommodate wire-speed 10 Gigabit Ethernet optics or Cisco Twin Gigabit Converter modules (Figure 2), enabling Gigabit Ethernet SFP optics.
    The Cisco Twin Gigabit Converter Module, which ships standard with the Supervisor Engine 6-E (unless you order 10 Gigabit Ethernet optics on the configuration tool), converts a single 10 Gigabit Ethernet X2 interface into two Gigabit Ethernet port slots that can be populated with appropriate SFP optics, providing a total of 4 Gigabit Ethernet uplinks if used in both X2 interface slots. With the flexibility offered by the Cisco Twin Gigabit Converter Module, you can initially use the gigabit uplinks and then, as your business demands change, you can simply remove the Cisco Twin Gigabit Converter Module and insert 10 Gigabit Ethernet X2 optics to provide full line-rate 10 Gigabit Ethernet uplinks without having to upgrade. The ability to support both Gigabit Ethernet uplinks and 10 Gigabit Ethernet uplinks on a single supervisor engine further demonstrates the flexibility and the investment protection of the Cisco Catalyst 4500 Series.

    Figure 2. Cisco Twin Gigabit Converter Module: Converting 10 Gigabit Ethernet X2 Interface Into Two Gigabit Ethernet SFP Interfaces

    The increased capabilities and investment protection provided by the Supervisor Engine 6-E and CenterFlex technology facilitates not only scalability for today's network requirements but also investment protection by providing significant hardware resources for future growth.

    Predictable Performance and Scalability

    The Supervisor Engine 6-E provides a fourfold increase in per-slot switching capacity from previous-generation Cisco Catalyst 4500 supervisor engines: from 6 to 24 Gbps per slot. Table 1 highlights the performance and scalability enhancements of the Cisco Catalyst 4500 Supervisor Engine 6-E.

    Table 1. Cisco Catalyst 4500 Supervisor Engine 6-E Performance and Scalability Features

     

     

    Feature and Description

    Supervisor Engine 6-E

    Centralized switching capacity

    320 Gbps

    Per-slot switching capacity

    24 Gbps

    Throughput

    250 Mpps for IPv4

    125 Mpps for IPv6

    250 Mpps for L2 Bridging

    IPv4 Routing entries

    256,000

    IPv6 Routing entries

    128,000

    Multicast routes

    32,000

    CPU

    1.3 GHz

    CPU queues

    64

    Synchronous Dynamic RAM (SDRAM)

    512 MB upgradable to 1 GB

    Nonvolatile RAM (NVRAM)

    No through Boot flash (64 MB)

    Security and QoS hardware entries

    128,000

    Cisco Network Admission Control (NAC) and Dynamic Host Configuration Protocol (DHCP) Snooping entries

    12,000

    MAC addresses

    55,000

    Active VLANs

    4096

    Spanning Tree Protocol instances

    10,000

    Switched virtual interfaces (SVIs)

    4096

    Switched Port Analyzer (SPAN)

    Maximum of 8 sessions: ingress and or egress

     

    The Supervisor Engine 6-E is also optimized for multimedia applications with its advanced multicast support offered by features such as Protocol Independent Multicast (PIM) and Source-Specific Multicast (SSM), giving your network additional scalability to support multimedia applications.

    Chassis and Line-Card Support

    Already-installed Cisco Catalyst 4500 chassis with classic line cards can take advantage of the new features and functions of the Supervisor Engine 6-E on all ports with a simple supervisor engine upgrade. However, to take advantage of the increased switching capacity of 24 Gbps per slot, the Cisco Catalyst 4500 E-Series chassis and E-Series line cards are required. You can mix and match Cisco Catalyst 4500 E-Series line cards and classic line cards in an E-Series chassis with no performance degradation to either line card type. Table 2 shows the supervisor engine and line-card slot-assignment options in the Cisco Catalyst 4500 E-Series chassis.

    Table 2. Cisco Catalyst 4500-E Chassis Slot-Assignment Options

     

     

    Chassis

    Single Supervisor Engine 6-E Slot Assignments

    Redundant Supervisor Engine 6-E Slot Assignments

    E-Series Line-Card Slot Options

    Classic Line-Card Slot Options

    Cisco Catalyst 4503-E

    Slot 1

    -

    Slots 2 and 3

    Slots 2 and 3

    Cisco Catalyst 4506-E

    Slot 1

    -

    Slots 2 through 6

    Slots 2 through 6

    Cisco Catalyst 4507R+E

    Slot 3 or 4

    Slots 3 or 4

    Slots 1, 2, and 5 to 7

    Slots 1, 2, and 5 to 7

    Cisco Catalyst 4510R+E

    Slots 5 or 6

    Slots 5 or 6

    Slots 1 to 4, and 7

    Slots 1 to 4, and 7 to 10

    Cisco Catalyst 4507R-E

    Slot 3 or 4

    Slots 3 or 4

    Slots 1, 2, and 5 to 7

    Slots 1, 2, and 5 to 7

    Cisco Catalyst 4510R-E

    Slots 5 or 6

    Slots 5 or 6

    Slots 1 to 4 and 7 (Refer to Note.)

    Slots 1 to 4 and 7 to 10

     

    Note: The Cisco Catalyst 4510R-E supports only classic line cards in slots 8 to 10 with Supervisor Engine 6-E.

    Table 3 summarizes the performance capacities of the Supervisor Engine 6-E on a per-chassis basis.

    Table 3. Cisco Catalyst 4500 Supervisor Engine 6-E Bandwidth Capacity per Chassis

     

     

     

    Cisco Catalyst 4503-E Chassis

    Cisco Catalyst 4506-E Chassis

    Cisco Catalyst 4507R-E and 4507R+E Chassis

    Cisco Catalyst 4510R-E and 4510R+E Chassis

    Supervisor Engine 6-E (WS-X45-Sup6-E)

    136 Gbps

    280 Gbps

    280 Gbps

    320 Gbps

     

    High Availability and Uplinks

    The Cisco Catalyst 4500 Series was designed for nonstop communications with uninterrupted hardware switching. In addition to redundant power supplies, fans, and clock modules, the Cisco Catalyst 4510R-E, 4510R+E, 4507R+E, and 4507R-E chassis models support 1 + 1 supervisor engine redundancy, using the Supervisor Engine 6-E. The primary supervisor engine is active and is responsible for normal system operation. The other supervisor engine serves as a secondary standby, monitoring the operation of the primary supervisor engine.
    Alerts are generated to the network monitoring software if either of the redundant supervisors fails. Hot-swapping of supervisor engines is supported without disrupting system operation. You can configure software to force switchover of supervisor engines, or you can use the Simple Network Management Protocol (SNMP) to perform switchover. The resiliency features of the Cisco Catalyst 4500 prevent network outages that could result in lost business and revenue.
    Nonstop Forwarding with Stateful Switchover (NSF/SSO) offers continuous packet forwarding during supervisor engine switchover. Information is fully synchronized between supervisor engines to allow the standby supervisor engine to immediately take over in subsecond time if the primary fails. In-Service Software Upgrade (ISSU) allows you to upgrade or downgrade complete Cisco IOS ®Software images with minimal to no network disruption when using a redundant Cisco Catalyst 4500 E-Series system with dual supervisor engines. Facilitating rapid, undisruptive software upgrade for new line cards, new power supplies, new features, or bug fixes, ISSU offers continuous packet forwarding during the supervisor engine switchover running different Cisco IOS Software releases.
    NSF/SSO and ISSU dramatically improve the network reliability and availability in a Layer 2 or Layer 3 environment. NSF/SSO and ISSU are essential for business-critical applications such as voice over IP (VoIP). These features help ensure that VoIP calls are not dropped.
    Table 4 shows the high-availability and uplink options for the Supervisor Engine 6-E.

    Table 4. Supervisor Engine 6-E High Availability and Uplink Options

     

     

    Feature and Description

    Supervisor Engine 6-E

    Redundant-capable

    • Yes
    • Cisco Catalyst 4507R, 4507R-E, and 4507R+E models
    • Cisco Catalyst 4510R, 4510R-E, and 4510R+E models

    Active supervisor engine uplinks in redundant mode

    • Two 10 Gigabit Ethernet (wire-speed)

    or

    • Four 10 Gigabit Ethernet (2:1 oversubscribed)

    or

    • Four Gigabit Ethernet (Cisco Twin Gig Converter Module)

    or

    • Eight Gigabit Ethernet (Cisco Twin Gig Converter Module)*

    Active supervisor engine uplinks (nonredundant mode)

    • Two 10 Gigabit Ethernet

    or

    • Four Gigabit Ethernet (Cisco Twin Gig Converter Module)

    Uplink optic types

    SFP (Gigabit Ethernet) with Cisco Twin Gig Converter Module or X2 optics (10 Gigabit Ethernet ports)

    SSO/NSF and ISSU

    Yes

     

    Please refer to the "Features at a Glance" section of this data sheet for a complete listing of supported features.

    IPv6 Support

    IPv6 is important for the future of IP networking and is critical for the expansion of IP address space in the future. IPv6 capability is required by many companies and is being mandated by governments worldwide. This protocol has been supported on the Cisco Catalyst 4500 Supervisor Engine II-Plus to V-10GE engines since Cisco IOS Software Release 12.2(20)EW with software forwarding. The Cisco Catalyst 4500 Supervisor Engine 6-E supports IPv6 Unicast and Multicast in hardware for full line-rate forwarding performance of up to 125 Mpps. The Supervisor Engine 6-E also dynamically allocates hardware table space between IPv4 and IPv6 routes to maximize table-space usage for optimal IPv4-to-IPv6 migration. The Supervisor Engine 6-E supports Multicast Listener Discovery (MLD) Snooping for IPv6, enhancing performance and reducing network traffic by allowing a switch to dynamically add and remove hosts from a multicast group.
    Table 5 highlights the IPv6 capabilities of the Supervisor Engine 6-E.

    Table 5. Summary of Supervisor Engine 6-E IPv6 Capabilities

     

     

    Feature and Description

    Supervisor Engine 6-E

    IPv6 support

    Unicast and Multicast forwarding done in hardware

    IPv6 performance

    125 Mpps

    IPv6 Routing entries

    128,000

    Dynamic Hardware Route Table allocations

    Yes

    MLD Snooping for IPv6

    Yes, in hardware

    URPFv6: Strict mode

    Yes, in hardware

     

    Please refer to the "Features at a Glance" section of this data sheet for a complete listing of supported features.
    For more information about IPv6 feature support and configuration, please refer to the Cisco Catalyst 4500 with Cisco IOS Software Release 12.2(40)SG release notes at http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_release_notes_list.html and the Cisco IOS Software configuration library athttp://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00807fcf4b.html.

    Intelligent Network Services with QoS and Sophisticated Traffic Management

    The Cisco Catalyst 4500 Supervisor Engine 6-E provides enhanced QoS features to help ensure that network traffic is classified, prioritized, and scheduled optimally to efficiently deploy a unified communications network that comprises bandwidth-hungry multimedia, time-sensitive (voice), and mission-critical applications. This type of network allows the administrator to differentiate between traffic flows and enforce policies. QoS capabilities include sharing, shaping, and strict-priority configurations for optimal scheduling of egress traffic as well as Dynamic Buffer Limiting (DBL), a flow-based congestion-avoidance feature. The Supervisor Engine 6-E extends the capabilities of previous-generation supervisor engines by providing flexible queuing with up to 8 transmit queues per port with dynamic queue sizing for greater flexibility in classifying and prioritizing traffic. Classification has also been enhanced by providing configurable classification mapping tables applied on a per-port basis, providing greater flexibility in marking traffic. Policing has also been enhanced to include 2-Rate, 3-Color Policing for more granular control and enforcement of traffic policies. Table 6 summarizes the enhanced QoS features of the Supervisor Engine 6-E.

    Table 6. Summary of Supervisor Engine 6-E Enhanced QoS Features

     

     

    Feature and Description

    Supervisor Engine 6-E

    QoS hardware entries

    64,000

    Policers

    16,000 with flexible assignment for input/output

    Hierarchical policies

    Yes: 2-Rate, 3-Color

    Number of Tx queues

    Flex queues up to 8

    Maximum Tx queue size

    Dynamic 16 to 8184 packets per queue, depending on the number and type of line card and the number of queues configured on the port (refer to documentation for more details)

    Dynamic queue sizes

    Yes

    Configurable classification mapping tables

    Yes

    Match IP on MAC Header

    Yes

    Modular QoS-compliant

    Yes

    DBL: Congestion-avoidance feature

    Yes

    QoS sharing

    Supported on all ports

    Shaping

    Yes, per Tx queue

    Broadcast suppression

    Supported in hardware for all ports

    Multicast suppression

    Supported in hardware for all ports

     

    Please refer to the "Features at a Glance" section of this data sheet for a complete listing of supported features.

    Comprehensive Security with Cisco TrustSec

    The Cisco Catalyst 4500E Supervisor Engine 6-E is a validated component of the Cisco TrustSec ® 2.1 architecture. This allows the Cisco Catalyst 4500E Supervisor Engine 6-E to be transparently integrated into campus switching environments for a comprehensive security solution based on Cisco TrustSec. The Cisco Catalyst Supervisor Engine 6-E is a foundational element of the Cisco TrustSec architecture with support for the following functionalities:

    • Device sensor: The device sensor on the Cisco Catalyst 4500E Supervisor Engine 6-E enables the ability to recognize the devices connected to the switch. This feature also interoperates with the Cisco Identity Services Engine, providing for a centralized view of all devices' access to the network in a scalable manner. When combined with AutoSmartPorts (ASP), it also provides the ability to dynamically apply policies on the switch based on the device type. For more information, visithttp://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_aaa/configuration/15-1sg/sec-dev-sensor.html.

    • Identity-based networking: The Cisco Catalyst 4500E Supervisor Engine 6-E has the most rich and robust set of IEEE 802.1X based identity features to provide the right level of authenticated access to users. It also simplifies identity deployments with features such as Flexible Authentication, WebAuth, and MAC Authentication Bypass (MAB), as well as open mode for undisrupted operations while providing visibility of network access. The identity features also provide integrated support for IP telephony. It also provides for flexible authorization policies with VLAN assignment and dynamic ACLs.

    For more information, visit:http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1/XE_330SG/configuration/guide/dot1x.html
    http://www.cisco.com/go/trustsec

    Simplified and Scalable Network Virtualization with Easy Virtual Network (EVN)

    Enterprise networks use single foundational infrastructure to build multiple logical overlay networks for diversified closed usergroups, regulatory, secure IT applications, etc. On campuses the traditional Multi-VRF solution is widely adopted and deployed to solve such network segmentation challenges. The Cisco Catalyst 4500E Series platform simplifies virtual network operation and maximizes scalability with the Cisco campus end-to-end Easy Virtual Network (EVN) technology.

    Figure 3. Simplified Campus Network Virtualization with Cisco EVN

    Cisco EVN is a successor solution that offers numerous advantages over traditional Multi-VRF technology:

    • Simplified: To simplify campus virtual-network solutions, the Cisco EVN is designed with following three major components:

    – Virtual network (VNET) trunk: The Cisco EVN solution reduces 98 to 99 percent of configuration complexities.

    – Route replication: A simplified unicast and multicast route-leaking capability enables shared network and application services to virtual-network users. It replaces traditional Border Gateway Protocol (BGP)-based route-leaking mechanics.

    – Routing context: Simplified and optimized virtual-network operation and troubleshooting are supported on a per-VRF basis.

    • Scalable: Cisco EVN enables flexibility to scale up to 32 virtual network solutions - operationally 4x virtual-network scalability capacity over Multi-VRF technology.

    • Interoperable: Cisco EVN provides network topology isolation based on an RFC-defined control plane; for example, Enhanced IGRP (EIGRP), Open Shortest Path First (OSPF), Multicast etc. The data-plane security and protection are maintained through industry-standard IEEE 802.1Q. In addition, the Cisco EVN-supported system interoperates with peer Cisco EVN, Multi-VRF, and MPLS systems.

    Comprehensive Centralized Management

    The Cisco Catalyst Supervisor Engine 6-E features a single console port and a single IP address to manage all system features. Remote in-band management is available with SNMP, Telnet client, BOOTP, and Trivial File Transfer Protocol (TFTP). Support for local or remote out-of-band management is delivered through a terminal or modem attached to the console interface. USB drive support will be provided in a future software release. The Cisco Smartports macro for Cisco Catalyst switches is also supported, simplifying the configuration of the critical features for Ethernet networks.
    The Cisco Catalyst 4500 Supervisor Engine 6-E is also FAT file system-capable, allowing images to be copied, saved, etc. with Windows-based machines with a Compact Flash. This capability will be available in a future software release.

    Table 7. Key Supervisor Engine 6-E Management Features

     

     

    Feature and Description

    Supervisor Engine 6-E

    USB drive support

    Yes, future software release

    Compact Flash support

    Yes, 64- and 128-MB options

    FAT file system support

    Yes

    SPAN

    Up to 8 sessions: ingress and egress

     

    Please refer to the "Features at a Glance" section of this data sheet for a complete listing of supported features.
    The Cisco Catalyst 4500 Supervisor Engine 6-E also delivers a comprehensive set of management tools to provide the required visibility and control in the network. Managed with CiscoWorks solutions, Cisco Catalyst switches can be configured and managed to deliver end-to-end device, VLAN, traffic, and policy management. The CiscoWorks LAN Management Solution (LMS) bundle offers tools such as CiscoWorks Resource Manager Essentials and CiscoView. These Web-based management tools offer several services, including automated inventory collection, software deployment, easy tracking of network changes, views into device availability, and quick isolation of error conditions.

    Lower Total Cost of Ownership and Ease of Use with Smart Install Director

    Smart Install Director simplifies management of images and configurations for enterprise switches in campus and branch networks. The Cisco Catalyst 4500E, now acting as Smart Install Director, provides a single management point for images and configuration of directly or indirectly connected Cisco Catalyst 2960, 3560, 3750, and 3850 Series Switches. It provides for:

    • Plug and play in switch deployment

    • Zero-touch replacement of switches with the same configuration and image as the switch it is replacing

    • Single point of image and configuration management, in which configuration and image management are centralized

    • On-demand image and configuration updates across all downstream switches from a single touchpoint

    Smart Install Director reduces the customer's TCO and operational expense, while providing ease of use to the user.

    Advanced Security

    The Cisco Catalyst 4500 Supervisor Engine 6-E extends the rich set of industry-leading, integrated security features (Table 8) to proactively lock down a critical network infrastructure by supporting URPF in hardware. URPF helps prevents traffic spoofing by identifying traffic coming in on an unexpected port. The Cisco Catalyst 4500 Supervisor Engine 6-E also reduces network security risks with a rich set of Cisco NAC capabilities and 802.1X-based user authentication, authorization, and accounting (AAA). The security policy enforcement is uncompromised with the wire-rate, dedicated access control lists (ACLs) to fend off ever-increasing virus and security attacks. The Cisco Catalyst 4500 Supervisor Engine 6-E offers powerful, easy-to-use tools to effectively prevent untraceable man-in-the-middle attacks, control-plane resource exhaustion, IP spoofing, and flooding attacks, without any change to the end-user or host configurations. Secure remote access, file transfers, and network management are accomplished with the Secure Shell (SSH Versions 1 and 2) Protocol, Secure Copy Protocol (SCP), and SNMPv3, respectively.

    Table 8. Supervisor Engine 6-E Security Features

     

     

    Feature and Description

    Supervisor Engine 6-E

    Security hardware entries

    64,000

    Cisco NAC and DHCP Snooping entries

    12,000

    URPF

    Yes, supported in hardware

    802.1X

    Yes

    802.1X extensions

    Yes

    IP Source Guard, Dynamic ARP Inspection (DAI), and DHCP Snooping

    Yes

    Cisco NAC

    Yes

     

    Please refer to the "Features at a Glance" section of this data sheet for a complete listing of supported features.

    Features at a Glance

    For a comprehensive list of features, please visit Cisco Feature Navigator at http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.

    Layer 2 Features

    • Layer 2 hardware forwarding at 250 Mpps

    • Layer 2 switch ports and VLAN trunks

    • IEEE 802. 1Q VLAN Encapsulation

    • Dynamic Trunking Protocol (DTP)

    • VLAN Trunking Protocol (VTP) and VTP domains

    • VTP Pruning

    • Port Security on trunk port

    • Port Security on Private VLAN

    • Port Security on Voice VLAN

    • QinQ Passthrough

    • Support for 4096 VLANs per switch

    • Per-VLAN Spanning Tree Plus (PVST+) and Per-VLAN Rapid Spanning Tree (PVRST)

    • Spanning Tree PortFast and PortFast Guard

    • Spanning Tree UplinkFast and BackboneFast

    • 802.1s

    • 802.1w

    • 802.3ad

    • 802.3af (Power over Ethernet [PoE])

    • Spanning Tree Root Guard

    • Cisco Discovery Protocol

    • Internet Group Management Protocol (IGMP) Snooping v1, v2, and v3

    • IPv6 MLD Snooping v1 and v2

    • Cisco EtherChannel technology, Cisco Fast EtherChannel technology, and Cisco Gigabit EtherChannel technology across line cards

    • Port Aggregation Protocol (PAgP)

    • Link Aggregation Control Protocol (LACP)

    • IGMP Querier

    • IGMP Fast Leave

    • VMPS client

    • Unidirectional Link Detection (UDLD) and aggressive UDLD

    • Voice VLAN and VLAN ID (VVID)

    • Jumbo Frames (up to 9216 bytes)

    • Baby Giants (up to 1600 bytes)

    • Traffic Storm Control (formally known as Broadcast/Multicast Suppression)

    • Forced 10/100 Autonegotiation

    • Bridge Protocol Data Unit (BPDU) Guard

    • Link Layer Discovery Protocol (LLDP)

    Layer 3 Features

    • Hardware-based IP Cisco Express Forwarding routing at 250 Mpps

    • IP routing protocols: Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF), Routing Information Protocol (RIP), and RIPv2

    • Static Routing

    • Inter-VLAN Routing

    • Border Gateway Protocol Version 4 (BGPv4) and Multicast Border Gateway Protocol (MBGP): Q1CY'08 Release

    • Virtual Route Forwarding Lite (VRF-Lite)

    • Software-based generic routing encapsulation (GRE) tunneling

    • IGMP Filtering on access and trunk ports

    • IP Multicast routing protocols: Protocol Independent Multicast (PIM), SSM, and Distance Vector Multicast Routing Protocol (DVMRP)

    • Pragmatic General Multicast Source Discovery Protocol (MSDP)

    • Internet Control Message Protocol (ICMP)

    • ICMP Router Discovery Protocol

    • DHCP Server

    • Per-port Multicast Suppression

    • IP Service-Level Agreement (SLA): Q1 CY'08 Release

    IPv6 Support in Hardware

    • IPv6 Unicast and Multicast Forwarding (done in hardware)

    • IPv6 route entries: 128,000

    • IPv6 addressing architecture

    • IPv6: Cisco Discovery Protocol IPv6 address family

    • IPv6: Cisco Express Forwarding in hardware

    • IPv6: Domain Name System (DNS) resolver for AAAA over an IPv4 and IPv6 transport

    • IPv6: DNS resolver for AAAA over an IPv6 transport

    • IPv6: Extended ACL

    • IPv6: ICMP Rate Limiting

    • IPv6: ICMPv6

    • IPv6: ICMPv6 Redirect

    • IPv6: IP MIB

    • IPv6 over IEEE 802.1Q

    • IPv6: IPv6 over IPv4 GRE tunnel (tunnel support in software)

    • IPv6: Loopback

    • IPv6: Multicast Forwarding Information Base (MFIB) for IPv6

    • IPv6: MLDv1 and v2

    • IPv6: Maximum Transmission Unit (MTU) Path Discovery for IPv6

    • IPv6: Multicast in IPv6 tunnel

    • IPv6: OSPFv3

    • IPv6: EIGRP for IPv6

    • IPv6: Ping

    • IPv6: Router Alert Option

    • IPv6: SSH over an IPv6 Transport

    • IPv6: Stateless Autoconfiguration

    • IPv6: Static routes within IPv6

    • IPv6: AAA

    • IPv6: Telnet

    • IPv6: TFTP

    • IPv6: Traceroute

    • IPv6: Duplicate Address Detection

    • IPv6: Standard ACL

    • IPv6: Tunnels in software

    • IPv6: Hop-by-hop option header: Done in software

    • IPv6: RIP next generation for IPv6

    • IPv6: URPF strict mode

    • PIMv6 (Sparse Mode)

    • BGP: Q1CY'08 Release

    High Availability Features

    • NSF/SSO: Q1CY'08 Release

    • Full-image ISSU: Q1CY'08 Release

    • NSF awareness

    • Hot Standby Router Protocol (HSRP)

    • SSO-Aware Hot Standby Router Protocol

    • Virtual Router Redundancy Protocol (VRRP)

    • Gateway Load Balancing Protocol (GLBP)

    Sophisticated QoS and Traffic Management

    • Modular QoS CLI (MQC)

    • Per-port, per-VLAN QoS

    • Eight queues per port

    • Dynamic Tx Queue Sizing: Q1CY'08 Release

    • Strict Priority Queuing

    • IP differentiated services code point (DSCP)

    • 802.1p: Class of service

    • Flexible Classification Marking

    • Classification and marking based on full Layer 3 and Layer 4 headers

    • Input and output policing based on Layer 3 and Layer 4 headers

    • Support for 16,000 policers with flexible assignment for input and output

    • 2-Rate, 3-Color Policing

    • Shaping and sharing output queue management

    • DBL: Congestion-avoidance feature

    • Auto-QoS command-line interface (CLI) for VoIP deployments

    • Table Map Support

    Predictable Performance

    • 320-Gbps switching fabric

    • Layer 2 hardware forwarding at 250 Mpps

    • Layer 3 hardware-based IP Cisco Express Forwarding routing at 250 Mpps

    • Layer 4 TCP/User Datagram Protocol (UDP) hardware-based filtering at 250 Mpps

    • No performance penalty with advanced Layer 3 and Layer 4 services enabled

    • Software-based learning at a sustained rate of 10,000 hosts per second

    • Support for 55,000 unicast MAC addresses

    • Support for 16,000 multicast MAC addresses

    • Support for 256,000 entries in routing table (shared between unicast and multicast)

    • Scalability to 4,096 virtual ports (VLAN port instances)

    • Bandwidth aggregation up to 16 Gbps through Cisco Gigabit EtherChannel technology

    • Bandwidth aggregation up to 160 Gbps for 10 Gigabit Ethernet through 10 Gigabit Ethernet Cisco EtherChannel technology

    • Hardware-based multicast management

    • Hardware-based ACLs

    Comprehensive Management

    • Single console port and single IP address to manage all system features

    • Software configuration management, including local and remote storage

    • Optional Compact Flash memory card to store software images for backup and easy software upgrades

    • USB drive support: Future software release

    • FAT file system support

    • Manageable through CiscoWorks Windows network-management software on a per-port and per-switch basis, providing a common management interface for Cisco routers, switches, and hubs

    • SNMP v1, v2, and v3 instrumentation, delivering comprehensive in-band management

    • CLI-based management console to provide detailed out-of-band management

    • Remote Monitoring (RMON) software agent to support four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis

    • Analysis support, including ingress port, egress port, and VLAN SPAN

    • Layer 2 Traceroute

    • Remote SPAN (RSPAN): Q1 CY'08 Release

    • Cisco Smartports macros

    • SPAN ACL filtering

    • DHCP Client Autoconfiguration

    • Enhanced SNMP MIB support

    • Network Timing Protocol (NTP)

    Advanced Security

    • TACACS+ and RADIUS, which enable centralized control of the switch and restrict unauthorized users from altering the configuration

    • Standard and extended ACLs on all ports

    • 802. 1x user authentication (with port security)

    • 802.1x with VLAN assignment, voice VLAN: Q1CY`08 Release

    • Router ACLs (RACLs) on all ports (no performance penalty)

    • VLAN ACLs (VACLs)

    • Port ACLs (PACLs)

    • Private VLANs (PVLANs) on access and trunk ports

    • DHCP Snooping and Option 82 insertion

    • Port Security

    • Sticky Port Security on Voice VLAN

    • SSHv1 and v2

    • Unicast Port Flood Blocking

    • DAI

    • IP Source Guard

    • VLAN Management Policy Server (VMPS) client

    • Cisco NAC Layer 2 802.1X

    • Cisco NAC LAN Port IP

    • 802.1X Inaccessible Authentication Bypass

    • Voice VLAN Sticky Port Security

    • SCP

    • URPF Strict Mode (in hardware)

    Technical Specifications

    Management

    • CiscoWorks LMS; includes CiscoWorks Resource Manager Essentials

    • CiscoView

    • SNMP v1, v2, and v3

    • RMON I and II

    • RFC 1213-MIB (MIB II)

    • UDP-MIB

    • TCP-MIB

    • CISCO-FLASH-MIB

    • CISCO-IMAGE-MIB

    • RFC 2233 (IF-MIB)

    • CISCO-CONFIG-MAN-MIB

    • CISCO-MEMORY-POOL

    • CISCO-CDP-MIB

    • RMON-MIB lite (RFC 1757)

    • RMON2-MIB lite (RFC 2021)

    • HC-RMON-MIB

    • SMON-MIB

    • ENTITY-MIB (V1-RFC 2037) (V2- RFC 2737)

    • CISCO-PROCESS-MIB

    • CISCO-CONFIG-COPY-MIB

    • CISCO-ENTITY-EXT-MIB

    • CISCO-ENTITY-ASSET-MIB

    • CISCO-ENTITY-FRU-CONTROL-MIB

    • CISCO-ENTITY-SENSOR-MIB

    • CISCO-ENVMON-MIB

    • BRIDGE-MIB (RFC 1493)

    • CISCO-PAGP-MIB

    • CISCO-PRIVATE-VLAN-MIB

    • CISCO-STP-EXTENSIONS-MIB

    • CISCO-VLAN-MEMBERSHIP-MIB

    • CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB

    • IGMP-MIB

    • PIM-MIB

    • OSPF-MIB

    • CISCO-ENTITY-VENDORTYPE-OID-MIB

    • CISCO-SYSLOG-MIB

    • CISCO-BULK-FILE-MIB

    • CISCO-CLASS-BASED-QOS-MIB

    • CISCO-FTP-CLIENT-MIB

    • CISCO-HSRP-MIB

    • CISCO-IGMP-FILTER-MIB

    • CISCO-IPMROUTE-MIB

    • CISCO-PORT-SECURITY-MIB

    • CISCO-RMON-CONFIG-MIB

    • CISCO-VTP-MIB

    • ETHERLIKE-MIB

    • EXPRESSION-MIB

    • CISCO-PORT-STORM-CONTROL-MIB

    Industry Standards

    • Ethernet: IEEE 802.3 and 10BASE-T

    • Fast Ethernet: IEEE 802.3u, 100BASE-TX, and 100BASE-FX

    • Gigabit Ethernet: IEEE 802.3z and 802.3ab

    • 10 Gigabit Ethernet: IEEE 802.3ae

    • IEEE 802.3af Power over Ethernet (PoE)

    • IEEE 802. 1D Spanning Tree Protocol

    • IEEE 802.1w Rapid Reconfiguration of Spanning Tree

    • IEEE 802. 1s Multiple VLAN Instances of Spanning Tree

    • IEEE 802.3 ad LACP

    • IEEE 802. 1p CoS Prioritization

    • IEEE 802.1Q VLAN

    • IEEE 802. 1X User Authentication

    • 1000BASE-X (GBIC)

    • 1000BASE-X (SFP)

    • 1000BASE-SX

    • 1000BASE-LX/LH

    • 1000BASE-ZX

    • RMON I and II standards

    Supported Cisco Catalyst 4500 E-Series Line Cards and Modules

    • WS-X4648-RJ45V-E: Cisco Catalyst 4500 E-Series, 48-port 802.3af PoE 10/100/1000 (RJ-45)

    • WS-X4648-RJ45V+E: Cisco Catalyst 4500 E-Series, 48-port Premium PoE 10/100/1000 (RJ-45)

    • WS-X4648-RJ45-E: Cisco Catalyst 4500 E-Series, 48-port 10/100/1000 (RJ-45)

    • WS-X4606-X2-E: Cisco Catalyst 4500 E-Series, 6-port 10 Gigabit Ethernet (X2)

    • WS-X4624-SFP-E: Cisco Catalyst 4500 E-Series, 24-port Gigabit Ethernet (SFP)

    • WS-X4612-SFP-E: Cisco Catalyst 4500 E-Series, 12-port Gigabit Ethernet (SFP)

    • CVR-X2-SFP: Twin gigabit converter module

    Supported Cisco Catalyst 4500 Classic Line Cards and Modules

    • WS-X4148-FE-BD-LC: Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-port 100BASE-BX-D SMF (LC)

    • WS-X4124-FX-MT: Cisco Catalyst 4000 Fast Ethernet Switching Module, 24-port 100BASE-FX (MT-RJ)

    • WS-X4148-FX-MT: Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-port 100BASE-FX multimode fiber (MMF)

    • WS-X4124-RJ45: Cisco Catalyst 4500 10/100 Module, 24 ports (RJ-45)

    • WS-X4148-RJ: Cisco Catalyst 4500 10/100 Module, 48 ports (RJ-45)

    • WS-X4148-RJ21: Cisco Catalyst 4500 10/100 Module, 48-port telco (4 x RJ-21)

    • WS-X4248-RJ21V: Cisco Catalyst 4500 PoE 802.3af 10/100, 48 ports (RJ-21)

    • WS-X4224-RJ45V: Cisco Catalyst 4500 PoE 803.3af 10/100, 24 ports (RJ-45)

    • WS-X4248-RJ45V: Cisco Catalyst 4500 PoE 802.3af 10/100, 48 ports (RJ-45)

    • WS-X4248-FE-SFP: Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-port 100BASE-X (SFP)

    • WS-X4232-GB-RJ: Cisco Catalyst 4500 32-Port 10/100 (RJ-45), 2 Gigabit Ethernet (GBIC) modules

    • WS-X4302-GB: Cisco Catalyst 4500 Gigabit Ethernet Module, 2 ports (GBIC)

    • WS-X4306-GB: Cisco Catalyst 4500 Gigabit Ethernet Module, 6 ports (GBIC)

    • WS-X4506-GB-T: Cisco Catalyst 4500 Gigabit Ethernet Module, 6 ports 10/100/1000 802.3af PoE or 1000BASE-X (SFP)

    • WS-X4418-GB: Cisco Catalyst 4500 Gigabit Ethernet Module, server switching 18 ports (GBIC)

    • WS-X4448-GB-SFP: Cisco Catalyst 4500 Gigabit Ethernet Module, 48 ports 1000BASE-X (optional SFPs)

    • WS-X4424-GB-RJ45: Cisco Catalyst 4500 24-Port 10/100/1000 Module (RJ-45)

    • WS-X4448-GB-RJ45: Cisco Catalyst 4500 48-Port 10/100/1000 Module (RJ-45)

    • WS-X4548-GB-RJ45: Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45)

    • WS-X4524-GB-RJ45V: Cisco Catalyst 4500 PoE 802.3af 10/100/1000, 24 ports (RJ-45)

    • WS-X4548-GB-RJ45V: Cisco Catalyst 4500 PoE 802.3af 10/100/1000, 48 ports (RJ-45)

    Supported Pluggables

    • GLC-T: 1000BASE-T SFP

    • GLC-SX-MM: Gigabit Ethernet SFP, LC connector, SX transceiver

    • GLC-LH-SM: Gigabit Ethernet SFP, LC connector, LX/LH transceiver

    • GLC-ZX-SM: 1000BASE-ZX SFP

    • Cisco Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC) solution

    • Cisco CWDM SFP solution

    • X2-10GE-LR: 10GBASE-LR X2 module

    • X2-10GE-CX4: 10GBASE-CX4 X2 module

    • X2-10GE-LX4: 10GBASE-LX4 X2 module

    • X2-10GE-SR: 10GBASE-SR X2 module

    • X2-10GE-ER: 10GBASE-ER X2 module

    X2-10GE-LRM - 10GBASE-LRM X2 module: For a comprehensive list of optical modules and the minimum Cisco IOS Software release required for each of the supported optical modules, visithttp://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.

    Indicator and Port Specifications

    • System status: Green (operational); red (faulty)

    • Switch usage load: 1- to 100-percent aggregate switching usage

    • Console: RJ-45 female

    • Reset (switch recessed protected)

    • Uplinks: Link and active

    • Image management port: 10/100/1000 BASE-TX (RJ-45 female) data terminal equipment (DTE); green (good); orange (disabled); off (not connected)

    Software Requirements

    The Cisco Catalyst 4500 Series Supervisor Engine 6-E is supported only in Cisco IOS Software and is not supported in the Cisco Catalyst Operating System Software. The minimum software version is as follows:

    • Supervisor Engine 6-E, Cisco IOS Software Release 12.2(40)SG or later

    Environmental Conditions

    • Operating temperature: 32 to 104ºF (0 to 40ºC)

    • Storage temperature: -40 to 167ºF (-40 to 75ºC)

    • Relative humidity: 10 to 90 percent, noncondensing

    • Operating altitude: -60 to 2000m

    Power and MTBF Information

    Active supervisor power = 260W
    Standby supervisor power = 185W
    This result is not indicative of the actual power draw during operation. It is the absolute maximum value recommended for facility power and cooling capacity planning. Typical power draw is about 20 percent lower than the maximum value shown.
    MTBF = 160,735 hours

    Regulatory Standards Compliance

    Table 9 shows regulatory standards, and Table 10 shows ordering information.

    Table 9. Cisco Catalyst 4500 Supervisor Engine 6-E Regulatory Standards Compliance

     

     

    Specification

    Standard

    Regulatory compliance

    CE marking

    Safety

    • UL 60950CAN/CSA-C22.2 No. 60950
    • EN 60950
    • IEC 60950
    • TS 001
    • AS/NZS 3260

    EMC

    • FCC Part 15 (CFR 47) Class A
    • ICES-003 Class A
    • EN55022 Class A
    • CISPR22 Class A
    • AS/NZS 3548 Class A
    • VCCI Class A
    • ETS 300 386
    • EN 55022
    • EN 55024
    • EN 61000-6-1
    • EN 50082-1
    • EN 61000-3-2
    • EN 61000-3-3

    Industry EMC, safety, and environmental standards

    • GR-63-Core Network Equipment Building Standards (NEBS) Level 3
    • GR-1089-Core Level 3
    • ETS 300 019 Storage Class 1.1
    • ETS 300 019 Transportation Class 2.3 (pending)
    • ETS 300 019 Stationary Use Class 3.1
    • ETS 300 386

     

    Table 10. Ordering Information

     

     

    Product Number

    Description

    WS-X45-Sup6-E

    Cisco Catalyst 4500 E Series Supervisor Engine 6-E, 2x10GE (X2) or 4x1GE (SFP), Console RJ-45, USB

    WS-X45-Sup6-E/2

    Cisco Catalyst 4500 Redundant Supervisor Engine 6-E, 2x10GE (X2) or 4x1GE (SFP), Console RJ-45, USB

    S45EIPB-12240SG(=)

    Cisco IOS Software for Supervisor Engine 6-E (IP Base image)

    S45EIPBK9-12240SG(=)

    Cisco IOS Software for Supervisor Engine 6-E (IP Base image with 3DES)

    S45EES-12240SG(=)

    Additional Information

    SKU WS-X45-SUP6-E-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/catalyst-4500-supervisor-engine-6-e/product_data_sheet0900aecd806df543.html
    Condition Refresh
    Module Type Supervisor Engine

    WS-X45-SUP6-E-RF

    AED

    AED 0

    0