WS-X6582-2PA-RF

Double click on above image to view full picture

Zoom Out
Zoom In

WS-X6582-2PA-RF

Description:

Cisco Refurbished
Original Part No : WS-X6582-2PA=

Enhanced FlexWAN Module, Fabric-enabled REMANUFACTURED
AED 0

Availability: In stock


Available Quantity: 15000

Delivery Time: 2 to 4 week

  • Add to Compare
  • Details

    The Cisco® 7600 Series/Catalyst® 6500 Series Enhanced FlexWAN module (Enhanced FlexWAN) enables high-performance, intelligent metropolitan-area network (MAN) and WAN services. Enterprises and service providers can take advantage of the many types of the Cisco 7000 Series common port adapters for their WAN aggregation and connectivity options, as well as the increased scalability, performance, and rich quality of service (QoS) features offered by the Cisco Enhanced FlexWAN module.

    Figure 1. The Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN module

    Product Overview

    The Cisco Enhanced FlexWAN module (Figure 1) enables high-performance, intelligent WAN and MAN service scalability for both enterprises and service providers. The Cisco Enhanced FlexWAN module supports a variety of clear-channel and channelized WAN interfaces, including T1/E1, T3/E3, High-Speed Serial Interface (HSSI), T3/E3 ATM, OC-3 ATM, and OC-3 packet over SONET (POS), with the ability to directly interface with high-speed SONET equipment for MANs and WANs.

    The Cisco Enhanced FlexWAN module accepts up to two WAN port adapters commonly used with the Cisco 7200 and 7500 Series Routers, providing an easy migration path for Cisco customers from the Cisco 7500 Series to the Cisco 7600 Series. In addition, the Cisco Enhanced FlexWAN module adds switch fabric connectivity, offers increased performance and memory compared to the existing FlexWAN module, and supports advanced features targeted at Metropolitan (Metro) Ethernet markets. This new innovative architecture is designed to deliver numerous media options and enable scalable, distributed, intelligent network services for the next generation of applications.

    Applications

    WAN, MAN, and LAN Service Convergence

    A hallmark of the Cisco 7600 Series and the Cisco Catalyst 6500 Series is the flexibility to support multiple applications on the same platform, delivering “no-compromise” convergence for a range of applications, including data center, MAN, and WAN edge. The Cisco Enhanced FlexWAN module simplifies network design and deployment by allowing consolidation of LAN, WAN, and MAN interfaces into a single, highly scalable platform. The Cisco 7600 Series and Cisco Catalyst 6500 Series deliver advanced flexibility, supporting any mix of media or traffic within a common system, software, and chassis, thereby easing and simplifying network configuration and installation tasks, and speeding service delivery. Converged data, voice, and video traffic can be transported transparently from end to end across an interconnected LAN, WAN, or MAN, with the ability to manage thousands of simultaneous traffic flows at wire speed with granular QoS and security control.

    WAN Aggregation

    The Cisco Enhanced FlexWAN module enables the Cisco 7600 Series Router and Cisco Catalyst 6500 Series Switch to do high-end WAN aggregation, including that based on point-to-point circuits, Frame Relay, Point-to-Point Protocol (PPP), High-Level Data Link Control (HDLC), ATM, or POS. The rich QoS features and distributed processing attributes of the Cisco Enhanced FlexWAN module make it a cornerstone of a highly scalable WAN aggregation solution. Higher-layer applications can easily be supported on this end-to-end network to allow intelligent data, voice, video, and security services—all on the same platform to provide integrated easy-to-use application delivery and control. Figure 2 illustrates a Cisco 7600 or a Cisco Catalyst 6500 deployed as a head-end router for WAN aggregation.

    Figure 2. WAN Aggregation

    Key Features and Benefits

    The Cisco Enhanced FlexWAN module offers the ability to consolidate LAN, WAN, and MAN services into a single platform and lowers the total cost of ownership of the network through simplified design and ease of network management and maintenance.

    Scalable Bandwidth with Intelligent Network Services for Next-Generation Applications

    The unique value proposition of the Cisco 7600 Series and the Cisco Catalyst 6500 Series is the convergence supported from the physical layer to a highly scalable application layer. These two platforms can scale from 10 Megabit Ethernet to 10 Gigabit Ethernet in the LAN and DS-0 to OC-48/STM-16 in the WAN. Differentiated Services (DiffServ) and IP Precedence priority packet marking along with QoS classification, policing, queuing, intelligent packet discard, and security access control on every port ensure that the platform will meet the demands of any network environment.

    Included in the rich QoS features is the capability to guarantee bandwidth to business-critical applications; limit bandwidth to non-critical applications; drop selective, low-priority packets to avoid congestion; and mark packets to control QoS for any type of traffic flows. In addition, the Cisco Enhanced FlexWAN module supports several key features required for low-speed WAN aggregation, such as compressed Real-Time Protocol (cRTP) and distributed link fragmentation and interleaving (LFI).

    Lower Cost of Ownership

    A major benefit of LAN, WAN, and MAN consolidation on the Cisco 7600 Series and Cisco Catalyst 6500 Series is the reduction in the number of platforms to deploy and manage in any given network. This service convergence not only simplifies network design and configuration, it also decreases rack space and power requirements as well as the training and administrative burden associated with managing many different platforms. Additionally, such integration eases the support burden placed on a maintenance staff because spare parts for multiple platforms do not need to be stocked or managed.

    The Cisco Enhanced FlexWAN module also provides considerable investment protection for the large installed base of Cisco 7200 and 7500 Series Routers. These same WAN port adapters can be deployed on the Cisco 7600 Series and Cisco Catalyst 6500 Series for immediate service delivery and scaling to much higher levels of system performance and bandwidth.

    These benefits directly translate to reduced costs of ownership—reduced capital costs of procurement and reduced ongoing operational costs of network management, such as training, element management, and inventory and configuration management. In addition to requiring fewer platforms to manage, a converged solution from Cisco Systems® provides management of all LAN, WAN, and MAN functions with the same network management tool set, easing the number of management platforms required.

    Table 1.Features and Benefits of Cisco Enhanced FlexWAN Module

     

    FlexWAN

    Enhanced FlexWAN

    Benefit

    CPU

    Medium performance

    High performance

    Targets the granular DS-0 to the high-end OC-3 market

    Number of CPUs

    2 CPUs, one per bay

    2 CPUs, one per bay

    Offers a high-performance, independently scalable solution across the 2-port adapter bays

    Memory default

    Memory upgrade option

    64 MB per bay

    Total 128 MB per FlexWAN module

    128 MB maximum per bay

    256 MB per bay

    Total 512 MB per Enhanced FlexWAN module

    512 MB maximum per bay

    Enables support of large routing tables, rich QoS features, and increased scalability

    Switch fabric connectivity

    No

    Yes

    Enables the use of 256- or 720-Gbps switch fabric modules for data forwarding

    Online insertion and removal (OIR) of module

    Yes

    Yes

    Increases high availability, and provides operational ease of use

    Product Specifications

    Table 2.Product Specifications

    Description

    Specification

    Compatibility

    Cisco Catalyst Supervisor Engine 2 and Supervisor Engine 720 systems

    Minimum software compatibility

    Cisco IOS® Software Release 12.2(17a)SXA or later releases for Supervisor Engine 720; Cisco IOS Software Release 12.2(17a)SXB or later releases for Supervisor Engine 2-based systems

    Protocols

    TCP, IPv4, IPv6, Multiprotocol Label Switching (MPLS), Ethernet over MPLS (EoMPLS), Frame Relay over MPLS (FRoMPLS), ATM over MPLS (ATMoMPLS)

    Encapsulation

    Frame Relay, Multilink Frame Relay—FRF.16, Multilink Point-to-Point Protocol (MLPPP), HDLC, ATM, HSSI, generic routing encapsulation (GRE) (supported on HSSI and Frame Relay interfaces)

    Cards, ports, and slots

    2-port adapter bays per Cisco Enhanced FlexWAN module

    Features and benefits

    Higher performance—Doubles the packet forwarding performance over the previous-generation FlexWAN module
    Switch fabric connectivity—Allows system scalability up to 720 Gbps by offering switch fabric connectivity
    Increased packet memory—Increases the memory to 512 MB per bay, from 128 MB per bay supported in the previous-generation FlexWAN; this enables support of large routing tables, rich QoS features, and increased scalability
    OIR of the Cisco Enhanced FlexWAN module

    QoS, ACLs, and Low-Speed Aggregation Features

    Security

    Standard, extended, dynamic, reflexive, and time-based access control lists (ACLs)

    QoS

    IP Precedence
    Differentiated services code point (DSCP) (IPv6 and IPv4)
    MPLS experimental values (MPLS EXP)

    Congestion avoidance

    Weighted Random Early Detection (WRED)

    Congestion management

    Per-virtual circuit queuing
    Low-latency queuing (LLQ)
    Weighted Fair Queuing (WFQ)
    Class-Based Weighted Fair Queuing (CBWFQ)

    Traffic classification, shaping, and bandwidth policing

    Marking
    Policing
    Distributed traffic shaping (DTS)
    Hierarchical traffic shaping
    Network-based application recognition (NBAR)

    Bandwidth efficiency

    cRTP

    Fragmentation

    Distributed LFI (dLFI)
    Frame Relay Forum FRF.12

    Voice over Frame Relay

    Frame Relay Forum FRF.11

    Bridging

    RFCs 1483 and 2684 ATM Bridging

    ATM permanent-virtual-circuit (PVC) bundles

    Unsupported features

    Frame Relay traffic shaping (FRTS), ISDN, Frame Relay switching, Layer 2 Tunneling Protocol (L2TP), Layer 2 Forwarding (L2F), Point-to-Point Tunneling Protocol (PPTP)
    Frame Relay switched virtual circuits (SVCs)
    Multi-chassis Multilink PPP
    Systems Network Architecture (SNA) serial protocols (Synchronous Data Link Control [SDLC], Frame Relay Access Support [FRAS], binary network node [BNN], and boundary access node [BAN])
    FRF.5, FRF.8, FRF. 9, and FRF.15
    POS channel bonding
    QoS groups

    Memory

    256-MB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) memory per bay
    Optionally upgradable to 512 MB DDR SDRAM memory per bay

    Supported port adapters

    T1/E1

    PA-4T+

    PA-8T-V35

    PA-8T-232

    PA-8T-X21

    PA-MC-2T1

    PA-MC-4T1

    PA-MC-8T1

    PA-MC-8TE1+

    PA-MC-8E1/120

    PA-MC-2E1/120

    PA-4E1G/120

    PA-4E1G/75

     

    T3/E3 and STM-1

    PA-T3+

    PA-E3

    PA-2T3

    PA-2T3+

    PA-2E3

    PA-MC-T3

    PA-MC-2T3+

    PA-MC-E3

    PA-MC-STM-1MM

    PA-MC-STM-1SMI

     

    ATM

    PA-A3-T3

    PA-A3-E3

    PA-A3-OC3MM

    PA-A3-OC3SMI

    PA-A3-OC3SML

    PA-A3-8T1IMA

    PA-A3-8E1IMA

    PA-A6-OC3MM

    PA-A6-OC3SMI

    PA-A6-OC3SML

    PA-A6-T3

    PA-A6-E3

     

    POS and HSSI

    PA-POS-OC3MM

    PA-POS-OC3SMI

    PA-POS-OC3SML

    PA-POS-2OC3MM

    PA-POS-2OC3SMI

    PA-POS-2OC3SML

    HSSI

    PA-H

    PA-2H

    Unsupported port adapters

    Dual-wide adapters, voice, Token Ring, Fiber Distributed Data Interface (FDDI), encryption, compression, Fibre Channel

    Environmental conditions

    Operating temperature: 32 to 104°F (0 to 40°C)
    Storage temperature: –40 to 167°F (–40 to 75°C)
    Relative humidity: 10 to 90%, noncondensing
    Operating altitude: –60 to 2000m

    Reliability and availability

    Mean time between failures: 7 years for system configuration

    MIBs

    Cisco Entity MIB (CISCO-ENTITY-MIB)
    Cisco Entity Asset MIB
    Cisco Entity Field-Replaceable Unit (FRU) Control MIB
    Cisco Entity Alarm MIB
    Interface IF MIB (RFC 2233)
    DS-3 MIB (RFC 1407)
    DS-1 MIB (RFC 1406)
    Frame Relay MIB (RFC 1315)
    Cisco Frame Relay MIB
    ATM MIB (RFC 1695)
    Definitions of Managed Objects for Bridges (RFC 1493)
    Evolution of Interfaces Group of MIB-II (RFC 1573)
    Simple Network Management Protocol (SNMP) MIB II (RFC 1213)
    Remote Monitoring (RMON) MIB (RFC 1757)
    Switch Monitoring (SMON) MIB

    Network management

    Supported with CiscoWorks—CiscoView, CiscoWorks Resource Manager Essentials (RME)

    Cisco VPN Solution Center (VPNSC)

    Physical specifications

    Occupies one slot in a Cisco 7600 Series Router or Cisco Catalyst 6500 Series Switch

    Supports up to 12 Enhanced FlexWAN modules in a 13-slot chassis

    Requires Supervisor Engine 2 with Multilayer Switch Feature Card 2 (MSFC2) and Policy Feature Card 2 (PFC2) or Supervisor Engine 720

    Dimensions (H x W x D): 1.75 x 15.375 x 16 in.

    Weight: 8.4 lb

    Power

    135 watts power consumption per Enhanced FlexWAN module, 170 watts maximum power consumption with two port adapters

    Indicators

    Enhanced FlexWAN module status: green (operational); orange (faulty)

    Regulatory compliance

    CE marking

    Safety

    UL 60950
    CSA C22.2 No. 60950
    EN60950
    TS001
    IEC 60950
    AS/NZS3260

    EMC

    FCC Part 15 Class A
    ICES-003 Class A
    VCCI Class A
    EN55022 Class A
    EN55024
    EN50082-1
    EN61000-3-2
    EN61000-3-3
    EN61000-3-1
    CISPR22 Class A
    AS/NZS3548 Class A
    ETS-300 386

    Standards

    Telecommunications

    ITU-T G.610
    ITU-T G.703
    ITU-T G.707
    ITU-T G.783 Sections 9-10
    ITU-T G.784
    ITU-T G.803
    ITU-T G.813
    ITU-T G.825
    ITU-T G.826
    ITU-T G.841
    ITU-T G.957 Table 3
    ITU-T G.958
    ITU-T I.361
    ITU-T I.363
    ITU I.432
    ITU-T Q.2110
    ITU-T Q.2130
    ITU-T Q.2140
    ITU-T Q.2931
    ITU-T O.151
    ITU-T O.171
    ETSI ETS 300 417-1-1
    ACA TS 026 (1997)
    BABT /TC/139 (Draft 1e)

    Availability and Ordering

    Table 3.Ordering Information

    Description

    Part Number

    Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN module

    WS-X6582-2PA

    Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN module, spare

    WS-X6582-2PA=

    Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN module 256-MB memory

    MEM-CC-WAN-256M

    Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN module 256-MB memory, spare

    MEM-CC-WAN-256M=

    Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN module 512-MB memory

    MEM-CC-WAN-512M

    Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN module 512-MB memory, spare

    MEM-CC-WAN-512M=

    Additional Information

    SKU WS-X6582-2PA-RF
    Weight (Kg) 1
    Datasheet URL http://www.cisco.com/c/en/us/products/collateral/routers/7600-series-routers/products_data_sheet09186a00801df1d9.html
    Condition Refresh
    Module Type Switching Module

    WS-X6582-2PA-RF

    AED

    AED 0

    0